curtin-dev team mailing list archive
-
curtin-dev team
-
Mailing list archive
-
Message #02627
Re: [Merge] ~xypron/curtin:noefivar into curtin:master
Review: Needs Fixing
Thank your Heinrich, the general idea looks fine but I would like a few fixes first.
Diff comments:
> diff --git a/curtin/commands/install_grub.py b/curtin/commands/install_grub.py
> index 79b6695..0b6db9b 100644
> --- a/curtin/commands/install_grub.py
> +++ b/curtin/commands/install_grub.py
> @@ -371,7 +371,10 @@ def install_grub(devices, target, uefi=None, grubcfg=None):
>
> LOG.debug("installing grub to target=%s devices=%s [replace_defaults=%s]",
> target, devices, grubcfg.get('replace_default'))
> - update_nvram = config.value_as_boolean(grubcfg.get('update_nvram', True))
> + if (os.path.exists('/sys/firmware/efi/efivars')):
please remove the redundant outer parenthesis
> + update_nvram = config.value_as_boolean(grubcfg.get('update_nvram', True))
> + else:
> + update_nvram = False
I would like a debug log in this case, as we are potentially ignoring the user config if they have explictly requested update_nvram=True.
> distroinfo = distro.get_distroinfo(target=target)
> target_arch = distro.get_architecture(target=target)
> rhel_ver = (distro.rpm_get_dist_id(target)
> diff --git a/debian/README.source b/debian/README.source
> new file mode 100644
> index 0000000..ccf4119
> --- /dev/null
> +++ b/debian/README.source
Please remove
> @@ -0,0 +1,5 @@
> +To pull a new upstream snapshot, given lp:curtin in ../trunk:
> +
> + ./debian/new-upstream-snapshot ../trunk
> +
> +Then, edit changelog and look at entries in 'new-changes.log'.
> diff --git a/debian/changelog b/debian/changelog
> new file mode 100644
> index 0000000..da79e7c
> --- /dev/null
> +++ b/debian/changelog
Please remove
> @@ -0,0 +1,1566 @@
> +curtin (22.1-0ubuntu1) kinetic; urgency=medium
> +
> + * New upstream release. (LP: #1979687)
> + - deb: fix dependencies [Dan Bungert]
> + - tox: drop xenial-py3 from default env list [Dan Bungert]
> + - block/v2: preserve disk label id [Dan Bungert]
> + - block/v2: docs for partition_type [Dan Bungert]
> + - block/v2: unit tests for partition_type [Dan Bungert]
> + - block/v2: raw partition table codes for gpt [Dan Bungert]
> + - block/v2: allow setting raw partition_type value [Dan Bungert]
> + - Make sure curthooks do not discard supplied proxy settings
> + [Olivier Gayot]
> + - block/v2: resize-friendly ordering of wipe [Dan Bungert]
> + - block/v2: handle resize when no format action [Dan Bungert]
> + - block/v2: resize of ntfs [Dan Bungert]
> + - vmtests: remove out of date skip [Dan Bungert]
> + - block: provide get_resize_fstypes [Dan Bungert]
> + - Add support for resize of ext{2,3,4} [Dan Bungert]
> + - Add riscv64 to supported UEFI architectures [William Wilson]
> + - block_meta_v2: call make_dname when required [Michael Hudson-Doyle]
> + - examples: even more tweaks for v2 [Michael Hudson-Doyle]
> + - Add riscv64 support [Heinrich Schuchardt]
> + - examples: stop assuming curtin accounts for overhead of logical
> + partitions [Michael Hudson-Doyle]
> + - block_meta_v2: zero start of partitions before they are created
> + [Michael Hudson-Doyle]
> + - examples: enlarge / for some more vmtests [Michael Hudson-Doyle]
> + - skip BionicTestPartitionExistingRAID.test_correct_ptype
> + [Michael Hudson-Doyle]
> + - examples: boost size of / in multipath-reuse.yaml [Michael Hudson-Doyle]
> + - examples: add offsets to preserved partitions [Michael Hudson-Doyle]
> + - block_meta_v2: change how we invoke sfdisk again, restore partprobe call
> + [Michael Hudson-Doyle]
> + - block_meta_v2: fix partitioning a device with sector size != 512
> + [Michael Hudson-Doyle]
> + - block_meta_v2: fix implicit offset calculation for dos partitions
> + [Michael Hudson-Doyle]
> + - block_meta_v2: do not use aliases for partition types
> + [Michael Hudson-Doyle]
> + - Remove CentOS 6 tests. [Michael Hudson-Doyle]
> + - vmtests: boost the size of / in a few tests [Michael Hudson-Doyle]
> + - examples: sleep after creating bcache device in preserve-bcache.yaml
> + [Michael Hudson-Doyle]
> + - vmtests: fix parted invocation in partition-existing-raid.yaml
> + [Michael Hudson-Doyle]
> + - vmtests: bump VM memory size to 2048 MiB for all tests
> + [Michael Hudson-Doyle]
> + - vmtests: drop assertion that clear-holders ran [Michael Hudson-Doyle]
> + - block_meta_v2: a few more fixes for v2 partitioning
> + [Michael Hudson-Doyle]
> + - block_meta: call realpath on partition node returned by sfdisk
> + [Michael Hudson-Doyle]
> + - Add rocky linux as a RHEL-like variant [Dimitri John Ledkov]
> + - Update pylint version in tox.ini [Michael Hudson-Doyle]
> + - block_meta: implement v2 partitioning [Michael Hudson-Doyle]
> + - Stop running CI against Python 2 [Michael Hudson-Doyle]
> + - Make sure curthooks do not discard APT preferences [Olivier Gayot]
> + - Remove leftover debug print statement [Olivier Gayot]
> + - Fix format of examples/apt-source.yaml [Olivier Gayot]
> + - Implement support for APT preferences in apt-config [Olivier Gayot]
> + - build-deb: changelog gen with dch [Dan Bungert]
> + - vmtests uefi: relax the uefi check [Dan Bungert]
> + - block: output partition device path [Dan Bungert]
> + - support version 2 curtin storage configs [Michael Hudson-Doyle]
> + - system-upgrade: lookup os family [Dan Bungert]
> + - add preserve: true support to the image action [Michael Hudson-Doyle]
> +
> + -- Dan Bungert <daniel.bungert@xxxxxxxxxxxxx> Mon, 27 Jun 2022 16:24:54 -0600
> +
> +curtin (21.3-0ubuntu1) jammy; urgency=medium
> +
> + * New upstream release.
> + - version to 21.3 [Dan Bungert] (LP: #1953410)
> + - distro: handle ID_LIKE [Dan Bungert] (LP: #1934513)
> + - block_meta: pass handlers dict to all handlers [Michael Hudson-Doyle]
> + - block_meta: refactor partition verification slightly
> + [Michael Hudson-Doyle]
> + - block-meta: support using a raw image containing LVM volumes
> + [Alexsander de Souza]
> + - lsblk: adjust output to match old format [Dan Bungert]
> + - curtin.commands.extract: Factor preparing sources for copying into a
> + class [Michael Hudson-Doyle]
> + - apt_config: tweaks to allow some functionality in partial tree as
> + non-root [Michael Hudson-Doyle]
> + - Add integration tests for some partitioning operations
> + [Michael Hudson-Doyle]
> + - command/apt: disable_components [Dan Bungert]
> + - commands/apt: use python-apt for sources.list [Dan Bungert]
> + - curthooks: always install shim-signed if available (when UEFI booted)
> + [Michael Hudson-Doyle]
> + - tox,control: fix jenkins CI jobs [Dan Bungert]
> + - tests: update to demonstrate python-apt functional [Dan Bungert]
> + - block:lvm: search encrypted volumes for LVM
> + [Lukas Märdian] (LP: #1940687)
> + - mdadm: allow installation to a syncing array
> + [Michael Hudson-Doyle] (LP: #1939563)
> + - vmtests: s/Groovy/Impish [Dan Bungert]
> + - tweak making mountpoints private some more [Michael Hudson-Doyle]
> + - curthooks: do not unconditionally copy e/n/interfaces to target
> + [Michael Hudson-Doyle]
> + - block: handle /dev/mapper/* in dev_path() [Lukas Märdian]
> + - curthooks: do not add lvm devices filter when / is mutipathed
> + [Michael Hudson-Doyle] (LP: #1895192)
> + - Extend the 'format' schema for unknown fstypes [Dan Bungert]
> + - move making mounts recursively private into do_unmount
> + [Michael Hudson-Doyle]
> + - disk_handler: fix partitioning a new RAID [Michael Hudson-Doyle]
> + - curthooks:setup_zipl: use proper device path in root= arg for cmdline
> + [Lukas Märdian]
> + - fix tearing down ChrootableTarget when mounts appear while it is set up
> + [Michael Hudson-Doyle] (LP: #1928839, #1934775)
> + - Don't override PYTHON env var in bin/curtin [Dan Bungert]
> + - disk_handler: check wipe field when deciding whether to reformat raids
> + [Michael Hudson-Doyle] (LP: #1932976)
> + - storage_config: properly handle raid containers [Michael Hudson-Doyle]
> + - pylintrc: explicitly list the DISTROS generated-members [Paride Legovini]
> + - block_meta: make preserve: true on a raid in a container work
> + [Michael Hudson-Doyle]
> + - Fix NVMe validation for namespaces with UUID
> + [Ryan Norwood] (LP: #1925399)
> + - meta_simple: handle multiple disks in storage config with dd-image
> + [Dan Bungert] (LP: #1925722)
> + - Use /proc/filesystems to decide passno
> + [Dan Bungert] (LP: #1717584, LP: #1785354)
> + - block_meta: fix wiping of existing dasd partition [Michael Hudson-Doyle]
> + - block_meta: pass --yes to lvcreate alongside --wipesignatures=y
> + [Michael Hudson-Doyle] (LP: #1923487)
> + - remove 'strict' arguments to block.wipe_volume and block.quick_zero
> + [Michael Hudson-Doyle] (LP: #1868177)
> + - swap: use dd to allocate swapfiles on ext2 and ext3
> + [Michael Hudson-Doyle] (LP: #1918990)
> + - storage_config: return one type: disk action per multipathed disk
> + [Michael Hudson-Doyle] (LP: #1893818)
> + - vmtest/centos: handle different paths to grub config [Ryan Harper]
> +
> + -- Dan Bungert <daniel.bungert@xxxxxxxxxxxxx> Mon, 06 Dec 2021 17:02:22 -0700
> +
> +curtin (21.2-0ubuntu1) hirsute; urgency=medium
> +
> + * New upstream release.
