dhis2-devs team mailing list archive
-
dhis2-devs team
-
Mailing list archive
-
Message #04476
Re: [Branch ~dhis2-devs-core/dhis2/trunk] Rev 1474: Work in progress on embedded help function. Finished data-web-maintenance-dataadmin module.
It suspect it has to do with the version of the plugin that is
available from the public maven repository. I did not have a chance to
test today, but you can get the snapshot version of the docbkx maven
plugin from
svn checkout http://docbkx-tools.googlecode.com/svn/trunk/
docbkx-tools-read-only
You can then deploy this to you local maven repository, and comment
out that line in the pom.xml that refers to the snapshot version. I
bet it will work then, if you add that stuff below to the pom as a new
goal.
I commented out that section, as the latest version 2.0.10 has not
been deployed yet to a repository. It would be good if they could push
this out at some point, as right now we have have to hack the version
of the DocBook (4.4) that is able to be rendered by version 2.0.9 of
the plugin. Serna produced DocBook 4.5 by default, so if you create a
new document in Serna, and try an render it with the dockx plugin, it
will not work, without manually hacking the version. If you use the
snapshot version, it will work. :(
Regards,
Jason
2010/2/24 Lars Helge Øverland <larshelge@xxxxxxxxx>:
>
>
> 2010/2/24 Jason Pickering <jason.p.pickering@xxxxxxxxx>
>>
>> Hi Lars,
>> I think Bob and I are seeing essentially the same pathway here. Let me
>> try and elaborate a bit more.
>>
>> Using the htmlCustomization property in the document pom.xml file,
>> along with a custom stylesheet, it should be possible to output a
>> custom x(html) from the documentation source build, for example
>> stripping out the screenshots and other ornaments that might not be
>> necessary for the inline help function. Look at the current pom and
>> see how I reference a custom stylesheet for the PDF transformation
>> (which actually needs work).
>>
>>
>> <foCustomization>${docbook.source}/en/resources/xsl/fop-cust.xsl</foCustomization>
>>
>> I would think that we could produce a separate output during the build
>> something like this, but not sure this is exactly valid...
>>
>>
>> <executions>
>> <execution>
>> <id>inline-help-xhtml</id>
>> <phase>package</phase>
>> <goals>
>> <goal>generate-xhtml</goal>
>> </goals>
>> <configuration>
>>
>> <htmlCustomization>${docbook.source}/en/resources/xsl/inline-cust.xsl</htmlCustomization>
>> <postProcess>
>> <copy todir="${dhis2_help.docs}/en/">
>> <fileset dir="target/docbkx/">
>> <include name="**/*.html" />
>> </fileset>
>> </copy>
>> </postProcess>
>> </configuration>
>> </execution>
>>
>
> OK I was actually just giving this a shot but it seems there is no specific
> goal for generate-xhtml in the plugin.. This link suggests a work-around but
> I couldn't make it work...
> http://groups.google.com/group/docbkx-tools-users/browse_thread/thread/d321fb26a435874d
> Maybe you can have a look at it if you have time...
>
>>
>> the dhis2_help variable would need to be defined obviously, and the
>> correct directory would need to be set. So during the packaging, the
>> docs would be generated first, then the web portal would package the
>> revised document up. This is what I was thinking anyway...
>>
>> Hope this is more clear.
>>
>> Best regards,
>> Jason
>>
>>
>>
>>
>> 2010/2/24 Bob Jolliffe <bobjolliffe@xxxxxxxxx>:
>> > Hi Lars
>> >
>> > I must admit that I was thinking along similar lines to Jason. The
>> > translation from docbook elements to (x)html elements does seem to be
>> > a bit redundant. Assuming that we were to include the full xhtml
>> > transform of the documentation with dhis anyway, then your online help
>> > can reference that as easily as the docbook source.
>> >
>> > But I do agree with all your points regarding locating and filtering
>> > the right content. So you might still use a transformation to do it.
>> > But you would apply it to doc-xhtml.xml rather than doc-docbk.xml.
>> > The transform would be a bit simpler - still locating the section by
>> > id (we need to just ensure that those ids are in the docbook src and
>> > they percolate through to the xhtml). The main difference would be
>> > that you wouldn't need to transform the elements in any way - just
>> > select and filter them.
>> >
>> > The way you might do this is to apply the identity transformation
>> > which simply copies input tree to output tree. Then you filter as
>> > appropriate. Very roughly speaking you might have something like this
>> > (assuming h3 tags had ids for help sections - as you know the key() is
>> > optional - I just cut and pasted):
>> >
>> > <xsl:param name="sectionId">learningObjectives</xsl:param>
>> >
>> > <xsl:key name="sections" match="/xhtml/body/h3" use="@id" />
>> >
>> > <!-- this will override the more general match -->
>> > <xsl:template match="h3">
>> > <xsl:copy>
>> > <!-- only process paras and lists from here-->
>> > <xsl:apply-templates select="p|ul|ol"/>
>> > </xsl:copy>
>> > </xsl:template>
>> >
>> >
>> > <!-- identity template
>> > in the absence of any more specific instructions - just copy all
>> > to all
>> > -->
>> > <xsl:template match="@*|node()">
>> > <xsl:copy>
>> > <xsl:apply-templates select="@*|node()"/>
>> > </xsl:copy>
>> > </xsl:template>
>> >
>> > <xsl:template match="/">
>> > <xsl:apply-templates select="key('sections',$sectionId)"/>
>> > </xsl:template>
>> >
>> > And I guess the source document needn't come from the docbook file in
>> > resources but from a url like http://localhost/docs/manual.xhtml. Or
>> > the file in resources - up to you.
>> >
>> > What do you think?
>> >
>> > Bob.
>> >
>> > PS. on an aside I am now more unsure that I have located the
>> > LocationManagerResolver in the wrong package. Here already there
>> > might be need for an additional resolver (ResourcesResolver).
>> > Currently if your xslt was any more complex and called an import() or
>> > document() function its going to resolve relative references via the
>> > locationmanager, which wouldn't be what you want. I think I should
>> > possibly make a uri resolvers package in import export module.
>> >
>> >
>> > 2010/2/24 Lars Helge Øverland <larshelge@xxxxxxxxx>:
>> >>
>> >>
>> >> 2010/2/24 Jason Pickering <jason.p.pickering@xxxxxxxxx>
>> >>>
>> >>> Hi Lars and company,
>> >>>
>> >>> I am just sitting here early in the morning with a cup of coffee, when
>> >>> typically my head is clearer. I am just wondering about the best way
>> >>> to do this. The DocBocX maven plugin is actually capable of applying a
>> >>> custom XSL to the DocBook XML source files. So, I am wondering if
>> >>> there is a need to have this code in DHIS, instead of relying on the
>> >>> documentation build process itself to output the required format (XML,
>> >>> XHTML). I am wondering about this a bit, as at some point the
>> >>> documents may be upgraded to DocBook 5.0, which might require further
>> >>> changes to the code itself inside of DHIS2. Since we have decided to
>> >>> keep the documentation branch separate from the main branch (which I
>> >>> think is actually the right thing to do), I am wondering what happens
>> >>> when maybe we upgrade to 5.0, or another version. The DocBkX maven
>> >>> plugin should provide the functionality required to output essentially
>> >>> any format, even if there needs to be a separate plugin built to
>> >>> export XML. I am not totally sure I understand all the mojo
>> >>> terminology here http://docbkx-tools.sourceforge.net/ but it would
>> >>> seem that the plugin is actually built from the DocBook XSL sources
>> >>> themselves, which are under constant development themselves
>> >>> (http://docbook.sourceforge.net/release/xsl/current/). It would seem
>> >>> good to reuse as much as we can from there, so as to insulate DHIS
>> >>> from different versions of DocBook.
