dhis2-users team mailing list archive
-
dhis2-users team
-
Mailing list archive
-
Message #15192
Re: posting dhis2 metadata
Hi Isaiah,
Please post your question back to the user list and I will answer there.
Regards,
Jason
On Thu, Feb 15, 2018 at 5:45 AM, Isaiah Nyabuto <isaiahnyabuto@xxxxxxxxx>
wrote:
> Hi Jason,
>
> I am following your guide on bootstrapping dhis2. Please see my steps
> below and assist.
>
> Thank you.
> ---------- Forwarded message ----------
> From: Isaiah Nyabuto <isaiahnyabuto@xxxxxxxxx>
> Date: Thu, Feb 15, 2018 at 7:40 AM
> Subject: Re: [Dhis2-users] posting dhis2 metadata
> To: Aaron C White <aaroncwhite@xxxxxxxxx>
>
>
> Hi Aaron,
>
> Thank you. I am also following Jason examples on bootstrapping dhis2. I
> am using httr.
>
> Firstly, this is how my original df looks like.
>
> head(org) name uid code parent shortname
> 1 Wikithuki Dispensary Bc371uxfYD5 16925 vpiZlB5cdK7 Wikithuki Dispensary
> 2 Gemifa Medical Clinic Z7Lf1n3Fcpi 22907 mEZBjj4fLBT Gemifa
> 3 Olympus Medical Clinic NAbQdHuaJFK 22906 PeEcMfBchbr Olympus
> 4 Masaba Community Health Unit tYwHeLSnHyb 600616 QR2K4k8VKF1 Masaba CHU
> 5 Gatunga Health Centre cmay4WXRmhA 12034 IcAegRcGuV6 Gatunga Health Centre
> 6 Cfw Kimangaru Clinic E52UsoBxJVS 11966 vEAFtHnPDrX CFW Kimangaru Clinic
> description openingdate closedate comment featuretype coordinates url
> 1 NA NA POINT [37.95263,-0.77819]
> 2 Clinic NA NA NONE [34.391914,0.059575]
> 3 Clinic NA NA NONE [34.3994,0.059575]
> 4 Community Unit NA NA NONE [34.46411,0.19358]
> 5 NA NA POINT [37.9423,-0.29656]
> 6 NA NA POINT [37.53009,-0.54506]
> contactperson address email phonenumber
> 1 NA NA NA NA
> 2 NA NA NA NA
> 3 NA NA NA NA
> 4 NA NA NA NA
> 5 NA NA NA NA
> 6 NA NA NA NA
>
>
>
> I followed the following steps to prepare my df for import.
> 1. Removed all the NAs and columns with entire NAs.
>
> head(new_org) name uid code parent shortname
> 1 Wikithuki Dispensary Bc371uxfYD5 16925 vpiZlB5cdK7 Wikithuki Dispensary
> 2 Gemifa Medical Clinic Z7Lf1n3Fcpi 22907 mEZBjj4fLBT Gemifa
> 3 Olympus Medical Clinic NAbQdHuaJFK 22906 PeEcMfBchbr Olympus
> 4 Masaba Community Health Unit tYwHeLSnHyb 600616 QR2K4k8VKF1 Masaba CHU
> 5 Gatunga Health Centre cmay4WXRmhA 12034 IcAegRcGuV6 Gatunga Health Centre
> 6 Cfw Kimangaru Clinic E52UsoBxJVS 11966 vEAFtHnPDrX CFW Kimangaru Clinic
> description comment featuretype coordinates url
> 1 POINT [37.95263,-0.77819]
> 2 Clinic NONE [34.391914,0.059575]
> 3 Clinic NONE [34.3994,0.059575]
> 4 Community Unit NONE [34.46411,0.19358]
> 5 POINT [37.9423,-0.29656]
> 6 POINT [37.53009,-0.54506]
>
>
> 3. Then post the data as follows.
>
> dest.url <- "http://localhost/dhis/"
> url <- paste0(dest.url, "api/metadata?importStrategy=C
> REATE&atomicMode=NONE")
> r <- POST(url, authenticate(dest.user, dest.pass),
> body = toJSON(new_org, auto_unbox = TRUE),
> content_type_json())
> assertthat::assert_that(r$status_code==200)
>
> 4. The body looks like.
