dolfin team mailing list archive

[Aron Wahlberg <aron.wahlberg@xxxxxxxxx>]

Hi,

I wonder if anyone has a clue about this problem. I'm sure I've run  
the same thing before and then it worked... I can't see what changed.

This is what I run:

from dolfin import *
mesh = UnitSquare(2, 2)
cell = Cell(mesh, 2)
cell.facetArea(1)

The last command gives me the error attached at the bottom of the  
mail, but cell.volume(), cell.midpoint() and other methods work fine.  
I also get the same/similar for a similar code:

edge = Edge(mesh, 2)
edge.length()

Greatful for any help!

Aron

########### ERROR MESSAGE ##########
 cell.facetArea(1)
[ip2432:04538] *** Process received signal ***
[ip2432:04538] Signal: Bus error (10)
[ip2432:04538] Associated errno: Unknown error: 1019328 (1019328)
[ip2432:04538] Signal code:  (13)
[ip2432:04538] Failing at address: 0x63617274
[ 1] [0xbfffd2f8, 0x00000004] (-P-)
[ 2] (_wrap_Cell_facetArea + 0xa2) [0xbfffd328, 0x04ab0298]
[ 3] (PyObject_Call:F(0,3) + 0x2d) [0xbfffd348, 0x0000a498]
[ 4] (PyEval_EvalFrameEx:F(0,2) + 0x35df) [0xbfffd588, 0x0007947f]
[ 5] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffd638, 0x0007c726]
[ 6] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffd878, 0x00079f30]
[ 7] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffd928, 0x0007c726]
[ 8] (PyEval_EvalFrameEx:F(0,2) + 0x4e03) [0xbfffdb68, 0x0007aca3]
[ 9] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffdc18, 0x0007c726]
[10] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffde58, 0x00079f30]
[11] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffdf08, 0x0007c726]
[12] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffe148, 0x00079f30]
[13] (PyEval_EvalFrameEx:F(0,2) + 0x5446) [0xbfffe388, 0x0007b2e6]
[14] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffe438, 0x0007c726]
[15] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffe678, 0x00079f30]
[16] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffe728, 0x0007c726]
[17] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffe968, 0x00079f30]
[18] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffea18, 0x0007c726]
[19] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffec58, 0x00079f30]
[20] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffed08, 0x0007c726]
[21] (PyEval_EvalFrameEx:F(0,2) + 0x4090) [0xbfffef48, 0x00079f30]
[22] (PyEval_EvalCodeEx:F(0,2) + 0x71b) [0xbfffeff8, 0x0007c726]
[23] (PyEval_EvalCode:F(0,2) + 0x57) [0xbffff038, 0x0007c8da]
[24] (PyRun_FileExFlags:F(0,2) + 0x104) [0xbffff0a8, 0x0009fa6d]
[25] (PyRun_SimpleFileExFlags:F(0,81) + 0x280) [0xbffff138, 0x0009fe07]
[26] (Py_Main:F(0,2) + 0xc05) [0xbffff268, 0x00005896]
[27] (_start + 0xd8) [0xbffff2a8, 0x00002412]
[28] (start + 0x29) [0xbffff2cc, 0x00002339]
[ip2432:04538] *** End of error message ***
Bus error
##########################################################