>> >>>
>> >>> My other question would be, is the transformation from XML really
>> >>> necessary? If a browser renderable format such as XHTML was rendered
>> >>> properly and included with DHIS, would it be necessary to render the
>> >>> DocBook source at runtime? If appropriate <id> tags were used at
>> >>> sections in the document, it should be possible to find this directly
>> >>> in an XHTML document, as opposed to having to transform the document
>> >>> from XML source and into another format each time the user needs help.
>> >>> It would then be someones responsibility to map the ids in the docbook
>> >>> source, back to a specific URL of the application.
>> >>>
>> >>> Best regards,
>> >>> Jason
>> >>>
>> >>>
>> >>>
>> >> Hi,
>> >> thanks for providing feedback on this. First I am open for suggestions
>> >> on
>> >> improvements. Using XHTML as basis might very well be sensible.
>> >> They way I see it the xslt still gives you a few advantages:
>> >> - you can pick and choose the elements you need from the docbook file,
>> >> eg
>> >> omitting screenshots which we don't want in the help text
>> >> - only loading the part of the docbook file relevant for the current
>> >> help
>> >> text from the server, not the whole document.
>> >> - easily locating the right section.
>> >> I might be missing something from your suggestion though...
>> >> cheers
>> >> Lars
>> >>
>> >>>
>> >>> Anyway, some early morning thoughts..
>> >>>
>> >>> 2010/2/24 Lars Helge Øverland <larshelge@xxxxxxxxx>:
>> >>> >
>> >>> >
>> >>> > On Tue, Feb 23, 2010 at 9:36 PM, Bob Jolliffe
>> >>> > <bobjolliffe@xxxxxxxxx>
>> >>> > wrote:
>> >>> >>
>> >>> >> Just gave it a spin. Lars that's just too cool for words :-) Nice
>> >>> >> to
>> >>> >> see the transformer getting some exercise. And a great consequence
>> >>> >> of
>> >>> >> the move to docbook. Its hard to imagine how we could have linked
>> >>> >> this up to our original word documentation.
>> >>> >>
>> >>> >
>> >>> > Happy you liked it.. Also starting to like xslt, consider me a
>> >>> > member of
>> >>> > the
>> >>> > club:-)
>> >>> >
>> >>> >>
>> >>> >> On 23 February 2010 19:47, <noreply@xxxxxxxxxxxxx> wrote:
>> >>> >> > ------------------------------------------------------------
>> >>> >> > revno: 1474
>> >>> >> > committer: Lars Helge Oeverland <larshelge@xxxxxxxxx>
>> >>> >> > branch nick: trunk
>> >>> >> > timestamp: Tue 2010-02-23 20:44:51 +0100
>> >>> >> > message:
>> >>> >> > Work in progress on embedded help function. Finished
>> >>> >> > data-web-maintenance-dataadmin module.
>> >>> >> > modified:
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-options/src/main/java/org/hisp/dhis/options/help/DefaultHelpManager.java
>> >>> >> > dhis-2/dhis-options/src/main/resources/help_content.xml
>> >>> >> > dhis-2/dhis-options/src/main/resources/help_stylesheet.xsl
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/dhis-web-commons/css/widgets.css
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/images/help.png
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/macros.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataBrowserForm.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataIntegrityForm.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/duplicateDataEliminationForm.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/lockingForm.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/maintenanceForm.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/organisationUnitMergeForm.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/resourceTableForm.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/showcache.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/viewStatistics.vm
>> >>> >> >
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/zeroValueStorageManagement.vm
>> >>> >> >
>> >>> >> >
>> >>> >> > --
>> >>> >> > lp:dhis2
>> >>> >> > https://code.launchpad.net/~dhis2-devs-core/dhis2/trunk
>> >>> >> >
>> >>> >> > Your team DHIS 2 developers is subscribed to branch lp:dhis2.
>> >>> >> > To unsubscribe from this branch go to
>> >>> >> >
>> >>> >> >
>> >>> >> > https://code.launchpad.net/~dhis2-devs-core/dhis2/trunk/+edit-subscription.
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-options/src/main/java/org/hisp/dhis/options/help/DefaultHelpManager.java'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-options/src/main/java/org/hisp/dhis/options/help/DefaultHelpManager.java
>> >>> >> > 2010-02-23 17:10:02 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-options/src/main/java/org/hisp/dhis/options/help/DefaultHelpManager.java
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -48,11 +48,9 @@
>> >>> >> > {
>> >>> >> > try
>> >>> >> > {
>> >>> >> > - TransformerFactory factory =
>> >>> >> > TransformerFactory.newInstance();
>> >>> >> > -
>> >>> >> > Source stylesheet = new StreamSource( new
>> >>> >> > ClassPathResource(
>> >>> >> > "help_stylesheet.xsl" ).getInputStream() );
>> >>> >> >
>> >>> >> > - Transformer transformer = factory.newTransformer(
>> >>> >> > stylesheet );
>> >>> >> > + Transformer transformer =
>> >>> >> > TransformerFactory.newInstance().newTransformer( stylesheet );
>> >>> >> >
>> >>> >> > transformer.setParameter( "sectionId", id );
>> >>> >> >
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> > 'dhis-2/dhis-options/src/main/resources/help_content.xml'
>> >>> >> > --- dhis-2/dhis-options/src/main/resources/help_content.xml
>> >>> >> > 2010-02-23 17:10:02 +0000
>> >>> >> > +++ dhis-2/dhis-options/src/main/resources/help_content.xml
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,40 +1,276 @@
>> >>> >> > -<?xml version='1.0' encoding='UTF-8'?>
>> >>> >> > -<chapter>
>> >>> >> > - <title>Data Quality</title>
>> >>> >> > - <para>The data quality module provides means to improve the
>> >>> >> > quality
>> >>> >> > of the data in the system. This can be done through validation
>> >>> >> > rules
>> >>> >> > and
>> >>> >> > various statistical checks.</para>
>> >>> >> > - <section id="learningObjectives">
>> >>> >> > - <title>Learning Objectives</title>
>> >>> >> > - <para>After reading this module you will be able to
>> >>> >> > understand:</para>
>> >>> >> > - <orderedlist>
>> >>> >> > - <listitem>
>> >>> >> > - <para>What is data quality and its importance for
>> >>> >> > HMIS.</para>
>> >>> >> > - </listitem>
>> >>> >> > - <listitem>
>> >>> >> > - <para>How to do data quality check at point of data
>> >>> >> > entry.</para>
>> >>> >> > - </listitem>
>> >>> >> > - <listitem>
>> >>> >> > - <para>How to create data validation rules.</para>
>> >>> >> > - </listitem>
>> >>> >> > - <listitem>
>> >>> >> > - <para>How to carry out data triangulation.</para>
>> >>> >> > - </listitem>
>> >>> >> > - <listitem>
>> >>> >> > - <para>How to analyze data status.</para>
>> >>> >> > - </listitem>
>> >>> >> > - </orderedlist>
>> >>> >> > - <para>This stuff is in a paragraph</para>
