← Back to team overview

group.of.nepali.translators team mailing list archive

[Bug 1669672] Re: Upgrade Redpine WLAN/BT driver to ver. 1.2.RC4

 

This bug was fixed in the package linux - 4.4.0-77.98

---------------
linux (4.4.0-77.98) xenial; urgency=low

  * linux: 4.4.0-77.98 -proposed tracker (LP: #1686040)

  * [Hyper-V][SAUCE] pci-hyperv: Use only 16 bit integer for PCI domain
    (LP: #1684971)
    - SAUCE: pci-hyperv: Use only 16 bit integer for PCI domain

  * Upgrade Redpine WLAN/BT driver to ver. 1.2.RC4 (LP: #1669672)
    - SAUCE: sdhci: use PCI ID to identify Dell IoT gateways
    - SAUCE: Redpine: Upgrade to ver. 1.2.RC4
    - [Config] Update CONFIG_VEN_RSI_* configs
    - SAUCE: Redpine: add copyright to kernel packages

  * Fix RX fail issue on Exar USB serial driver after resume from S3/S4
    (LP: #1685133)
    - SAUCE: xr-usb-serial: Update driver for Exar USB serial ports

  * Miscellaneous Ubuntu changes
    - [Config] updating configs to match redpine driver changes

 -- Kleber Sacilotto de Souza <kleber.souza@xxxxxxxxxxxxx>  Tue, 25 Apr
2017 19:32:01 +0200

** Changed in: linux (Ubuntu Xenial)
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1669672

Title:
  Upgrade Redpine WLAN/BT driver to ver. 1.2.RC4

Status in HWE Next:
  New
Status in linux package in Ubuntu:
  Confirmed
Status in linux source package in Xenial:
  Fix Released

Bug description:
  Upgrade the Redpine WLAN/BT RS9113 driver in Ubuntu Xenial kernel to ver. 1.2.RC4.
  Release version: 1.2.RC4

  This is the latest version of the driver provided by Redpine. For now, this driver is enabled only on x86, x86_64 architectures. The impact is restricted to 
  { SDIO_DEVICE(0x041B, 0x9330) } for SDIO based WiFi-BT modules and on USB bus, this driver binds only to RS9113, lets upstream kernel driver handle other RSI chipsets.

  Fixes since previous release(see lp:#1665211)

  Changelog:

  1.2.RC4 -
      WLAN Bug Fixes:
      ---------------
      1) Buffer status interrupt handling improved.
      2) Scan results update in sta+bt dual mode issue resolved

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S5 with WoWLAN does not work.
      2) For GTK rekey, wakeup trigger send to host.

      BT Limitations/Features NOT Supported:
      ----------------------------------------
      1) To connect multiple BT slaves, connection should be initiated
         from rsi module.
      2) In coex mode, BT file transfer fails at times with certain mobiles.

  1.2.RC3 -
      WLAN Bug Fixes:
      ---------------
      1) WoWLAN multiple cycles issue resolved.
      2) Driver Version is correctly updated.
      3) Default operating mode for Caracalla board is corrected.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S5 with WoWLAN does not work.
      2) For GTK rekey, wakeup trigger send to host.

      BT New Features:
      ----------------
      1) Multiple slaves issue in WLAN-BT coex mode resolved.

      BT Limitations/Features NOT Supported:
      --------------------------------------
      1) To connect multiple BT slaves, connection should be initiated
         from rsi module.
      2) In coex mode, BT file transfer fails at times with certain mobiles.

  1.2.RC2 -
      WLAN Bug Fixes:
      ---------------
      1) Suspend/resume issues resolved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S5 with WoWLAN does not work.
      2) For GTK rekey, wakeup trigger send to host.
      3) EAP not tested

      BT Limitations/Features NOT Supported:
      --------------------------------------
      1) To connect multiple BT slaves, connection should be initiated
         from rsi module.
      2) In coex mode, BT file transfer fails at times with certain mobiles.

  1.2.RC1 -
      WLAN New Features:
      ------------------
      1) Restrict functional modes as per device operating mode
      2) Default operating mode for Caracalla board is 13

      WLAN Bug Fixes:
      ---------------
      1) Driver oops issue if more than 4 clients try to connect in
         operating mode 14 resolved.
      2) Issue with connecting more than max clients and disconnection
         issue resolved.
      3) L2 test stop when wlan interface down issue resolved.
      4) Driver version corrected.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S5 with WoWLAN does not work.
      2) For GTK rekey, wakeup trigger send to host.
      3) EAP not tested
      4) For channels 12 and 13 in US region max TX power is coming 0 in
         beacons.