> + - Release 21.2 [Michael Hudson-Doyle] (LP: #1913357)
> + - Revert "apt_config: stop using the deprecated apt-key command"
> + [Michael Hudson-Doyle] (LP: #1912801)
> + - partition_handler: fix NameError when reusing a vtoc partition
> + [Michael Hudson-Doyle]
> + - install_grub: convert in-target EFI loader path to ESP path.
> + [Dimitri John Ledkov] (LP: #1906379)
> + - block: fixes for verifying existing multipath partitions
> + [Michael Hudson-Doyle]
> + - multipath: use udev DM_NAME for find_mpath_id, fix 4k sector calc
> + [Michael Hudson-Doyle] (LP: #1878041)
> +
> + -- Michael Hudson-Doyle <michael.hudson@xxxxxxxxxx> Wed, 27 Jan 2021 16:44:21 +1300
> +
> +curtin (21.1-0ubuntu1) hirsute; urgency=medium
> +
> + * New upstream release.
> + - Release 21.1 [Michael Hudson-Doyle] (LP: #1911841)
> + - This adds arm64 compatibility for RH installations [Mark Klein]
> + - vmtest: add Hirsute release classes, tool to add vmtest class
> + [Ryan Harper]
> + - vmtest: fix image-sync after maas URL stream rename
> + [Ryan Harper] (LP: #1908543)
> + - storage_config: set ptable to vtoc for 'virt' dasds as well as 'ECKD'
> + [Michael Hudson-Doyle]
> + - install_grub: Fix bootloader-id for RHEL systems, must be redhat
> + [Ryan Harper] (LP: #1906543)
> + - vmtests: remove LP: #1888726 skip_by_date decorators
> + - storage_config: only produce type: dasd actions for ECKD dasds
> + [Michael Hudson-Doyle]
> + - storage_config: handle some FBA dasd oddities [Michael Hudson-Doyle]
> + - apt_config: stop using the deprecated apt-key command
> + [Nishanth Aravamudan] (LP: #1892494)
> + - allow adding a vtoc partition without a device id [Michael Hudson-Doyle]
> + - simplify dasdview parsing code [Michael Hudson-Doyle]
> + - fix construction of DasdPartitionTable from fdasd output
> + [Michael Hudson-Doyle]
> + - Don't install grub if it is already found on CentOS/RHEL
> + [Lee Trager] (LP: #1895067)
> + - vmtests: Replace newly added Eoan test with Groovy [Ryan Harper]
> + - vmtests: test using a disk with RAID partition on it directly in a RAID
> + [Michael Hudson-Doyle]
> + - fix verification of vtoc partitions [Michael Hudson-Doyle] (LP: #1899471)
> + - create an empty vtoc in disk_handler [Michael Hudson-Doyle]
> + - remove unused parameters from dasd code [Michael Hudson-Doyle]
> + - remove support for calling get_path_to_storage_volume on a dasd action
> + [Michael Hudson-Doyle]
> + - clear-holders: fix identification of multipath partitions
> + [Ryan Harper] (LP: #1900900)
> + - vmtests: remove skip_by_dates for now-fixed bcache issue
> + - debian/rules: drop PKG_VERSION and UPSTREAM_VERSION [Paride Legovini]
> + - deb packaging: fully cleanup directory tree after build
> + [Paride Legovini] (LP: #1899698)
> + - udevadm_info should use maxsplit=1 instead of maxsplit=2
> + [Sergey Bykov] (LP: #1895021)
> + - vmtests/multipath-lvm: dont assume device-mapper block names
> + [Ryan Harper] (LP: #1898758)
> + - vmtest: fix the groovy arm64 subarch [Paride Legovini] (LP: #1898757)
> + - tools/curtainer: dearmor gpg key and use apt-key add
> + [Ryan Harper] (LP: #1898609)
> + - Support imsm external metadata RAID containers
> + [Gyorgy Szombathelyi] (LP: #1893661)
> + - Drop tools/new-upstream-snapshot [Paride Legovini]
> +
> + -- Michael Hudson-Doyle <michael.hudson@xxxxxxxxxx> Fri, 15 Jan 2021 17:07:35 +1300
> +
> +curtin (20.2-0ubuntu1) groovy; urgency=medium
> +
> + * New upstream release.
> + - Release 20.2 (LP: #1896947)
> + - Fix the py3 pylint ci run [Paride Legovini]
> +
> + -- Paride Legovini <paride.legovini@xxxxxxxxxxxxx> Fri, 25 Sep 2020 22:44:41 +0200
> +
> +curtin (20.1-29-g81144052-0ubuntu1) groovy; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: Fix multiple issues with vmtest on master
> + - Refactor uefi_remove_duplicates into find/remove functions for reuse
> + - distro: run apt-get clean after dist-upgrade, install, upgrade
> + - curthooks: UEFI remove dupes: don't remove BootCurrent, config option
> + (LP: #1894217)
> + - Pin the dependency on pyrsistent [Paride Legovini]
> + - restore default of grub.update_nvram to True in install_grub
> + [Michael Hudson-Doyle]
> + - block: disk_to_byid_path handle missing /dev/disk/by-id directory
> + (LP: #1876258)
> + - UEFI: Handle missing BootCurrent entry when reordering UEFI entries
> + (LP: #1789650)
> + - dasd: fix off-by-one device_id devno range check [Paride Legovini]
> + - curthooks: uefi_find_grub_device_ids handle type:mount without path
> + (LP: #1892242)
> + - netplan openvswitch yaml changed (LP: #1891608)
> + - tools/curtainer: do not wait for snapd.seeded.service
> + - tools/curtainer: enable using ubuntu-minimal images
> + - vmtests: add Groovy [Paride Legovini]
> + - Drop the Eoan vmtests (EOL) [Paride Legovini]
> + - tools: rename remove-vmtest-release to vmtest-remove-release
> + - Snooze the tests failing because of LP: #1861941 for two more months
> + [Paride Legovini]
> + - LP: #1671951 is Fix Released => Drop the PPA [Paride Legovini]
> + - swaps: handle swapfiles on btrfs (LP: #1884161)
> + - curtainer: fail is masking of zfs-mount or zfs-share fails
> + [Paride Legovini]
> + - multipath: handle multipath nvme name fields correctly (LP: #1878041)
> + - curtainer: mask the zfs-mount and zfs-share services [Paride Legovini]
> + - tools/jenkins-runner: shuffle test-cases to randomize load
> + [Paride Legovini]
> + - Add Trusty/UEFI/HWE-X vmtest, drop realpath add, drop shell code
> + - LP: #1881977 - Install realpath on Trusty UEFI. [Lee Trager]
> + - vmtests: fix PreservePartitionWipeVg storage config
> + - Fix mdraid name creates broken configuration
> + [James Falcon] (LP: #1803933)
> + - vmtests: update skiptests
> + - vmtest: allow installed centos images to reboot (LP: #1881011)
> +
> + -- Paride Legovini <paride.legovini@xxxxxxxxxxxxx> Mon, 14 Sep 2020 17:53:15 +0200
> +
> +curtin (20.1-0ubuntu1) groovy; urgency=medium
> +
> + * New upstream release.
> + - Release 20.1 (LP: #1880741)
> + - Handle multiple separators which were found in TestAllindata vmtest
> + - verify_ptable_flag: dos primary partitions use ptable_uuid map for flag
> + (LP: #1878890)
> + - net_meta: add disabled mode to skip writing any network config
> + [Lucas Moura]
> + - vmtest: trigger guest panic to fail fast
> + - Replace grub-shell-helper with install_grub command
> + - vmtest-sync-images: update the URL of the maas streams [Paride Legovini]
> + - Replace references to old team manager with new team manager
> + [James Falcon]
> + - tox: pin flake8 to version and add a tip-flake8 environment
> + [Paride Legovini]
> + - Fix flake8 E741 warning [Lucas Moura]
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Tue, 26 May 2020 16:31:39 -0500
> +
> +curtin (19.3-68-g6cbdc02d-0ubuntu1) groovy; urgency=medium
> +
> + * New upstream snapshot.
