desktop-packages team mailing list archive

[Gregor Jasny <gjasny@xxxxxxxxxxxxxx>]

If you use evtest to read the events from the remote control ev device does
it show all key presses?

On Thu, Jun 4, 2015, 00:25 tiago <1461668@xxxxxxxxxxxxxxxxxx> wrote:

> I should also add that I'm using an upstream kernel (3.19.8-992-generic
> #201505300306) due to some issue with the HDMI sound, but with the
> default kernel I had before the remote issue was exactly the same.
>
> --
> You received this bug notification because you are subscribed to v4l-
> utils in Ubuntu.
> https://bugs.launchpad.net/bugs/1461668
>
> Title:
>   ir-keytable presses recognised but not working
>
> Status in v4l-utils package in Ubuntu:
>   New
>
> Bug description:
>   I'm using ir-keytable to map button presses on a remote control to
>   keyboard presses. I'm using an old Apple remote and after scanning for
>   the keycodes I've produced a keymap file which is loaded by ir-
>   keytable. However, I have only succeeded in getting the arrow keys and
>   enter working (KEY_UP,  KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER). All
>   the other keypresses that I've tried are recognised by ir-keytable,
>   but are not being passed to the system. For example, the KEY_BACKSPACE
>   which I need. Running ir-keytable -t and pressing the relevant remote
>   button I get:
>
>   1433359068.641206: event type EV_KEY(0x01) key_down:
> KEY_BACKSPACE(0x0001)
>   1433359068.641206: event type EV_SYN(0x00).
>   1433359068.641230: event type EV_MSC(0x04): scancode = 0x77e1c03d
>   1433359068.641230: event type EV_SYN(0x00).
>   1433359068.641235: event type EV_MSC(0x04): scancode = 0x77e1c03d
>   1433359068.641235: event type EV_SYN(0x00).
>
>   But it never works as backspace. For example, if I open a text editor
>   and use the arrow or enter keys, I can see the cursor moving around.
>   But the backspace does not work. Also any other keymap that I've tried
>   (e.g. numbers, letters) does not work.
>
>   I'm using ir-keytable 1.6.0-2 in xubuntu 15.04.  My system is a
>   NUC5i5RYHK, the IR driver is nuvoton-cir. The output  of ir-keytable
>   is:
>
>   Found /sys/class/rc/rc0/ (/dev/input/event3) with:
>         Driver nuvoton-cir, table rc-rc6-mce
>         Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ
> SHARP XMP other
>         Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC
>         Name: Nuvoton w836x7hg Infrared Remote
>         bus: 25, vendor/product: 1050:00c3, version: 0x0033
>         Repeat delay = 500 ms, repeat period = 125 ms
>
> To manage notifications about this bug go to:
>
> https://bugs.launchpad.net/ubuntu/+source/v4l-utils/+bug/1461668/+subscriptions
>

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to v4l-utils in Ubuntu.
https://bugs.launchpad.net/bugs/1461668

Title:
  ir-keytable presses recognised but not working

Status in v4l-utils package in Ubuntu:
  New

Bug description:
  I'm using ir-keytable to map button presses on a remote control to
  keyboard presses. I'm using an old Apple remote and after scanning for
  the keycodes I've produced a keymap file which is loaded by ir-
  keytable. However, I have only succeeded in getting the arrow keys and
  enter working (KEY_UP,  KEY_DOWN, KEY_LEFT, KEY_RIGHT, KEY_ENTER). All
  the other keypresses that I've tried are recognised by ir-keytable,
  but are not being passed to the system. For example, the KEY_BACKSPACE
  which I need. Running ir-keytable -t and pressing the relevant remote
  button I get:

  1433359068.641206: event type EV_KEY(0x01) key_down: KEY_BACKSPACE(0x0001)
  1433359068.641206: event type EV_SYN(0x00).
  1433359068.641230: event type EV_MSC(0x04): scancode = 0x77e1c03d
  1433359068.641230: event type EV_SYN(0x00).
  1433359068.641235: event type EV_MSC(0x04): scancode = 0x77e1c03d
  1433359068.641235: event type EV_SYN(0x00).

  But it never works as backspace. For example, if I open a text editor
  and use the arrow or enter keys, I can see the cursor moving around.
  But the backspace does not work. Also any other keymap that I've tried
  (e.g. numbers, letters) does not work.

  I'm using ir-keytable 1.6.0-2 in xubuntu 15.04.  My system is a
  NUC5i5RYHK, the IR driver is nuvoton-cir. The output  of ir-keytable
  is:

  Found /sys/class/rc/rc0/ (/dev/input/event3) with:
  	Driver nuvoton-cir, table rc-rc6-mce
  	Supported protocols: NEC RC-5 RC-6 JVC SONY SANYO LIRC RC-5-SZ SHARP XMP other
  	Enabled protocols: NEC RC-5 RC-6 JVC SONY LIRC
  	Name: Nuvoton w836x7hg Infrared Remote
  	bus: 25, vendor/product: 1050:00c3, version: 0x0033
  	Repeat delay = 500 ms, repeat period = 125 ms

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/v4l-utils/+bug/1461668/+subscriptions