desktop-packages team mailing list archive
-
desktop-packages team
-
Mailing list archive
-
Message #83247
[Bug 223638] Re: no sound on upgrade to Hardy Heron [Inspiron 1420]
Hardy has seen the end of its life and is no longer receiving any
updates. Marking the Hardy task for this ticket as "Won't Fix".
** Changed in: alsa-driver (Ubuntu Hardy)
Status: New => Won't Fix
--
You received this bug notification because you are a member of Desktop
Packages, which is subscribed to alsa-driver in Ubuntu.
https://bugs.launchpad.net/bugs/223638
Title:
no sound on upgrade to Hardy Heron [Inspiron 1420]
Status in “alsa-driver” package in Ubuntu:
Fix Released
Status in “alsa-driver” source package in Hardy:
Won't Fix
Bug description:
Upgraded to Hardy Heron from Gutsy Gibbon via Update Manager on Dell
Inspiron 1420 and lost all sound. Have unmuted all sound in Alsa
mixer, but no help there. When I hit the test buttons, it looks like
sound should be coming out--I get no error message, but no sound
either.
Using Ubuntu release 8.04.
Kernel is 2.6.24-16-generic.
When I ran 'apt-cache policy packagename', I got, "Unable to locate package packagename"
This is the output from 'lspci -vvnn':
00:00.0 Host bridge [0600]: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub [8086:2a00] (rev 0c)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 0c) (prog-if 00 [VGA controller])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at fea00000 (64-bit, non-prefetchable) [size=1M]
Region 2: Memory at e0000000 (64-bit, prefetchable) [size=256M]
Region 4: I/O ports at eff8 [size=8]
Capabilities: <access denied>
00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a03] (rev 0c)
Subsystem: Dell Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Region 0: Memory at feb00000 (64-bit, non-prefetchable) [size=1M]
Capabilities: <access denied>
00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 [8086:2834] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 6f20 [size=32]
00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 [8086:2835] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 6f00 [size=32]
00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 [8086:283a] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 0: Memory at fed1c400 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio Controller [8086:284b] (rev 02)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 20
Region 0: Memory at fe9fc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 [8086:283f] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 [8086:2841] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: fe800000-fe8fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 [8086:2845] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0000d000-0000dfff
Memory behind bridge: fe600000-fe7fffff
Prefetchable memory behind bridge: 00000000f0000000-00000000f01fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1c.5 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express Port 6 [8086:2849] (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=09, subordinate=09, sec-latency=0
Memory behind bridge: fe500000-fe5fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 [8086:2830] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 4: I/O ports at 6f80 [size=32]
00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 [8086:2831] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 20
Region 4: I/O ports at 6f60 [size=32]
00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 [8086:2832] (rev 02) (prog-if 00 [UHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin C routed to IRQ 21
Region 4: I/O ports at 6f40 [size=32]
00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 [8086:2836] (rev 02) (prog-if 20 [EHCI])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 19
Region 0: Memory at fed1c000 (32-bit, non-prefetchable) [size=1K]
Capabilities: <access denied>
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev f2) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: fe400000-fe4fffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
Capabilities: <access denied>
00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller [8086:2815] (rev 02)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Capabilities: <access denied>
00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller [8086:2850] (rev 02) (prog-if 8a [Master SecP PriP])
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at 6fa0 [size=16]
00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller [8086:2829] (rev 02) (prog-if 01 [AHCI 1.0])
Subsystem: Dell Unknown device [1028:01f3]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin B routed to IRQ 219
Region 0: I/O ports at 6eb0 [size=8]
Region 1: I/O ports at 6eb8 [size=4]
Region 2: I/O ports at 6ec0 [size=8]
Region 3: I/O ports at 6ec8 [size=4]
Region 4: I/O ports at 6ee0 [size=32]
Region 5: Memory at fe9fb800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller [8086:283e] (rev 02)
Subsystem: Dell Inspiron 1420 [1028:01f3]
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin B routed to IRQ 10
Region 0: Memory at fe9fb700 (32-bit, non-prefetchable) [size=256]
Region 4: I/O ports at 10c0 [size=32]
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller [1180:0832] (rev 05) (prog-if 10 [OHCI])
Subsystem: Dell Unknown device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (500ns min, 1000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: Memory at fe4ff800 (32-bit, non-prefetchable) [size=2K]
Capabilities: <access denied>
03:01.1 SD Host controller [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22) (prog-if 01)
Subsystem: Dell Unknown device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 22
Region 0: Memory at fe4ff500 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter [1180:0592] (rev 12)
Subsystem: Dell Unknown device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at fe4ff600 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller [1180:0852] (rev 12)
Subsystem: Dell Unknown device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 4
Region 0: Memory at fe4ff700 (32-bit, non-prefetchable) [size=256]
Capabilities: <access denied>
09:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5906M Fast Ethernet PCI Express [14e4:1713] (rev 02)
Subsystem: Dell Unknown device [1028:01f3]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 217
Region 0: Memory at fe5f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at <ignored> [disabled]
Capabilities: <access denied>
0c:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG Network Connection [8086:4222] (rev 02)
Subsystem: Intel Corporation Unknown device [8086:1020]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 218
Region 0: Memory at fe8ff000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <access denied>
Here is output from "dmesg":
[ 7.884624] CPU1: Intel(R) Core(TM)2 Duo CPU T7500 @ 2.20GHz stepping 0b
[ 7.884643] Total of 2 processors activated (8782.92 BogoMIPS).