> + - Makefile: make adjustments to call lint/style tools via python module
> + - block-discover: ignore invalid id_serial/id_wwn values (LP: #1876848)
> + - Fix handing of reusing msdos partitions and flags (LP: #1875903)
> + - block.detect_multipath: ignore fake "devices" from /proc/mounts
> + [Michael Hudson-Doyle] (LP: #1876626)
> + - udev: use shlex.quote when shlex.split errors on shell-escape chars
> + (LP: #1875085)
> + - lvm: don't use vgscan --mknodes
> + - vmtest: rsync don't cross filesystem boundaries when copying
> + (LP: #1873909)
> + - vmtest: basic/basic_scsi adjust collect/tests for unstable device names
> + (LP: #1874100)
> + - Add unittests for partition_handler calc_[dm]_part_info and kpartx paths
> + - multipath: attempt to enforce /dev/mapper/mpath files are symlinks
> + - block-meta: device mapper partitions may be block devices not links
> + - Default to dm_name being id if empty earlier in dm_crypt_handler()
> + [Łukasz 'sil2100' Zemczak] (LP: #1874243)
> + - storage: correct declared schema draft version for storage schema
> + - test_clear_holders: add missing zfs mock
> + - Mock out zfs_supported to prevent attempting to load kernel modules
> + - block-meta: skip wipe device paths if not present (LP: #1869075)
> + - unittest: do not allow util.subp by default (LP: #1873913)
> + - curthooks: support multiple ESP on UEFI bootable systems
> + - block-discover: handle missing multipath 'path' data, use DM_NAME
> + (LP: #1873728)
> + - lvm-over-multipath: handle lookups of multipath members (LP: #1869075)
> + - block-meta: don't filter preserve=true devices, select by wipe
> + (LP: #1837214)
> + - vmtest: basic use dname to lookup disk with multiple partitions
> + - block-meta: Don't check the ptable type of a disk with no ptable
> + - curthooks: always use ChrootableTarget.subp when calling efibootmgr
> + - storage: enable and use multipath during storage configuration
> + (LP: #1869075)
> + - block-discover: detect nvme multipath devices (LP: #1868109)
> + - clear-holders: Tolerate vgchange errors during discovery (LP: #1870037)
> + - block-meta: handle preserve with vtoc ptable (LP: #1871158)
> + - vmtest: use -partition file for TestReuseRAIDMemberPartition class
> + - format: extra_options should be a list type
> + - tox: add pyflakes to the default tox run [Paride Legovini]
> + - storage_config: Add 'extra_options' parameter to allow custom mkfs
> + (LP: #1869069)
> + - Add support for installing Ubuntu Core 20 images
> + - tox.ini: Fix issues with newer tox on focal
> + - vmtest: Fix test_basic.py to run on s390x (LP: #1866663)
> + - vmtest: use util.load_file for loading collect files
> + - block-meta: refactor storage_config preserve and wipe settings
> + (LP: #1837214)
> + - block-discover: skip 'multipath' key in blockdevice if mpath name is None
> + - tox: all py27 environments should use the base py27 deps
> + - uefi: refactor efibootmg handling to support removing duplicate entries
> + (LP: #1864257)
> + - tox: pin setuptools < 45 to allow installing py27 in virtenv
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 07 May 2020 15:43:37 -0500
> +
> +curtin (19.3-27-g437caaa9-0ubuntu1) focal; urgency=medium
> +
> + * New upstream snapshot.
> + - block-discover: add dasd parser and emit dasd storage config
> + (LP: #1862849)
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 27 Feb 2020 13:11:46 -0600
> +
> +curtin (19.3-26-g82f23e3d-0ubuntu1) focal; urgency=medium
> +
> + * New upstream snapshot.
> + - install-grub: refactor uefi partition/disk searching (LP: #1862846)
> + - doc: update Canonical contributors URL [Paul Tobias]
> + - block-discover: detect additional "extended" partition types in MBR
> + (LP: #1861251)
> + - vmtests: skip focal bcache tests due to kernel bug
> + - net/deps.py: detect openvswitch cfg and install openvswitch packages
> + - vmtest: collection of vmtest related fixes to make things triple green
> + - clear-holders: umap the parent mpath to wipe the underlying partitions
> + - vmtests: bump fixby date out and fix false positive when date passes
> + (LP: #1855148)
> + - vmtests: drop disco tests using a tool to automate the process
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 13 Feb 2020 21:08:59 -0600
> +
> +curtin (19.3-17-g50ffca46-0ubuntu1) focal; urgency=medium
> +
> + * New upstream snapshot.
> + - clear-holders: ensure we wipe device even if multipath enabled not not mp
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 30 Jan 2020 12:52:02 -0600
> +
> +curtin (19.3-16-g941c43ff-0ubuntu1) focal; urgency=medium
> +
> + * New upstream snapshot.
> + - block_meta: use reliable fs_spec entries for block devices (LP: #1851899)
> + - multipath: handle removal of multipath partitions correctly
> + (LP: #1857042)
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 30 Jan 2020 12:49:27 -0600
> +
> +curtin (19.3-14-ga45a54ca-0ubuntu1) focal; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtests: skip Focal deploying Centos70 ScsiBasic
> + - vmtests: fix network mtu tests, separating ifupdown vs networkd
> + - doc: Fix kexec documentation bug. [Mike Pontillo]
> + - vmtests: Add Focal Fossa
> + - centos: Add centos/rhel 8 support, enable UEFI Secure Boot
> + [Lee Trager] (LP: #1788088)
> + - Bump XFS /boot skip-by date out a while
> + - vmtest: Fix a missing unset of OUTPUT_FSTAB
> + - curthooks: handle s390x/aarch64 kernel install hooks (LP: #1856038)
> + - clear-holders: handle arbitrary order of devices to clear
> + - curthooks: only run update-initramfs in target once (LP: #1842264)
> + - test_network_mtu: bump fixby date for MTU tests
> + - block-discover: don't skip partitions on virtual devices (LP: #1853018)
> + - block-discover: handle partial probe data (LP: #1852351)
> + - Fix parsing of squashfs: uri prefix for installation sources
> + [Daniel Fox] (LP: #1851271)
> + - Release 19.3 (LP: #1851390)
> + - Update HACKING.rst with Josh Powers contact info.
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 16 Jan 2020 15:17:41 -0600
> +
> +curtin (19.2-44-g8e618b34-0ubuntu1) focal; urgency=medium
> +
> + * New upstream snapshot.
> + - t/jenkins-runner: replace $EPOCHSECONDS with 'date +%s' [Paride Legovini]
> + - curthooks: skip setup_kernel_img_conf on eoan and newer (LP: #1847257)
> + - block_meta: use lookup for wwn, fix fallback from wwn, serial, path
> + (LP: #1849322)
> + - vmtest: Adjust TestScsiBasic to use dnames to find correct disk
> + - schema: Add ptable value 'unsupported' (LP: #1848535)
> + - tools/xkvm: add -nographic to speed up devopt query
> + - test_block_dasd: fix random_device_id to only generate valid IDs
> + (LP: #1849549)
> + - vmtest: update skip_if_arch message
> + - Add skip_by_date to eoan ipv6 vlan test
> + - storage_config: interpret value, not presence, of
> + DM_MULTIPATH_DEVICE_PATH [Michael Hudson-Doyle]
> + - vmtest: Add skip_by_date for test_ip_output on eoan + vlans
> + - block-schema: update raid schema for preserve and metadata
> + - dasd: update partition table value to 'vtoc' (LP: #1847073)
> + - clear-holders: increase the level for devices with holders by one
> + (LP: #1844543)
> + - tests: mock timestamp used in collect-log file creation (LP: #1847138)
> + - ChrootableTarget: mount /run to resolve lvm/mdadm issues which
> + require it.
> + - block-discover: handle multipath disks (LP: #1839915)
> + - Handle partial raid on partitions (LP: #1835091)
> + - install: export zpools if present in the storage-config (LP: #1838278)
> + - block-schema: allow 'mac' as partition table type (LP: #1845611)
> + - jenkins-runner: disable the lockfile timeout by default [Paride Legovini]
> + - curthooks: use correct grub-efi package name on i386 (LP: #1845914)
> + - vmtest-sync-images: remove unused imports [Paride Legovini]
> + - vmtests: use file locking on the images [Paride Legovini]
> + - vmtest: enable arm64 [Paride Legovini]
> + - Make the vmtests/test_basic test suite run on ppc64el [Paride Legovini]
> + - vmtests: separate arch and target_arch in tests [Paride Legovini]
> + - vmtests: new decorator: skip_if_arch [Paride Legovini]
> + - vmtests: increase the VM memory for Bionic
> + - vmtests: Skip Eoan ZFS Root tests until bug fix is complete
> + - Merge branch 'fix_merge_conflicts'
> + - util: add support for 'tbz', 'txz' tar format types to sanitize_source
> + (LP: #1843266)
> + - net: ensure eni helper tools install if given netplan config
> + (LP: #1834751)
> + - d/control: update Depends for new probert package names
> + [Dimitri John Ledkov]
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Fri, 01 Nov 2019 14:06:13 -0500
> +
> +curtin (19.2-9-g38ce22b0-0ubuntu1) eoan; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: fix typo in EoanBcacheBasic test name
> + - storage schema: Update nvme wwn regex to allow for nvme wwid format
> + (LP: #1841321)
> + - Allow EUI-64 formatted WWNs for disks and accept NVMe partition naming
> + [Reed Slaby] (LP: #1840524)
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Wed, 28 Aug 2019 11:40:32 -0500
> +
> +curtin (19.2-6-g88a1a7ec-0ubuntu1) eoan; urgency=medium
> +
> + * New upstream snapshot.
> + - Makefile: split Python 2 and Python 3 unittest targets apart
> + * debian/*: drop python-curtin, making the package Python 3-only.
> + * debian/control: drop Build-Depends on linting tools, they haven't been
> + used by the upstream test suite in a while.
> +
> + -- Daniel Watkins <oddbloke@xxxxxxxxxx> Wed, 21 Aug 2019 13:29:50 -0400
> +
> +curtin (19.2-5-g44997e86-0ubuntu1) eoan; urgency=medium
> +
> + * New upstream snapshot.
> + - Switch to the new btrfs-progs package name, with btrfs-tools fallback.
> + [Dimitri John Ledkov]
> + - vmtest: bump ram size on Zfs tests for Disco and Eoan
> + - vmtest: drop Cosmic test cases
> + - unittests: mock subp in ChrootableTarget _exit_ test cases
> + - util.ChrootableTarget: skip rename of resolv.conf if not present in
> + target (LP: #1834382)
> +
> + -- Daniel Watkins <oddbloke@xxxxxxxxxx> Thu, 15 Aug 2019 12:27:10 -0400
> +
> +curtin (19.2-0ubuntu1) eoan; urgency=medium
> +
> + * New upstream release.
