← Back to team overview

desktop-packages team mailing list archive

Re: [Bug 1460080] Re: HP laserjet 1018 no longer works

 

Hi Goutam,

I tried sudo hp-plugin, three times, without success. I get the result
you see in the screenshot I am including above.

Apparently it's a problem with the URI of the printer. On checking the properties of the printer I found this:
Device URI: usb//HP/LaserJet%201018?serial=LF04EKT

I tried editing it to:

Device URI: socket://localhost:9100

but it didn't do any good.

Any help you can give me on this would be profoundly appreciated.

Thanks a lot,

Tristram

> Date: Wed, 12 Aug 2015 04:13:37 +0000
> From: goutamkk@xxxxxxxxx
> To: tdshorter@xxxxxxxxxxx
> Subject: [Bug 1460080] Re: HP laserjet 1018 no longer works
> 
> Hi Tristram,
> 
> Run command  'sudo hp-plugin'  in terminal to install the plugin files
> required by this printer.
> 
> Thanks,
> Goutam
> 
> -- 
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1460080
> 
> Title:
>   HP laserjet 1018 no longer works
> 
> Status in HPLIP:
>   Incomplete
> Status in hplip package in Ubuntu:
>   New
> 
> Bug description:
>   My first experience of Ubuntu was Utopic Unicorn, about 2 months ago. I installed HPLIP, so as to use my HP Laserjet 1018 printer, and it all worked fine. On upgrading to Ubuntu 15.04, my printer stopped working. I have tried everything I can think of: upgrading HPLIP, removing HPLIP and installing an alternative driver (foomatic), deleting and adding the printer, nothing works. I have also downloaded and installed all updates to Ubuntu. I have noticed, checking through previous bug reports, that this appears to be a recurring problem: people's HP printers work OK until, on upgrading Ubuntu, they suddenly stopped working. Can it be that beta versions are not being properly tested? Having spent most of yesterday on this problem, and having being seriously ticked off by my boss, about it, I am unwilling to spend further time on it. I was going to include some screens shots to support my case, but I can't see how to do this. Here are some more details:
>   As of now:
>   listed printers are: Canon ip1900 series
>                                      HP Laserjet 1018 (default) / Enabled --> OK / Shared --> OK
>                                                                          Description: Hewlett-Packard HP LaserJet 1018
>                                                                          Location: tristram-Aspire-5570Z
>                                                                          Device URI: usb://HP/LaserJet%201018?serial=LF04EKT
>                                                                          Make and Model: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
>                                                                          Printer state: Idle - Sending data to printer.
> 
>   Trying to print a test page produces a little box that says: "Submitted - Test page submitted as job (whatever)"
>   Noticing that, above, the driver appears to be set to Foomatic, I tried changing it. Now it reads:
>                                                                          Make and Model: HP LaserJet 1018, hpcups 3.15.4, requires proprietary plugin
> 
>   I pressed the "Print Test Page" button, and got:  "Submitted - Test page submitted as job 64". As usual, nothing happens.
>   All this time, the printer is turned on, and connected to my laptop via USB cable, needless to say. On viewing Document print status I have: Job: 64 /User: tristram /Document: Test Page / Printer: Hewlett-Packard-HP-LaserJet-1018 / Size: 1k /Time submitted: 11 minutes ago / Status (printer appears with a red sign) : Stopped - Printer error
>   On viewing job attributes, I have (for instance, a screen shot would be really useful here):
>   job-more-info: http://localhost:631/jobs/64 (...)
>   job-printer-state-message: Filter failed
>   job-printer-state-reasons: ['hplip.plugin-error'] (...)
>   job-state-reasons: job-completed-with-errors  (...)
> 
>   There's more info in this report, but I don't know what you need...
> 
>   I hope this is enough for you people to work on. Meanwhile, I'm
>   seriously thinking of downgrading my Ubuntu version to what it was
>   before, and HPLIP also, except that I don't know for sure what the
>   working version was....
> 
>   Thank you very much,
> 
>   Tristram
> 
>   ProblemType: Bug
>   DistroRelease: Ubuntu 15.04
>   Package: hplip 3.15.2-0ubuntu4.1
>   ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
>   Uname: Linux 3.19.0-18-generic i686
>   ApportVersion: 2.17.2-0ubuntu1.1
>   Architecture: i386
>   CupsErrorLog:
>    E [29/May/2015:09:53:50 -0300] [cups-deviced] PID 12270 (hpfax) stopped with status 1!
>    E [29/May/2015:09:54:39 -0300] [cups-deviced] PID 12722 (hpfax) stopped with status 1!
>    W [29/May/2015:09:55:28 -0300] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id 'Hewlett-Packard-HP-LaserJet-1018-Gray..' already exists
>   CurrentDesktop: Unity
>   Date: Fri May 29 10:00:31 2015
>   InstallationDate: Installed on 2015-01-15 (134 days ago)
>   InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release i386 (20141022.1)
>   Lpstat:
>    device for Canon-iP1900-series: usb://Canon/iP1900%20series?serial=C6EDE8
>    device for Hewlett-Packard-HP-LaserJet-1018: usb://HP/LaserJet%201018?serial=LF04EKT
>   MachineType: Acer, inc. Aspire 5570Z
>   Papersize: letter
>   PccardctlIdent:
>    Socket 0:
>      no product info available
>   PccardctlStatus:
>    Socket 0:
>      no card
>   PpdFiles:
>    Canon-iP1900-series: Canon iP1900 series Ver.3.90
>    Hewlett-Packard-HP-LaserJet-1018: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
>   ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=cb168c94-8297-42bf-9400-5acfcb55fdb2 ro quiet splash vt.handoff=7
>   SourcePackage: hplip
>   UpgradeStatus: Upgraded to vivid on 2015-04-24 (34 days ago)
>   dmi.bios.date: 04/10/07
>   dmi.bios.vendor: Acer
>   dmi.bios.version: v1.3505
>   dmi.board.name: Prespa1
>   dmi.board.vendor: Acer, Inc.
>   dmi.board.version: Not Applicable
>   dmi.chassis.type: 1
>   dmi.chassis.vendor: Acer, Inc.
>   dmi.chassis.version: N/A
>   dmi.modalias: dmi:bvnAcer:bvrv1.3505:bd04/10/07:svnAcer,inc.:pnAspire5570Z:pvrNotApplicable:rvnAcer,Inc.:rnPrespa1:rvrNotApplicable:cvnAcer,Inc.:ct1:cvrN/A:
>   dmi.product.name: Aspire 5570Z
>   dmi.product.version: Not Applicable
>   dmi.sys.vendor: Acer, inc.
> 
> To manage notifications about this bug go to:
> https://bugs.launchpad.net/hplip/+bug/1460080/+subscriptions
 		 	   		  

