group.of.nepali.translators team mailing list archive
-
group.of.nepali.translators team
-
Mailing list archive
-
Message #05690
[Bug 1594847] Re: lsvpd doesn't show correct location code for devices attached to a CAPI card
This bug was fixed in the package linux - 4.4.0-30.49
---------------
linux (4.4.0-30.49) xenial; urgency=low
[ Kamal Mostafa ]
* Release Tracking Bug
- LP: #1597897
* FCP devices are not detected correctly nor deterministically (LP: #1567602)
- scsi_dh_alua: Disable ALUA handling for non-disk devices
- scsi_dh_alua: Use vpd_pg83 information
- scsi_dh_alua: improved logging
- scsi_dh_alua: sanitze sense code handling
- scsi_dh_alua: use standard logging functions
- scsi_dh_alua: return standard SCSI return codes in submit_rtpg
- scsi_dh_alua: fixup description of stpg_endio()
- scsi_dh_alua: use flag for RTPG extended header
- scsi_dh_alua: use unaligned access macros
- scsi_dh_alua: rework alua_check_tpgs() to return the tpgs mode
- scsi_dh_alua: simplify sense code handling
- scsi: Add scsi_vpd_lun_id()
- scsi: Add scsi_vpd_tpg_id()
- scsi_dh_alua: use scsi_vpd_tpg_id()
- scsi_dh_alua: Remove stale variables
- scsi_dh_alua: Pass buffer as function argument
- scsi_dh_alua: separate out alua_stpg()
- scsi_dh_alua: Make stpg synchronous
- scsi_dh_alua: call alua_rtpg() if stpg fails
- scsi_dh_alua: switch to scsi_execute_req_flags()
- scsi_dh_alua: allocate RTPG buffer separately
- scsi_dh_alua: Use separate alua_port_group structure
- scsi_dh_alua: use unique device id
- scsi_dh_alua: simplify alua_initialize()
- revert commit a8e5a2d593cb ("[SCSI] scsi_dh_alua: ALUA handler attach should
succeed while TPG is transitioning")
- scsi_dh_alua: move optimize_stpg evaluation
- scsi_dh_alua: remove 'rel_port' from alua_dh_data structure
- scsi_dh_alua: Use workqueue for RTPG
- scsi_dh_alua: Allow workqueue to run synchronously
- scsi_dh_alua: Add new blacklist flag 'BLIST_SYNC_ALUA'
- scsi_dh_alua: Recheck state on unit attention
- scsi_dh_alua: update all port states
- scsi_dh_alua: Send TEST UNIT READY to poll for transitioning
- scsi_dh_alua: do not fail for unknown VPD identification
linux (4.4.0-29.48) xenial; urgency=low
[ Kamal Mostafa ]
* Release Tracking Bug
- LP: #1597015
* Wireless hotkey fails on Dell XPS 15 9550 (LP: #1589886)
- intel-hid: new hid event driver for hotkeys
- intel-hid: fix incorrect entries in intel_hid_keymap
- intel-hid: allocate correct amount of memory for private struct
- intel-hid: add a workaround to ignore an event after waking up from S4.
- [Config] CONFIG_INTEL_HID_EVENT=m
* cgroupfs mounts can hang (LP: #1588056)
- Revert "UBUNTU: SAUCE: (namespace) mqueue: Super blocks must be owned by the
user ns which owns the ipc ns"
- Revert "UBUNTU: SAUCE: kernfs: Do not match superblock in another user
namespace when mounting"
- Revert "UBUNTU: SAUCE: cgroup: Use a new super block when mounting in a
cgroup namespace"
- (namespace) bpf: Use mount_nodev not mount_ns to mount the bpf filesystem
- (namespace) bpf, inode: disallow userns mounts
- (namespace) ipc: Initialize ipc_namespace->user_ns early.
