group.of.nepali.translators team mailing list archive
-
group.of.nepali.translators team
-
Mailing list archive
-
Message #08199
[Bug 1625932] Re: Backlight does not change when adjust it higher than 50% after S3
This bug was fixed in the package linux - 4.4.0-42.62
---------------
linux (4.4.0-42.62) xenial; urgency=low
* Fix GRO recursion overflow for tunneling protocols (LP: #1631287)
- tunnels: Don't apply GRO to multiple layers of encapsulation.
- gro: Allow tunnel stacking in the case of FOU/GUE
* CVE-2016-7039
- SAUCE: net: add recursion limit to GRO
linux (4.4.0-41.61) xenial; urgency=low
[ Kamal Mostafa ]
* Release Tracking Bug
- LP: #1628204
* nvme drive probe failure (LP: #1626894)
- (fix) NVMe: Don't unmap controller registers on reset
linux (4.4.0-40.60) xenial; urgency=low
[ Kamal Mostafa ]
* Release Tracking Bug
- LP: #1627074
* Permission denied in CIFS with kernel 4.4.0-38 (LP: #1626112)
- Fix memory leaks in cifs_do_mount()
- Compare prepaths when comparing superblocks
- SAUCE: Fix regression which breaks DFS mounting
* Backlight does not change when adjust it higher than 50% after S3
(LP: #1625932)
- SAUCE: i915_bpo: drm/i915/backlight: setup and cache pwm alternate
increment value
- SAUCE: i915_bpo: drm/i915/backlight: setup backlight pwm alternate
increment on backlight enable
linux (4.4.0-39.59) xenial; urgency=low
[ Joseph Salisbury ]
* Release Tracking Bug
- LP: #1625303
* thunder: chip errata w/ multiple CQEs for a TSO packet (LP: #1624569)
- net: thunderx: Fix for issues with multiple CQEs posted for a TSO packet
* thunder: faulty TSO padding (LP: #1623627)
- net: thunderx: Fix for HW issue while padding TSO packet
* CVE-2016-6828
- tcp: fix use after free in tcp_xmit_retransmit_queue()
* Sennheiser Officerunner - cannot get freq at ep 0x83 (LP: #1622763)
- SAUCE: (no-up) ALSA: usb-audio: Add quirk for sennheiser officerunner
* Backport E3 Skylake Support in ie31200_edac to Xenial (LP: #1619766)
- EDAC, ie31200_edac: Add Skylake support
* Ubuntu 16.04 - Full EEH Recovery Support for NVMe devices (LP: #1602724)
- SAUCE: nvme: Don't suspend admin queue that wasn't created
* ISST-LTE:pNV: system ben is hung during ST (nvme) (LP: #1620317)
- blk-mq: Allow timeouts to run while queue is freezing
- blk-mq: improve warning for running a queue on the wrong CPU
- blk-mq: don't overwrite rq->mq_ctx
* lsattr 32bit does not work on 64bit kernel (Inappropriate ioctl error)
(LP: #1619918)
- btrfs: bugfix: handle FS_IOC32_{GETFLAGS, SETFLAGS, GETVERSION} in
btrfs_ioctl
* radeon: monitor connected to onboard VGA doesn't work with Xenial
(LP: #1600092)
- drm/radeon/dp: add back special handling for NUTMEG
* initramfs includes qle driver, but not firmware (LP: #1623187)
- qed: add MODULE_FIRMWARE()
* [Hyper-V] Rebase Hyper-V to 4.7.2 (stable) (LP: #1616677)
- hv_netvsc: Implement support for VF drivers on Hyper-V
- hv_netvsc: Fix the list processing for network change event
- Drivers: hv: vmbus: Introduce functions for estimating room in the ring
buffer
- Drivers: hv: vmbus: Use READ_ONCE() to read variables that are volatile
- Drivers: hv: vmbus: Export the vmbus_set_event() API
- lcoking/barriers, arch: Use smp barriers in smp_store_release()
- asm-generic: guard smp_store_release/load_acquire
- x86: reuse asm-generic/barrier.h
- asm-generic: add __smp_xxx wrappers
- x86: define __smp_xxx
- asm-generic: implement virt_xxx memory barriers
- Drivers: hv: vmbus: Move some ring buffer functions to hyperv.h
- Drivers: hv: vmbus: Implement APIs to support "in place" consumption of
vmbus packets
- drivers:hv: Lock access to hyperv_mmio resource tree
- drivers:hv: Make a function to free mmio regions through vmbus
- drivers:hv: Track allocations of children of hv_vmbus in private resource
tree
- drivers:hv: Separate out frame buffer logic when picking MMIO range
- Drivers: hv: vmbus: handle various crash scenarios
- Drivers: hv: balloon: don't crash when memory is added in non-sorted order
- Drivers: hv: balloon: reset host_specified_ha_region
