freenx-team team mailing list archive
-
freenx-team team
-
Mailing list archive
-
Message #00441
Re: [Bug 501305] Re: No window borders/decorations (Metacity) show on client machines.
Jeremy, thanks for answering. Here is your requested info (server
side):
--------------------0-------------------
nelson@nelson-desktop:~$ lsb_release -a
No LSB modules are available.
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
-------------------0---------------------
nelson@nelson-desktop:~$ uname -a
Linux nelson-desktop 2.6.31-16-generic #53-Ubuntu SMP Tue Dec 8 04:01:29 UTC
2009 i686 GNU/Linux
-------------------0---------------------
nelson@nelson-desktop:~$ sudo lshw
*-display
description: VGA compatible controller
product: 82945G/GZ Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 02
width: 32 bits
clock: 33MHz
capabilities: msi pm bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:16 memory:fea80000-feafffff ioport:dc00(size=8)
memory:d0000000-dfffffff(prefetchable) memory:fea40000-fea7ffff
-----------------------0--------------------
nelson@nelson-desktop:~$ nxserver --help
NXSERVER - Version 3.2.0-74-SVN OS (GPL, using backend: 3.3.0)
------------------------0-------------------
Using Gnome 2.28.1
Using 32 bit version
PPA repo: http://ppa.launchpad.net/freenx-team/ppa/ubuntu
Upon local login, machine works fine, all window borders and decorations are
present (Metacity). Tested with and without compiz on both server and
clients, with 3 different clients (2 running Karmic Gnome and 1 running
Jaunty Gnome) and nomachines's nxclient 3.4.0-5. Tried different
combinations of the configurations in nxclient connection dialog to no
avail.
If it's of any help, I removed-purged everything associated with freenx and
installed Nomachine's version of nxclient, nxnode and nxserver to compare
results, and get the same problem, so I can presume the fault is not
directly related to freenx. Maybe the problem resides in ssh's
x11Forwarding but I cant see anything wrong with that section of
/etc/ssh/sshd_config:
X11Forwarding yes
X11DisplayOffset 10
PrintMotd no
PrintLastLog yes
TCPKeepAlive yes
...VNC (vino+vinagre) works ok... but slow, as always. SSH console logins,
sftp and mounts with sshfs all are 100% operative. Local network is 10/100
Ethernet, wired.
Can upload screenshot upon request. I'll update the bug report in Launchpad
with this new info as soon as possible.
Thanks again... Nelson
2009/12/31 Jeremy Wilkins <wjeremy@xxxxxxx>
> You failed to identify what distribution you are using and what version
> as well as which ppa you have used for your packages. We need the
> architecture as well are you using the 32bit or 64bit version? You also
> have not specified whether you are using Gnome, KDE or some other
> desktop environment. It sounds to me like your window decorations are
> not installed, but without further information I am just guessing. You
> also have not identified what works on a local login. You also have not
> specified whether you are even using Ubuntu.
>
> Please submit results of:
> uname -a
> nxserver --help
>
> And reply to the above questions.
>
> --
> No window borders/decorations (Metacity) show on client machines.
> https://bugs.launchpad.net/bugs/501305
> You received this bug notification because you are a direct subscriber
> of the bug.
>
--
Linux Registered User Nº 414305
Kubuntu User Nº 2436
--
No window borders/decorations (Metacity) show on client machines.
https://bugs.launchpad.net/bugs/501305
You received this bug notification because you are a member of FreeNX
Team, which is the registrant for FreeNX Server.
Status in FreeNX open source NX Server: New
Bug description:
All clients connect fine to the server with very good speed and display quality, but all remote windows open on the upper left side of the screen or inside the local window without the window borders/decorations. This occurs at all resolutions and color depths, with or without compiz enabled.
References