duplicity-team team mailing list archive

[Kenneth Loafman <kenneth@xxxxxxxxxxx>]

Scott,

If you run "tox -py38" it will automatically build the appropriate version
for testing purposes and test it.  If it has problems building it will
stop.  The shebang line is python3 and is the correct way to do it.  Manual
builds are not needed at all.

...Ken

On Tue, Oct 18, 2022 at 3:39 PM Scott Hannahs <sth@xxxxxxxxxx> wrote:

>
>
> On Oct 18, 2022, at 1:43 PM, Kenneth Loafman <kenneth@xxxxxxxxxxx> wrote:
>
> What do you mean "*They seem unable to load the _rsyncmodule.*"?
> _librsync.*.so maybe?
>
>
> that was just reading the back trace from the failure.  It all got fixed
> when I managed to use a single version of python.  I probably should have
> deleted the comment since it was fixed.  But the line “from . import
> _librsync” was failing.  Which is what led me down the wrong path.  See
> below.
>
>
> ...command:
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/bin/duplicity"
> "full" "/var/folders/6b/85yg9bp94rv55dzbdp78thp40000kr/T/testfiles/dir1" "
> file:///var/folders/6b/85yg9bp94rv55dzbdp78thp40000kr/T/testfiles/output"
> "--volsize" "1" "--skip-volume=1" "-v0" "--no-print-statistics"
> "--allow-source-mismatch"
> "--archive-dir=/var/folders/6b/85yg9bp94rv55dzbdp78thp40000kr/T/testfiles/cache"
> < /dev/null
> ...cwd: /private/var/folders/6b/85yg9bp94rv55dzbdp78thp40000kr/T
> ...output:
> b'Traceback (most recent call last):'
> b'  File
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/bin/duplicity",
> line 37, in <module>'
> b'    from duplicity.dup_main import main'
> b'  File
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/duplicity/dup_main.py",
> line 50, in <module>'
> b'    from duplicity import commandline'
> b'  File
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/duplicity/commandline.py",
> line 43, in <module>'
> b'    from duplicity import backend'
> b'  File
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/duplicity/backend.py",
> line 44, in <module>'
> b'    from duplicity import dup_temp'
> b'  File
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/duplicity/dup_temp.py",
> line 34, in <module>'
> b'    from duplicity import path'
> b'  File
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/duplicity/path.py",
> line 49, in <module>'
> b'    from duplicity import librsync'
> b'  File
> "/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/duplicity/librsync.py",
> line 36, in <module>'
> b'    from . import _librsync'
> b*"ImportError: cannot import name '_librsync' from 'duplicity'
> (/opt/sw/src/fink.build/duplicity-1.0.1-1/duplicity-1.0.1/duplicity/__init__.py)"*
> ...return_val: 1
>
>
> Are you running *tox* to do the testing?
>
> Yes.  I think I ended up building duplicity in python 3.9 and running tox
> in python 3.8.  Thus it could not find the correct libraries?  Now tox
> passed all the tests.  Mostly I needed to change the references from
> python3 to python3.8 in the executable.
>
> -Scott
>
>
>>
>