- tools: hv: lsvmbus: add pci pass-through UUID
- hv_netvsc: move start_remove flag to net_device_context
- hv_netvsc: use start_remove flag to protect netvsc_link_change()
- hv_netvsc: untangle the pointer mess
- hv_netvsc: get rid of struct net_device pointer in struct netvsc_device
- hv_netvsc: synchronize netvsc_change_mtu()/netvsc_set_channels() with
netvsc_remove()
- hv_netvsc: set nvdev link after populating chn_table
- hv_netvsc: Fix VF register on vlan devices
- hv_netvsc: remove redundant assignment in netvsc_recv_callback()
- hv_netvsc: introduce {net, hv}_device_to_netvsc_device() helpers
- hv_netvsc: pass struct netvsc_device to rndis_filter_{open, close}()
- hv_netvsc: pass struct net_device to rndis_filter_set_device_mac()
- hv_netvsc: pass struct net_device to rndis_filter_set_offload_params()
- netvsc: get rid of completion timeouts
- PCI: hv: Don't leak buffer in hv_pci_onchannelcallback()
- PCI: hv: Handle all pending messages in hv_pci_onchannelcallback()
- netvsc: Use the new in-place consumption APIs in the rx path
- x86/kernel: Audit and remove any unnecessary uses of module.h
- PCI: hv: Fix interrupt cleanup path
- hv_netvsc: Fix VF register on bonding devices
- hv_netvsc: don't lose VF information
- hv_netvsc: avoid deadlocks between rtnl lock and vf_use_cnt wait
- hv_netvsc: reset vf_inject on VF removal
- hv_netvsc: protect module refcount by checking net_device_ctx->vf_netdev
- hv_netvsc: fix bonding devices check in netvsc_netdev_event()
- Drivers: hv: vmbus: Use the new virt_xx barrier code
- ixgbevf: call ndo_stop() instead of dev_close() when running offline
selftest
- ixgbevf: fix error code path when setting MAC address
- ixgbevf: use bit operations for setting and checking resets
- ixgbevf: Add support for generic Tx checksums
- ixgbe/ixgbevf: Add support for bulk free in Tx cleanup & cleanup boolean
logic
- ixgbevf: refactor ethtool stats handling
- ixgbevf: add support for per-queue ethtool stats
- ixgbevf: make use of BIT() macro to avoid shift of signed values
- ixgbevf: Move API negotiation function into mac_ops
- ixgbevf: Add the device ID's presented while running on Hyper-V
- ixgbevf: Support Windows hosts (Hyper-V)
- ixgbevf: Change the relaxed order settings in VF driver for sparc
- ixgbevf: Use mac_ops instead of trying to identify NIC type
* New device ID for Kabypoint (LP: #1622469)
- mfd: lpss: Add Intel Kaby Lake PCH-H PCI IDs
- SAUCE: i2c: i801: Add support for Kaby Lake PCH-H
* Xenial update to v4.4.21 stable release (LP: #1624037)
- Revert "i40e: fix: do not sleep in netdev_ops"
- fs: Check for invalid i_uid in may_follow_link()
- netfilter: x_tables: check for size overflow
- ext4: validate that metadata blocks do not overlap superblock
- ext4: fix xattr shifting when expanding inodes
- ext4: fix xattr shifting when expanding inodes part 2
- ext4: properly align shifted xattrs when expanding inodes
- ext4: avoid deadlock when expanding inode size
- ext4: avoid modifying checksum fields directly during checksum verification
- block: Fix race triggered by blk_set_queue_dying()
- block: make sure a big bio is split into at most 256 bvecs
- cgroup: reduce read locked section of cgroup_threadgroup_rwsem during fork
- s390/sclp_ctl: fix potential information leak with /dev/sclp
- drm/radeon: fix radeon_move_blit on 32bit systems
- drm: Reject page_flip for !DRIVER_MODESET
- drm/msm: fix use of copy_from_user() while holding spinlock
- ASoC: atmel_ssc_dai: Don't unconditionally reset SSC on stream startup
- xfs: fix superblock inprogress check
- timekeeping: Cap array access in timekeeping_debug
- timekeeping: Avoid taking lock in NMI path with CONFIG_DEBUG_TIMEKEEPING
- lustre: remove unused declaration
- wrappers for ->i_mutex access
- ovl: don't copy up opaqueness
- ovl: remove posix_acl_default from workdir
- ovl: listxattr: use strnlen()
- ovl: fix workdir creation
- ubifs: Fix assertion in layout_in_gaps()
- bcache: RESERVE_PRIO is too small by one when prio_buckets() is a power of
two.