>> >>> >> > - </section>
>> >>> >> > - <section id="overview">
>> >>> >> > - <title>Overview of data quality check</title>
>> >>> >> > - <para>Ensuring data quality is a key concern in building an
>> >>> >> > effective HMIS. Data quality has different dimensions
>> >>> >> > including:</para>
>> >>> >> > - <itemizedlist>
>> >>> >> > - <listitem>
>> >>> >> > - <para><emphasis>Correctness:</emphasis> Data should be
>> >>> >> > within
>> >>> >> > the normal range for data collected at that facility. There
>> >>> >> > should be
>> >>> >> > no
>> >>> >> > gross discrepancies when compared with data from related data
>> >>> >> > elements.</para>
>> >>> >> > - </listitem>
>> >>> >> > - <listitem>
>> >>> >> > - <para><emphasis>Completeness:</emphasis> Data for all
>> >>> >> > data
>> >>> >> > elements for all health facilities/blocks/Taluka/districts should
>> >>> >> > have been
>> >>> >> > submitted.</para>
>> >>> >> > - </listitem>
>> >>> >> > - </itemizedlist>
>> >>> >> > - <para>This stuff is in a paragraph</para>
>> >>> >> > - </section>
>> >>> >> > -</chapter>
>> >>> >> > +<?xml version='1.0' encoding='UTF-8'?>
>> >>> >> > +<?xml-stylesheet type="text/xsl" href="find.xsl"?>
>> >>> >> > +<book>
>> >>> >> > + <chapter>
>> >>> >> > + <title>Data Administration in DHIS 2</title>
>> >>> >> > + <para>The data administration module provides a range of
>> >>> >> > functions to ensure that the data stored in the DHIS2 database is
>> >>> >> > integral
>> >>> >> > and that the database performance is optimised. These functions
>> >>> >> > should be
>> >>> >> > executed on a regular basis by a data administrator to ensure
>> >>> >> > that
>> >>> >> > the
>> >>> >> > quality of the data stored is optimal. </para>
>> >>> >> > + <section id="dataBrowser">
>> >>> >> > + <title>Data browser</title>
>> >>> >> > + <para>The data browser maintenance module allows the
>> >>> >> > user to
>> >>> >> > produce a summary of the data contained in the DHIS2 database.
>> >>> >> > This
>> >>> >> > summary
>> >>> >> > provides the number of data element values that have been
>> >>> >> > recorded
>> >>> >> > for a
>> >>> >> > given time interval and then grouped by the following
>> >>> >> > options:</para>
>> >>> >> > + <itemizedlist>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Data sets</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Data element groups</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Organisational unit groups</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Organisational units</para>
>> >>> >> > + </listitem>
>> >>> >> > + </itemizedlist>
>> >>> >> > + <para>Each of these options can be accessed by selecting
>> >>> >> > the
>> >>> >> > desired option from <guilabel>"Browse by"
>> >>> >> > </guilabel>drop-down
>> >>> >> > menu. </para>
>> >>> >> > + <para>In order to produce a summary of submitted data
>> >>> >> > for a
>> >>> >> > given period and grouped by data sets, the user should follow
>> >>> >> > this
>> >>> >> > procedure. Begin by selecting a given periodicity type (e.g.
>> >>> >> > Weekly,
>> >>> >> > monthly, yearly, etc) and then a time interval (e.g. January 2009
>> >>> >> > to
>> >>> >> > March
>> >>> >> > 2009). Select the type of summary to be produced (e.g. Dataset)
>> >>> >> > from
>> >>> >> > the
>> >>> >> > "Browse by" drop-down menu. Click the
>> >>> >> > "Browse"
>> >>> >> > button to
>> >>> >> > view the summary. </para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="70%" align="center"
>> >>> >> > fileref="resources/images/maintainence/data_browser1.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para>A summary of the number of data element values
>> >>> >> > that
>> >>> >> > have
>> >>> >> > been submitted over the user selected time period is shown below.
>> >>> >> > </para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="80%" align="center"
>> >>> >> >
>> >>> >> > fileref="resources/images/maintainence/data_browsing_data_sets.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para> By clicking on the name of the individual
>> >>> >> > dataset, a
>> >>> >> > more detailed summary of each data element can be obtained as
>> >>> >> > shown
>> >>> >> > below.
>> >>> >> > A cross-tab table summarising each time period will be shown.
>> >>> >> > </para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="80%" align="center"
>> >>> >> >
>> >>> >> >
>> >>> >> > fileref="resources/images/maintainence/data_browser_dataset_detail.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para>The functionality of the grouping by Datasets,
>> >>> >> > Data
>> >>> >> > element groups, and Organisational groups is essentially the
>> >>> >> > same.
>> >>> >> > </para>
>> >>> >> > + <para>The functionality of grouping by organisation
>> >>> >> > units
>> >>> >> > will
>> >>> >> > be discussed below. Begin by selecting "Organisation
>> >>> >> > units"
>> >>> >> > from
>> >>> >> > the "Browse by" drop-down menu. The organisational
>> >>> >> > hierarchy
>> >>> >> > present in the database will now be displayed. Organisational
>> >>> >> > units
>> >>> >> > can be
>> >>> >> > expanded by clicking on the plus symbol in the organisational
>> >>> >> > tree
>> >>> >> > view.</para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="60%" align="center"
>> >>> >> >
>> >>> >> > fileref="resources/images/maintainence/data_browser_org_unit1.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para> By clicking on an organisational unit, and the
>> >>> >> > clicking
>> >>> >> > the "Browse" button, a summary of submitted data
>> >>> >> > elements
>> >>> >> > present
>> >>> >> > in the database is returned for all immediate children of the
>> >>> >> > selected
>> >>> >> > organisational as shown below</para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="60%" align="center"
>> >>> >> >
>> >>> >> > fileref="resources/images/maintainence/data_browser_orgunit2a.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para>By clicking on one of the organisational units, a
>> >>> >> > detailed list of data elements is presented by each time period
>> >>> >> > as
>> >>> >> > shown
>> >>> >> > below. <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="60%" align="center"
>> >>> >> > fileref="resources/images/maintainence/data_browser_orgunit2.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot></para>
>> >>> >> > + <para>For each of the data browser summaries, a PDF
>> >>> >> > export
>> >>> >> > can
>> >>> >> > be produced by specifying a filename in the "Filename"
>> >>> >> > field,
>> >>> >> > selecting a font size, a page layout (Landscape or Portrait) and
>> >>> >> > pressing
>> >>> >> > the <guibutton>"Export PDF"</guibutton> button. You
>> >>> >> > will
>> >>> >> > then be
>> >>> >> > prompted to select a location to save the file to, which can then
>> >>> >> > be
>> >>> >> > viewed
>> >>> >> > with any PDF reader (e.g. Adobe Acrobat Reader, xpdf, etc).