[ 7.884839] ENABLING IO-APIC IRQs
[ 7.885022] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 8.031914] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 8.051900] Brought up 2 CPUs
[ 8.051920] CPU0 attaching sched-domain:
[ 8.051922] domain 0: span 03
[ 8.051923] groups: 01 02
[ 8.051926] CPU1 attaching sched-domain:
[ 8.051927] domain 0: span 03
[ 8.051928] groups: 02 01
[ 8.052090] net_namespace: 64 bytes
[ 8.052098] Booting paravirtualized kernel on bare hardware
[ 8.052474] Time: 8:03:42 Date: 04/28/08
[ 8.052495] NET: Registered protocol family 16
[ 8.052630] EISA bus registered
[ 8.052634] ACPI: bus type pci registered
[ 8.063239] PCI: PCI BIOS revision 2.10 entry at 0xfad46, last bus=14
[ 8.063240] PCI: Using configuration type 1
[ 8.063241] Setting up standard PCI resources
[ 8.069931] ACPI: EC: Look up EC in DSDT
[ 8.110292] ACPI: Interpreter enabled
[ 8.110295] ACPI: (supports S0 S3 S4 S5)
[ 8.110304] ACPI: Using IOAPIC for interrupt routing
[ 8.127918] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 8.128890] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 8.128894] PCI quirk: region 1080-10bf claimed by ICH6 GPIO
[ 8.130407] PCI: Transparent bridge - 0000:00:1e.0
[ 8.130455] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 8.130811] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIE._PRT]
[ 8.130937] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 8.131033] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 8.131127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 8.131220] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 8.140758] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 8.140851] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 8.140941] ACPI: PCI Interrupt Link [LNKC] (IRQs 9 10 11) *4
[ 8.141032] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 8.141122] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 8.141214] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 8.141306] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 *7 9 10 11 12 14 15)
[ 8.141389] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 8.141499] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 8.141521] pnp: PnP ACPI init
[ 8.141527] ACPI: bus type pnp registered
[ 8.173199] pnpacpi: exceeded the max number of mem resources: 12
[ 8.173358] pnp: PnP ACPI: found 12 devices
[ 8.173360] ACPI: ACPI bus type pnp unregistered
[ 8.173362] PnPBIOS: Disabled by ACPI PNP
[ 8.173513] PCI: Using ACPI for IRQ routing
[ 8.173515] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 8.263614] NET: Registered protocol family 8
[ 8.263616] NET: Registered protocol family 20
[ 8.263640] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 8.263644] hpet0: 3 64-bit timers, 14318180 Hz
[ 8.264668] AppArmor: AppArmor Filesystem Enabled
[ 8.267515] Time: tsc clocksource has been installed.
