desktop-packages team mailing list archive

[Gannet <329898@xxxxxxxxxxxxxxxxxx>]

Don't know what to say but now I'm discovered following when lj1018 is
connected:

dmesg | grep error
[ 1.816037] usb 2-6: device descriptor read/64, error -71
[ 2.044065] usb 2-6: device descriptor read/64, error -71
[ 2.388045] usb 2-6: device descriptor read/64, error -71
[ 2.616071] usb 2-6: device descriptor read/64, error -71
[ 3.248060] usb 2-6: device not accepting address 5, error -71
[ 3.776018] usb 2-6: device not accepting address 6, error -71
[ 20.036039] usb 7-2: device descriptor read/64, error -110
[ 35.252025] usb 7-2: device descriptor read/64, error -110
[ 50.580043] usb 7-2: device descriptor read/64, error -110
[ 65.796033] usb 7-2: device descriptor read/64, error -110
[ 71.033270] usb 7-2: device descriptor read/8, error -110
[ 76.157437] usb 7-2: device descriptor read/8, error -110
[ 81.393610] usb 7-2: device descriptor read/8, error -110
[ 86.513777] usb 7-2: device descriptor read/8, error -110

Is this hardware issue or not ? I tried different usb-ports with the
same result. Running lsusb gives long thinking. ON/OFF printer helps but
if reconnect it to another port it is also thinking long and not
displaying printer at last.

-- 
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to hplip in Ubuntu.
https://bugs.launchpad.net/bugs/329898

Title:
  The HP 1018 printer not work out of the box if used non-US locale

Status in HP Linux Imaging and Printing:
  Confirmed
Status in Release Notes for Ubuntu:
  Won't Fix
Status in “hplip” package in Ubuntu:
  Fix Released
Status in “ibus” package in Ubuntu:
  Fix Released
Status in “hplip” source package in Lucid:
  Won't Fix
Status in “ibus” source package in Lucid:
  Invalid
Status in “hplip” source package in Maverick:
  Won't Fix
Status in “ibus” source package in Maverick:
  Won't Fix

Bug description:
  This bug is continuation of the bug 217215. To avoid any problems
  related to attempts describe I decided to start with 'clean account'.
  (and created the new bug entry)

  Clean account means:
  1) Remove hplip*, foo2zjs, footomatic package.
  2) Remove any further files related to hp1018
  find /usr/share -name "*1018*"                            
  ./foo2zjs/firmware/sihp1018.img
  ./ppd/hpijs/HP/hp_laserjet_1018-hpijs.ppd
  3) Remove orphaned /usr/share/hplip directory

  After restarting the printer a system message appear pointing that new hardware had been installed and suggesting that hpijs package support the HP 1018 printer. 
  I:
  - installed hpijs with depends
  - Ran Printer configure tool: a driver for HP 1018 hadn't been found 
  - so I chose suggested HP 1015 driver
  - printer didn't react for send packages.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hplip/+bug/329898/+subscriptions