bumblebee team mailing list archive

[Thommie Rother <t.rother@xxxxxxxxxxxxx>]

Enabling nvidia card fails with 
[  263.394167] pci 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)

Dell Precision 7530

Linux odysseus3 5.5.1-1-default #1 SMP Tue Feb 4 06:56:24 UTC 2020
(1d61c83) x86_64 x86_64 x86_64 GNU/Linux

Tumbleweed 20200209


odysseus3:~ # dmesg | grep -C 10 bbswitch
[    4.153457] systemd[1]: Listening on udev Control Socket.
[    4.153532] systemd[1]: Listening on udev Kernel Socket.
[    4.153545] systemd[1]: Reached target Sockets.
[    4.154379] systemd[1]: Started Entropy Daemon based on the HAVEGE algorithm.
[    4.155216] systemd[1]: Starting Create list of static device nodes for the current kernel...
[    4.156696] systemd[1]: Starting Journal Service...
[    4.157561] systemd[1]: Starting Load Kernel Modules...
[    4.158366] systemd[1]: Starting Setup Virtual Console...
[    4.159060] systemd[1]: Started Create list of static device nodes for the current kernel.
[    4.159752] systemd[1]: Starting Create Static Device Nodes in /dev...
[    4.163194] bbswitch: loading out-of-tree module taints kernel.
[    4.163366] bbswitch: version 0.8
[    4.163371] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
[    4.163377] bbswitch: Found discrete VGA device 0000:01:00.0: \_SB_.PCI0.PEG0.PEGP
[    4.163391] ACPI Warning: \_SB.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20191018/nsarguments-59)
[    4.163590] bbswitch: detected an Optimus _DSM function
[    4.163601] pci 0000:01:00.0: enabling device (0006 -> 0007)
[    4.163661] bbswitch: disabling discrete graphics
[    4.165043] systemd[1]: Started Create Static Device Nodes in /dev.
[    4.171132] systemd[1]: systemd-vconsole-setup.service: Succeeded.
[    4.171344] systemd[1]: Started Setup Virtual Console.
[    4.171891] systemd[1]: Starting dracut ask for additional cmdline parameters...
[    4.181753] systemd[1]: Started dracut ask for additional cmdline parameters.
[    4.182326] systemd[1]: Starting dracut cmdline hook...
[    4.214110] systemd[1]: Started dracut cmdline hook.
[    4.214671] systemd[1]: Starting dracut pre-udev hook...
[    4.232388] systemd[1]: Started dracut pre-udev hook.
[    4.233388] systemd[1]: Starting udev Kernel Device Manager...
[    4.328472] tsc: Refined TSC clocksource calibration: 2207.998 MHz
[    4.328476] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x1fd3b6211b4, max_idle_ns: 440795230313 ns
[    4.328523] clocksource: Switched to clocksource tsc
[    4.376583] bbswitch: Succesfully loaded. Discrete card 0000:01:00.0 is off
[    4.377912] alua: device handler registered
[    4.378585] emc: device handler registered
[    4.379321] rdac: device handler registered
[    4.383215] systemd[1]: Started Journal Service.
[    4.387009] device-mapper: uevent: version 1.0.3
[    4.387110] device-mapper: ioctl: 4.41.0-ioctl (2019-09-16) initialised: dm-devel@xxxxxxxxxx
[    4.391476] sd 4:0:0:0: Attached scsi generic sg0 type 0
[    4.485375] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    4.485425] ACPI: Lid Switch [LID0]
[    4.485451] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
--
[   22.312636] xfs filesystem being mounted at /home supports timestamps until 2038 (0x7fffffff)
[   24.615418] BTRFS info (device nvme0n1p4): disk space caching is enabled
[   24.615419] BTRFS info (device nvme0n1p4): has skinny extents
[   24.617966] BTRFS info (device nvme0n1p4): enabling ssd optimizations
[   24.649133] systemd-journald[554]: Received client request to flush runtime journal.
[   24.694143] audit: type=1400 audit(1581515845.693:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="ping" pid=1238 comm="apparmor_parser"
[   25.129456] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   25.129457] Bluetooth: BNEP filters: protocol multicast
[   25.129460] Bluetooth: BNEP socket layer initialized
[   25.135060] NET: Registered protocol family 38
[   25.135488] bbswitch: enabling discrete graphics
[   25.348659] pci 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
[   25.408264] pci 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
[   25.449279] IPMI message handler: version 39.2
[   25.451110] ipmi device interface
[   25.475349] nvidia: module license 'NVIDIA' taints kernel.
[   25.475350] Disabling lock debugging due to kernel taint
[   25.479073] nvidia: module verification failed: signature and/or required key missing - tainting kernel
[   25.485955] nvidia-nvlink: Nvlink Core is being initialized, major device number 239
[   25.486168] NVRM: This is a 64-bit BAR mapped above 4GB by the system
               NVRM: BIOS or the Linux kernel, but the PCI bridge
--
[   96.636513] nf_conntrack: default automatic helper assignment has been turned off for security reasons and CT-based  firewall rule not found. Use the iptables CT target to attach helpers instead.
[  101.370561] userif-3: sent link down event.
[  101.370567] userif-3: sent link up event.
[  107.160119] input: MX Anywhere 2S Keyboard as /devices/virtual/misc/uhid/0005:046D:B01A.0005/input/input25
[  107.160300] input: MX Anywhere 2S Mouse as /devices/virtual/misc/uhid/0005:046D:B01A.0005/input/input26
[  107.160520] hid-generic 0005:046D:B01A.0005: input,hidraw4: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2S] on A8:6D:AA:EA:B7:0C
[  153.104358] Bluetooth: hci0: advertising data len corrected
[  211.615004] input: MX Anywhere 2S Keyboard as /devices/virtual/misc/uhid/0005:046D:B01A.0006/input/input28
[  211.615222] input: MX Anywhere 2S Mouse as /devices/virtual/misc/uhid/0005:046D:B01A.0006/input/input29
[  211.615719] hid-generic 0005:046D:B01A.0006: input,hidraw4: BLUETOOTH HID v0.03 Keyboard [MX Anywhere 2S] on A8:6D:AA:EA:B7:0C
[  263.394119] bbswitch: enabling discrete graphics
[  263.394167] pci 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
[  283.831865] wlan0: disconnect from AP fc:ec:da:fb:2e:be for new auth to fc:ec:da:fa:2e:be
[  283.835378] iwlwifi 0000:6f:00.0: expected hw-decrypted unicast frame for station
[  283.844854] wlan0: authenticate with fc:ec:da:fa:2e:be
[  283.852294] wlan0: send auth to fc:ec:da:fa:2e:be (try 1/3)
[  283.859131] wlan0: authenticated
[  283.860156] wlan0: associate with fc:ec:da:fa:2e:be (try 1/3)
[  283.869827] wlan0: RX ReassocResp from fc:ec:da:fa:2e:be (capab=0x431 status=0 aid=3)
[  283.879071] wlan0: associated
[  284.052415] userif-3: sent link down event.
[  284.052420] userif-3: sent link up event.
[  311.680386] bbswitch: enabling discrete graphics
[  311.680434] pci 0000:01:00.0: can't change power state from D3cold to D0 (config space inaccessible)
[  651.059206] BTRFS info (device nvme0n1p2): qgroup scan completed (inconsistency flag cleared)