>> >>> >> > </para>
>> >>> >> > + </section>
>> >>> >> > + <section id="dataIntegrity">
>> >>> >> > + <title>Data integrity</title>
>> >>> >> > + <para>DHIS2 can perform a wide range of data integrity
>> >>> >> > checks
>> >>> >> > on the data contained in the database. Identifying and correcting
>> >>> >> > data
>> >>> >> > integrity issues is extremely important for ensuring that the
>> >>> >> > data
>> >>> >> > used for
>> >>> >> > analysis purposes is valid. Each of the data integrity checks
>> >>> >> > that
>> >>> >> > are
>> >>> >> > performed by the system will be described, along with general
>> >>> >> > procedures
>> >>> >> > that can be performed to resolve these issues. </para>
>> >>> >> > + <section>
>> >>> >> > + <title>Data elements without data set</title>
>> >>> >> > + <para>Each data element must be assigned to a data
>> >>> >> > set.
>> >>> >> > Values for data elements will not be able to be entered into the
>> >>> >> > system if a
>> >>> >> > data element is not assigned to a data set. Choose
>> >>> >> > Maintenance->Datasets->Edit from the main menu and then add
>> >>> >> > the
>> >>> >> > "orphaned" data element to the appropriate data set.
>> >>> >> > </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Data elements without groups</title>
>> >>> >> > + <para>Some Data Elements have been allocated to
>> >>> >> > several
>> >>> >> > Data
>> >>> >> > Element Groups. This is currently not allowed, because it will
>> >>> >> > result
>> >>> >> > in
>> >>> >> > duplication of linked data records in the PivotSource recordsets
>> >>> >> > that
>> >>> >> > `feed`
>> >>> >> > the pivot tables. Go to Maintenance -> Data Element Groups to
>> >>> >> > review each
>> >>> >> > Data Element identified and remove the incorrect Group
>> >>> >> > allocations.</para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Data elements assigned to data sets with
>> >>> >> > different
>> >>> >> > period types</title>
>> >>> >> > + <para>Data Elements should not be assigned to two
>> >>> >> > separate
>> >>> >> > data sets whose period types differ. The recommended approach
>> >>> >> > would
>> >>> >> > be to
>> >>> >> > create two separate data elements (for instance a monthly and
>> >>> >> > yearly
>> >>> >> > data
>> >>> >> > element) and assign these to respective datasets. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Data sets not assigned to organisation
>> >>> >> > units</title>
>> >>> >> > + <para>All data sets should be assigned to at least one
>> >>> >> > organisation unit. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Indicators with identical formulas</title>
>> >>> >> > + <para>Although this rule will not affect data quality,
>> >>> >> > it
>> >>> >> > generally does not make sense to have two indicators with the
>> >>> >> > exact
>> >>> >> > same
>> >>> >> > definition. Review the identified indicators and their formulas
>> >>> >> > and
>> >>> >> > delete
>> >>> >> > or modify any indicator that appears to be the duplicate.</para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Indicators without groups</title>
>> >>> >> > + <para>All Data Elements and Indicators must be
>> >>> >> > assigned to
>> >>> >> > at
>> >>> >> > least one group, so these Indicators need to be allocated to
>> >>> >> > their
>> >>> >> > correct
>> >>> >> > Data Element and Indicator Group. Go to Maintenance ->
>> >>> >> > Indicator
>> >>> >> > Groups,
>> >>> >> > and allocate each of the `Orphaned` Indicators to its correct
>> >>> >> > group.</para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Invalid indicator numerators</title>
>> >>> >> > + <para>Violations of this rule may be caused by an
>> >>> >> > incorrect
>> >>> >> > reference to a deleted or modified data element. Review the
>> >>> >> > indicator
>> >>> >> > and
>> >>> >> > make corrections to the numerator definition. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Invalid indicator denominators</title>
>> >>> >> > + <para>Violations of this rule may be caused by an
>> >>> >> > incorrect
>> >>> >> > reference to a deleted or modified data element. Review the
>> >>> >> > indicator
>> >>> >> > and
>> >>> >> > make corrections to the denominator definition. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title> Organisation units with cyclic
>> >>> >> > references</title>
>> >>> >> > + <para>Organisation units cannot be both parent and
>> >>> >> > children
>> >>> >> > of each other, directly nor indirectly.</para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Orphaned organisation units</title>
>> >>> >> > + <para>All organisation units must exist within the
>> >>> >> > organisation unit hierarchy. Go to Organisation->Hierarchy
>> >>> >> > Operations and
>> >>> >> > move the offending organisation unit into the proper position in
>> >>> >> > the
>> >>> >> > hierarchy. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Organisation units without groups</title>
>> >>> >> > + <para>All organisation units <emphasis>must</emphasis>
>> >>> >> > be
>> >>> >> > allocated to at least <emphasis>one</emphasis> group. The problem
>> >>> >> > might
>> >>> >> > either be that you have not defined any `compulsory` OrgUnit
>> >>> >> > Group
>> >>> >> > Set at
>> >>> >> > all, or that there are violations of the `compulsory` rule for
>> >>> >> > some
>> >>> >> > OrgUnits
>> >>> >> > . NOTE: If you have defined no `compulsory` OrgUnit Group Sets,
>> >>> >> > then
>> >>> >> > you
>> >>> >> > must first define them by going to Maintenance ->
>> >>> >> > Organisation
>> >>> >> > units->Organisation unit group sets and define at least one
>> >>> >> > `compulsory`
>> >>> >> > Group Set (the group set `OrgUnitType` are nearly universally
>> >>> >> > relevant). If
>> >>> >> > you have the relevant group sets, go to Maintenance -> OrgUnit
>> >>> >> > Groups to
>> >>> >> > review each OrgUnit identified and add the relevant Group
>> >>> >> > allocation.</para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Organisation units violating compulsory group
>> >>> >> > sets</title>
>> >>> >> > + <para>These organisation units have not been assigned
>> >>> >> > to
>> >>> >> > the
>> >>> >> > any organisation unit group within one of the
>> >>> >> > <emphasis>compulsory</emphasis> organisation unit group sets.