>
> jsonlite::toJSON(me, auto_unbox = TRUE)[{"name":"Wikithuki Dispensary","uid":"Bc371uxfYD5","code":"16925","parent":"vpiZlB5cdK7","shortname":"Wikithuki Dispensary","description":"","comment":"","featuretype":"POINT","coordinates":"[37.95263,-0.77819]","url":""},{"name":"Gemifa Medical Clinic","uid":"Z7Lf1n3Fcpi","code":"22907","parent":"mEZBjj4fLBT","shortname":"Gemifa","description":"Clinic","comment":"","featuretype":"NONE","coordinates":"[34.391914,0.059575]","url":""},{"name":"Olympus Medical Clinic","uid":"NAbQdHuaJFK","code":"22906","parent":"PeEcMfBchbr","shortname":"Olympus","description":"Clinic","comment":"","featuretype":"NONE","coordinates":"[34.3994,0.059575]","url":""},{"name":"Masaba Community Health Unit","uid":"tYwHeLSnHyb","code":"600616","parent":"QR2K4k8VKF1","shortname":"Masaba CHU","description":"Community Unit","comment":"","featuretype":"NONE","coordinates":"[34.46411,0.19358]","url":""},{"name":"Gatunga Health Centre","uid":"cmay4WXRmhA","code":"12034","parent":"IcAegRcGuV6","shortname":"Gatunga Health Centre","description":"","comment":"","featuretype":"POINT","coordinates":"[37.9423,-0.29656]","url":""},{"name":"Cfw Kimangaru Clinic","uid":"E52UsoBxJVS","code":"11966","parent":"vEAFtHnPDrX","shortname":"CFW Kimangaru Clinic","description":"","comment":"","featuretype":"POINT","coordinates":"[37.53009,-0.54506]","url":""}]
>
>
> What could be the problem here? I get status 200 and still it doesn't
> import.
>
> Any helps will be appreciated.
>
> Thank you
>
>
>
>
>
>
> On Thu, Feb 15, 2018 at 1:41 AM, Aaron C White <aaroncwhite@xxxxxxxxx>
> wrote:
>
>> Oh, and just a side note: the metadata endpoint will respond with a 200
>> always I believe. The response will give you an import summary that
>> describes if it actually accepted the payload or not.
>>
>>
>> --
>> Aaron C. White
>> 919.522.5585
>>
>> On Wed, Feb 14, 2018 at 4:49 PM, Isaiah Nyabuto <isaiahnyabuto@xxxxxxxxx>
>> wrote:
>>
>>> Dear Aaron,
>>>
>>> I am following your guide to on bootstrapping dhis2 with R.
>>>
>>> I am trying to post organisation units metadata to my dhis2 instance. My
>>> payload looks like; "api/metadata?import strategy=FALSE&atomicMode=None"
>>>
>>> I don't seam to get status 201. I get code 200, with no metadata posted.
>>>
>>> What could be wrong ?
>>>
>>> Thank you.
>>>
>>>
>>> ==========================
>>> Isaiah Nyabuto
>>> +254729572616 <+254%20729%20572616>
>>> Bsc. Health Records Management and Informatics
>>>
>>> On Jan 29, 2018 21:01, "Aaron C White" <aaroncwhite@xxxxxxxxx> wrote:
>>>
>>> Isaiah,
>>>
>>> I've found the best way is to convert rows of a CSV into JSON structure
>>> and then post to the appropriate endpoint using httr.
>>>
>>> I've made a slew of helper functions that make it easy for me to do
>>> along with some markdown files starting to explain things. When I started
>>> working with dhis2, I was an analyst and most comfortable using dataframes,
>>> so this kind of fits that perspective. I've learned a lot along the way
>>> and plan to refactor things at some point. Eventually, I'd like to make it
>>> a real R package- just haven't had the time!
>>> https://github.com/aaroncwhite/dhis2R
>>>
>>> Feel free to PM me for more detail/explanation.
>>>
>>> Aaron
>>>
>>>
>>> --
>>> Aaron C. White
>>> 919.522.5585 <(919)%20522-5585>
>>>
>>> On Mon, Jan 29, 2018 at 12:24 PM, Jason Pickering <
>>> jason.p.pickering@xxxxxxxxx> wrote:
>>>
>>>> Hi Isaiah,
>>>>
>>>> Yes, R is definitely capable of creating a file which you can import
>>>> into DHIS2.