[ 8.267526] Switched to high resolution mode on CPU 0
[ 8.267606] Switched to high resolution mode on CPU 1
[ 8.280483] system 00:05: ioport range 0xc80-0xcff could not be reserved
[ 8.280489] system 00:08: iomem range 0xfed00000-0xfed003ff has been reserved
[ 8.280493] system 00:09: ioport range 0x900-0x97f has been reserved
[ 8.280495] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 8.280497] system 00:09: ioport range 0x1000-0x1005 has been reserved
[ 8.280499] system 00:09: ioport range 0x1008-0x100f has been reserved
[ 8.280503] system 00:0a: ioport range 0xf400-0xf4fe has been reserved
[ 8.280505] system 00:0a: ioport range 0x1006-0x1007 has been reserved
[ 8.280508] system 00:0a: ioport range 0x100a-0x1059 could not be reserved
[ 8.280510] system 00:0a: ioport range 0x1060-0x107f has been reserved
[ 8.280512] system 00:0a: ioport range 0x1080-0x10bf has been reserved
[ 8.280513] system 00:0a: ioport range 0x10c0-0x10df has been reserved
[ 8.280515] system 00:0a: ioport range 0x1010-0x102f has been reserved
[ 8.280517] system 00:0a: ioport range 0x809-0x809 has been reserved
[ 8.280522] system 00:0b: iomem range 0x0-0x9efff could not be reserved
[ 8.280524] system 00:0b: iomem range 0x9f000-0x9ffff could not be reserved
[ 8.280526] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved
[ 8.280528] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved
[ 8.280530] system 00:0b: iomem range 0x100000-0xdf6923ff could not be reserved
[ 8.280532] system 00:0b: iomem range 0xdf692400-0xdf6fffff could not be reserved
[ 8.280534] system 00:0b: iomem range 0xdf700000-0xdf7fffff could not be reserved
[ 8.280536] system 00:0b: iomem range 0xdf700000-0xdfefffff could not be reserved
[ 8.280539] system 00:0b: iomem range 0xfff00000-0xffffffff could not be reserved
[ 8.280541] system 00:0b: iomem range 0xffa00000-0xffafffff has been reserved
[ 8.280543] system 00:0b: iomem range 0xfec00000-0xfec0ffff could not be reserved
[ 8.280545] system 00:0b: iomem range 0xfee00000-0xfee0ffff could not be reserved
[ 8.310823] PCI: Bridge: 0000:00:1c.0
[ 8.310824] IO window: disabled.
[ 8.310829] MEM window: disabled.
[ 8.310833] PREFETCH window: disabled.
[ 8.310839] PCI: Bridge: 0000:00:1c.1
[ 8.310840] IO window: disabled.
[ 8.310845] MEM window: fe800000-fe8fffff
[ 8.310849] PREFETCH window: disabled.
[ 8.310854] PCI: Bridge: 0000:00:1c.3
[ 8.310857] IO window: d000-dfff
[ 8.310862] MEM window: fe600000-fe7fffff
[ 8.310866] PREFETCH window: f0000000-f01fffff
[ 8.310872] PCI: Bridge: 0000:00:1c.5
[ 8.310873] IO window: disabled.
[ 8.310878] MEM window: fe500000-fe5fffff
[ 8.310882] PREFETCH window: disabled.
[ 8.310888] PCI: Bridge: 0000:00:1e.0
[ 8.310889] IO window: disabled.
[ 8.310894] MEM window: fe400000-fe4fffff
[ 8.310898] PREFETCH window: disabled.
