desktop-packages team mailing list archive

[Launchpad Bug Tracker <1342979@xxxxxxxxxxxxxxxxxx>]

This bug was fixed in the package ptouch-driver - 1.3-8ubuntu1

---------------
ptouch-driver (1.3-8ubuntu1) vivid; urgency=medium

  * Fix the "ESC i A" (enable cutter) command patch to correctly send only on
    printers which support it (LP: #1342979).
  * Update the driver to use current CUPS APIs (not the older deprecated ones)
    and fix some compile-time warnings
  * Use the PPD API to get the value of the MediaType flag, which is used to
    pass the "Roll-fed media" flag into the driver
  * Correct the margins for QL-series P-Touch paper-label printers - these
    have a fixed 3mm margin (see the command spec) while the PT-series
    laminated plastic label printers have no appreciable margins.
  * Correct the format of the "ESC i z" (Print Information) command to match
    what is specified in the P-touch 500 raster command spec. Notably set the
    "passed parameter valid" bits, and send valid values for die-cut labels
    and continuous paper rolls.
  * Send the "ESC i d" (Set Margin) command for QL series printers. This is
    required by the command spec. The margin is set to 3mm for continuous
    paper and zero for die-cut (see the command spec)
  * Fix an issue with margins in the driver (disable blank-line padding). This
    was partly responsible for the "excess paper feed" issue.
  * Suppress the spurious "ESC i z" which was sent with incorrect contents at
    the start of the job.
  * Send 350 bytes of NULL/no-op commands at the start of the job. This allows
    the driver to recover the printer into a known state if communication was
    interrupted mid-transfer. This is recommended in the command spec.
  * Remove the "determined by page size" option from "Roll-fed media" as this
    no longer works.
  * Remove the "Advance Media" option, as this allowed users to configure the
    driver to generate print control codes which are illegal per the Brother
    documentation. This is now fixed at "Advance at end of job" (send a Form
    Feed at the end of every page, except the last which has an Eject
    command instead).
  * Merge in the changes formerly provided by send-esc-i-A-for-QL-only.patch.
 -- Philip Pemberton <philpem@xxxxxxxxxxxxx>   Fri, 03 Apr 2015 09:49:33 +0100

** Changed in: ptouch-driver (Ubuntu)
       Status: Confirmed => Fix Released

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to ptouch-driver in Ubuntu.
https://bugs.launchpad.net/bugs/1342979

Title:
  QL-570 don't cut anymore

Status in ptouch-driver package in Ubuntu:
  Fix Released

Bug description:
  I have upgraded my mint 15 to mint 17. After the new installation of
  all equipment, I realized that the Brother QL-570, although still
  printing the labels, but now it does no longer cutting. At first I had
  tried various settings and Ubuntu 14.04 too, but the cut was never
  carried out.

  After hours of attempts I have now found that it is on ptouch-driver;
  with the old version 1.3-4ubuntu1 the cut is working properly, the
  Version 1.3-6 and 1.3-8 does not work (anymore).

  I suspect it has to do with the following change:
  http://anonscm.debian.org/gitweb/?p=printing/ptouch-driver.git;a=commit;h=d70cf3b26bf5d8530579f7146164996c019b783c

  I think, the "ESC i A"-command does not arrive the QL-Printer

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ptouch-driver/+bug/1342979/+subscriptions