>>>>
>>>> If you want to use CSV, be sure to have your file with the "row.names=FALSE
>>>> " parameter and be sure to convert all "NA" values to with " na = '' "
>>>>
>>>> You can also post the file directly to DHIS2. Have a look at
>>>> https://github.com/jason-p-pickering/dhis2-data-munging/b
>>>> lob/master/bootstrap/bootstrap.Rmd or more details of how to do this
>>>> in the section "Loading the data elements"
>>>>
>>>> Regards,
>>>> Jason
>>>>
>>>>
>>>> On Mon, Jan 29, 2018 at 6:04 PM, Timothy Harding <
>>>> tharding@xxxxxxxxxxxxxx> wrote:
>>>>
>>>>> Isaiah:
>>>>>
>>>>> org_kqmh_list_test.csv:
>>>>>
>>>>> Has an extra column
>>>>>
>>>>> [image: Inline image 1]
>>>>>
>>>>> 1, 2, 3, etc.. should not be in there unless the OUs are named 1, 2, 3.
>>>>>
>>>>> Probably should be LF instead of CRLF:
>>>>> [image: Inline image 2]
>>>>> but I'm not sure it makes a difference here.
>>>>>
>>>>> Also you've got a lot of NA's in there, not sure those are needed
>>>>> unless you are setting something to be NA, best just have ,, rather
>>>>> than ,NA,
>>>>>
>>>>> [image: Inline image 3]
>>>>>
>>>>>
>>>>> Good luck!
>>>>>
>>>>>
>>>>> *Timothy Harding*
>>>>> Sr. Systems Analyst, BAO Systems
>>>>> +1 202-536-1541 | tharding@xxxxxxxxxxxxxx | http://www.baosystems.com
>>>>> | Skype: hardingt@xxxxxxxxx | 2900 K Street, Suite 406, Washington
>>>>> D.C. 20007
>>>>> <https://maps.google.com/?q=2900+K+Street,+Suite+406,+Washington+D.C.+20007&entry=gmail&source=g>
>>>>>
>>>>> On Mon, Jan 29, 2018 at 11:30 AM, Isaiah Nyabuto <
>>>>> isaiahnyabuto@xxxxxxxxx> wrote:
>>>>>
>>>>>> Hi all,
>>>>>>
>>>>>> Thanks Timothy for sharing this. I am trying to import organisation
>>>>>> units metadata in csv file with UTF-8 encoding. When I import the file with
>>>>>> Metadata import in dhis2, the file is not imported at all and I do get the
>>>>>> summary report.
>>>>>>
>>>>>> I wrote the csv file with R function write.table.
>>>>>>
>>>>>> Its funny enough that when I write the same file using Excel and save
>>>>>> as csv file with UTF-8, it works well.
>>>>>>
>>>>>> I do not understand what could be the problem here, has anyone tried
>>>>>> to write a csv file with an R function that can successfully be imported in
>>>>>> the dhis2?
>>>>>>
>>>>>> Looking for your help. I have attached my csv files in this email.
>>>>>>
>>>>>> Thanks
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>> ==========================
>>>>>> Isaiah Nyabuto
>>>>>> +254729572616 <+254%20729%20572616>
>>>>>> Bsc. Health Records Management and Informatics
>>>>>>
>>>>>> On Jan 17, 2018 17:51, "Thomas Lavreys" <thomaslavreys@xxxxxxxxx>
>>>>>> wrote:
>>>>>>
>>>>>>> Thanks for the in depth info! It will surely help along the way.
>>>>>>> I’ve only started with some testers, but I will probably run into some more
>>>>>>> issues when I load my real data.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thanks again!!
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Kind regards,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thomas
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *From:* Timothy Harding [mailto:tharding@xxxxxxxxxxxxxx]
>>>>>>> *Sent:* Wednesday, January 17, 2018 3:35 PM
>>>>>>> *To:* Thomas Lavreys <thomaslavreys@xxxxxxxxx>
>>>>>>> *Cc:* Adebusoye Anifalaje <busoye@xxxxxxxxxxxxxx>; dhis2-users <
>>>>>>> dhis2-users@xxxxxxxxxxxxxxxxxxx>
>>>>>>> *Subject:* Re: [Dhis2-users] Data element not found or not
>>>>>>> accessible
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Hello Thomas!