[ 8.310926] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16
[ 8.310932] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.310956] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.310961] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 8.310984] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 18
[ 8.310989] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 8.311012] ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 17
[ 8.311017] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 8.311031] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 8.311040] NET: Registered protocol family 2
[ 8.348412] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 8.348581] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 8.348899] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 8.349054] TCP: Hash tables configured (established 131072 bind 65536)
[ 8.349056] TCP reno registered
[ 8.360448] checking if image is initramfs... it is
[ 8.876628] Freeing initrd memory: 7390k freed
[ 8.876746] Simple Boot Flag at 0x79 set to 0x1
[ 8.877206] audit: initializing netlink socket (disabled)
[ 8.877217] audit(1209369822.320:1): initialized
[ 8.877428] highmem bounce pool size: 64 pages
[ 8.878861] VFS: Disk quotas dquot_6.5.1
[ 8.878920] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 8.879029] io scheduler noop registered
[ 8.879030] io scheduler anticipatory registered
[ 8.879032] io scheduler deadline registered
[ 8.879040] io scheduler cfq registered (default)
[ 8.879049] Boot video device is 0000:00:02.0
[ 8.879254] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 8.879312] assign_interrupt_mode Found MSI capability
[ 8.879360] Allocate Port Service[0000:00:1c.0:pcie00]
[ 8.879384] Allocate Port Service[0000:00:1c.0:pcie02]
[ 8.879475] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 8.879532] assign_interrupt_mode Found MSI capability
[ 8.879578] Allocate Port Service[0000:00:1c.1:pcie00]
[ 8.879600] Allocate Port Service[0000:00:1c.1:pcie02]
[ 8.879690] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 8.879748] assign_interrupt_mode Found MSI capability
[ 8.879793] Allocate Port Service[0000:00:1c.3:pcie00]
[ 8.879815] Allocate Port Service[0000:00:1c.3:pcie02]
[ 8.879906] PCI: Setting latency timer of device 0000:00:1c.5 to 64
[ 8.879963] assign_interrupt_mode Found MSI capability
[ 8.880008] Allocate Port Service[0000:00:1c.5:pcie00]
[ 8.880031] Allocate Port Service[0000:00:1c.5:pcie02]
[ 8.880242] isapnp: Scanning for PnP cards...
[ 9.234102] isapnp: No Plug & Play device found
[ 9.252142] Real Time Clock Driver v1.12ac
[ 9.252254] hpet_resources: 0xfed00000 is busy
[ 9.252300] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 9.253143] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 9.253191] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 9.253259] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 9.256410] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 9.256414] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 9.275473] mice: PS/2 mouse device common for all mice
[ 9.275549] EISA: Probing bus 0 at eisa.0
[ 9.275555] Cannot allocate resource for EISA slot 1
[ 9.275584] EISA: Detected 0 cards.
[ 9.275587] cpuidle: using governor ladder
[ 9.275588] cpuidle: using governor menu
[ 9.275650] NET: Registered protocol family 1
[ 9.275672] Using IPI No-Shortcut mode
[ 9.275695] registered taskstats version 1
[ 9.275796] Magic number: 4:451:69
[ 9.275843] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 9.275845] EDD information not available.
[ 9.276017] Freeing unused kernel memory: 364k freed
[ 9.279026] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1
[ 10.443397] fuse init (API version 7.9)
[ 10.462204] ACPI: SSDT DF6930F2, 0286 (r1 PmRef Cpu0Ist 3000 INTL 20050624)
[ 10.462357] ACPI: SSDT DF692A88, 05E5 (r1 PmRef Cpu0Cst 3001 INTL 20050624)
[ 10.462907] Monitor-Mwait will be used to enter C-1 state
[ 10.462910] Monitor-Mwait will be used to enter C-2 state
[ 10.462912] Monitor-Mwait will be used to enter C-3 state
[ 10.463007] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 10.463010] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 10.463177] ACPI: SSDT DF693378, 00C4 (r1 PmRef Cpu1Ist 3000 INTL 20050624)
[ 10.463317] ACPI: SSDT DF69306D, 0085 (r1 PmRef Cpu1Cst 3000 INTL 20050624)
[ 10.463920] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 10.463924] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 10.469517] ACPI: Thermal Zone [THM] (41 C)
[ 10.569043] usbcore: registered new interface driver usbfs
[ 10.569065] usbcore: registered new interface driver hub
[ 10.569389] usbcore: registered new device driver usb
[ 10.570509] USB Universal Host Controller Interface driver v3.0
[ 10.570550] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 10.570559] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[ 10.570563] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 10.570722] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 10.570754] uhci_hcd 0000:00:1a.0: irq 19, io base 0x00006f20
[ 10.570851] usb usb1: configuration #1 chosen from 1 choice
[ 10.570869] hub 1-0:1.0: USB hub found
[ 10.570872] hub 1-0:1.0: 2 ports detected
[ 10.676377] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 10.676387] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[ 10.676391] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 10.676407] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[ 10.676437] uhci_hcd 0000:00:1a.1: irq 20, io base 0x00006f00
[ 10.676522] usb usb2: configuration #1 chosen from 1 choice
[ 10.676539] hub 2-0:1.0: USB hub found
[ 10.676543] hub 2-0:1.0: 2 ports detected
[ 10.780261] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 21
[ 10.780273] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[ 10.780277] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 10.780294] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 3
[ 10.784195] ehci_hcd 0000:00:1a.7: debug port 1
[ 10.784202] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[ 10.784209] ehci_hcd 0000:00:1a.7: irq 21, io mem 0xfed1c400
[ 10.797144] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.797220] usb usb3: configuration #1 chosen from 1 choice
[ 10.797238] hub 3-0:1.0: USB hub found
[ 10.797242] hub 3-0:1.0: 4 ports detected
[ 10.851155] SCSI subsystem initialized
[ 10.866101] libata version 3.00 loaded.