> + - Release 19.2 (LP: #1836951)
> + - storage_config: a missing ID_PART_TABLE_TYPE key means no ptable
> + [Michael Hudson-Doyle]
> + - vmtests: drop skip_by_date decorators for bug 1813228
> + - block: Add opportunistic zkey encryption if supported
> + - vmtests: add support for CURTIN_VMTEST_APT_PROXY
> + - vmtests: add use of CURTIN_VMTEST_ prefixed envvars to image sync
> + - vmtest: dont raise SkipTest in class definition
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Wed, 17 Jul 2019 15:39:33 -0500
> +
> +curtin (19.1-7-g37a7a0f4-0ubuntu1) eoan; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtests: determine block name via dname when verifying volume groups
> + - vmtest: add Centos66/Centos70 FromBionic release and re-add tests
> + - block-discover: add cli/API for exporting existing storage to config
> + - vmtest: refactor test_network code for Eoan
> + - curthoooks: disable daemons while reconfiguring mdadm
> + [Michael Hudson-Doyle] (LP: #1829325.)
> + - mdadm: fix install to existing raid [Michael Hudson-Doyle] (LP: #1830157)
> + - apt_proxy env var set but empty => do not setup any proxy
> + [Paride Legovini]
> +
> + -- Chad Smith <chad.smith@xxxxxxxxxxxxx> Wed, 05 Jun 2019 10:45:42 -0600
> +
> +curtin (19.1-0ubuntu1) eoan; urgency=medium
> +
> + * New upstream release.
> + - release 19.1
> + - vmtest: add missing skip_by_date on Eoan test_network_mtu
> + - vmtest: remove skip_by_date on Disco Allindata test
> + - block: support multipath devices in lookup and partition_kname
> + (LP: #1813228)
> + - grub: add grub config to control os_prober,terminal settings in target
> + - vmtest: add eoan tests [Paride Legovini]
> + - vmtest: add dependency on python3-jsonschema [Paride Legovini]
> + - Pylint compatibility with Python 3.7 [Paride Legovini] (LP: #1828229)
> + - vmtest: disable disco multipath test
> + - vmtests: bump network mtu tests out a bit
> + - Fix up yaml.load warnings
> + - vmtest: disable trusty, it's dead jim
> +
> + -- Daniel Watkins <oddbloke@xxxxxxxxxx> Wed, 22 May 2019 10:26:52 -0400
> +
> +curtin (18.2-26-gd8e45d79-0ubuntu1) eoan; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: reenable UEFI 4k tests, which got dropped when fixing
> + subclassing.
> + - vmtests: Add test_kernel_img_conf stub for PsuedoVMBaseClass
> + - curthooks: chzdev_import must encode data if provided (LP: #1825007)
> + - vmtest: test for kernel-img conf on ubuntu only
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Tue, 23 Apr 2019 09:32:56 -0500
> +
> +curtin (18.2-22-g08bf6ff7-0ubuntu1) disco; urgency=medium
> +
> + * New upstream snapshot.
> + - Setup kernel-img.conf like base-installer/live-installer did.
> + [Dimitri John Ledkov] (LP: #1534162)
> + - zfs: pass pool and fs properties to zpool_create
> + [Jean-Baptiste Lallement] (LP: #1823682)
> + - block_meta: pass lvm_partition size through human2bytes
> + [Michael Hudson-Doyle]
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 11 Apr 2019 14:22:33 -0500
> +
> +curtin (18.2-19-g36351dea-0ubuntu1) disco; urgency=medium
> +
> + * New upstream snapshot.
> + - clear-holders: refactor bcache shutdown and add longer timeout
> + (LP: #1796292)
> + - schema-validate-storage: remove unused imports [Paride Legovini]
> + - add subcommand schema for storage-config validation
> + - clear-holders: wipe raid members at data offsets when not assembled
> + (LP: #1815018)
> + - Add support for s390 DASD devices
> + - vmtest: skip DiscoTestAllindata while initrd lacks crypto modules
> + - block_meta: allow passing a dm_crypt key by keyfile
> + [Michael Hudson-Doyle]
> + - ChrootableTarget: add /run to mounts for redhat targets (LP: #1815666)
> + - vmtest: consolidate vm mem config, defaults via release, env override
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Wed, 03 Apr 2019 14:46:09 -0500
> +
> +curtin (18.2-10-g7afd77fa-0ubuntu1) disco; urgency=medium
> +
> + * New upstream snapshot.
> + - Support for multi-layers images fsimage-layered:// URI
> + [Jean-Baptiste Lallement]
> + - dname: relax dname req for disk serial/wwn presence for compatibility
> + (LP: #1735839)
> + - flake8: fix some E117 over-indented issues [Paride Legovini]
> + - bcache: ensure partitions on bcache devices are detected as partition
> + - vmtest: bump skip_by_date out a year for trusty bcache bug
> + - Fix typo in doc/topics/integration-testing.rst. [Paride Legovini]
> + - flake8: Fix two issues found with new version of flake8
> + - clear-holders: handle FileNotFound when probing for bcache device slaves
> + (LP: #1811117)
> + - vmtests: network mtu fix-by bump to post 19.04 release
> + - vmtest: Fix bug preventing explicit disabling of system_upgrade.
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Wed, 27 Feb 2019 16:43:21 -0600
> +
> +curtin (18.2-0ubuntu1) disco; urgency=medium
> +
> + * New upstream release (18.2).
> + - Release 18.2
> + - Adjust helpers/common to edit GRUB_CMDLINE_LINUX_DEFAULT in place.
> + (LP: #1527664)
> + - dname: persistent names based on serial or wwn (LP: #1735839)
> + - Fix bug in is_swap_device if a device was smaller than page_size.
> + (LP: #1803672)
> + - vmtest: add disco tests [Joshua Powers]
> + - unittest: change directory to tmpdir for testing relative files.
> + - Add clear-holders to meta-simple (LP: #1786736)
> + - vmtests: check install log for Out of memory kernel messages and fail
> + - unittest: correctly use tmpdir for my.img [Joshua Powers] (LP: #1803611)
> + - block_meta: use wipe config when clearing partitions (LP: #1800153)
> + - tests: fix vmtests for apt perserve_source_list changes
> + - apt: Use new format apt config when writing preserve_sources_list.
> + (LP: #1735950)
> + - vmtests: multipath mount /home with nofail and validate in unittest
> + - vmtests: fix common collect scripts to not exit failure.
> + - vmtest: handle collect disk unpack failure
> + - vmtests: dont use multiple subclasses in uefi 4k tests
> + - vmtests: disable snapd/seeding to avoid boot hang
> + - jenkins-runner: fix when using --filter only
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 06 Dec 2018 12:11:01 -0600
> +
> +curtin (18.1-59-g0f993084-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - distro: fix system_upgrade command using string instead of function
> + (LP: #1796968)
> + - Capture stdout when using lxc file push
> + - vmtest: boot ephemeral with 'ro' on the kernel command line.
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Wed, 10 Oct 2018 11:22:30 -0500
> +
> +curtin (18.1-56-g3aafe77d-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: Fix typo in skip-by-date.
> + - vmtest: kick skip-by-date for 1671951.
> + - tools/jenkins-runner: Error if both filters and tests are given.
> + - vmtests: prevent tests from modifying cls.collect_scripts
> +
> + -- Chad Smith <chad.smith@xxxxxxxxxxxxx> Tue, 02 Oct 2018 16:07:51 -0600
> +
> +curtin (18.1-52-g5f0082d1-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - Enable custom storage configuration for centos images
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Fri, 21 Sep 2018 03:04:42 -0500
> +
> +curtin (18.1-51-gb812ae80-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: ensure we collect /var/log/journal only once
> +
> + -- Chad Smith <chad.smith@xxxxxxxxxxxxx> Tue, 21 Aug 2018 11:44:46 -0600
> +
> +curtin (18.1-50-g2d9b2c6f-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - clear-holders: handle missing zpool/zfs tools when wiping
> + - clear-holders: rescan for lvm devices after assembling raid arrays
> + - vmtest: enable persistent journal and collect at boot time
> + - Add timing and logging functions.
> + - parse_dpkg_version: support non-numeric in version string.
> + - Don't allow reads of /proc and modprobe zfs through
> +
> + -- Chad Smith <chad.smith@xxxxxxxxxxxxx> Mon, 20 Aug 2018 09:22:06 -0600
> +
> +curtin (18.1-44-g2b12b8fc-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - Add main so that 'python3 -m curtin' does the right thing.
> + - Add subcommand 'features'.
> + - block: use uuid4 (random) when autogenerating UUIDS for filesystems
> + - vmtests: Increase size of root filesystems.
> + - clear-holders: reread ptable after wiping disks with partitions
> + - vmtest: Skip proposed pocket on dev release when 'proposed' in ADD_REPOS.
> + - tests: remove Ubuntu Artful [Joshua Powers]
> + - vmtests: Let a raised SkipTest go through skip_by_date.
> + - vmtests: Increase root fs to give upgrades to -proposed more space.
> + - vmtest: Order the vmtest_pollinate late_command earlier.
> + - vmtest: always add 'curtin/vmtest' to installed pollinate user_agent.
> + - vmtests: make skip_by_date a decorator that runs and reports.
> + - vmtests: always declare certain attributes and remove redundant tests.
> + - vmtests: Add Cosmic release to tests [Joshua Powers]
> + - vmtests: skip TrustyTestMdadmBcache until 2019-01-22.
> + - tox: use simplestreams from git repository rather than bzr.
> + - document that you can set ptable on raids [Michael Hudson-Doyle]
> + - vmtests: move skip-by date of xfs root and xfs boot out 1 year.