>> >>> >> > When a
>> >>> >> > group
>> >>> >> > set is defined as `compulsory`, it means that an organisation
>> >>> >> > unit
>> >>> >> > must be
>> >>> >> > allocated to at least one organisation unit group within that
>> >>> >> > group
>> >>> >> > set. For
>> >>> >> > instance, all organisation units must belong to one of the groups
>> >>> >> > in
>> >>> >> > the
>> >>> >> > `organisation unitType` group set. It might belong to the
>> >>> >> > `Hospital`
>> >>> >> > or the
>> >>> >> > `Clinic` or any other `type` group - but it must belong to
>> >>> >> > exactly
>> >>> >> > one of
>> >>> >> > them. Go to Maintenance -> organisation unit->Organisation
>> >>> >> > unit
>> >>> >> > groups to review each organisation unit identified in the
>> >>> >> > integrity
>> >>> >> > check.
>> >>> >> > Allocate all organisation units to exactly one group. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Organisation units violating exclusive group
>> >>> >> > sets</title>
>> >>> >> > + <para>Some organisation units have been allocated to
>> >>> >> > several
>> >>> >> > organisation unit groups that are members of the same exclusive
>> >>> >> > organisation
>> >>> >> > unit group set. When a group set is defined as exclusive, it
>> >>> >> > means
>> >>> >> > that an
>> >>> >> > organisation unit can <emphasis>only</emphasis> be allocated to
>> >>> >> > <emphasis>one</emphasis> organisation unit group within that
>> >>> >> > Group
>> >>> >> > Set. For
>> >>> >> > instance, one organisation unit cannot normally belong to the
>> >>> >> > both
>> >>> >> > the
>> >>> >> > 'Hospital' and 'Clinic' groups , but rather
>> >>> >> > to
>> >>> >> > only to
>> >>> >> > one of them. Go to Maintenance -> organisation
>> >>> >> > unit->Organisation unit
>> >>> >> > groups to review each organisation unit identified in the
>> >>> >> > integrity
>> >>> >> > check.
>> >>> >> > Remove the organisation unit from all groups except the one that
>> >>> >> > it
>> >>> >> > should
>> >>> >> > be allocated to. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title> Organisation unit groups without group
>> >>> >> > sets</title>
>> >>> >> > + <para>The organisation unit groups listed here have
>> >>> >> > not
>> >>> >> > been
>> >>> >> > allocated to a group set. Go to Maintenance->Organisation
>> >>> >> > unit->Organisation unit group sets and allocate the
>> >>> >> > Organisation
>> >>> >> > unit
>> >>> >> > group to the appropriate group set. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Validation rules without groups</title>
>> >>> >> > + <para>All validation rules must be assigned to a
>> >>> >> > group. Go
>> >>> >> > to
>> >>> >> > <command>Services->Data quality->Validation rule
>> >>> >> > group</command> and
>> >>> >> > assign the offending validation rule to a group. </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Invalid validation rule left side
>> >>> >> > expressions</title>
>> >>> >> > + <para>An error exists in the left-side validation rule
>> >>> >> > definition. Go to <command>Services->Data
>> >>> >> > quality->Validation
>> >>> >> > rule</command> and click the "Edit" icon on the
>> >>> >> > offending
>> >>> >> > rule.
>> >>> >> > Press "Edit left side" and make the corrections that
>> >>> >> > are
>> >>> >> > required.
>> >>> >> > </para>
>> >>> >> > + </section>
>> >>> >> > + <section>
>> >>> >> > + <title>Invalid validation rule right side
>> >>> >> > expressions</title>
>> >>> >> > + <para>An error exists in the left-side validation rule
>> >>> >> > definition. Go to <command>Services->Data
>> >>> >> > quality->Validation
>> >>> >> > rule</command> and click the "Edit" icon on the
>> >>> >> > offending
>> >>> >> > rule.
>> >>> >> > Press "Edit right side" and make the corrections that
>> >>> >> > are
>> >>> >> > required.</para>
>> >>> >> > + </section>
>> >>> >> > + </section>
>> >>> >> > + <section id="maintenance">
>> >>> >> > + <title>Maintenance</title>
>> >>> >> > + <para>The data maintenance module has five options, each
>> >>> >> > described below. </para>
>> >>> >> > + <itemizedlist>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Clear hierarchy history</para>
>> >>> >> > + <para>DHIS 2 maintains an audit trail of changes to
>> >>> >> > the
>> >>> >> > organisation unit hierarchy for aggregation purposes. This
>> >>> >> > function
>> >>> >> > clears
>> >>> >> > the hierarchy history.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Clear data mart (aggregated datavalues)</para>
>> >>> >> > + <para>The data mart is where DHIS 2 stores
>> >>> >> > aggregated
>> >>> >> > data
>> >>> >> > produced during the export to data mart process. This function
>> >>> >> > clears
>> >>> >> > the
>> >>> >> > database table which contains aggregated data element
>> >>> >> > values.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Clear data mart (aggregated
>> >>> >> > indicatorvalues)</para>
>> >>> >> > + <para>The data mart is where DHIS 2 stores
>> >>> >> > aggregated
>> >>> >> > data
>> >>> >> > produced during the export to data mart process. This function
>> >>> >> > clears
>> >>> >> > the
>> >>> >> > database table which contains aggregated indicator
>> >>> >> > values.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Clear zero values</para>
>> >>> >> > + <para>This function removes zero data values from
>> >>> >> > the
>> >>> >> > database. Values registered for data elements with aggregation
>> >>> >> > operator
>> >>> >> > <emphasis role="italic">average</emphasis> is not removed, as
>> >>> >> > such
>> >>> >> > values
>> >>> >> > will be significant when aggregating the data, contrary to values
>> >>> >> > registered
>> >>> >> > for data elements with aggregation operator <emphasis
>> >>> >> > role="italic">sum</emphasis>. Reducing the number of data values
>> >>> >> > will
>> >>> >> > improve system performance.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Clear dataset completeness</para>
>> >>> >> > + <para>This function removes aggregated dataset
>> >>> >> > completeness
>> >>> >> > values. This data is produced and used by report tables.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Prune periods</para>
>> >>> >> > + <para>This function removes all periods which have
>> >>> >> > no
>> >>> >> > registered data values. Reducing the number of periods will
>> >>> >> > improve
>> >>> >> > system
>> >>> >> > performance.</para>
>> >>> >> > + </listitem>
>> >>> >> > + </itemizedlist>
>> >>> >> > + </section>
>> >>> >> > + <section id="resourceTables">
>> >>> >> > + <title>Resource tables</title>
>> >>> >> > + <para>Resource tables are supporting tables that are
>> >>> >> > used
>> >>> >> > during analysis of data. One would typically join the contents of
>> >>> >> > these
>> >>> >> > tables with the data value table when doing queries from
>> >>> >> > third-party
>> >>> >> > applications like Microsoft Excel. Simply select the tables that
>> >>> >> > should be
>> >>> >> > regenerated and press "Generate tables". Regeneration
>> >>> >> > of
>> >>> >> > the
>> >>> >> > resource tables should only be done once all data integrity
>> >>> >> > issues
>> >>> >> > are
>> >>> >> > resolved. </para>
>> >>> >> > + <itemizedlist>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Organisation unit structure
>> >>> >> > (orgunitstructure)</para>
>> >>> >> > + <para>This table should be regenerated any time
>> >>> >> > there
>> >>> >> > have
>> >>> >> > been any changes made to the organisational unit hierarchy. This
>> >>> >> > table
>> >>> >> > provides information about the organisation unit hierarchy. It
>> >>> >> > has
>> >>> >> > one row
>> >>> >> > for each organisation unit, one column for each organisation
>> >>> >> > unit
>> >>> >> > level and
>> >>> >> > the organisation unit identifiers for all parents in the lineage
>> >>> >> > as
>> >>> >> > values.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Exclusive organisation unit groupset structure
>> >>> >> > normalized (orgunitgroupsetstructure)</para>
>> >>> >> > + <para>This table provides information about the
>> >>> >> > which
>> >>> >> > organisation units are member of which organisation unit group
>> >>> >> > sets.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Data element group set structure
>> >>> >> > (_dataelementgroupsetstructure)</para>
>> >>> >> > + <para>This table provides information about which
>> >>> >> > data
>> >>> >> > elements are members of which data element group sets. The table
>> >>> >> > has
>> >>> >> > one row
>> >>> >> > for each data element, one column for each data element group
>> >>> >> > set
>> >>> >> > and the
>> >>> >> > names of the data element group as values.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Indicator group set structure
>> >>> >> > (_indicatorgroupsetstructure)</para>
>> >>> >> > + <para>This table provides information about which
>> >>> >> > indicators are members of which indicator group sets. The table
>> >>> >> > has
>> >>> >> > one row
>> >>> >> > for each indicator, one column for each indicator group set and
>> >>> >> > the
>> >>> >> > names of
>> >>> >> > the indicator group as values.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Organisation unit group set structure
>> >>> >> > (_organisationunitgroupsetstructure)</para>
>> >>> >> > + <para>This table provides information about which
>> >>> >> > organisation units are members of which organisation unit group
>> >>> >> > sets.