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I am glad you have solved your issue! I noticed a few gotchas so
>>>>>>> here are a couple of things to note when importing csv files in DHIS 2:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> 1. The first row
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> dataelement Data element not found or not accessible
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> [image: Inline image 1]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> is a* funny error*, because it is actually telling you something
>>>>>>> about a single row, found here in the documentation
>>>>>>> <https://docs.dhis2.org/master/en/developer/html/webapi_data_values.html#webapi_data_values_csv>
>>>>>>> :
>>>>>>>
>>>>>>> "dataelement","period","orgunit","catoptcombo","attroptcombo","value","storedby","lastupd","comment"
>>>>>>>
>>>>>>> DHIS 2 is literally complaining about the fact that it *cannot find
>>>>>>> a data element with the uid "dataelement"*, which is what is
>>>>>>> assumes you are trying to load in that top row. You can try yourself by
>>>>>>> loading a file with only this top line, the error will be the same, 1
>>>>>>> ignored row, data element not found or not accessible. It is safe to ignore
>>>>>>> this error, I'd be worried if there was a UID called dataelement, which is
>>>>>>> actually a valid UID! Just extremely unlikely to pop up from the random UID
>>>>>>> generator.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> 2. Ignored
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Unlike the metadata importer, the data importer will report that it
>>>>>>> ignored *every row on a dry run*. It can make testing difficult
>>>>>>> because you don't know if it will actually import correctly or not as it
>>>>>>> reports back that every row was ignored. Two rules of thumb here:
>>>>>>>
>>>>>>> 1. The actual errored out row will be listed in the "Conflicts"
>>>>>>> section, even in a dry run
>>>>>>> 2. Sadly, some errors you can only find on a real run, so always
>>>>>>> upload your files with a comment, so you can find them later via the DB to
>>>>>>> delete them if something goes wrong and all else fails
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> 3. File Type
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> UTF-8 works well and I use it for all my CSV uploads. Be wary of
>>>>>>> EXCEL's CSV saving habits though, especially on a Mac. Your file should be *UTF-8
>>>>>>> without a BOM* (a byte order marker, DHIS 2 doesn't _really_ care,
>>>>>>> as it will error out on row one anyway (see above)) AND it should be
>>>>>>> standard *unix line feeds (LF)*. Excel for the Mac will default to
>>>>>>> saving it with circa 1990's CRs only AND a BOM (unless you are editing a
>>>>>>> CSV, in which case it will keep the settings it found when it opened it).
>>>>>>> Easiest way to check is to grab a copy of Notepad++ (windows) or BBedit
>>>>>>> (mac).
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> BBedit:
>>>>>>>
>>>>>>> [image: Inline image 2]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> and
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> [image: Inline image 3]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Notepad++
>>>>>>>
>>>>>>> [image: Inline image 4]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> and
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> [image: Inline image 5]
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Hope this helps!
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Timothy Harding*
>>>>>>> Sr. Systems Analyst, BAO Systems
>>>>>>>
>>>>>>> +1 202-536-1541 | tharding@xxxxxxxxxxxxxx |
>>>>>>> http://www.baosystems.com | Skype: hardingt@xxxxxxxxx | 2900 K
>>>>>>> Street, Suite 406, Washington D.C. 20007
>>>>>>> <https://maps.google.com/?q=2900+K+Street,+Suite+406,+Washington+D.C.+20007&entry=gmail&source=g>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On Wed, Jan 17, 2018 at 9:11 AM, Thomas Lavreys <
>>>>>>> thomaslavreys@xxxxxxxxx> wrote:
>>>>>>>
>>>>>>> I found the issue. The file was saved as a csv utf-8, which is
>>>>>>> different to a normal csv (aparrently).
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thanks for the advice!