> + - vmtests: network_mtu move fixby date out 4 months from last value
> +
> + -- Chad Smith <chad.smith@xxxxxxxxxxxxx> Fri, 10 Aug 2018 09:22:12 -0600
> +
> +curtin (18.1-25-g9d0e557e-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - Fix WorkingDir class to support already existing target directory.
> + (LP: #1775622)
> + - Fix extraction of local filesystem image. (LP: #1775630)
> + - Fix tip-pyflakes imported but unused call to util.get_platform_arch
> + - subp: update return value of subp with combine_capture=True.
> + - tox: add a xenial environments, default envlist changes.
> + - tests: Fix race on utcnow during timestamped curtin-log dir creation
> + (LP: #1772481)
> + - curtainer: patch source version from --source.
> + - pyflakes: fix unused variable references identified by pyflakes 2.0.0.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 07 Jun 2018 14:59:20 -0400
> +
> +curtin (18.1-17-gae48e86f-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - tests: replace usage of mock.assert_called
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 18 May 2018 14:58:06 -0400
> +
> +curtin (18.1-16-g18835845-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - tools: jenkins-runner show curtin version in output.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 18 May 2018 10:29:17 -0400
> +
> +curtin (18.1-15-g5313b9e2-0ubuntu1) cosmic; urgency=medium
> +
> + * New upstream snapshot.
> + - zfs: implement a supported check to handle i386 (LP: #1768709)
> + - Support mount entries not tied to a device, including bind and tmpfs.
> + (LP: #1767979)
> + - block/clear_holders/mdadm: refactor handling of layered device wiping
> + (LP: #1768893, #1769742)
> + - clear_holders: only export zpools that have been imported (LP: #1770280)
> + - vmtests: allow env control of apt, system_upgrade, package upgrade
> + - util.get_efibootmgr: filter bootorder by found entries (LP: #1767584)
> + - vmtests: adjust lvm_iscsi dnames to match configuration
> + - vmtest: always boot with BOOTIF and ip=:::::BOOTIF:dhcp
> + - make_dname for bcache should use backing device uuid
> + - zfsroot: add additional checks, do not require disk 'serial' attribute
> + (LP: #1760879, #1760880)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 18 May 2018 10:19:45 -0400
> +
> +curtin (18.1-5-g572ae5d6-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - clear-holders: fix lvm name use when shutting down (LP: #1764602)
> + - install: prevent unmount: disabled from swallowing installation failures
> + (LP: #1764210)
> + - vmtest: bionic images no longer use the vlan package
> + - pycodestyle: Fix invalid escape sequences in string literals.
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Wed, 18 Apr 2018 10:15:46 -0500
> +
> +curtin (18.1-1-g45564eef-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - Drop ubuntu branch management script new-upstream-snapshot.
> + - Release 18.1
> + - zfs/zpool version=28 by default, allow users to override default values.
> + (LP: #1754013)
> +
> + -- Chad Smith <chad.smith@xxxxxxxxxxxxx> Wed, 28 Mar 2018 14:22:58 -0600
> +
> +curtin (17.1-51-gbd40234f-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - helpers/shell-archive: drop use of tar --sparse flag (LP: #1757565)
> + - vmtest: In Basic install, add entry for swap to fstab and verify its use.
> + - vmtest: skip some bcache tests pending kernel fixes
> + - vmtests: extend skip_by_date for lvmroot_xfsroot and network_mtu
> + - vmtest: fix pollinate re.search to use groupdict()
> + - Add pollinate user-agent configuration support.
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Fri, 23 Mar 2018 10:51:50 -0500
> +
> +curtin (17.1-45-g1a5fe18a-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: Remove xenial and trusty specific workaround for rooturl.
> + - vmtest: Add Filesystem Battery test.
> + - Remove grub2/xenial specific workarounds for zfsroot.
> + - Disable dirty_disks mode for mdadm + iscsi tests
> + - tools/curtainer: Try harder to get source at binary version.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 07 Mar 2018 12:20:40 -0500
> +
> +curtin (17.1-40-g46f8000f-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - clear_holders: wipe complex devices before disassembly (LP: #1750519)
> + - vmtests: network_mtu: fix bug number and move date out one month
> + - fix /usr/bin/curtin exit code in install failure (LP: #1751176)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 07 Mar 2018 02:55:23 -0500
> +
> +curtin (17.1-37-g82622f12-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - docs: Document use of format command with fstype: zfsroot
> + - docs: Add HACKING.rst doc to top level dir and readthedocs.
> + - vmtest: fix centos root-tgz image sync
> + - block_meta: Ensure offset input to sgdisk are integers.
> + - Fix error in url_helper and vmtest from previous commit.
> + - tools: fix curtainer to specify source version to apt-get source.
> + - Add support for installing sources that are a filesystem image.
> + (LP: #1746348)
> + - clear-holders: detect and remove devices from kernel swap as needed.
> + (LP: #1743643)
> + - tests: remove xfs filesystem from basic uefi test.
> + - tools: fix curtainer --source with trusty.
> + - apply_net: do not write to stderr directly.
> + - vmtest: Drop use of root-image.gz and maas2roottar.
> + - in-target: use ChrootableTarget so that unshare pid is used.
> + - tools/curtainer: check that binary and source version are the same.
> + (LP: #1747077)
> + - Add zfsroot as a filesystem type
> + - fix modeline for shell syntax files.
> + - error logs: Create error_tarfile path if path does not exist
> + [Chad Smith] (LP: #1746363)
> + - zfs: only load zfs on xenial+ skip artful/bionic zfs env export
> + - error logs: automatically collect and tar curtin logs upon error.
> + [Chad Smith]
> + - vmtests: Support skipping skip_by_date tests based on environment.
> + - Add zpool, zfs storage commands for experimental support of ZFS on root.
> + - tests: revert workaround for bug in overlayroot that is now fixed.
> + - tests: Bump skip_by_dates for bug 1652822 and 1671952.
> + - cli: add curtin collect-logs sub-command [Chad Smith]
> + - vmtest: Do not run tests of unsupported Ubuntu releases.
> + - Make license headers and file footers consistent and simplify.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 21 Feb 2018 12:19:07 -0500
> +
> +curtin (17.1-11-ga4c9636b-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - tests: cleanup the apt custom sources test.
> + - apt: Be more lenient when replacing mirrors in /etc/apt/sources.list
> + (LP: #1744038)
> + - vmtest: Drop Zesty release
> + - vmtest: initialize logger with class names for easy parsing
> + - packaging: Do not mention primary contributors in debian/changelog.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 18 Jan 2018 16:31:27 -0500
> +
> +curtin (17.1-6-g8b145067-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - packaging: Update new-upstream-snapshot to work with git.
> + - Bump pylint to 1.8.1.
> + - vmtests: switch to MAAS v3 streams for images and kernels [Ryan Harper]
> + - tests: update pack tests to clear out pyc files more completely.
> + - debian/control: drop conflicts that had bzr version
> + - Switch uses of bzr to git, borrow from cloud-init git workflow.
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Tue, 16 Jan 2018 15:42:36 -0600
> +
> +curtin (17.1-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream release (17.1).
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 15 Dec 2017 16:53:09 -0500
> +
> +curtin (17.0~bzr552-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - packaging: update debian/build-deb to remove ~bzrREV when using equal tag
> + - pack: fix packing when curtin is installed inside a snap.
> + - tox: move to pylint 1.7.4
> + - vmtests: iscsi minor cleanup.
> + - vmtests: exercise rootfs over an lvm logical volume
> + - Switch network dep filter to test for ifupdown/nplan instead of release
> + name
> + - Allow control of curtin install unmounting
> + - vmtests: Add Bionic release to tests and update classes.
> + - storage: add 'options' key mount type to specify mount parameters for
> + filesystems (LP: #1709284)
> + - Re-add curthooks.write_files method for backwards compat (LP: #1731709)
> + - vmtest: Remove ArtfulTestBridging skip_by_date check, bug fixed
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Fri, 08 Dec 2017 14:48:42 -0600
> +
> +curtin (0.1.0~bzr541-0ubuntu1) bionic; urgency=medium
> +
> + * New upstream snapshot.
> + - Drop Precise from vmtest
> + - clear_holders: bcache log IO/OS exceptions but do not raise
> + - vmtest: Support newer qemu and multipath.
> + - block: enable control over exclusive_open use when wiping volumes
> + - block: handle wiping bcache parts (LP: #1718699)
> + - vmtests: Defer ArtfulNetworkMtu SkipbyDate to 2018
> + - bcache: accept sysfs write failure in shutdown handler if path missing
> + (LP: #1700564)
> + - vmtest: Rephrase a message about no disks to be less scary
> + - block_meta: use block.wipe_volume(mode=superblock) to clear MBR/GPT tables
> + (LP: #1722322)
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Tue, 07 Nov 2017 11:13:00 -0600
> +
> +curtin (0.1.0~bzr532-0ubuntu1) artful; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: fix artful networking (LP: #1714028, LP: #1718216, LP: #1706744)
> + - docs: Trivial doc fix for enabling proposed.
> + - setup.py: fix to allow installation into a virtualenv (LP: #1703755)
> + - doc: update documentation on curtin-hooks and non-ubuntu installation.
> + - reporter: Add journald reporter to send events to journald
> + - vmtests: add option to tar disk images after test run
> + - install: ensure iscsi service is running to handle shutdown properly
> + - mdadm: handle write failures to sysfs entries when stopping mdadm
> + (LP: #1708052)
> + - vmtest: catch exceptions in curtin-log-print
> + - iscsi: use curtin storage config to disconnect iscsi targets
> + (LP: #1713537)
> + - vmtests: bump skip_by_date values out to give cloud-init SRU more time
> + - vmtest: get info about collected symlinks and then delete them.