>> >>> >> > The
>> >>> >> > table has one row for each organisation unit, one column for each
>> >>> >> > organisation unit group set and the names of the organisation
>> >>> >> > unit
>> >>> >> > groups as
>> >>> >> > values.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Category structure (_categorystructure)</para>
>> >>> >> > + <para>This table provides information about which
>> >>> >> > data
>> >>> >> > elements are members of which categories. The table has one row
>> >>> >> > for
>> >>> >> > each
>> >>> >> > data element, one column for each category and the names of the
>> >>> >> > category
>> >>> >> > options as values.</para>
>> >>> >> > + </listitem>
>> >>> >> > + <listitem>
>> >>> >> > + <para>Data element category option combo name
>> >>> >> > (categoryoptioncomboname)</para>
>> >>> >> > + <para>This table should be regenerated any time
>> >>> >> > there
>> >>> >> > have
>> >>> >> > been changes made to the category combination names. It contains
>> >>> >> > readable
>> >>> >> > names for the various combinations of categories.</para>
>> >>> >> > + </listitem>
>> >>> >> > + </itemizedlist>
>> >>> >> > + </section>
>> >>> >> > + <section id="organisationUnitMerge">
>> >>> >> > + <title>Organisation unit merge</title>
>> >>> >> > + <para>This function is useful when two organisation
>> >>> >> > units
>> >>> >> > need
>> >>> >> > to be merged, eg. it is decided that one facility will be shut
>> >>> >> > down
>> >>> >> > and its
>> >>> >> > services will be provided by a nearby facility.</para>
>> >>> >> > + <para>Start by selecting the organisation unit to
>> >>> >> > eliminate
>> >>> >> > from the tree and click <emphasis
>> >>> >> > role="italic">confirm</emphasis>.
>> >>> >> > Then
>> >>> >> > select the organisation unit to keep and click <emphasis
>> >>> >> > role="italic">confirm</emphasis> again. Finally, verify the
>> >>> >> > selection
>> >>> >> > and
>> >>> >> > click <emphasis role="italic">merge</emphasis>. </para>
>> >>> >> > + <para>In the sitation where data exist for the
>> >>> >> > organisation
>> >>> >> > unit to eliminate and not for the one to keep, the data will be
>> >>> >> > moved
>> >>> >> > to the
>> >>> >> > one to keep. When data exists for both organisation units, the
>> >>> >> > data
>> >>> >> > will be
>> >>> >> > summarized and moved to the one to keep. When data exists only
>> >>> >> > for
>> >>> >> > the one
>> >>> >> > to keep, no action is taken. The organisation unit to eliminate
>> >>> >> > will
>> >>> >> > eventually be deleted.</para>
>> >>> >> > + </section>
>> >>> >> > + <section id="duplicateDataElimination">
>> >>> >> > + <title>Duplicate data elimination</title>
>> >>> >> > + <para>This function is useful when data has been entered
>> >>> >> > mistakenly for two data elements which represents the same
>> >>> >> > phenomena.</para>
>> >>> >> > + <para>Start by selecting the data element to eliminate
>> >>> >> > from
>> >>> >> > the
>> >>> >> > list and click confirm. Then select the data element to keep and
>> >>> >> > click
>> >>> >> > confirm again. Finally, verify the selection and click
>> >>> >> > merge.</para>
>> >>> >> > + <para>In the situation where data exists for the data
>> >>> >> > element
>> >>> >> > to eliminate and not for the one to keep, the data will be moved
>> >>> >> > to
>> >>> >> > the one
>> >>> >> > to keep. When data exists for both data elements, the data which
>> >>> >> > was
>> >>> >> > updated
>> >>> >> > last will be used. When data exists only for the one to keep, no
>> >>> >> > action will
>> >>> >> > be taken. The data element to eliminate will eventually be
>> >>> >> > deleted,
>> >>> >> > except
>> >>> >> > when it is a multidimensional data element and has other data
>> >>> >> > registered.</para>
>> >>> >> > + </section>
>> >>> >> > + <section id="dataStatistics">
>> >>> >> > + <title>Data statistics</title>
>> >>> >> > + <para>The data statistics module provides an overview of
>> >>> >> > the
>> >>> >> > number of objects stored in the DHIS2 database. </para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="80%" align="center"
>> >>> >> > fileref="resources/images/maintainence/data_stats.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para>The total number of each type of object is
>> >>> >> > presented
>> >>> >> > in a
>> >>> >> > table, as well as a graph. </para>
>> >>> >> > + </section>
>> >>> >> > + <section id="dataLocking">
>> >>> >> > + <title>Data locking</title>
>> >>> >> > + <para>This module gives users the privilege of locking
>> >>> >> > certain
>> >>> >> > datasets for chosen organisation units. This encourages timely
>> >>> >> > data
>> >>> >> > entry
>> >>> >> > and prevents unwanted to changes to the data once it has been
>> >>> >> > entered. When
>> >>> >> > the ‘Data Administration’ option is chosen the data locking
>> >>> >> > interface
>> >>> >> > is
>> >>> >> > displayed. The user has to select the periodicity of the report
>> >>> >> > e.g.