[ 10.901107] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19
[ 10.901120] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 10.901123] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 10.901141] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4
[ 10.905040] ehci_hcd 0000:00:1d.7: debug port 1
[ 10.905046] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[ 10.905050] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfed1c000
[ 10.917009] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 10.917082] usb usb4: configuration #1 chosen from 1 choice
[ 10.917102] hub 4-0:1.0: USB hub found
[ 10.917106] hub 4-0:1.0: 6 ports detected
[ 11.021023] ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 19 (level, low) -> IRQ 18
[ 11.073700] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[18] MMIO=[fe4ff800-fe4fffff] Max Packet=[2048] IR/IT contexts=[4/4]
[ 11.077708] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19
[ 11.077717] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 11.077721] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 11.077741] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 11.077768] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00006f80
[ 11.077866] usb usb5: configuration #1 chosen from 1 choice
[ 11.077884] hub 5-0:1.0: USB hub found
[ 11.077887] hub 5-0:1.0: 2 ports detected
[ 11.183731] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 21 (level, low) -> IRQ 20
[ 11.183742] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 11.183746] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 11.183763] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 11.183791] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00006f60
[ 11.183876] usb usb6: configuration #1 chosen from 1 choice
[ 11.183893] hub 6-0:1.0: USB hub found
[ 11.183897] hub 6-0:1.0: 2 ports detected
[ 11.283624] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 22 (level, low) -> IRQ 21
[ 11.283635] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 11.283640] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 11.283667] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 11.283696] uhci_hcd 0000:00:1d.2: irq 21, io base 0x00006f40
[ 11.283793] usb usb7: configuration #1 chosen from 1 choice
[ 11.283809] hub 7-0:1.0: USB hub found
[ 11.283813] hub 7-0:1.0: 2 ports detected
[ 11.389715] ahci 0000:00:1f.2: version 3.0
[ 11.389738] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 17 (level, low) -> IRQ 17
[ 11.389783] ahci 0000:00:1f.2: nr_ports (3) and implemented port map (0x5) don't match, using nr_ports
[ 11.389785] ahci 0000:00:1f.2: forcing PORTS_IMPL to 0x7
[ 11.551171] Clocksource tsc unstable (delta = -6125908883 ns)
[ 11.555155] Time: hpet clocksource has been installed.
[ 11.613062] ieee1394: Host added: ID:BUS[0-00:1023] GUID[394fc000329611a1]
[ 11.616374] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[ 11.616380] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part
[ 11.616387] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 11.616656] scsi0 : ahci
[ 11.616784] scsi1 : ahci
[ 11.616904] scsi2 : ahci
[ 11.617109] ata1: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb900 irq 219
[ 11.617113] ata2: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fb980 irq 219
[ 11.617115] ata3: SATA max UDMA/133 abar m2048@0xfe9fb800 port 0xfe9fba00 irq 219
[ 11.648087] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 11.648648] ata1.00: ATA-8: FUJITSU MHW2160BJ G2, 0085001A, max UDMA/100
[ 11.648652] ata1.00: 312581808 sectors, multi 8: LBA48 NCQ (depth 31/32)
[ 11.649353] ata1.00: configured for UDMA/100
[ 11.667860] ata2: SATA link down (SStatus 0 SControl 0)
[ 11.686380] ata3: SATA link down (SStatus 0 SControl 300)
[ 11.686610] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHW2160B 0085 PQ: 0 ANSI: 5
[ 11.686692] tg3.c:v3.86 (November 9, 2007)
[ 11.686735] ACPI: PCI Interrupt 0000:09:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 11.686751] PCI: Setting latency timer of device 0000:09:00.0 to 64
[ 11.692696] Driver 'sd' needs updating - please use bus_type methods
[ 11.696330] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 11.696340] sd 0:0:0:0: [sda] Write Protect is off
[ 11.696342] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.696355] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.696396] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 11.696404] sd 0:0:0:0: [sda] Write Protect is off
[ 11.696405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 11.696417] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 11.696420] sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[ 11.777419] sd 0:0:0:0: [sda] Attached SCSI disk
[ 11.780820] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 11.989004] eth0: Tigon3 [partno(BCM95906) rev c002 PHY(5906)] (PCI Express) 10/100Base-TX Ethernet 00:1c:23:f8:6c:2f
