← Back to team overview

group.of.nepali.translators team mailing list archive

  1. group.of.nepali.translators team
  2. Mailing list archive
  3. Message #04274

[Bug 1586048] Re: ipmi sel time set is setting 30 mins less than given time in OOB, and 30 mins more than given time in in-band method (ipmitool)

  Thread Previous • Date Previous • • Thread Next 
This is already fixed in yakkety.

** Changed in: ipmitool (Ubuntu)
       Status: Triaged => Fix Released

** Changed in: ipmitool (Ubuntu Xenial)
       Status: Triaged => In Progress

** Description changed:

+ [Impact]
+ Setting time via ipmi (inband or out of band) between systems that aren't on the same timezone where the timezone is stepped by the minute (as opposed to the typical stepping by hour in many timezones).
+ 
+ [Test Case]
+ See below: '---Steps to Reproduce---'.
+ 
+ [Regression potential]
+ Minimal, this adds comparing the minutes as well as hour for timezone differences. If timezone data was inconsistent or broken where the timezone should be stepped by the hour and actually includes a minute difference; it may be seen that the time value set as a result of the 'ipmitool sel time' commands would differ from the value passed to the command.
+ 
+ ---
+ 
  == Comment: #0 - Mukesh K. Ojha <mukeojha@xxxxxxxxxx> - 2016-05-09 13:50:48 ==
  ---Problem Description---
  ipmi sel time set is setting 30 mins less than given time in OOB, and 30 mins more than given time in in-band method (ipmitool)
-  
+ 
  ---uname output---
  Ubuntu 16.04
-  
- Machine Type = All Power System 
-  
+ 
+ Machine Type = All Power System
+ 
  ---Debugger---
  A debugger is not configured
-  
+ 
  ---Steps to Reproduce---
-   Install a Open Power Firmware(OP810) on BMC machine and try to set sel time using ipmitool.
+   Install a Open Power Firmware(OP810) on BMC machine and try to set sel time using ipmitool.
  
  ipmi sel time set is setting 30 mins less than given time in Out-of-
  band(OOB), and 30 mins more than given time in in-band method.
  
  Here there are two problems
  1. sel time set function setting time incorrectly.
  2. same ipmi command behaves differently in in-band and out-of-band.
  
- 
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.3.23.199 -U ADMIN -P admin sel time get
  03/02/2016 11:43:07
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.3.23.199 -U ADMIN -P admin sel time set "03/02/2016 11:43:07"
  03/02/2016 11:13:07
- [pridhiviraj@localhost sl_ga]$ 
+ [pridhiviraj@localhost sl_ga]$
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.3.23.199 -U ADMIN -P admin sel time get
  03/02/2016 11:15:20
  
  Here we can observe in OOB method sel time set is setting 30 minutes
  less than given time.
  
  This is tried on a machine which is having custom firmware for SL GA2
  testing.
  
  Tried on another machine having OP810 firmware, same problem appears.
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.47.70.200 -U ADMIN -P admin sel time get
  02/20/2014 23:51:35
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.47.70.200 -U ADMIN -P admin sel time set "02/20/2014 23:51:35"
  02/20/2014 23:21:35
- [pridhiviraj@localhost sl_ga]$ 
- 
- 
+ [pridhiviraj@localhost sl_ga]$
  
  Try to set sel time using in-band method:
  [root@ite037 ~]# ipmitool sel time get
  03/02/2016 11:06:55
  [root@ite037 ~]# ipmitool sel time set "03/02/2016 11:06:55"
  03/02/2016 11:36:55
- [root@ite037 ~]# 
- [root@ite037 ~]# 
+ [root@ite037 ~]#
+ [root@ite037 ~]#
  [root@ite037 ~]# ipmitool sel time get
  03/02/2016 11:37:17
- [root@ite037 ~]# 
-  
- Contact Information = hegdevasant@xxxxxxxxxxxxxxxxxx 
-  
- Userspace tool common name: ipmitool 
-  
- The userspace tool has the following bit modes: both 
+ [root@ite037 ~]#
+ 
+ Contact Information = hegdevasant@xxxxxxxxxxxxxxxxxx
+ 
+ Userspace tool common name: ipmitool
+ 
+ The userspace tool has the following bit modes: both
  
  Userspace package: ipmitool
  
- Userspace tool obtained from project website:  na 
-  
+ Userspace tool obtained from project website:  na
+ 
  *Additional Instructions for hegdevasant@xxxxxxxxxxxxxxxxxx:
  -Attach ltrace and strace of userspace application.
  