>> >>> >> > monthly, quarterly or
>> >>> >> > + yearly for which the data is to be locked. The month, quarter
>> >>> >> > or
>> >>> >> > year
>> >>> >> > for which the reports are to be locked is then specified. </para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="80%" align="center"
>> >>> >> > fileref="resources/images/maintainence/data_locking_select1.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para>The unlocked data sets for the period are
>> >>> >> > displayed
>> >>> >> > and
>> >>> >> > the user will then have to choose the data sets to be locked.
>> >>> >> > + </para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="80%" align="center"
>> >>> >> > fileref="resources/images/maintainence/data_locking_select2.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para>After choosing the datasets to be locked, double
>> >>> >> > click
>> >>> >> > on
>> >>> >> > each one by one to display the organisation unit tree in the
>> >>> >> > field
>> >>> >> > below.
>> >>> >> > Click on the organisation unit to lock the dataset.
>> >>> >> > + </para>
>> >>> >> > + <screenshot>
>> >>> >> > + <mediaobject>
>> >>> >> > + <imageobject>
>> >>> >> > + <imagedata width="80%" align="center"
>> >>> >> > fileref="resources/images/maintainence/data_locking_select3.png"
>> >>> >> > format="PNG"/>
>> >>> >> > + </imageobject>
>> >>> >> > + </mediaobject>
>> >>> >> > + </screenshot>
>> >>> >> > + <para>The <guibutton>Apply Locks on All</guibutton>
>> >>> >> > button
>> >>> >> > locks the dataset for all the organisation units to which that
>> >>> >> > dataset has
>> >>> >> > been assigned. <guibutton>‘Remove locks on All’</guibutton>
>> >>> >> > removes
>> >>> >> > all
>> >>> >> > locks put on the organisation units corresponding to the selected
>> >>> >> > dataset.
>> >>> >> > After the operations are completed the user must click
>> >>> >> > <guibutton>‘Save’</guibutton> to apply the settings. The
>> >>> >> > <guibutton>‘Lock at
>> >>> >> > level’</guibutton> button locks datasets at a particular level
>> >>> >> > that
>> >>> >> > the user
>> >>> >> > chooses. . <guibutton>‘Unlock at Level’</guibutton> removes locks
>> >>> >> > that have
>> >>> >> > been put on the organisation units corresponding to the selected
>> >>> >> > dataset at
>> >>> >> > the selected level. After the operations are completed, the user
>> >>> >> > must
>> >>> >> > click
>> >>> >> > <guibutton>‘Save’</guibutton> to apply the settings. The
>> >>> >> > <guibutton>‘Save’</guibutton> button will also lock those
>> >>> >> > organisation unit
>> >>> >> > datasets that have been specified by the user.
>> >>> >> > + </para>
>> >>> >> > + </section>
>> >>> >> > + <section id="zeroValueStorage">
>> >>> >> > + <title>Zero value storage</title>
>> >>> >> > + <para>The zero value storage function makes it possible
>> >>> >> > to
>> >>> >> > define for which data elements the system should store zero
>> >>> >> > values.
>> >>> >> > In most
>> >>> >> > cases zeros are significant only for a subset of the data
>> >>> >> > elements in
>> >>> >> > the
>> >>> >> > database. Zero values will be ignored during data entry for
>> >>> >> > selected
>> >>> >> > data
>> >>> >> > elements.</para>
>> >>> >> > + </section>
>> >>> >> > + <section id="cacheStatistics">
>> >>> >> > + <title>Cache Statistics </title>
>> >>> >> > + <para>This option is for system administrators only to
>> >>> >> > use.
>> >>> >> > The
>> >>> >> > cache statistics shows the status of the application level cache.
>> >>> >> > The
>> >>> >> > application level cache refers to the objects and query results
>> >>> >> > that
>> >>> >> > the
>> >>> >> > application is caching in order to speed up performance. If the
>> >>> >> > database has
>> >>> >> > been modified directly the application cache needs to be cleared
>> >>> >> > for
>> >>> >> > it to
>> >>> >> > take effect.</para>
>> >>> >> > + </section>
>> >>> >> > + </chapter>
>> >>> >> > +</book>
>> >>> >> > \ No newline at end of file
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> > 'dhis-2/dhis-options/src/main/resources/help_stylesheet.xsl'
>> >>> >> > --- dhis-2/dhis-options/src/main/resources/help_stylesheet.xsl
>> >>> >> > 2010-02-23 17:10:02 +0000
>> >>> >> > +++ dhis-2/dhis-options/src/main/resources/help_stylesheet.xsl
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -28,7 +28,7 @@
>> >>> >> > </xsl:template>
>> >>> >> >
>> >>> >> > <xsl:template match="/">
>> >>> >> > - <xsl:apply-templates
>> >>> >> > select="chapter/section[@id=$sectionId]"/>
>> >>> >> > + <xsl:apply-templates
>> >>> >> > select="book/chapter/section[@id=$sectionId]"/>
>> >>> >> > </xsl:template>
>> >>> >> >
>> >>> >> > </xsl:stylesheet>
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/dhis-web-commons/css/widgets.css'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/dhis-web-commons/css/widgets.css
>> >>> >> > 2010-02-23 18:58:09 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/dhis-web-commons/css/widgets.css
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -18,6 +18,7 @@
>> >>> >> > padding-right: 15px;
>> >>> >> > padding-top: 9px;
>> >>> >> > padding-bottom: 9px;
>> >>> >> > + overflow: auto;
>> >>> >> > }
>> >>> >> >
>> >>> >> > #hideRightBar
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/images/help.png'
>> >>> >> > Binary files
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/images/help.png
>> >>> >> > 2009-04-20 14:54:22 +0000 and
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/images/help.png
>> >>> >> > 2010-02-23 19:44:51 +0000 differ
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/macros.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/macros.vm
>> >>> >> > 2009-11-02 18:13:58 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-commons-resources/src/main/webapp/macros.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -91,7 +91,7 @@
>> >>> >> > #end
>> >>> >> >
>> >>> >> > #macro( openHelp $id )
>> >>> >> > -<a href="javascript:openHelpForm('${id}')"
>> >>> >> > title="$i18n.getString(
>> >>> >> > 'help' )"><img src="../images/help.png" alt="$i18n.getString(
>> >>> >> > 'help'
>> >>> >> > )"></a>
>> >>> >> > +<a href="javascript:getHelpContent('${id}')"
>> >>> >> > title="$i18n.getString(
>> >>> >> > 'help' )"><img src="../images/help.png" alt="$i18n.getString(
>> >>> >> > 'help'
>> >>> >> > )"></a>
>> >>> >> > #end
>> >>> >> >
>> >>> >> > #macro( introListItem $action $objectKey )
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataBrowserForm.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataBrowserForm.vm
>> >>> >> > 2009-10-28 12:38:33 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataBrowserForm.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,5 +1,5 @@
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "data_browser" )</h3>
>> >>> >> > +<h3>$i18n.getString( "data_browser" ) #openHelp( "dataBrowser"
>> >>> >> > )</h3>
>> >>> >> >