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Kind regards,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thomas
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *From:* Adebusoye Anifalaje [mailto:busoye@xxxxxxxxxxxxxx]
>>>>>>> *Sent:* Wednesday, January 17, 2018 12:31 PM
>>>>>>>
>>>>>>>
>>>>>>> *To:* Thomas Lavreys <thomaslavreys@xxxxxxxxx>
>>>>>>> *Cc:* dhis2-users@xxxxxxxxxxxxxxxxxxx
>>>>>>> *Subject:* Re: [Dhis2-users] Data element not found or not
>>>>>>> accessible
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Hi Thomas,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I aslo see that you are using version 2.23, it is possible that the
>>>>>>> csv column structure is different for this version. There might be someone
>>>>>>> on this forum who is currently working on this version and can provide
>>>>>>> input on that.
>>>>>>>
>>>>>>> - -
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Busoye Anifalaje (PhD)*
>>>>>>> Director of Services (Principal), BAO Systems
>>>>>>>
>>>>>>> UK: +44 7901-740-757 <+44%207901%20740757> | US: +1 682-307-0986
>>>>>>> <(682)%20307-0986>|
>>>>>>>
>>>>>>> busoye@xxxxxxxxxxxxxx | http://www.baosystems.com |
>>>>>>>
>>>>>>> Skype: busoye | 2900 K Street, Suite 406, Washington D.C. 20007
>>>>>>> <https://maps.google.com/?q=2900+K+Street,+Suite+406,+Washington+D.C.+20007&entry=gmail&source=g>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 17 Jan 2018, at 12:23, Thomas Lavreys <thomaslavreys@xxxxxxxxx>
>>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I tried it anyway, and it doesn’t recognize it:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Import summary
>>>>>>>
>>>>>>> Import count
>>>>>>>
>>>>>>> *Type*
>>>>>>>
>>>>>>> *Count*
>>>>>>>
>>>>>>> Imported
>>>>>>>
>>>>>>> 0
>>>>>>>
>>>>>>> Updated
>>>>>>>
>>>>>>> 0
>>>>>>>
>>>>>>> Deleted
>>>>>>>
>>>>>>> 0
>>>>>>>
>>>>>>> Ignored
>>>>>>>
>>>>>>> 13
>>>>>>>
>>>>>>> Conflicts
>>>>>>>
>>>>>>> *Element*
>>>>>>>
>>>>>>> *Description*
>>>>>>>
>>>>>>> dataelement
>>>>>>>
>>>>>>> Data element not found or not accessible
>>>>>>>
>>>>>>> bjDvmb4bfuf
>>>>>>>
>>>>>>> Category option combo not found or not accessible
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> So I’m guessing I need to find the catoptioncombo ID somewhere.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Regards,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thomas
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *From:* Adebusoye Anifalaje [mailto:busoye@xxxxxxxxxxxxxx
>>>>>>> <busoye@xxxxxxxxxxxxxx>]
>>>>>>> *Sent:* Wednesday, January 17, 2018 12:11 PM
>>>>>>> *To:* Thomas Lavreys <thomaslavreys@xxxxxxxxx>
>>>>>>> *Cc:* dhis2-users@xxxxxxxxxxxxxxxxxxx
>>>>>>> *Subject:* Re: [Dhis2-users] Data element not found or not
>>>>>>> accessible
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Hi Thomas,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Can you try specifying the catoptioncombo even if it is default?
>>>>>>> This was an issue with one of the version builds a while ago.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Let’s know if that helps.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Cheers
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> - -
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *<image001.png>*
>>>>>>>
>>>>>>> *Busoye Anifalaje (PhD)*
>>>>>>> Director of Services (Principal), BAO Systems
>>>>>>>
>>>>>>> UK: +44 7901-740-757 <+44%207901%20740757> | US: +1 682-307-0986
>>>>>>> <(682)%20307-0986>|
>>>>>>>
>>>>>>> busoye@xxxxxxxxxxxxxx | http://www.baosystems.com |
>>>>>>>
>>>>>>> Skype: busoye | 2900 K Street, Suite 406, Washington D.C. 20007
>>>>>>> <https://maps.google.com/?q=2900+K+Street,+Suite+406,+Washington+D.C.+20007&entry=gmail&source=g>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> On 17 Jan 2018, at 12:02, Thomas Lavreys <thomaslavreys@xxxxxxxxx>
>>>>>>> wrote:
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Dear,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I get the message “Data element not found or not accessible” when
>>>>>>> trying to import a csv file. I looked at some old threads, but failed to
>>>>>>> find an answer.
