gma500 team mailing list archive
-
gma500 team
-
Mailing list archive
-
Message #00440
[Bug 832296] Re: [CONF] Sony Corporation Viliv S7
** Description changed:
DMI:
To Be Filled By O.E.M. To Be Filled By O.E.M.
XORG:
Section "ServerLayout"
- Identifier "Default Layout"
- Screen 0 "Screen0" 0 0
+ Identifier "Default Layout"
+ Screen 0 "Screen0" 0 0
EndSection
Section "Screen"
- Identifier "Screen0"
- Device "IntelEMGD"
- Monitor "LVDS"
- DefaultDepth 24
- SubSection "Display"
- Depth 24
- Modes "1024x600_60.00"
- ViewPort 0 0
- EndSubsection
+ Identifier "Screen0"
+ Device "IntelEMGD"
+ Monitor "LVDS"
+ DefaultDepth 24
+ SubSection "Display"
+ Depth 24
+ Modes "1024x600_60.00"
+ ViewPort 0 0
+ EndSubsection
EndSection
Section "Monitor"
- Identifier "LVDS"
- VendorName "Generic"
- ModelName "Generic Panel"
+ Identifier "LVDS"
+ VendorName "Generic"
+ ModelName "Generic Panel"
# 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
- Modeline "1024x600_60.00" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +Vsync
+ Modeline "1024x600_60.00" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +Vsync
EndSection
Section "Device"
- Identifier "IntelEMGD" # pre-defined value
- Driver "emgd"
- VendorName "Intel(R) DEG" # Define a name as you like
- BoardName "Embedded Graphics" # Define a name as you like
- BusID "00:02" # don't edit <- poulsbo specified value
- Screen 0 # don't edit
- VideoRam 32768 # caches as default is 32mb ( 1024 * VALUE [mb])
- Option "PcfVersion" "1816" # our 1.5.2 has ver.1816
- Option "ConfigId" "1" # don't edit <- default config ID
- Option "ALL/1/name" "Default"
- Option "ALL/1/General/PortOrder" "42000"
-
- ###############################################################################
- ######## NOTES : value "42000" -> Primary LVDS & Secondary sDVO
- ###############################################################################
-
- Option "ALL/1/General/DisplayConfig" "1"
-
- ###############################################################################
- ######## NOTES : value "1" -> Single, "2" -> Cloned Dual
- ###############################################################################
-
- Option "ALL/1/General/DisplayDetect" "1"
-
- ###############################################################################
- ######## NOTES : Not a EDID config. so you use "1".
- ###############################################################################
-
- Option "ALL/1/General/Accel" "1"
-
- ###############################################################################
- ######## NOTES : UXA 2D accel flag. usually you set "1".
- ###############################################################################
-
- Option "ALL/1/General/DRI2" "1"
-
- ###############################################################################
- ######## NOTES : Direct Rendering config. don't edit.
- ###############################################################################
-
- Option "ALL/1/General/XVideo" "1"
-
- ###############################################################################
- ######## NOTES : Xv support flag. default is "1" (enable).
- ###############################################################################
-
- Option "ALL/1/General/XVideoBlend" "1"
-
- ###############################################################################
- ######## NOTES : Xv support flag with FB Blend. default is "1" (enable).
- ###############################################################################
-
- Option "ALL/1/General/XVideoMC" "0"
-
- ###############################################################################
- ######## NOTES : Xv support flag with MotionComp. default is "0" (disable).
- ######## CAUTION : Don't set "1".
- ###############################################################################
-
- Option "All/1/General/ShadowFB" "0"
-
- ###############################################################################
- ######## NOTES : ShadowFB support flag. default is "0" (disable)
- ######## CAUTION : If enabled, makes PC really slower.
- ###############################################################################
-
- Option "All/1/General/TearFB" "1"
-
- ###############################################################################
- ######## NOTES : De-tearing FB flag. default is "1" (enable).
- ###############################################################################
-
- Option "All/1/General/FbBlendOvl" "0"
-
- ###############################################################################
- ######## NOTES : FB overlay blendig flag. default is "0" (disable).
- ###############################################################################
-
- Option "All/1/General/VideoKey" "0x00ff0000"
-
- ###############################################################################
- ######## NOTES : useful inder VideoBlend. no need to edit.