- vhost/scsi: fix reuse of &vq->iov[out] in response
- x86/apic: Do not init irq remapping if ioapic is disabled
- uprobes: Fix the memcg accounting
- crypto: caam - fix IV loading for authenc (giv)decryption
- ALSA: usb-audio: Add sample rate inquiry quirk for B850V3 CP2114
- ALSA: firewire-tascam: accessing to user space outside spinlock
- ALSA: fireworks: accessing to user space outside spinlock
- ALSA: rawmidi: Fix possible deadlock with virmidi registration
- ALSA: hda - Add headset mic quirk for Dell Inspiron 5468
- ALSA: hda - Enable subwoofer on Dell Inspiron 7559
- ALSA: timer: fix NULL pointer dereference in read()/ioctl() race
- ALSA: timer: fix division by zero after SNDRV_TIMER_IOCTL_CONTINUE
- ALSA: timer: fix NULL pointer dereference on memory allocation failure
- scsi: fix upper bounds check of sense key in scsi_sense_key_string()
- metag: Fix atomic_*_return inline asm constraints
- cpufreq: Fix GOV_LIMITS handling for the userspace governor
- hwrng: exynos - Disable runtime PM on probe failure
- regulator: anatop: allow regulator to be in bypass mode
- lib/mpi: mpi_write_sgl(): fix skipping of leading zero limbs
- Linux 4.4.21
* Headset mic detection on some variants of Dell Inspiron 5468 (LP: #1617900)
- ALSA: hda - Add headset mic quirk for Dell Inspiron 5468
* Xenial update to v4.4.20 stable release (LP: #1621113)
- hugetlb: fix nr_pmds accounting with shared page tables
- x86/mm: Disable preemption during CR3 read+write
- uprobes/x86: Fix RIP-relative handling of EVEX-encoded instructions
- tools/testing/nvdimm: fix SIGTERM vs hotplug crash
- SUNRPC: Handle EADDRNOTAVAIL on connection failures
- SUNRPC: allow for upcalls for same uid but different gss service
- powerpc/eeh: eeh_pci_enable(): fix checking of post-request state
- ALSA: usb-audio: Add a sample rate quirk for Creative Live! Cam Socialize HD
(VF0610)
- ALSA: usb-audio: Add quirk for ELP HD USB Camera
- arm64: Define AT_VECTOR_SIZE_ARCH for ARCH_DLINFO
- parisc: Fix order of EREFUSED define in errno.h
- virtio: fix memory leak in virtqueue_add()
- vfio/pci: Fix NULL pointer oops in error interrupt setup handling
- perf intel-pt: Fix occasional decoding errors when tracing system-wide
- libnvdimm, nd_blk: mask off reserved status bits
- ALSA: hda - Manage power well properly for resume
- NVMe: Don't unmap controller registers on reset
- PCI: Support PCIe devices with short cfg_size
- PCI: Add Netronome vendor and device IDs
- PCI: Limit config space size for Netronome NFP6000 family
- PCI: Add Netronome NFP4000 PF device ID
- PCI: Limit config space size for Netronome NFP4000
- mmc: sdhci-acpi: Reduce Baytrail eMMC/SD/SDIO hangs
- ACPI: CPPC: Return error if _CPC is invalid on a CPU
- ACPI / CPPC: Prevent cpc_desc_ptr points to the invalid data
- um: Don't discard .text.exit section
- genirq/msi: Remove unused MSI_FLAG_IDENTITY_MAP
- genirq/msi: Make sure PCI MSIs are activated early
- crypto: caam - fix non-hmac hashes
- crypto: caam - fix echainiv(authenc) encrypt shared descriptor
- crypto: caam - defer aead_set_sh_desc in case of zero authsize
- usb: ehci: change order of register cleanup during shutdown
- usb: misc: usbtest: add fix for driver hang
- usb: dwc3: pci: add Intel Kabylake PCI ID