> + - Update network cloud-init related skiptest dates, SRU still pending
> +
> + -- Ryan Harper <ryan.harper@xxxxxxxxxxxxx> Thu, 05 Oct 2017 19:15:28 -0500
> +
> +curtin (0.1.0~bzr519-0ubuntu1) artful; urgency=medium
> +
> + * New upstream snapshot.
> + - tests: Add CiTestCase common parent for all curtin tests.
> + - vmtests: Remove force flag for centos curthooks
> + - tools/jenkins-runner: improve tgtd cleanup logic
> + - tests: Drop EOL Wily Vivid and Yakkety tests.
> + - Disable yum plugins when installing packages, update ca-certs for https
> + - Rename centos_network_curthooks -> centos_apply_network_config.
> + - tests: in centos_defaults use write_files for grub serial.
> + - write_files: write files after extract, change write_files signature.
> + - pass network configuration through to target for ubuntu and centos
> + - tests: disable yakkety tests.
> + - tools/launch: automatically pass on proxy settings to curtin
> + - Add top level 'proxy' to config, deprecate top level http_proxy.
> + - tools/curtainer: fix to enable deb-src for -proposed.
> + - Use unshare to put chroot commands in own pid namespace.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 03 Aug 2017 15:51:19 -0400
> +
> +curtin (0.1.0~bzr505-0ubuntu1) artful; urgency=medium
> +
> + * debian/new-upstream-snapshot: fix issue with whitespace at end of line.
> + * New upstream snapshot.
> + - vmtest: let the socket level select a port rather than us picking one.
> + - Fix deb build by mocking call to udevadm settle
> + - Clear and re-order UEFI boot methods during UEFI grub installation.
> + - Resolve bcache race-conditions
> + - tests: clean up usage of collect files
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Mon, 12 Jun 2017 15:45:33 -0400
> +
> +curtin (0.1.0~bzr500-0ubuntu1) artful; urgency=medium
> +
> + * New upstream snapshot.
> + - Allow re-use of vmtest output
> + - Fix stacked storage configurations with iSCSI (LP: #1683910)
> + - vmtests: enable tests to apply storage config to validate clear_holders path
> + - mdadm_stop: Add retry and additional steps to halt a resync
> + - vmtests: Add Artful release and update classes
> + - clear-holders: mdadm use /proc/mdstat to wait for array to stop (LP: #1682584)
> + - uc16 curthooks: add 'network' key to config file (LP: #1685000)
> + - Doc and makefile updates for build and test on new systems.
> + - clear-holders: make bcache handler wait for device shutdown (LP: #1680409)
> + - vmtest: Use utf-8 and fix pseudo test collect_output
> + - vmtest: fix path to install log, and utilize the globally copied paths.
> + - Copy curtin install log into target. (LP: #1684128)
> + - vmtest: add in post-test log post-processing
> + - vmtest: update source.list test
> + - add recursive flag to do_umount, add --umount to block-meta
> + - load_command_environment: fix strict flag, and unit tests.
> + - block_meta: Attempt to mount by UUID= if possible (LP: #1676991)
> + - Make systems with root on bcache use root=UUID=. (LP: #1680591)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 19 May 2017 16:57:07 -0400
> +
> +curtin (0.1.0~bzr482-0ubuntu1) zesty; urgency=medium
> +
> + * New upstream snapshot.
> + - Fix iscsi disks that have a ':' in the target name. (LP: #1679222)
> + - tests: re-enable ZestyTestMdadmBcache.
> + - curthooks: fix pylint reported error when using ubuntu_core_curthooks.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 05 Apr 2017 15:22:25 -0400
> +
> +curtin (0.1.0~bzr479-0ubuntu1) zesty; urgency=medium
> +
> + * New upstream snapshot.
> + - Add support for installing Ubuntu-Core 16 images.
> + - Add 'STORAGE_CONFIG_V1_DD' to the feature list.
> + - flake8: fix flake8 issues with previous merge.
> + - Support selection of target disk for dd images install via
> + storage config. (LP: #1640301)
> + - vmtest: have vmtest-sync-images avoid running when jenkins-runner is.
> + - tools/curtin-from-container: do not use lxc file push --create-dirs
> + - tests: enable curtainer to pull down curtin source locally
> + - tests: make nose output always include class name and method.
> + - tools/curtin-from-container: default to verbosity level 0, not 2.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 23 Mar 2017 13:06:43 -0400
> +
> +curtin (0.1.0~bzr470-0ubuntu1) zesty; urgency=medium
> +
> + * New upstream snapshot.
> + - vmtest: allow time-based skipping of tests, apply to ZestyMdadmBcache
> + (LP: #1667078)
> + - Add iSCSI disk support. (LP: #1645515)
> + - vmtest: handle change in btrfs-progs when finding fs UUID. (LP: #1665701)
> + - pycodestyle: fix bare except in vmtests
> + - unittests: add subp coverage for retries, and rcs
> + - reporting: Add better descriptions and granularity of events
> + - tox: do not bother with pep8 from trusty in trusty-check
> + - tests: add two scripts used for running vmtest with installed package.
> + - Make add-apt-repository command retry
> + - Add tests for network bridging configuration
> + - debian/rules: remove debug 'find'
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 28 Feb 2017 10:30:43 -0500
> +
> +curtin (0.1.0~bzr460-0ubuntu1) zesty; urgency=medium
> +
> + * New upstream snapshot.
> + - Install zipl in target on s390x arch. (LP: #1662346)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 08 Feb 2017 17:09:34 -0500
> +
> +curtin (0.1.0~bzr459-0ubuntu1) zesty; urgency=medium
> +
> + * New upstream snapshot.
> + - Remove style checking during build and add latest style checks to tox
> + - avoid UnicodeDecode error on passing non-utf8 into shlex
> + - adjustments to version string handling, improved pack unit tests.
> + - helpers/common: Add grub install debugging output
> + - curtin: add version module and display in output and logs
> + - content decoding in load_file, apply_net raise exception on errors
> + - gpg: retry when recv'ing gpg keys fail (LP: #1661337)
> + - Add clear_holders checks to disk and partition handlers (LP: #1659509)
> + - net: add new lines after rendered static routes. (LP: #1649652)
> + - multipath: don't run update-grub; setup_grub will handle this better.
> + (LP: #1656369)
> + - test related changes:
> + - vmtest: Add tests for zesty and Trusty HWE-X kernels.
> + - tests: fix tox tip-pycodestyle complaints
> + - image-sync: add debugging output to help diagnose errors
> + - vmtest: change get_curtin_version to use version subcommand.
> + - subp doc an unit test improvements.
> + - vmtest: Add the ability to add extra config files to test execution.
> + - vmtest: overhaul image sync
> + - vmtest: skip apt-proxy test if not set
> + - vmtest: add 'webserv' helper
> + - vmtest: add CURTIN_VMTEST_CURTIN_EXE variable.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 08 Feb 2017 15:29:57 -0500
> +
> +curtin (0.1.0~bzr435-0ubuntu1) zesty; urgency=medium
> +
> + * New upstream snapshot.
> + - pep8: fix pep8 errors found with 'make pep8' on zesty.
> + - Workaround failures caused by gpg2 daemons left running in chroot.
> + (LP: #1645680)
> + - Install u-boot-tools when running on a system with u-boot.
> + (LP: #1640519)
> + - block: fix partition kname for raid devices (LP: #1641661)
> + - Fix up tox errors that slipped in and new pycodestyle 2.1.0 complaints.
> + - vmtests: adjust vmtest image sync metadata filenames
> + - vmtests: Add centos support
> + - Disable WilyTestRaid5Bcache vmtest
> + - tools/xkvm: fix --netdev=<bridge>
> + - bytes2human: fix for values larger than 32 bit int on 32 bit python2.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 01 Dec 2016 21:05:30 -0500
> +
> +curtin (0.1.0~bzr425-0ubuntu1) yakkety; urgency=medium
> +
> + [ Scott Moser ]
> + * debian/new-upstream-snapshot: add writing of debian changelog entries.
> +
> + [ Ryan Harper ]
> + * New upstream snapshot.
> + - unittest,tox.ini: catch and fix issue with trusty-level mock of open
> + - block/mdadm: add option to ignore mdadm_assemble errors (LP: #1618429)
> + - curtin/doc: overhaul curtin documentation for readthedocs.org
> + (LP: #1351085)
> + - curtin.util: re-add support for RunInChroot (LP: #1617375)
> + - curtin/net: overhaul of eni rendering to handle mixed ipv4/ipv6 configs
> + - curtin.block: refactor clear_holders logic into block.clear_holders and
> + cli cmd
> + - curtin.apply_net should exit non-zero upon exception. (LP: #1615780)
> + - apt: fix bug in disable_suites if sources.list line is blank.
> + - vmtests: disable Wily in vmtests
> + - Fix the unittests for test_apt_source.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 29 Sep 2016 14:55:29 -0400
> +
> +curtin (0.1.0~bzr415-0ubuntu1) yakkety; urgency=medium
> +
> + * New upstream snapshot.
> + - Add apt configuration features. (LP: #1574113)
> + - mkfs.vfat: add force flag for formating whole disks (LP: #1597923)
> + - block.mkfs: fix sectorsize flag (LP: #1597522)
> + - block_meta: cleanup use of sys_block_path and handle cciss knames
> + (LP: #1562249)
> + - block.get_blockdev_sector_size: handle _lsblock multi result return
> + (LP: #1598310)
> + - util: add target (chroot) support to subp, add target_path helper
> + - block_meta: fallback to parted if blkid does not produce output
> + (LP: #1524031)
> + - commands.block_wipe: correct default wipe mode to 'superblock'
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 05 Aug 2016 16:51:20 -0400
> +
> +curtin (0.1.0~bzr399-0ubuntu1) yakkety; urgency=medium
> +
> + * debian/new-upstream-snapshot: fix for specifying revision.