[ 11.989010] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[0] TSOcap[0]
[ 11.989012] eth0: dma_rwctrl[76180000] dma_mask[64-bit]
[ 11.989056] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.989087] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 11.989098] ACPI: PCI interrupt for device 0000:00:1f.1 disabled
[ 11.991532] ata_piix 0000:00:1f.1: version 2.12
[ 11.991542] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 16 (level, low) -> IRQ 16
[ 11.991562] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 11.991633] scsi3 : ata_piix
[ 11.991673] scsi4 : ata_piix
[ 11.992178] ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x6fa0 irq 14
[ 11.992180] ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x6fa8 irq 15
[ 12.038216] Attempting manual resume
[ 12.038218] swsusp: Resume From Partition 8:5
[ 12.038219] PM: Checking swsusp image.
[ 12.038409] PM: Resume from disk failed.
[ 12.152314] kjournald starting. Commit interval 5 seconds
[ 12.152354] EXT3-fs: mounted filesystem with ordered data mode.
[ 12.324933] ata4.00: ATAPI: PBDS DVD+/-RW DS-8W1P, BD1B, max UDMA/33
[ 12.521536] ata4.00: configured for UDMA/33
[ 12.521621] ata5: port disabled. ignoring.
[ 12.523970] scsi 3:0:0:0: CD-ROM PBDS DVD+-RW DS-8W1P BD1B PQ: 0 ANSI: 5
[ 12.524061] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[ 20.204956] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 20.869523] iTCO_vendor_support: vendor-support=0
[ 20.889920] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007)
[ 20.976960] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 21.001351] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 21.065243] Linux agpgart interface v0.102
[ 21.133388] input: PS/2 Mouse as /devices/virtual/input/input3
[ 21.149254] ACPI: AC Adapter [AC] (on-line)
[ 21.186218] agpgart: Detected an Intel 965GM Chipset.
[ 21.187764] agpgart: Detected 7676K stolen memory.
[ 21.199801] agpgart: AGP aperture is 256M @ 0xe0000000
[ 21.201577] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input4
[ 21.227625] input: Lid Switch as /devices/virtual/input/input5
[ 21.263084] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 21.263098] iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
[ 21.263137] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 21.285388] ACPI: Lid Switch [LID]
[ 21.285434] input: Power Button (CM) as /devices/virtual/input/input6
[ 21.344845] ACPI: Power Button (CM) [PBTN]
[ 21.344893] input: Sleep Button (CM) as /devices/virtual/input/input7
[ 21.392756] ACPI: Sleep Button (CM) [SBTN]
[ 21.418341] ACPI: Battery Slot [BAT0] (battery present)
[ 21.418384] ACPI: WMI-Acer: Mapper loaded
[ 21.706170] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/device:2e/LNXVIDEO:00/input/input8
[ 21.728131] sdhci: Secure Digital Host Controller Interface driver
[ 21.728134] sdhci: Copyright(c) Pierre Ossman
[ 21.728161] sdhci: SDHCI controller found at 0000:03:01.1 [1180:0822] (rev 22)
[ 21.728182] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 18 (level, low) -> IRQ 22
[ 21.730217] mmc0: SDHCI at 0xfe4ff500 irq 22 DMA
[ 21.760263] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 21.773225] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:01/input/input9
[ 21.828164] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no)
[ 21.828286] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:02/input/input10
[ 21.856149] Driver 'sr' needs updating - please use bus_type methods
[ 21.888093] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no)
[ 21.918806] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 21.918809] Uniform CD-ROM driver Revision: 3.20
[ 21.918859] sr 3:0:0:0: Attached scsi CD-ROM sr0
[ 22.140045] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 21 (level, low) -> IRQ 20
[ 22.140062] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 22.155702] iwl3945: Intel(R) PRO/Wireless 3945ABG/BG Network Connection driver for Linux, 1.2.0
[ 22.155705] iwl3945: Copyright(c) 2003-2007 Intel Corporation
[ 22.534381] ACPI: PCI Interrupt 0000:0c:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[ 22.534397] PCI: Setting latency timer of device 0000:0c:00.0 to 64
[ 22.534418] iwl3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[ 22.865604] iwl3945: Tunable channels: 11 802.11bg, 13 802.11a channels
[ 22.865893] wmaster0: Selected rate control algorithm 'iwl-3945-rs'
[ 22.969150] lp: driver loaded but no devices found
[ 23.029816] udev: renamed network interface wlan0 to eth1
[ 23.062451] Adding 4506192k swap on /dev/sda5. Priority:-1 extents:1 across:4506192k
[ 23.766875] EXT3 FS on sda6, internal journal
[ 24.025057] kjournald starting. Commit interval 5 seconds
[ 24.025084] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 24.025355] EXT3 FS on sda3, internal journal
[ 24.025360] EXT3-fs: mounted filesystem with ordered data mode.
