fenics team mailing list archive

["tomtzigt" <tomtzigt@xxxxxxxxxxxxxxxx>]

SuSE 10 is an x86_64 target. That would explain why all the binary
distributions have a 32bit and a 64bit distribution. Ok, do you or your IT
support staff have an idea if we can fake a 32bit target on SuSE? I have to
believe you can, but I can't find anything on the either the help system or
even google for the moment (tried "running 32bit code on 64bit linux").

Theo

-----Original Message-----
From: fenics-dev-bounces@xxxxxxxxxx [mailto:fenics-dev-bounces@xxxxxxxxxx]
On Behalf Of 'Anders Logg'
Sent: Monday, September 18, 2006 2:06 PM
To: fenics-dev@xxxxxxxxxx; 'Discussion of DOLFIN development'
Subject: Re: [FEniCS-dev] FEniCS 0.1.0-pre2

Is this a 686 Linux machine?

This really looks like a problem you would get if you compile on a
different architecture.

/Anders


On Mon, Sep 18, 2006 at 02:02:56PM -0400, tomtzigt wrote:
> Still the same problem with respect to the format of the binaries. Is
there
> a command line tool that we can use to quantify the .so format on these
> different machines and compiler sets?
> 
> 
> 
> Ignoring the old RedHat box, here is the SuSE log for the new pre2
release:
> 
> tomtzigt@tomtzigt-ws1:~/fenics/fenics-0.1.0-pre2/demo/dolfin/pde/poisson>
> make
> `dolfin-config --compiler` `dolfin-config --cflags` -c main.cpp
> `dolfin-config --linker` -o dolfin-poisson main.o `dolfin-config --cflags`
> `dolfin-config --libs`
> libtool: link: warning: library
> `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libdolfin.la' was moved.
> libtool: link: warning: library
> `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libxml2.la' was moved.
> libtool: link: warning: library
> `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libdolfin.la' was moved.
> libtool: link: warning: library
> `/home/tomtzigt/fenics/fenics-0.1.0-pre2/lib/libxml2.la' was moved.
> /home/tomtzigt/fenics/fenics-0.1.0-pre2/lib//libdolfin.so.0: could not
read
> symbols: File in wrong format
> collect2: ld returned 1 exit status
> make: *** [dolfin-poisson] Error 1
> 
> tomtzigt@tomtzigt-ws1:~/fenics/fenics-0.1.0-pre2/demo/dolfin/pde/poisson>
> gcc --version
> gcc (GCC) 4.0.2 20050901 (prerelease) (SUSE Linux)
> 
> Theo
> 
> -----Original Message-----
> From: fenics-dev-bounces@xxxxxxxxxx [mailto:fenics-dev-bounces@xxxxxxxxxx]
> On Behalf Of Anders Logg
> Sent: Monday, September 18, 2006 12:19 PM
> To: Discussion of FEniCS development; Discussion of DOLFIN development
> Subject: [FEniCS-dev] FEniCS 0.1.0-pre2
> 
> Please try the new package:
> 
>     http://www.fenics.org/pub/software/fenics/v0.1/
> 
> Unpack the file, run ./install and type 'source fenics.setup'.
> 
> Then go to demo/dolfin/pde/poisson and type 'make'.
> 
> If this works, then run the program by './dolfin-poisson' and plot
> the solution with 'python plot.py'.
> 
> This new version has been built with apg++ from autopackage which
> could solve some problems. It has not been double compiled with
> support for old g++ versions so you need a reasonably fresh g++
> install.
> 
> Does it work for anyone?
> 
> /Anders
> 
> md5sum: 66d7b40f9dc8f5ed626019e7bbb4cb04
> _______________________________________________
> FEniCS-dev mailing list
> FEniCS-dev@xxxxxxxxxx
> http://www.fenics.org/mailman/listinfo/fenics-dev
> 
> 
> 
> _______________________________________________
> FEniCS-dev mailing list
> FEniCS-dev@xxxxxxxxxx
> http://www.fenics.org/mailman/listinfo/fenics-dev
_______________________________________________
FEniCS-dev mailing list
FEniCS-dev@xxxxxxxxxx
http://www.fenics.org/mailman/listinfo/fenics-dev