- ###############################################################################
-
- Option "All/1/General/SWCursor" "0"
-
- ###############################################################################
- ######## NOTES : Software rendered cursor flag. default is "0" (disable).
- ###############################################################################
-
- Option "All/1/General/QuickBoot" "0"
-
- ###############################################################################
- ######## NOTES : ??? default is "1" (enable).
- ###############################################################################
-
- # Option "All/1/General/CloneHeight" "900"
- # Option "All/1/General/CloneWidth" "1600"
- # Option "All/1/General/CloneRefresh" "60"
-
- ###############################################################################
- ######## NOTES : Cloned display config. set them as you like.
- ###############################################################################
-
- # Option "All/1/General/OverlayGammaCorrectR" "0x00000008"
- # Option "All/1/General/OverlayGammaCorrectG" "0x00000008"
- # Option "All/1/General/OverlayGammaCorrectB" "0x00000008"
-
- ###############################################################################
- ######## NOTES : Xv gamma correction flag. set them as you like.
- ###############################################################################
- # Option "ALL/1/Port/4/General/name" "LVDS"
- # Option "ALL/1/Port/4/General/EdidAvail" "0"
- # Option "ALL/1/Port/4/General/EdidNotAvail" "4"
- # Option "ALL/1/Port/4/General/Rotation" "0"
- # Option "ALL/1/Port/4/General/Edid" "1"
- # Option "ALL/1/Port/4/FpInfo/Height" "600"
- # Option "ALL/1/Port/4/FpInfo/Width" "1024"
- # Option "ALL/1/Port/4/FpInfo/BkltEnable" "1"
- # Option "ALL/1/Port/4/FpInfo/BkltMethod" "1"
- # #Option "ALL/1/Port/4/FpInfo/GpioPinBklt" "1"
- # Option "ALL/1/Port/4/FpInfo/BkltT1" "60"
- # Option "ALL/1/Port/4/FpInfo/BkltT2" "200"
- # Option "ALL/1/Port/4/FpInfo/BkltT3" "200"
- # Option "ALL/1/Port/4/FpInfo/BkltT4" "50"
- # Option "ALL/1/Port/4/FpInfo/BkltT5" "400"
- Option "ALL/1/Port/4/General/name" "LVDS"
- Option "ALL/1/Port/4/General/EdidAvail" "0"
- Option "ALL/1/Port/4/General/EdidNotAvail" "4"
- Option "ALL/1/Port/4/General/Rotation" "0"
- Option "ALL/1/Port/4/General/Edid" "1"
- Option "ALL/1/Port/4/FpInfo/Height" "600"
- Option "ALL/1/Port/4/FpInfo/Width" "1024"
- Option "ALL/1/Port/4/Dtd/1/PixelClock" "48960"
- Option "ALL/1/Port/4/Dtd/1/HorzActive" "1024"
- Option "ALL/1/Port/4/Dtd/1/HorzSync" "37"
- Option "ALL/1/Port/4/Dtd/1/HorzSyncPulse" "168"
- Option "ALL/1/Port/4/Dtd/1/HorzBlank" "288"
- Option "ALL/1/Port/4/Dtd/1/VertActive" "600"
- Option "ALL/1/Port/4/Dtd/1/VertSync" "1"
- Option "ALL/1/Port/4/Dtd/1/VertSyncPulse" "1"
- Option "ALL/1/Port/4/Dtd/1/VertBlank" "22"
- Option "ALL/1/Port/4/Dtd/1/Flags" "0xc000000"
+ Identifier "IntelEMGD" # pre-defined value
+ Driver "emgd"
+ VendorName "Intel(R) DEG" # Define a name as you like