      BT Limitations/Features NOT Supported:
      ----------------------------------------
      1) To connect multiple BT slaves, connection should be initiated
         from rsi module.
      2) In coex mode, BT file transfer fails at times with certain
         mobiles.

  1.1 -
      Generic
      -------
      1) Firmware file name is displayed along with version information.
         at the driver load time.
      2) Device operating mode is made available in the below files:
         /sys/module/rsi_sdio/parameters/dev_oper_mode
         /sys/module/rsi_usb/parameters/dev_oper_mode
      3) Wi-Fi BT radio sharing has been improved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S5 with WoWLAN does not work.
      2) For GTK rekey, wakeup trigger send to host.
      3) EAP not tested
      4) For channels 12 and 13 in US region max TX power is coming 0 in beacons.

      BT Limitations/Features NOT Supported:
      --------------------------------------
      1) To connect multiple BT slaves, connection should be initiated from rsi module.
      2) In coex mode, BT file transfer fails at times with certain mobiles.

  1.0.RC7 -
      Generic
      -------
      1) Driver version, Firmware version and operating mode information is displayed
         at the driver load time.
      2) Driver version is made available in the below files:
         /sys/module/rsi_91x/version
         /sys/module/rsi_sdio/version
         /sys/module/rsi_usb/version

      WLAN Bug Fixes:
      ---------------
      1) Power save latencies resolved

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S5 with WoWLAN does not work.
      2) For GTK rekey, wakeup trigger send to host.
      3) EAP not tested

      BT Limitations/Features NOT Supported:
      --------------------------------------
      1) To connect multiple BT slaves, connection should be initiated from rsi module.
      2) In coex mode, BT file transfer fails at times with certain mobiles.

  1.0 -
      WLAN New Features:
      ------------------
      1) Station mode
      2) All Security modes (WEP/WPA/WPA2)
      3) Station Power save (legacy and UAPSD)
      4) Bgscan and roaming
      5) External antenna selection
      6) Neighbour report request in RRM
      7) Regulatory (802)11d) support
      8) Management frame protection support (802)11w)
      9) Software RF-kill
      10) AP mode
      11) S3, S4 suspend and resume
      12) WoWLAN
      13) AP Power save
      14) Wi-Fi direct

      WLAN Bug Fixes:
      ---------------
      1) Allowed channels 12 and 13 in FCC region.
      2) For the allowed channels 12 and 13 in any region, power configuration
         updated as per Caracalla regulatory rules.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S5 with WoWLAN does not work.
      2) For GTK rekey, wakeup trigger send to host.
      3) EAP not tested

      BT New Features:
      ----------------
      1) BT EDR mode
      2) BT LE mode
      3) BT coex mode (All the coex modes))
      4) Multi-slave mode supported)

      BT Limitations/Features NOT Supported:
      ----------------------------------------
      1) To connect multiple BT slaves, connection should be initiated from rsi module.
      2) In coex mode, BT file transfer fails at times with certain mobiles.

  1.0_RC3 -
      Gerenic:
      --------
      1) Device operating mode is changed as module parameter. Please check
         README or TRM on how to configure this while loading the modules.
      2) Max number of stations supported in Wi-Fi AP alone mode is 32, and AP +
         BT coex mode is 4.
      3) AP + BT-EDR + BLE support added.

      WLAN Bug Fixes:
      ---------------
      1) Bgscan probe request issue resolved.
      2) WoWLAN before association issue resolved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) S4 with and without WoWLAN works with the work-around implemented by Canonical.
      2) S5 with WoWLAN does not work.
      3) For GTK rekey, wakeup trigger send to host.
      4) EAP not tested
      5) To connect multiple BT slaves, connection should be initiated from rsi module.
      6) In coex mode, BT file transfer fails at times with certain mobiles.

      BT New Features:
      ----------------
      1) Multi-slave mode supported.

      BT Bug Fixes:
      -------------
      1) Radio sharing of coex modes improved.

  1.0.RC2 -
      WLAN Bug Fixes:
      ---------------
      1) PVB preparation issue in AP mode resolved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) EAP not supported
      2) Issue while Resume in S4 with or without WoWLAN.
      3) S5 with WoWLAN does not work.
      4) For GTK rekey, wakeup trigger send to host.

