desktop-packages team mailing list archive
-
desktop-packages team
-
Mailing list archive
-
Message #76294
[Bug 1381475] Re: Firewire sound card registered by the name of the fw controller
> which name do you want
> when you plug and unplug the device ?
Based on how other cards are named (see previous attachment "Firewire sound card listed in Sound Settings") there sould be a short description of the output, followed by the short name of the card. For example:
10 Channels *
PHASE 88 **
* Please note that the 10 output channels are, in this case, 8 Analog
and 2 Digital (the same applies to Input channels). As far as I can see,
normally the "8 Channels Analog Output" and the "Digital Output
(S/PDIF)" would be displayed as two separate options in Sound Settings -
I guess this is beyond the scope of the current issue and I shall file a
new bug.
** or PHASE 88 Rack FW
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to pulseaudio in Ubuntu.
https://bugs.launchpad.net/bugs/1381475
Title:
Firewire sound card registered by the name of the fw controller
Status in “pulseaudio” package in Ubuntu:
Incomplete
Bug description:
I am testing the new snd-firewire ALSA module which is currently getting accepted into the kernel.
I have noticed that while ALSA recognizes the correct name for the card, PulseAudio displays another, wrong name, which is apparently the name of the FireWire controller through which the sound card is connected.
$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: FW [PHASE 88 Rack FW], device 0: BeBoB [PHASE 88 Rack FW PCM]
Subdevices: 1/1
Subdevice #0: subdevice #0
$ pacmd list-sinks
Welcome to PulseAudio! Use "help" for usage information.
>>> 4 sink(s) available.
[...]
index: 2
name: <alsa_output.firewire-0x000aac0300592827.10-channels>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9000
volume: 0: 100% 1: 100% 2: 100% 3: 100% 4: 100% 5: 100% 6: 100% 7: 100% 8: 100% 9: 100%
0: 0,00 dB 1: 0,00 dB 2: 0,00 dB 3: 0,00 dB 4: 0,00 dB 5: 0,00 dB 6: 0,00 dB 7: 0,00 dB 8: 0,00 dB 9: 0,00 dB
balance 0,00
base volume: 100%
0,00 dB
volume steps: 65537
muted: no
current latency: 0,00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 5
sample spec: s16le 10ch 44100Hz
channel map: front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right,aux0,aux1
used by: 0
linked by: 0
configured latency: 0,00 ms; range is 0,50 .. 185,76 ms
card: 3 <alsa_card.firewire-0x000aac0300592827>
module: 8
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "PHASE 88 Rack FW PCM"
alsa.id = "BeBoB"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "0"
alsa.card_name = "PHASE 88 Rack FW"
alsa.long_card_name = "TerraTec Electronic Gmb PHASE 88 Rack FW (id:3, rev:1), GUID 000aac0300592827 a"
alsa.driver_name = "snd_bebob"
device.bus_path = "pci-0000:01:09.0"
sysfs.path = "/devices/pci0000:00/0000:00:09.0/0000:01:09.0/fw2/fw2.0/sound/card0"
udev.id = "firewire-0x000aac0300592827"
device.bus = "firewire"
device.vendor.name = "Texas Instruments"
device.product.name = "TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx]"
device.string = "hw:0"
device.buffering.buffer_size = "163840"
device.buffering.fragment_size = "81920"
device.access_mode = "mmap+timer"
device.profile.name = "10-channels"
device.profile.description = "10 Channels"
device.description = "TSB43AB22A IEEE-1394a-2000 Controller (PHY/Link) [iOHCI-Lynx] 10 Channels"
alsa.mixer_name = "PHASE 88 Rack FW"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-firewire"
PulseAudio 1:4.0-0ubuntu11
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/pulseaudio/+bug/1381475/+subscriptions
References