+ BoardName "Embedded Graphics" # Define a name as you like
+ BusID "00:02" # don't edit <- poulsbo specified value
+ Screen 0 # don't edit
+ VideoRam 32768 # caches as default is 32mb ( 1024 * VALUE [mb])
+ Option "PcfVersion" "1816" # our 1.5.2 has ver.1816
+ Option "ConfigId" "1" # don't edit <- default config ID
+ Option "ALL/1/name" "Default"
+ Option "ALL/1/General/PortOrder" "42000"
+ Option "ALL/1/General/DisplayConfig" "1"
+ Option "ALL/1/General/DisplayDetect" "1"
+ Option "ALL/1/General/Accel" "1"
+ Option "ALL/1/General/DRI2" "1"
+ Option "ALL/1/General/XVideo" "1"
+ Option "ALL/1/General/XVideoBlend" "1"
+ Option "ALL/1/General/XVideoMC" "0"
+ Option "All/1/General/ShadowFB" "0"
+ Option "All/1/General/TearFB" "1"
+ Option "All/1/General/FbBlendOvl" "0"
+ Option "All/1/General/VideoKey" "0x00ff0000"
+ Option "All/1/General/SWCursor" "0"
+ Option "All/1/General/QuickBoot" "0"
+ Option "ALL/1/Port/4/General/name" "LVDS"
+ Option "ALL/1/Port/4/General/EdidAvail" "0"
+ Option "ALL/1/Port/4/General/EdidNotAvail" "4"
+ Option "ALL/1/Port/4/General/Rotation" "0"
+ Option "ALL/1/Port/4/General/Edid" "1"
+ Option "ALL/1/Port/4/FpInfo/Height" "600"
+ Option "ALL/1/Port/4/FpInfo/Width" "1024"
+ Option "ALL/1/Port/4/Dtd/1/PixelClock" "48960"
+ Option "ALL/1/Port/4/Dtd/1/HorzActive" "1024"
+ Option "ALL/1/Port/4/Dtd/1/HorzSync" "37"
+ Option "ALL/1/Port/4/Dtd/1/HorzSyncPulse" "168"
+ Option "ALL/1/Port/4/Dtd/1/HorzBlank" "288"
+ Option "ALL/1/Port/4/Dtd/1/VertActive" "600"
+ Option "ALL/1/Port/4/Dtd/1/VertSync" "1"
+ Option "ALL/1/Port/4/Dtd/1/VertSyncPulse" "1"
+ Option "ALL/1/Port/4/Dtd/1/VertBlank" "22"
+ Option "ALL/1/Port/4/Dtd/1/Flags" "0xc000000"
EndSection
-
#Section "Device"
# Identifier "Intel_IEGD-0"
# Driver "emgd"
# VendorName "Intel(R) DEG"
# BoardName "Embedded Graphics"
# BusID "0:2:0"
# Screen 0
# Option "PcfVersion" "1792"
# Option "ConfigId" "1"
# Option "PortDrivers" "lvds"
# Option "ALL/1/name" "lvds-display"
# Option "ALL/1/General/PortOrder" "40000"
# Option "ALL/1/General/DisplayConfig" "1"
# Option "ALL/1/General/DisplayDetect" "1"
# Option "ALL/1/General/VideoRAM" "131072"
# Option "ALL/1/Port/4/General/name" "LVDS"
# Option "ALL/1/Port/4/General/Rotation" "0"
# Option "ALL/1/Port/4/General/Edid" "1"
# Option "ALL/1/Port/4/Attr/70" "0"
#EndSection
-
#Section "Screen"
# Identifier "Screen0"
# Device "Intel_IEGD-0"
# Monitor "LVDS"
# SubSection "Display"
# Depth 24
# Modes "1366x768"
# EndSubSection
#EndSection
-
#Section "Monitor"
# Identifier "LVDS"
# ModelName "LCD Panel 1366x768"
#EndSection
#Section "DRI"
# Mode 0666
#EndSection
#Section "Extensions"
# Option "composite" "enable"
#EndSection
--
You received this bug notification because you are a member of GMA500
Team, which is the registrant for Intel® EMGD driver.
https://bugs.launchpad.net/bugs/832296
Title:
[CONF] Sony Corporation Viliv S7
Status in Intel® Embedded Media and Graphics Driver (Intel® EMGD):
Incomplete
Bug description:
DMI:
To Be Filled By O.E.M. To Be Filled By O.E.M.