- (namespace) vfs: Pass data, ns, and ns->userns to mount_ns
- SAUCE: (namespace) Sync with upstream s_user_ns patches
- (namespace) kernfs: The cgroup filesystem also benefits from SB_I_NOEXEC
- (namespace) ipc/mqueue: The mqueue filesystem should never contain
executables
* KVM system crashes after starting guest (LP: #1596635)
- xhci: Cleanup only when releasing primary hcd
* Upstream patch "crypto: vmx - IV size failing on skcipher API" for Ubuntu
16.04 (LP: #1596557)
- crypto: vmx - IV size failing on skcipher API
* [Bug]tpm initialization fails on x86 (LP: #1596469)
- tpm_crb: drop struct resource res from struct crb_priv
- tpm_crb: fix mapping of the buffers
* Device shutdown notification for CAPI Flash cards (LP: #1592114)
- cxlflash: Fix regression issue with re-ordering patch
- cxlflash: Fix to drain operations from previous reset
- cxlflash: Add device dependent flags
- cxlflash: Shutdown notify support for CXL Flash cards
* scsi-modules udeb should include pm80xx (LP: #1595628)
- [Config] Add pm80xx scsi driver to d-i
* Sync up latest relevant upstream bug fixes (LP: #1594871)
- SAUCE: (noup) Update zfs to 0.6.5.6-0ubuntu10
* Cannot compile module tda10071 (LP: #1592531)
- [media] tda10071: Fix dependency to REGMAP_I2C
* lsvpd doesn't show correct location code for devices attached to a CAPI card
(LP: #1594847)
- cxl: Make vPHB device node match adapter's
* enable CRC32 and AES ARM64 by default or as module (LP: #1594455)
- [Config] Enable arm64 AES and CRC32 crypto
* VMX kernel crypto module exhibits poor performance in Ubuntu 16.04
(LP: #1592481)
- crypto: vmx - comply with ABIs that specify vrsave as reserved.
- crypto: vmx - Fix ABI detection
- crypto: vmx - Increase priority of aes-cbc cipher
* build squashfs into xenial kernels by default (LP: #1593134)
- [Config] CONFIG_SQUASHFS=y
* Restore irqfd fast path for PPC (LP: #1592809)
- KVM: PPC: Book3S HV: Re-enable XICS fast path for irqfd-generated interrupts
* Unable to start guests with memballoon default. (LP: #1592042)
- virtio_balloon: fix PFN format for virtio-1
* Key 5 automatically pressed on some Logitech wireless keyboards
(LP: #1579190)
- HID: core: prevent out-of-bound readings
* ZFS: Running ztest repeatedly for long periods of time eventually results in
"zdb: can't open 'ztest': No such file or directory" (LP: #1587686)
- Fix ztest truncated cache file
* STC840.20:Alpine:alp7fp1:Ubuntu 16.04, BlueFin (SAN) EEH 6 times during boot
then disabled SRC BA188002:b0314a_1612.840 (LP: #1587316)
- lpfc: Fix DMA faults observed upon plugging loopback connector
-- Kamal Mostafa <kamal@xxxxxxxxxxxxx> Thu, 30 Jun 2016 12:52:15 -0700
** Changed in: linux (Ubuntu Yakkety)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1594847
Title:
lsvpd doesn't show correct location code for devices attached to a
CAPI card
Status in linux package in Ubuntu:
Fix Released
Status in linux source package in Xenial:
Fix Committed
Status in linux source package in Yakkety:
Fix Released
Bug description:
lsvpd doesn't show the correct location code for a device attached to a CAPI card
---Steps to Reproduce---
boot a system with a Surelock card
lsscsi -g to show the Flash disks attached to the capi card
lsvpd -l sg<N>
Fix is in powerpc maintainer's next tree and will be merged when the 4.8 window opens:
cxl: Make vPHB device node match adapter's
https://git.kernel.org/cgit/linux/kernel/git/powerpc/linux.git/commit/?id=a430739009384ba2c4804f3a42
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1594847/+subscriptions