>>>>>>>
>>>>>>> The csv file is attached (with headers, but it gave the same answer
>>>>>>> without headers).
>>>>>>>
>>>>>>> Attached also the API page of the data element, the sharing of the
>>>>>>> data element (I have superuser access), and the orgunit page to confirm the
>>>>>>> ID. Also a screenshot of the import summary and my DHIS2 instance info.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> I guess I might be missing something but I can’t figure out what
>>>>>>> exactly.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thank you in advance for your help.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Kind regards,
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Thomas Lavreys
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Thomas Lavreys, MSc, PgC Trop Med*
>>>>>>>
>>>>>>> *Sustainability Department SOCFINCO*
>>>>>>>
>>>>>>> *Maisha Consulting bvba*
>>>>>>>
>>>>>>> *Bisschoppenhof 9*
>>>>>>>
>>>>>>> *3150 Tildonk*
>>>>>>>
>>>>>>> *Belgium*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> *Tel Socfin: +32-25-080050*
>>>>>>>
>>>>>>> *Tel Maisha: +32-16-850242 <+32%2016%2085%2002%2042>*
>>>>>>>
>>>>>>> *Cell phone: +32-474-717641 <+32%20474%2071%2076%2041>*
>>>>>>>
>>>>>>> *Fax: +32-16-850242 <+32%2016%2085%2002%2042>*
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> <TEST.csv><data element id.JPG><sharing data element.JPG><orgunit
>>>>>>> id.JPG><import csv.JPG><instance info.JPG>_____________________
>>>>>>> __________________________
>>>>>>> Mailing list: https://launchpad.net/~dhis2-users
>>>>>>> Post to : dhis2-users@xxxxxxxxxxxxxxxxxxx
>>>>>>> Unsubscribe : https://launchpad.net/~dhis2-users
>>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list: https://launchpad.net/~dhis2-users
>>>>>>> Post to : dhis2-users@xxxxxxxxxxxxxxxxxxx
>>>>>>> Unsubscribe : https://launchpad.net/~dhis2-users
>>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> _______________________________________________
>>>>>>> Mailing list: https://launchpad.net/~dhis2-users
>>>>>>> Post to : dhis2-users@xxxxxxxxxxxxxxxxxxx
>>>>>>> Unsubscribe : https://launchpad.net/~dhis2-users
>>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>>
>>>>>>>
>>>>>
>>>>
>>>>
>>>> --
>>>> Jason P. Pickering
>>>> email: jason.p.pickering@xxxxxxxxx
>>>> tel:+46764147049 <+46%2076%20414%2070%2049>
>>>>
>>>> _______________________________________________
>>>> Mailing list: https://launchpad.net/~dhis2-users
>>>> Post to : dhis2-users@xxxxxxxxxxxxxxxxxxx
>>>> Unsubscribe : https://launchpad.net/~dhis2-users
>>>> More help : https://help.launchpad.net/ListHelp
>>>>
>>>>
>>>
>>> _______________________________________________
>>> Mailing list: https://launchpad.net/~dhis2-users
>>> Post to : dhis2-users@xxxxxxxxxxxxxxxxxxx
>>> Unsubscribe : https://launchpad.net/~dhis2-users
>>> More help : https://help.launchpad.net/ListHelp
>>>
>>>
>>>
>>
>
>
> --
> ------------------------------------------------------------
> --------------------
> Isaiah Nyabuto
> +254 729 572 616
> Bsc. Health Records Management & Informatics, JKUAT.
>
>
>
> --
> ------------------------------------------------------------
> --------------------
> Isaiah Nyabuto
> +254 729 572 616
> Bsc. Health Records Management & Informatics, JKUAT.
>
--
Jason P. Pickering
email: jason.p.pickering@xxxxxxxxx
tel:+46764147049 <076-414%2070%2049>
![PNG image](pngJINg1RZesO.png)
![PNG image](pngwKB2UXvxT7.png)
![PNG image](png0SLYW43IdJ.png)
![PNG image](pngBWk55O52yM.png)
![PNG image](pngLNPEVuFETS.png)
![PNG image](pngxRk5CWexlu.png)
![PNG image](pngFuyP0Q8zgr.png)
![PNG image](png5KLjLWe13j.png)
![PNG image](pngQrl4gsc3zp.png)