XORG:
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
EndSection
Section "Screen"
Identifier "Screen0"
Device "IntelEMGD"
Monitor "LVDS"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x600_60.00"
ViewPort 0 0
EndSubsection
EndSection
Section "Monitor"
Identifier "LVDS"
VendorName "Generic"
ModelName "Generic Panel"
# 1024x600 @ 60.00 Hz (GTF) hsync: 37.32 kHz; pclk: 48.96 MHz
Modeline "1024x600_60.00" 48.96 1024 1064 1168 1312 600 601 604 622 -HSync +Vsync
EndSection
Section "Device"
Identifier "IntelEMGD" # pre-defined value
Driver "emgd"
VendorName "Intel(R) DEG" # Define a name as you like
BoardName "Embedded Graphics" # Define a name as you like
BusID "00:02" # don't edit <- poulsbo specified value
Screen 0 # don't edit
VideoRam 32768 # caches as default is 32mb ( 1024 * VALUE [mb])
Option "PcfVersion" "1816" # our 1.5.2 has ver.1816
Option "ConfigId" "1" # don't edit <- default config ID
Option "ALL/1/name" "Default"
Option "ALL/1/General/PortOrder" "42000"
Option "ALL/1/General/DisplayConfig" "1"
Option "ALL/1/General/DisplayDetect" "1"
Option "ALL/1/General/Accel" "1"
Option "ALL/1/General/DRI2" "1"
Option "ALL/1/General/XVideo" "1"
Option "ALL/1/General/XVideoBlend" "1"
Option "ALL/1/General/XVideoMC" "0"
Option "All/1/General/ShadowFB" "0"
Option "All/1/General/TearFB" "1"
Option "All/1/General/FbBlendOvl" "0"
Option "All/1/General/VideoKey" "0x00ff0000"
Option "All/1/General/SWCursor" "0"
Option "All/1/General/QuickBoot" "0"
Option "ALL/1/Port/4/General/name" "LVDS"
Option "ALL/1/Port/4/General/EdidAvail" "0"
Option "ALL/1/Port/4/General/EdidNotAvail" "4"
Option "ALL/1/Port/4/General/Rotation" "0"
Option "ALL/1/Port/4/General/Edid" "1"
Option "ALL/1/Port/4/FpInfo/Height" "600"
Option "ALL/1/Port/4/FpInfo/Width" "1024"
Option "ALL/1/Port/4/Dtd/1/PixelClock" "48960"
Option "ALL/1/Port/4/Dtd/1/HorzActive" "1024"
Option "ALL/1/Port/4/Dtd/1/HorzSync" "37"
Option "ALL/1/Port/4/Dtd/1/HorzSyncPulse" "168"
Option "ALL/1/Port/4/Dtd/1/HorzBlank" "288"
Option "ALL/1/Port/4/Dtd/1/VertActive" "600"
Option "ALL/1/Port/4/Dtd/1/VertSync" "1"
Option "ALL/1/Port/4/Dtd/1/VertSyncPulse" "1"
Option "ALL/1/Port/4/Dtd/1/VertBlank" "22"
Option "ALL/1/Port/4/Dtd/1/Flags" "0xc000000"
EndSection
#Section "Device"
# Identifier "Intel_IEGD-0"
# Driver "emgd"
# VendorName "Intel(R) DEG"
# BoardName "Embedded Graphics"
# BusID "0:2:0"
# Screen 0
# Option "PcfVersion" "1792"
# Option "ConfigId" "1"
# Option "PortDrivers" "lvds"
# Option "ALL/1/name" "lvds-display"
# Option "ALL/1/General/PortOrder" "40000"
# Option "ALL/1/General/DisplayConfig" "1"
# Option "ALL/1/General/DisplayDetect" "1"
# Option "ALL/1/General/VideoRAM" "131072"
# Option "ALL/1/Port/4/General/name" "LVDS"
# Option "ALL/1/Port/4/General/Rotation" "0"
# Option "ALL/1/Port/4/General/Edid" "1"
# Option "ALL/1/Port/4/Attr/70" "0"
#EndSection
#Section "Screen"
# Identifier "Screen0"
# Device "Intel_IEGD-0"
# Monitor "LVDS"
# SubSection "Display"
# Depth 24
# Modes "1366x768"
# EndSubSection
#EndSection
#Section "Monitor"
# Identifier "LVDS"
# ModelName "LCD Panel 1366x768"
#EndSection
#Section "DRI"
# Mode 0666
#EndSection
#Section "Extensions"
# Option "composite" "enable"
#EndSection
To manage notifications about this bug go to:
https://bugs.launchpad.net/emgd/+bug/832296/+subscriptions
References