> + * New upstream snapshot.
> + - curtin/net: fix inet value for subnets, don't add interface attributes
> + to alias (LP: #1588547)
> + - improve net-meta network configuration (LP: #1592149)
> + - reporting: set webhook handler level to DEBUG, no filtering
> + (LP: #1590846)
> + - tests/vmtests: add yakkety, remove vivid
> + - curtin/net: use post-up for interface alias, resolve 120 second time out
> + on Trusty when using interface aliases
> + - vmtest: provide info on images used
> + - fix multipath configuration and add multipath tests (LP: #1551937)
> + - tools/launch and tools/xkvm: whitespace cleanup and bash -x
> + - tools/launch: boot by root=LABEL=cloudimg-rootfs
> + - Initial vmtest power8 support and TestSimple test.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 12 Jul 2016 12:31:34 -0400
> +
> +curtin (0.1.0~bzr389-0ubuntu1) yakkety; urgency=medium
> +
> + * New upstream snapshot.
> + * Detect and remove legacy /etc/network/interfaces.d/eth0.cfg from
> + target (LP: #1582410)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 03 Jun 2016 09:34:17 -0400
> +
> +curtin (0.1.0~bzr387-0ubuntu1) yakkety; urgency=medium
> +
> + * New upstream snapshot.
> + * fix timestamp in reporting events.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 10 May 2016 10:19:20 -0400
> +
> +curtin (0.1.0~bzr385-0ubuntu2) yakkety; urgency=medium
> +
> + * debian/control: add bcache-tools dependency to curtin.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 05 May 2016 16:35:37 -0400
> +
> +curtin (0.1.0~bzr385-0ubuntu1) yakkety; urgency=medium
> +
> + * debian/control: drop python from curtin-common Depends.
> + remove unnecessary Depends on util-linux as it is essential.
> + python3-curtin, python-curtin: drop unnecessary 'curl' from Depends.
> + python3-curtin, python-curtin: list oauthlib and yaml explicitly.
> +
> + * New upstream snapshot.
> + * mdadm: resolve mdadm/bcache and trusty+hwe issues
> + (LP: #1569549, LP: #1514094)
> + * fix support for 4k disks (LP: #1436632, LP: #1564977)
> + * emit source /etc/network/interfaces.d/*.cfg in
> + rendered /etc/network/interfaces
> + * net: introduce 'control' field to network configuration to allow
> + for declaring manual controlled interfaces
> + * disable cloud-init networking as curtin is the source of network config
> + * block: wipe_volume improvements
> + * reporter: enhance reporting events to include levels and
> + improve usefullness of messages
> + * network: add bonding tests and cleanup newline rendering
> + * block: fix partition path issue with nvme devices
> + * fix logic error in kernel installation
> + * block: add debug regarding raid modules being missing on mdadm create
> + * add s390x support to curtin and vmtest
> +
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 05 May 2016 12:43:40 -0400
> +
> +curtin (0.1.0~bzr365-0ubuntu1) xenial; urgency=medium
> +
> + * New upstream snapshot.
> + * mkfs: handle fstype: vfat (LP: #1557334)
> + * save the curtin install config to /root/curtin-install-cfg.yaml
> + * deps: when 'curtin --install-deps' is run, it will now invoke
> + apt-get install with '--no-install-recommends'
> + * debian/control: adjust build dependency as python3-pyflakes in xenial
> + now provides python3 modules for pyflakes.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 18 Mar 2016 10:18:21 -0400
> +
> +curtin (0.1.0~bzr359-0ubuntu1) xenial; urgency=medium
> +
> + * debian/new-upstream-snapshot, debian/README.source: add
> + new-upstream-snapshot and mention it in README.source
> + * New upstream snapshot.
> + * curtin/net: Add bond parsing & improved source, source-directory
> + parsing for ENI
> + * curtin/net: move global dns-* options under auto lo in ENI (LP: #1543263)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 26 Feb 2016 16:28:31 -0500
> +
> +curtin (0.1.0~bzr351-0ubuntu1) xenial; urgency=medium
> +
> + * New upstream snapshot.
> + * partitioning: limited support for odd ordering of partition
> + numbers (LP: #1543263). Specifically targetted at MAAS and
> + powerVM support.
> + * many upstream test improvements (LP: #1533770)
> + * general upstream code improvements
> + * use mkfs.vfat rather than mkfs.fat to support precise.
> + * use removable devices for installation if no non-removable devices are
> + found [Robert Clark] (LP: #1532062)
> + * mkfs: fix for lack of uuid in btrfs tools on precise or trusty
> + * added 'curtin mkfs' command for easily making filesystems.
> + * mdadm: fix issues exposed by use via block_meta (LP: #1531520)
> + * improvements and small bug fix for oauth on systems with bad clock
> + * support bcache installation on precise
> + * fix bug in install_grub to partition when storage_config
> + provided. (LP: #1523779)
> + * url_helper: raise import error on lack of oauth only when oauth used
> + * block_meta: handle 'preserve' flag for raid devices (LP: #1522147)
> + * close file descriptors from --config= arguments
> + * xenial: disable update-motd during an apt-get update (LP: #1527710)
> + * curthooks: know kernel mapping for xenial (4.4.0)
> + * fix python executable selection when 'curtin --help' is called
> + * subp: add decode parameter, defaulting to replace (LP: #1526127)
> + * support passing an integer or valid float to human2bytes
> + * Use /proc/mounts to find missing mountpoints
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 12 Feb 2016 17:07:33 -0500
> +
> +curtin (0.1.0~bzr314-0ubuntu1) xenial; urgency=medium
> +
> + * New upstream snapshot.
> + * support installing .tar.xz, .tar.gz, .tar.bz2 or .tar via smtar helper
> + * improve dependency checking (LP: #1514888)
> + * Allow re-use of bcache cache devices with separate backing devices
> + (LP: #1514094)
> + * call mkfs.ext3 or mkfs.ext4 with -F (force)
> + * Partition alignment and sizing fixes (LP: #1513085)
> + * Set bcache cache_mode if present in storage config (LP: #1510334)
> + * apt-get update: do not download translation files and source files
> + during installation.
> + * new sub-commands 'system-upgrade' and 'system-install' for package
> + upgrade and installation.
> + * debian/control: do not list unversioned e2fsprogs as it is essential.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Mon, 23 Nov 2015 11:28:52 -0500
> +
> +curtin (0.1.0~bzr276-0ubuntu1) wily; urgency=medium
> +
> + * New upstream snapshot.
> + * debian/control: add python3-curtin depends to curtin (LP: #1503507)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 07 Oct 2015 09:50:34 -0400
> +
> +curtin (0.1.0~bzr275-0ubuntu1) wily; urgency=medium
> +
> + * debian/README.source: tweak to doc on how to generate snapshot
> + * New upstream snapshot.
> + * add advanced storage layout
> + * add advanced networking configuration
> + * add 'vmtest' framework for automated test.
> + * add 'tox' for unit testing
> + * add reporting framework for reporting status events to MAAS or other
> + webhook listener.
> + * enable configuring of verbosity and stacktrace info in config as opposed
> + to command line only
> + * faster swap creation using fallocate (LP: #1482994)
> + * support specifying kernel without 'mapping' in config
> + * add 'system-upgrade' command and config for enabling upgrading the target
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 02 Oct 2015 16:19:07 -0400
> +
> +curtin (0.1.0~bzr227-0ubuntu1) wily; urgency=medium
> +
> + * New upstream snapshot.
> + * support '---' or '--' as token to indicate the subsequent kernel command
> + line parameters should be copied from install envionrment to installed
> + environment. (LP: #1402042)
> + * partition: when partitioning mbr and boot partition verify that
> + both partitions exist.
> + * partition: when creating mbr table, leave space for secondary gpt header
> + * fix uefi install path on nvme devices (LP: #1471928)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 09 Jul 2015 16:17:20 -0400
> +
> +curtin (0.1.0~bzr221-0ubuntu1) wily; urgency=medium
> +
> + * debian/README.source: minor fixes in doc on merging upstream
> + * New upstream snapshot.
> + * force re-reading of partition information before looking
> + for multipath UUID matches.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 24 Jun 2015 14:08:55 -0400
> +
> +curtin (0.1.0~bzr220-0ubuntu1) wily; urgency=medium
> +
> + * New upstream snapshot.
> + * more multipath work. hopefully reliable multipath boot on ppc64 now.
> + * some cleanups to partitioning code.
> + * know expected kernel mapping for wily (4.2)
> + * support UEFI-based ARM64 systems (LP: #1447834)
> + * catch one more usage of lsblk (LP: #1386275)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 18 Jun 2015 14:19:55 -0400
> +
> +curtin (0.1.0~bzr215-0ubuntu1) wily; urgency=medium
> +
> + * New upstream snapshot.
> + * multipath: Generate /etc/multipath/bindings file during installation.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 16 Jun 2015 15:39:29 -0400
> +
> +curtin (0.1.0~bzr214-0ubuntu1) wily; urgency=medium
> +
> + * New upstream snapshot.
> + * Use filesystem uuid rather than scsi_id to avoid false positives
> + when detecting multipath (LP: #1463043).
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 09 Jun 2015 16:35:21 -0400
> +
> +curtin (0.1.0~bzr213-0ubuntu1) wily; urgency=medium
> +
> + * New upstream snapshot.
> + * retry apt-get update to avoid transient failures (LP: #1403133)
> + * detect and handle multipath devices (LP: #1371634)
> + * udevadm settle before unmounting target's /dev (LP: #1462139)
> + * doc/ improved developer doc and tools using maas images for test
> + * use --no-nvram option to grub-install if available (LP: #1311827)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 05 Jun 2015 15:06:31 -0400
> +
> +curtin (0.1.0~bzr205-0ubuntu1) wily; urgency=medium
> +
> + * New upstream snapshot.