** Attachment added: "Hp plugin error.png"
   https://bugs.launchpad.net/bugs/1460080/+attachment/4512103/+files/Hp%20plugin%20error.png

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/1460080

Title:
  HP laserjet 1018 no longer works

Status in HPLIP:
  Incomplete
Status in hplip package in Ubuntu:
  New

Bug description:
  My first experience of Ubuntu was Utopic Unicorn, about 2 months ago. I installed HPLIP, so as to use my HP Laserjet 1018 printer, and it all worked fine. On upgrading to Ubuntu 15.04, my printer stopped working. I have tried everything I can think of: upgrading HPLIP, removing HPLIP and installing an alternative driver (foomatic), deleting and adding the printer, nothing works. I have also downloaded and installed all updates to Ubuntu. I have noticed, checking through previous bug reports, that this appears to be a recurring problem: people's HP printers work OK until, on upgrading Ubuntu, they suddenly stopped working. Can it be that beta versions are not being properly tested? Having spent most of yesterday on this problem, and having being seriously ticked off by my boss, about it, I am unwilling to spend further time on it. I was going to include some screens shots to support my case, but I can't see how to do this. Here are some more details:
  As of now:
  listed printers are: Canon ip1900 series
                                     HP Laserjet 1018 (default) / Enabled --> OK / Shared --> OK
                                                                         Description: Hewlett-Packard HP LaserJet 1018
                                                                         Location: tristram-Aspire-5570Z
                                                                         Device URI: usb://HP/LaserJet%201018?serial=LF04EKT
                                                                         Make and Model: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
                                                                         Printer state: Idle - Sending data to printer.

