group.of.nepali.translators team mailing list archive

[Launchpad Bug Tracker <1327412@xxxxxxxxxxxxxxxxxx>]

This bug was fixed in the package klibc - 2.0.4-8ubuntu1.16.04.1

---------------
klibc (2.0.4-8ubuntu1.16.04.1) xenial; urgency=medium

  * debian/patches/broadcast_dhcp_send.patch: yiaddr should always be set to 0
    (INADDR_ANY) when sending those messages we're sending as a DHCP client,
    so DHCPDISCOVER and DHCPREQUEST for now. DHCPDISCOVER already did the
    right thing since 2.0.4-8ubuntu1, this fixes DHCPREQUEST. (LP: #1327412)

 -- Mathieu Trudel-Lapierre <cyphermox@xxxxxxxxxx>  Tue, 26 Apr 2016
12:59:59 -0400

** Changed in: klibc (Ubuntu Xenial)
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1327412

Title:
  Delay during PXE Boot, IP-Config gives up

Status in klibc package in Ubuntu:
  Fix Released
Status in klibc source package in Trusty:
  Fix Released
Status in klibc source package in Wily:
  Won't Fix
Status in klibc source package in Xenial:
  Fix Released
Status in klibc package in Debian:
  New

Bug description:
  [Impact]
  PXE booting users with live images or other minimal setups using klibc-utils.

  [Test case]
  Attempt to PXE boot using Ubuntu live images; see below for details.

  [Regression potential]
  This forces the yiaddr (client requested/current IP) to be set to 0 when sending DHCP messages; currently the messages are DHCPREQUEST and DHCPDISCOVER, which should typically only happen when there is no IP set on the device and it is otherwise unable to receive unicast (on account of not being configured). Should there be a need to send other messages which would require setting the yiaddr value to the current configured IP address, a naive change would break. The yiaddr variable would need to be adjusted to pull value from a new location, or initialized directly by the callers to dhcp_send() where the business logic would reside.

  ---

  Attempting to PXE boot both the 12.04.3 and 14.04 Live images.   PXE
  boot works normally (PXE Menu, select desired image, image begins
  loading), then the boot process hangs while IP-Config attempts to get
  an IP address:

  IP-Config: eth0 hardware address e0:db:55:0c:34:7e mtu 1500 DHCP
  IP-Config: eth1 hardware address e0:db:55:0c:34:80 mtu 1500 DHCP
  IP-Config: no response after 2 secs - giving up
  IP-Config: eth0 hardware address e0:db:55:0c:34:7e mtu 1500 DHCP
  IP-Config: eth1 hardware address e0:db:55:0c:34:80 mtu 1500 DHCP
  IP-Config: no response after 3 secs - giving up

  These lines appear very quickly (5 seconds has NOT elapsed), after
  about a minute, we get this:

  IP-Config: eth0 hardware address e0:db:55:0c:34:7e mtu 1500 DHCP
  IP-Config: eth1 hardware address e0:db:55:0c:34:80 mtu 1500 DHCP
  IP-Config: no response after 4 secs - giving up

  Some time later, this:

  IP-Config: eth0 hardware address e0:db:55:0c:34:7e mtu 1500 DHCP
  IP-Config: eth1 hardware address e0:db:55:0c:34:80 mtu 1500 DHCP
  IP-Config: no response after 6 secs - giving up

  Until finally, this:

  IP-Config: eth0 hardware address e0:db:55:0c:34:7e mtu 1500 DHCP
  IP-Config: eth1 hardware address e0:db:55:0c:34:80 mtu 1500 DHCP
  IP-Config: no response after 9 secs - giving up
  IP-Config: eth0 hardware address e0:db:55:0c:34:7e mtu 1500 DHCP
  IP-Config: eth1 hardware address e0:db:55:0c:34:80 mtu 1500 DHCP
  IP-Config: eth0 guessed broadcast address 172.25.11.31
  IP-Config: eth0 complete (dhcp from 172.25.10.20):
  (snip)

  While watching the DHCP server logs, Ubuntu is either not sending a
  DHCP Discover at times, or is not replying back with a DHCPRequest
  during these sessions, presumably ignoring an response from the DHCP
  server.  From the initial booting of the system via PXE, to when
  Ubuntu finally shows the desktop, almost 12 minutes will have elapsed.

  I am seeing this same behavior on both 12.04.3 and 14.04.  After
  finding a number of similar erros via Google and no real resolution, I
  have opened this bug.

  The system experiencing this issue has multiple ethernet interfaces
  (actual HW, not a VM), some Google found solutions suggest hard coding
  DEVICE=eth0 in /etc/initramfs-tools/initramfs.conf, however this isn't
  acceptable as a system attempting to PXE boot may be using an
  alternate port for the network.

  I have found what looks to be a very similar bug filed for Debian,
  #584583, which also contains a patch for this issue (under Debian).

  I have no problems in PXE booting to various Windows, RedHat, Centos,
  or Fedora OSs.  Ubuntu is the only Live OS that I'm attempting to boot
  at present.

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: ubuntu-release-upgrader-core 1:0.220.2
  ProcVersionSignature: Ubuntu 3.13.0-24.46-generic 3.13.9
  Uname: Linux 3.13.0-24-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3
  Architecture: amd64
  CasperVersion: 1.340
  CrashDB: ubuntu
  CurrentDesktop: Unity
  Date: Fri Jun  6 20:22:09 2014
  LiveMediaBuild: Ubuntu 14.04 LTS "Trusty Tahr" - Release amd64 (20140417)
  PackageArchitecture: all
  ProcEnviron:
   TERM=xterm
   PATH=(custom, no user)
   XDG_RUNTIME_DIR=<set>
   LANG=en_US.UTF-8
   SHELL=/bin/bash
  SourcePackage: ubuntu-release-upgrader
  Symptom: release-upgrade
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/klibc/+bug/1327412/+subscriptions