  == Comment: #7 - Breno Henrique Leitao <brenohl@xxxxxxxxxx> - 2016-05-25 14:55:13 ==
  Canonical,
  
  The solution for this problem is a fix already accepted upstream on
  commit:
  
-  * c7169bc27ee407206e768dece2c3f026e02aee02
+  * c7169bc27ee407206e768dece2c3f026e02aee02
  
  git://git.code.sf.net/p/ipmitool/source

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1586048

Title:
  ipmi sel time set is setting 30 mins less than given time in OOB, and
  30 mins more than given time in in-band method (ipmitool)

Status in ipmitool package in Ubuntu:
  Fix Released
Status in ipmitool source package in Xenial:
  In Progress

Bug description:
  [Impact]
  Setting time via ipmi (inband or out of band) between systems that aren't on the same timezone where the timezone is stepped by the minute (as opposed to the typical stepping by hour in many timezones).

  [Test Case]
  See below: '---Steps to Reproduce---'.

  [Regression potential]
  Minimal, this adds comparing the minutes as well as hour for timezone differences. If timezone data was inconsistent or broken where the timezone should be stepped by the hour and actually includes a minute difference; it may be seen that the time value set as a result of the 'ipmitool sel time' commands would differ from the value passed to the command.

  ---

  == Comment: #0 - Mukesh K. Ojha <mukeojha@xxxxxxxxxx> - 2016-05-09 13:50:48 ==
  ---Problem Description---
  ipmi sel time set is setting 30 mins less than given time in OOB, and 30 mins more than given time in in-band method (ipmitool)

  ---uname output---
  Ubuntu 16.04

  Machine Type = All Power System

  ---Debugger---
  A debugger is not configured

  ---Steps to Reproduce---
    Install a Open Power Firmware(OP810) on BMC machine and try to set sel time using ipmitool.

  ipmi sel time set is setting 30 mins less than given time in Out-of-
  band(OOB), and 30 mins more than given time in in-band method.

  Here there are two problems
  1. sel time set function setting time incorrectly.
  2. same ipmi command behaves differently in in-band and out-of-band.

  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.3.23.199 -U ADMIN -P admin sel time get
  03/02/2016 11:43:07
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.3.23.199 -U ADMIN -P admin sel time set "03/02/2016 11:43:07"
  03/02/2016 11:13:07
  [pridhiviraj@localhost sl_ga]$
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.3.23.199 -U ADMIN -P admin sel time get
  03/02/2016 11:15:20

  Here we can observe in OOB method sel time set is setting 30 minutes
  less than given time.

  This is tried on a machine which is having custom firmware for SL GA2
  testing.

  Tried on another machine having OP810 firmware, same problem appears.
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.47.70.200 -U ADMIN -P admin sel time get
  02/20/2014 23:51:35
  [pridhiviraj@localhost sl_ga]$ ipmitool -I lanplus -H 9.47.70.200 -U ADMIN -P admin sel time set "02/20/2014 23:51:35"
  02/20/2014 23:21:35
  [pridhiviraj@localhost sl_ga]$

  Try to set sel time using in-band method:
  [root@ite037 ~]# ipmitool sel time get
  03/02/2016 11:06:55
  [root@ite037 ~]# ipmitool sel time set "03/02/2016 11:06:55"
  03/02/2016 11:36:55
  [root@ite037 ~]#
  [root@ite037 ~]#
  [root@ite037 ~]# ipmitool sel time get
  03/02/2016 11:37:17
  [root@ite037 ~]#

  Contact Information = hegdevasant@xxxxxxxxxxxxxxxxxx

  Userspace tool common name: ipmitool

  The userspace tool has the following bit modes: both

  Userspace package: ipmitool

  Userspace tool obtained from project website:  na

  *Additional Instructions for hegdevasant@xxxxxxxxxxxxxxxxxx:
  -Attach ltrace and strace of userspace application.

  == Comment: #7 - Breno Henrique Leitao <brenohl@xxxxxxxxxx> - 2016-05-25 14:55:13 ==
  Canonical,

  The solution for this problem is a fix already accepted upstream on
  commit:

   * c7169bc27ee407206e768dece2c3f026e02aee02

  git://git.code.sf.net/p/ipmitool/source

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/ipmitool/+bug/1586048/+subscriptions
  Thread Previous • Date Previous • • Thread Next