  Trying to print a test page produces a little box that says: "Submitted - Test page submitted as job (whatever)"
  Noticing that, above, the driver appears to be set to Foomatic, I tried changing it. Now it reads:
                                                                         Make and Model: HP LaserJet 1018, hpcups 3.15.4, requires proprietary plugin

  I pressed the "Print Test Page" button, and got:  "Submitted - Test page submitted as job 64". As usual, nothing happens.
  All this time, the printer is turned on, and connected to my laptop via USB cable, needless to say. On viewing Document print status I have: Job: 64 /User: tristram /Document: Test Page / Printer: Hewlett-Packard-HP-LaserJet-1018 / Size: 1k /Time submitted: 11 minutes ago / Status (printer appears with a red sign) : Stopped - Printer error
  On viewing job attributes, I have (for instance, a screen shot would be really useful here):
  job-more-info: http://localhost:631/jobs/64 (...)
  job-printer-state-message: Filter failed
  job-printer-state-reasons: ['hplip.plugin-error'] (...)
  job-state-reasons: job-completed-with-errors  (...)

  There's more info in this report, but I don't know what you need...

  I hope this is enough for you people to work on. Meanwhile, I'm
  seriously thinking of downgrading my Ubuntu version to what it was
  before, and HPLIP also, except that I don't know for sure what the
  working version was....

  Thank you very much,

  Tristram

  ProblemType: Bug
  DistroRelease: Ubuntu 15.04
  Package: hplip 3.15.2-0ubuntu4.1
  ProcVersionSignature: Ubuntu 3.19.0-18.18-generic 3.19.6
  Uname: Linux 3.19.0-18-generic i686
  ApportVersion: 2.17.2-0ubuntu1.1
  Architecture: i386
  CupsErrorLog:
   E [29/May/2015:09:53:50 -0300] [cups-deviced] PID 12270 (hpfax) stopped with status 1!
   E [29/May/2015:09:54:39 -0300] [cups-deviced] PID 12722 (hpfax) stopped with status 1!
   W [29/May/2015:09:55:28 -0300] CreateProfile failed: org.freedesktop.ColorManager.AlreadyExists:profile id 'Hewlett-Packard-HP-LaserJet-1018-Gray..' already exists
  CurrentDesktop: Unity
  Date: Fri May 29 10:00:31 2015
  InstallationDate: Installed on 2015-01-15 (134 days ago)
  InstallationMedia: Ubuntu 14.10 "Utopic Unicorn" - Release i386 (20141022.1)
  Lpstat:
   device for Canon-iP1900-series: usb://Canon/iP1900%20series?serial=C6EDE8
   device for Hewlett-Packard-HP-LaserJet-1018: usb://HP/LaserJet%201018?serial=LF04EKT
  MachineType: Acer, inc. Aspire 5570Z
  Papersize: letter
  PccardctlIdent:
   Socket 0:
     no product info available
  PccardctlStatus:
   Socket 0:
     no card
  PpdFiles:
   Canon-iP1900-series: Canon iP1900 series Ver.3.90
   Hewlett-Packard-HP-LaserJet-1018: HP LaserJet 1018 Foomatic/foo2zjs-z1 (recommended)
  ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-18-generic root=UUID=cb168c94-8297-42bf-9400-5acfcb55fdb2 ro quiet splash vt.handoff=7
  SourcePackage: hplip
  UpgradeStatus: Upgraded to vivid on 2015-04-24 (34 days ago)
  dmi.bios.date: 04/10/07
  dmi.bios.vendor: Acer
  dmi.bios.version: v1.3505
  dmi.board.name: Prespa1
  dmi.board.vendor: Acer, Inc.
  dmi.board.version: Not Applicable
  dmi.chassis.type: 1
  dmi.chassis.vendor: Acer, Inc.
  dmi.chassis.version: N/A
  dmi.modalias: dmi:bvnAcer:bvrv1.3505:bd04/10/07:svnAcer,inc.:pnAspire5570Z:pvrNotApplicable:rvnAcer,Inc.:rnPrespa1:rvrNotApplicable:cvnAcer,Inc.:ct1:cvrN/A:
  dmi.product.name: Aspire 5570Z
  dmi.product.version: Not Applicable
  dmi.sys.vendor: Acer, inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hplip/+bug/1460080/+subscriptions


References