** Attachment added: "Dell_Inc.-Precision_7530.tar.gz"
   https://bugs.launchpad.net/lpbugreporter/+bug/752542/+attachment/5327657/+files/Dell_Inc.-Precision_7530.tar.gz

-- 
You received this bug notification because you are a member of Bumblebee
Project, which is subscribed to Bumblebee.
Matching subscriptions: Bumblebee Team
https://bugs.launchpad.net/bugs/752542

Title:
  ACPI DSDT info

Status in Bumblebee:
  Confirmed
Status in bumblebee-project:
  New
Status in Launchpad Bug Reporter:
  Confirmed
Status in Ubuntu:
  Confirmed
Status in Debian:
  New
Status in Fedora:
  New
Status in Gentoo Linux:
  New
Status in openSUSE:
  Confirmed
Status in zUbuntu:
  New

Bug description:
  This is for people with a hybrid graphics configuration to be able to
  submit the DSDT information: This includes nVidia Optimus and AMD
  Hybrid Graphics.

  To gather information about the laptop model, install dmidecode. For the DSDT/SSDT
  files, install the acpidump and iasl tools:

      sudo apt-get install acpidump iasl dmidecode

  or (on Fedora):

      sudo yum install pmtools iasl dmidecode

  Then use the script from http://lekensteyn.nl/files/get-acpi-info.sh to create the
  tarball containing information about the laptop model, PCI hardware and ACPI tables.
  To do so, run the following commands in a terminal:

  
      wget http://lekensteyn.nl/files/get-acpi-info.sh
      sh get-acpi-info.sh

  This will create a tar.gz file that you can attach to the bug report. In the comment
  itself, please include a link to the product page of the model (if available).

  This information will allow the full development of hybrid graphics
  features for Linux. Thanks for your help!

To manage notifications about this bug go to:
https://bugs.launchpad.net/bumblebee/+bug/752542/+subscriptions