[ 24.556514] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 28.997003] No dock devices found.
[ 31.800050] mtrr: no more MTRRs available
[ 31.800077] mtrr: no more MTRRs available
[ 31.800107] mtrr: no more MTRRs available
[ 31.800122] mtrr: no more MTRRs available
[ 32.270335] ppdev: user-space parallel port driver
[ 32.707483] audit(1209384257.357:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=6487 profile="/usr/sbin/cupsd" namespace="default"
[ 32.780579] apm: BIOS not found.
[ 35.819966] RPC: Registered udp transport module.
[ 35.819970] RPC: Registered tcp transport module.
[ 36.012150] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
[ 36.116424] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 36.142991] NFSD: starting 90-second grace period
[ 37.260944] Bluetooth: Core ver 2.11
[ 37.261093] NET: Registered protocol family 31
[ 37.261097] Bluetooth: HCI device and connection manager initialized
[ 37.261103] Bluetooth: HCI socket layer initialized
[ 37.355198] Bluetooth: L2CAP ver 2.9
[ 37.355206] Bluetooth: L2CAP socket layer initialized
[ 37.524283] Bluetooth: RFCOMM socket layer initialized
[ 37.524305] Bluetooth: RFCOMM TTY layer initialized
[ 37.524308] Bluetooth: RFCOMM ver 1.8
[ 42.556809] NET: Registered protocol family 10
[ 42.557306] lo: Disabled Privacy Extensions
[ 42.558330] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 42.559325] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 48.349132] CPU0 attaching NULL sched-domain.
[ 48.349143] CPU1 attaching NULL sched-domain.
[ 48.354550] CPU0 attaching sched-domain:
[ 48.354560] domain 0: span 03
[ 48.354565] groups: 01 02
[ 48.354571] CPU1 attaching sched-domain:
[ 48.354575] domain 0: span 03
[ 48.354578] groups: 02 01
[ 49.414599] NET: Registered protocol family 17
[ 50.578928] eth1: Initial auth_alg=0
[ 50.578938] eth1: authenticate with AP 00:13:10:a6:4d:d9
[ 50.580092] eth1: RX authentication from 00:13:10:a6:4d:d9 (alg=0 transaction=2 status=0)
[ 50.580101] eth1: authenticated
[ 50.580105] eth1: associate with AP 00:13:10:a6:4d:d9
[ 50.581531] eth1: RX AssocResp from 00:13:10:a6:4d:d9 (capab=0x471 status=0 aid=1)
[ 50.581539] eth1: associated
[ 50.581545] eth1: CTS protection enabled (BSSID=00:13:10:a6:4d:d9)
[ 50.585424] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
[ 54.994936] eth1: no IPv6 routers present
ProblemType: Bug
Architecture: i386
Date: Mon Apr 28 08:23:54 2008
DistroRelease: Ubuntu 8.04
ExecutablePath: /usr/bin/yelp
Package: yelp 2.22.1-0ubuntu2
PackageArchitecture: i386
ProcEnviron:
PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
LANG=en_US.UTF-8
SHELL=/bin/bash
SourcePackage: yelp
Uname: Linux 2.6.24-16-generic i686
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/223638/+subscriptions