> + * improve finding devices and partitions to account for
> + non-standard names (LP: #1401190, LP: #1263181)
> + * do not consider removable devices or devices < 1G as installable
> + * add internal function wipe_partition and use that rather than
> + wipefs for wiping filesystem header data on a partition.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 15 May 2015 16:52:07 -0400
> +
> +curtin (0.1.0~bzr201-0ubuntu1) vivid; urgency=medium
> +
> + * New upstream snapshot.
> + * curtin.deps.install: actually install, rather than --dry-run.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 20 Mar 2015 16:30:11 -0400
> +
> +curtin (0.1.0~bzr200-0ubuntu1) vivid; urgency=medium
> +
> + * New upstream snapshot.
> + * support installation of vivid on vivid via python3 (LP: #1427950)
> + * know kernel mapping for vivid (3.19)
> + * debian/control: update standards versions, wrap-and-sort
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 11 Mar 2015 13:19:43 -0400
> +
> +curtin (0.1.0~bzr196-0ubuntu1) vivid; urgency=medium
> +
> + * New upstream snapshot.
> + * fix bug installing to UEFI systems (LP: #1383727)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Mon, 08 Dec 2014 20:01:44 -0500
> +
> +curtin (0.1.0~bzr195-0ubuntu1) vivid; urgency=medium
> +
> + * New upstream snapshot.
> + * move install log from /var/log/curtin_install.log to
> + /var/log/curtin/install.log (LP: #1378910)
> + * to not use '--acl' when extracting tar files (LP: #1382632)
> + as it inadvertently writes default directory acls.
> + * invoke lsblk with '--output' rather than '--out' to avoid
> + ambiguity in newer versions of lsblk (LP: #1386275)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Mon, 27 Oct 2014 12:25:27 -0400
> +
> +curtin (0.1.0~bzr190-0ubuntu1) utopic; urgency=medium
> +
> + * New upstream snapshot.
> + * add log reporter (LP: #1369129, LP: #1371218)
> + * allow debug messages of helper programs to be seen
> + * fix 'make check'
> + * handle utf-8 output correctly. (LP: #1370249)
> + * set root device correctly on ppc64 (LP: #1371133)
> + * call update-grub to ensure grub.cfg is written (LP: #1373137)
> + * fix dd-tgz mode, only call partprobe on target device.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 26 Sep 2014 17:26:34 -0400
> +
> +curtin (0.1.0~bzr162-0ubuntu1) utopic; urgency=medium
> +
> + * New upstream snapshot.
> + * block-meta: fix '--boot' when used with mbr.
> + * human2bytes: support floating point numbers (.5G or 2G).
> + * sanitize_source: fix detection of url prefixes that specify type
> + * fix reference to variable before use (LP: #1361350)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 04 Sep 2014 17:10:14 -0400
> +
> +curtin (0.1.0~bzr155-0ubuntu1) utopic; urgency=medium
> +
> + * New upstream snapshot.
> + - fix '--maxsize' argument to 'curtin swap' (LP: #1360318) [Jason Hobbs]
> + * d/README.source: add file describing how snapshot releases are made.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 22 Aug 2014 11:54:49 -0400
> +
> +curtin (0.1.0~bzr153-0ubuntu1) utopic; urgency=medium
> +
> + * New upstream snapshot.
> + * support for creating swap file.
> + * fix bug when specifying kernel mapping in config.
> + * install_kernel: run apt-get udpate before searching cache (LP: #1358424)
> + * correctly check for availability of eatmydata (LP: #1358350)
> + * support installation on ppc64 systems (ubuntu ppc64el)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 21 Aug 2014 03:35:53 -0400
> +
> +curtin (0.1.0~bzr143-0ubuntu1) utopic; urgency=medium
> +
> + * New upstream snapshot.
> + * better choose a default boot fstype.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Mon, 04 Aug 2014 04:57:29 -0400
> +
> +curtin (0.1.0~bzr142-0ubuntu1) utopic; urgency=medium
> +
> + * New upstream snapshot.
> + * add utility for parsing /etc/network/interfaces
> + * aarm64 support [Newell Jensen]
> + * run update-initramfs in aarm64
> + * create boot partition when necessary (LP: #1338851 LP: #1340942)
> + * know kernel mapping for utopic (3.16)
> + * properly write fstype into /etc/fstab per provided fstype
> + * add support for disk images as type 'dd-tgz'
> + * correctly call finalize in target (LP: #1328521)
> + * support invoking tar with --xattrs if available (LP: #1307636)
> + * increase size of uefi partition to 512M (LP: #1306164)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 22 Jul 2014 18:53:38 -0400
> +
> +curtin (0.1.0~bzr126-0ubuntu1) trusty; urgency=medium
> +
> + * New upstream snapshot.
> + * create 500M EFI System Partition (ESP) instead of 100M. (LP: #1306164)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 10 Apr 2014 15:11:18 -0400
> +
> +curtin (0.1.0~bzr125-0ubuntu1) trusty; urgency=medium
> +
> + * New upstream snapshot.
> + * fix regression in installation on pc-bios systems (LP: #1303617)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Mon, 07 Apr 2014 10:18:34 -0400
> +
> +curtin (0.1.0~bzr124-0ubuntu1) trusty; urgency=medium
> +
> + * New upstream snapshot.
> + * install correctly on UEFI booted systems (LP: #1300910)
> + [Blake Rouse]
> + * whitespace fixes and other small fixes.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 03 Apr 2014 14:47:01 -0400
> +
> +curtin (0.1.0~bzr121-0ubuntu1) trusty; urgency=medium
> +
> + * New upstream snapshot.
> + * support installing kernel package of booted kernel
> + to enable hardware enablement kernels through maas.
> + * support Calxeda highbank and other ARMv7 systems
> + * fix gpt partitioning. It wouldn't allow grub installation
> + * support for using kexec to boot into the installed system
> + to avoid a hardware bios post.
> + * support declaring target device via config
> + * support installing from a local url (file:///)
> + * fix bug where 'console=' parms were not removed from image's
> + settings (problematic when image was cloud image)
> + * run apt-get update if installing packages
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 26 Mar 2014 17:34:57 -0400
> +
> +curtin (0.1.0~bzr95-0ubuntu2) trusty; urgency=medium
> +
> + * Rebuild to drop files installed into /usr/share/pyshared.
> +
> + -- Matthias Klose <doko@xxxxxxxxxx> Sun, 23 Feb 2014 13:46:42 +0000
> +
> +curtin (0.1.0~bzr95-0ubuntu1) trusty; urgency=low
> +
> + * New upstream snapshot.
> + * fix bug in block-meta resulting in first disk not always being used
> + (LP: #1244026)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 24 Oct 2013 01:41:47 -0400
> +
> +curtin (0.1.0~bzr94-0ubuntu1) saucy-proposed; urgency=low
> +
> + * New upstream snapshot.
> + * fix bug where /usr/sbin/policy-rc.d was not being removed after
> + being utilized during installation to disable daemons. (LP: #1238915)
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 15 Oct 2013 14:45:16 -0400
> +
> +curtin (0.1.0~bzr93-0ubuntu1) saucy; urgency=low
> +
> + * New upstream snapshot.
> + * curtin/commands/in_target.py, curtin/commands/main.py:
> + fix 'curtin -v' and 'curtin in-target' (LP: #1237139)
> + * non-production / development changes:
> + * doc/devel/README.txt: development doc update
> + * tools/build-deb, tools/export-tarball:
> + trunk development changes for creating tarball and building debs.
> + * tools/launch: support '--add' for adding files such as config files
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 08 Oct 2013 20:20:11 -0400
> +
> +curtin (0.1.0~bzr87-0ubuntu1) saucy; urgency=low
> +
> + * New upstream snapshot.
> + * fix bug that prevented some systems from booting because
> + 'dpkg-reconfigure grub-pc' was not being run.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Wed, 25 Sep 2013 16:35:30 -0400
> +
> +curtin (0.1.0~bzr86-0ubuntu1) saucy; urgency=low
> +
> + * New upstream snapshot.
> + * correctly install grub to device rather than partition
> + * correctly write /etc/network/interfaces
> + * get cloud-init configure to work with preseed data.
> + * use tar with --numeric owner when extracting
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Tue, 24 Sep 2013 22:32:08 -0400
> +
> +curtin (0.1.0~bzr85-0ubuntu1) saucy; urgency=low
> +
> + * New upstream snapshot.
> + * fix 'pack_install' usage for maas (LP: #1227944)
> + * debian/rules: fix 'curtin' package to install as python2
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Fri, 20 Sep 2013 16:59:25 -0400
> +
> +curtin (0.1.0~bzr82-0ubuntu1) saucy; urgency=low
> +
> + * New upstream snapshot.
> + * 'net-meta auto' is now default for interfaces.
> + * power_state config can now cause reboot after install.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 19 Sep 2013 17:07:17 -0400
> +
> +curtin (0.1.0~bzr75-0ubuntu1) saucy; urgency=low
> +
> + * New upstream snapshot.
> + * change 'curtin' installer to be python2 for better compatibility
> + * split up packaging. Provide curtin, curtin-common, python-curtin and
> + python3-curtin.
> + * add 'curtin in-target' command for chrooting to target
> + * support http_proxy, apt_proxy, and specifying ubuntu mirrors.
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Thu, 19 Sep 2013 04:07:25 -0400
> +
> +curtin (0.1.0~bzr54-0ubuntu1) saucy; urgency=low
> +
> + * Initial release
> +
> + -- Scott Moser <smoser@xxxxxxxxxx> Mon, 29 Jul 2013 16:12:09 -0400
--
https://code.launchpad.net/~xypron/curtin/+git/curtin/+merge/435991
Your team curtin developers is subscribed to branch curtin:master.
References