- usb: dwc3: gadget: increment request->actual once
- usb: hub: Fix unbalanced reference count/memory leak/deadlocks
- USB: hub: fix up early-exit pathway in hub_activate
- USB: hub: change the locking in hub_activate
- usb: renesas_usbhs: clear the BRDYSTS in usbhsg_ep_enable()
- usb: renesas_usbhs: Use dmac only if the pipe type is bulk
- USB: validate wMaxPacketValue entries in endpoint descriptors
- usb: gadget: fsl_qe_udc: off by one in setup_received_handle()
- usb/gadget: fix gadgetfs aio support.
- xhci: always handle "Command Ring Stopped" events
- usb: xhci: Fix panic if disconnect
- xhci: don't dereference a xhci member after removing xhci
- USB: serial: fix memleak in driver-registration error path
- USB: serial: option: add D-Link DWM-156/A3
- USB: serial: option: add support for Telit LE920A4
- USB: serial: ftdi_sio: add device ID for WICED USB UART dev board
- USB: serial: ftdi_sio: add PIDs for Ivium Technologies devices
- iommu/dma: Don't put uninitialised IOVA domains
- iommu/arm-smmu: Fix CMDQ error handling
- iommu/arm-smmu: Don't BUG() if we find aborting STEs with disable_bypass
- pinctrl/amd: Remove the default de-bounce time
- EDAC: Increment correct counter in edac_inc_ue_error()
- s390/dasd: fix hanging device after clear subchannel
- mac80211: fix purging multicast PS buffer queue
- arm64: dts: rockchip: add reset saradc node for rk3368 SoCs
- of: fix reference counting in of_graph_get_endpoint_by_regs
- sched/cputime: Fix NO_HZ_FULL getrusage() monotonicity regression
- sched/nohz: Fix affine unpinned timers mess
- iio: fix sched WARNING "do not call blocking ops when !TASK_RUNNING"
- drm/amdgpu: Change GART offset to 64-bit
- drm/amdgpu: fix amdgpu_move_blit on 32bit systems
- drm/amdgpu: avoid a possible array overflow
- drm/amdgpu: skip TV/CV in display parsing
- drm/amd/amdgpu: sdma resume fail during S4 on CI
- drm/amdgpu: record error code when ring test failed
- drm/i915: fix aliasing_ppgtt leak
- ARC: build: Better way to detect ISA compatible toolchain
- ARC: use correct offset in pt_regs for saving/restoring user mode r25
- ARC: Call trace_hardirqs_on() before enabling irqs
- ARC: Elide redundant setup of DMA callbacks
- aacraid: Check size values after double-fetch from user
- mfd: cros_ec: Add cros_ec_cmd_xfer_status() helper
- i2c: cros-ec-tunnel: Fix usage of cros_ec_cmd_xfer()
- cdc-acm: fix wrong pipe type on rx interrupt xfers
- mpt3sas: Fix resume on WarpDrive flash cards
- megaraid_sas: Fix probing cards without io port
- usb: renesas_usbhs: gadget: fix return value check in
usbhs_mod_gadget_probe()
- gpio: Fix OF build problem on UM
- fs/seq_file: fix out-of-bounds read
- btrfs: waiting on qgroup rescan should not always be interruptible
- btrfs: properly track when rescan worker is running
- Input: tegra-kbc - fix inverted reset logic
- Input: i8042 - break load dependency between atkbd/psmouse and i8042
- Input: i8042 - set up shared ps2_cmd_mutex for AUX ports
- crypto: nx - off by one bug in nx_of_update_msc()
- crypto: qat - fix aes-xts key sizes
- dmaengine: usb-dmac: check CHCR.DE bit in usb_dmac_isr_channel()
- USB: avoid left shift by -1
- usb: chipidea: udc: don't touch DP when controller is in host mode
- USB: fix typo in wMaxPacketSize validation