      BT Bug Fixes:
      -------------
      1) BT dual mode disconnection issue resolved
      2) AP BT dual mode issue resolved

  1.0_RC1 -
      WLAN Bug Fixes:
      ---------------
      1) WoWLAN in Co-ex mode issue resolved.
      2) AP beacon DTIM count update issue resolved.
      3) Firmware assertion (0x5d) in bgscan issue is resolved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) EAP not supported
      2) Issue while Resume in S4 with or without WoWLAN.
      3) S5 with WoWLAN does not work.
      4) For GTK rekey, wakeup trigger send to host.

  0.9.8.5_RC6 -
      WLAN Bug Fixes:
      ---------------
      1) Firmware CRC check fail issue resolved
      2) Compilation fails on 4.10.1 kernel issue resolved
      3) BG scan issues resolved
      4) AP mode regulatory fixes
      5) WoWLAN issues resolved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) EAP not supported
      2) Issue while Resume in S4 with or without WoWLAN.
      3) S5 with WoWLAN does not work.
      4) For GTK rekey, wakeup trigger send to host.

  0.9.8.5_RC4 -
      WLAN Bug Fixes:
      -------------------
      1) AP mode configuration in channels 12 and 13 for EU region issue resolved.
      2) Data latencies in AP mode issue resolved.
      3) Roaming issues resolved.
      4) AP WEP mode issue resolved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) EAP not supported
      2) Issue while Resume in S4 with or without WoWLAN.
      3) S5 with WoWLAN does not work.
      4) For GTK rekey, wakeup trigger send to host.
      5) WoWLAN does not work in WEP mode.

      Others:
      -------
      1) USB binds only to RS9113, let upstream kernel driver handle other RSI chips

  0.9.8.5_RC3 -
      WLAN Bug Fixes:
      -------------------
      1) Power save issue in station mode (By default UAPSD is enabled on
      Caracalla board) fixed.
      2) WoWLAN with S3 issue resolved

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) EAP not supported
      2) Not verified removing SDIO interrupt polling
      3) S4/S5 sleep states not supported (with and without WoWLAN)

  0.9.8.5_RC2 -
      WLAN Bug Fixes:
      -------------------
      1) Power save issue in station mode (By default UAPSD is enabled on
      Caracalla board) fixed.
      2) Firmware assert 0x71 (while doing bgscan) issue fixed.
      3) Keep alive functionality in station mode issue fixed.
      4) Data traffic stops when connected to multiple stations issue resolved
      5) WoWLAN not working issue is resolved

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) EAP not supported
      2) Not verified removing SDIO interrupt polling
      3) S4/S5 sleep states not supported (with and without WoWLAN)
      4) Wi-Fi direct testing is in progress

  0.9.8.5_RC1 -
      WLAN Bug Fixes:
      -------------------
      1) Observed unicast probe requests during bgscan issue fixed
      2) Firmware assert 0x71 (while doing bgscan) issue fixed.
      3) Crash when doing rmmod while data traffic is going on issue resolved.
      4) Beacons stopped after 5 minutes of data traffic issue fixed.
      5) Keep alive functionality in station mode issue fixed
      6) 11n data rates issue in station mode resolved.

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) EAP not supported
      2) Not verified removing SDIO interrupt polling
      3) S4/S5 sleep states not supported (with.without WoWLAN)
      4) power save is not working consistently
      5) WoWLAN is not working consistently

  0.9.8.3 -
      WLAN New Features:
      -----------------------------------------
      1) AP Mode
      2) S3, S4 suspend and resume
      3) WoWLAN [Testing in progress]

      WLAN Bug Fixes:
      -------------------
      1) First EAPOL drop issue is resolved
      2) Firmware Assert while roaming issue is resolved
         (Provide driver bgsan should be enabled along with supplicant bgscan)
      3) Roaming takes longer time issue is resolved
      4) Added polling support as a work-around for the SDIO interrupt issue
         on some platforms

      WLAN Limitations/Features NOT Supported:
      ----------------------------------------
      1) Wi-Fi Direct mode not supported
      2) EAP not supported
      3) SDIO interrupts are not being delivered to the 9113 driver
      4) In S4 state 9113 device gets reset but device isn't getting re-enumerated.

  This bug is used for tracking purposes, please do not triage.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1669672/+subscriptions