>> >>> >> > <form method="get" action="searchResult.action" onsubmit="return
>> >>> >> > validate()">
>> >>> >> >
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataIntegrityForm.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataIntegrityForm.vm
>> >>> >> > 2010-02-01 15:30:27 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/dataIntegrityForm.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -6,7 +6,7 @@
>> >>> >> >
>> >>> >> > #end
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "data_integrity_checks_performed" )</h3>
>> >>> >> > +<h3>$i18n.getString( "data_integrity_checks_performed" )
>> >>> >> > #openHelp(
>> >>> >> > "dataIntegrity" )</h3>
>> >>> >> >
>> >>> >> > #parse( "dhis-web-commons/loader/loader.vm" )
>> >>> >> >
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/duplicateDataEliminationForm.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/duplicateDataEliminationForm.vm
>> >>> >> > 2010-02-04 12:29:22 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/duplicateDataEliminationForm.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,5 +1,5 @@
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "duplicate_data_elimination" )</h3>
>> >>> >> > +<h3>$i18n.getString( "duplicate_data_elimination" ) #openHelp(
>> >>> >> > "duplicateDataElimination" )</h3>
>> >>> >> >
>> >>> >> > <div>
>> >>> >> > <label>$i18n.getString( "filter" ):</label><br>
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/lockingForm.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/lockingForm.vm
>> >>> >> > 2009-12-29 07:14:28 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/lockingForm.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,4 +1,4 @@
>> >>> >> > -<h3>$i18n.getString( "data_locking_form" )</h3>
>> >>> >> > +<h3>$i18n.getString( "data_locking_form" ) #openHelp(
>> >>> >> > "dataLocking"
>> >>> >> > )</h3>
>> >>> >> >
>> >>> >> > <span id="message"></span>
>> >>> >> >
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/maintenanceForm.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/maintenanceForm.vm
>> >>> >> > 2009-12-17 09:22:20 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/maintenanceForm.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,5 +1,5 @@
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "maintenance" )</h3>
>> >>> >> > +<h3>$i18n.getString( "maintenance" ) #openHelp( "maintenance"
>> >>> >> > )</h3>
>> >>> >> >
>> >>> >> > <p>
>> >>> >> > <input type="checkbox" id="hierarchyHistory">
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/organisationUnitMergeForm.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/organisationUnitMergeForm.vm
>> >>> >> > 2010-01-25 11:54:22 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/organisationUnitMergeForm.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,5 +1,5 @@
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "organisation_unit_merge" )</h3>
>> >>> >> > +<h3>$i18n.getString( "organisation_unit_merge" ) #openHelp(
>> >>> >> > "organisationUnitMerge" )</h3>
>> >>> >> >
>> >>> >> > <div id="selectionTree" style="width:500px; height:200px"></div>
>> >>> >> >
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/resourceTableForm.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/resourceTableForm.vm
>> >>> >> > 2010-01-15 11:32:18 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/resourceTableForm.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,5 +1,5 @@
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "resource_table" )</h3>
>> >>> >> > +<h3>$i18n.getString( "resource_table" )#openHelp(
>> >>> >> > "resourceTables"
>> >>> >> > )</h3>
>> >>> >> >
>> >>> >> > <p>
>> >>> >> > <input type="checkbox" id="organisationUnit">
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/showcache.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/showcache.vm
>> >>> >> > 2009-03-03 16:46:36 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/showcache.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -9,7 +9,7 @@
>> >>> >> > }
>> >>> >> > </style>
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "cache_statistics" )</h3>
>> >>> >> > +<h3>$i18n.getString( "cache_statistics" ) #openHelp(
>> >>> >> > "cacheStatistics"
>> >>> >> > )</h3>
>> >>> >> >
>> >>> >> > <p><input type="button" style="width:150px"
>> >>> >> > value="$i18n.getString(
>> >>> >> > 'clear_cache' )"
>> >>> >> > onclick="window.location.href='clearCache.action'"></p>
>> >>> >> >
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/viewStatistics.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/viewStatistics.vm
>> >>> >> > 2009-10-07 18:53:11 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/viewStatistics.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,5 +1,5 @@
>> >>> >> >
>> >>> >> > -<h3>$i18n.getString( "data_statistics" )</h3>
>> >>> >> > +<h3>$i18n.getString( "data_statistics" ) #openHelp(
>> >>> >> > "dataStatistics"
>> >>> >> > )</h3>
>> >>> >> >
>> >>> >> > <table>
>> >>> >> > <tr>
>> >>> >> >
>> >>> >> > === modified file
>> >>> >> >
>> >>> >> >
>> >>> >> > 'dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/zeroValueStorageManagement.vm'
>> >>> >> > ---
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/zeroValueStorageManagement.vm
>> >>> >> > 2010-01-28 09:50:27 +0000
>> >>> >> > +++
>> >>> >> >
>> >>> >> >
>> >>> >> > dhis-2/dhis-web/dhis-web-maintenance/dhis-web-maintenance-dataadmin/src/main/webapp/dhis-web-maintenance-dataadmin/zeroValueStorageManagement.vm
>> >>> >> > 2010-02-23 19:44:51 +0000
>> >>> >> > @@ -1,4 +1,5 @@
>> >>> >> > -<h3>$i18n.getString( "zero_storage_management" )</h3>
>> >>> >> > +
>> >>> >> > +<h3>$i18n.getString( "zero_storage_management" ) #openHelp(
>> >>> >> > "zeroValueStorage" )</h3>
>> >>> >> > <br>
>> >>> >> > <form id="ZeroDataValueManagement" method="POST"
>> >>> >> > action="updateZeroIsSignificantForDataElements.action">
>> >>> >> > <table>
>> >>> >> >
>> >>> >> >
>> >>> >> > _______________________________________________
>> >>> >> > Mailing list: https://launchpad.net/~dhis2-devs
>> >>> >> > Post to : dhis2-devs@xxxxxxxxxxxxxxxxxxx
>> >>> >> > Unsubscribe : https://launchpad.net/~dhis2-devs
>> >>> >> > More help : https://help.launchpad.net/ListHelp
>> >>> >> >
>> >>> >> >
>> >>> >>
>> >>> >> _______________________________________________
>> >>> >> Mailing list: https://launchpad.net/~dhis2-devs
>> >>> >> Post to : dhis2-devs@xxxxxxxxxxxxxxxxxxx
>> >>> >> Unsubscribe : https://launchpad.net/~dhis2-devs
>> >>> >> More help : https://help.launchpad.net/ListHelp
>> >>> >
>> >>> >
>> >>> > _______________________________________________
>> >>> > Mailing list: https://launchpad.net/~dhis2-devs
>> >>> > Post to : dhis2-devs@xxxxxxxxxxxxxxxxxxx
>> >>> > Unsubscribe : https://launchpad.net/~dhis2-devs
>> >>> > More help : https://help.launchpad.net/ListHelp
>> >>> >
>> >>> >
>> >>
>> >>
>> >
>
>
References