- USB: serial: mos7720: fix non-atomic allocation in write path
- USB: serial: mos7840: fix non-atomic allocation in write path
- USB: serial: option: add WeTelecom WM-D200
- USB: serial: option: add WeTelecom 0x6802 and 0x6803 products
- staging: comedi: daqboard2000: bug fix board type matching code
- staging: comedi: comedi_test: fix timer race conditions
- staging: comedi: ni_mio_common: fix AO inttrig backwards compatibility
- staging: comedi: ni_mio_common: fix wrong insn_write handler
- ACPI / drivers: fix typo in ACPI_DECLARE_PROBE_ENTRY macro
- ACPI / drivers: replace acpi_probe_lock spinlock with mutex
- ACPI / sysfs: fix error code in get_status()
- ACPI / SRAT: fix SRAT parsing order with both LAPIC and X2APIC present
- ALSA: line6: Remove double line6_pcm_release() after failed acquire.
- ALSA: line6: Give up on the lock while URBs are released.
- ALSA: line6: Fix POD sysfs attributes segfault
- hwmon: (iio_hwmon) fix memory leak in name attribute
- sysfs: correctly handle read offset on PREALLOC attrs
- Linux 4.4.20
* Failed to acknowledge elog: /sys/firmware/opal/elog/0x5018d709/acknowledge
(2:No such file or directory) (LP: #1619552)
- powerpc/powernv : Drop reference added by kset_find_obj()
* backport support for userspace access of DP aux devices (LP: #1619756)
- drm/dp: Add a drm_aux-dev module for reading/writing dpcd registers.
- drm/dp: Allow signals to interrupt drm_aux-dev reads/writes
- [Config] CONFIG_DRM_DP_AUX_CHARDEV=y
* Enable virtual scsi server driver for Power (LP: #1615665)
- SAUCE: Ibmvscsis: Properly deregister target sessions
- SAUCE: Return TCMU-generated sense data to fabric module
- SAUCE: Ibmvscsis: Code cleanup of print statements
- SAUCE: Ibmvscsis: Fixed a bug reported by Dan Carpenter
* ISST-LTE: system dropped into xmon at pcibios_release_device+0x5c/0x80
during running dlpar test on monklp3 (LP: #1618151)
- powerpc/pseries: use pci_host_bridge.release_fn() to kfree(phb)
* Kernel Build Fails for Fuse Module (LP: #1617550)
- SAUCE: (namespace) userns: Export current_in_userns to modules
* boot-time kernel panic introduced in 4.4.0-18, not present in 4.4.0-15
(LP: #1572630)
- blk-mq: Reuse hardware context cpumask for tags
- blk-mq: Use proper cpumask iterator
-- Seth Forshee <seth.forshee@xxxxxxxxxxxxx> Fri, 07 Oct 2016 12:03:55
-0500
** Changed in: linux (Ubuntu Xenial)
Status: Fix Committed => Fix Released
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2016-6828
** CVE added: http://www.cve.mitre.org/cgi-
bin/cvename.cgi?name=2016-7039
--
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1625932
Title:
Backlight does not change when adjust it higher than 50% after S3
Status in HWE Next:
Fix Committed
Status in linux package in Ubuntu:
Fix Committed
Status in linux source package in Xenial:
Fix Released
Bug description:
Backlight does not change when adjust it higher than 50% after S3
Steps:
1. Install ubuntu 16.04 and boot into OS
2. suspend system
3. resume system from S3
4. Try to adjust brightness level
Expected results: Backlight should be changed when adjust it
Actual results: Backlight does not change when adjust it higher than
50% after S3
To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1625932/+subscriptions