← Back to team overview

group.of.nepali.translators team mailing list archive

[Bug 1657940] Re: eni rendering dhcp6 writes aliases fails to bring up dhcp6

 

This bug is believed to be fixed in cloud-init in 17.1. If this is still
a problem for you, please make a comment and set the state back to New

Thank you.

** Changed in: cloud-init
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1657940

Title:
  eni rendering dhcp6 writes aliases fails to bring up dhcp6

Status in cloud-init:
  Fix Released
Status in cloud-init package in Ubuntu:
  Fix Released
Status in cloud-init source package in Xenial:
  Fix Released
Status in cloud-init source package in Yakkety:
  Fix Released

Bug description:
  === Begin SRU Template ===
  [Impact]
  cloud-init rendered ENI (/etc/network/interfaces) configuration using
  "aliases" (eth0:1).  That fails in some scenarios to bring up all interfaces
  on boot.  

  Most specifically problematic is dhcp with ipv4 and dhcp with ipv6. 
  In that case ipv6 dhcp just would not come up on boot.

  [Test Case]
  There are unit tests to verify that the new network configuration
  is written as expected.  Additionally, this is now using the same
  ENI rendering format that curtin uses, which has good test cases
  in its 'vmtest'.

  
  [Regression Potential]
  Users who had done:
     ifup eth0:1
  will no longer be able to do that. However now this will reliably work:
     ifup eth0
  to bring up all ip addresses on eth0.
  === End SRU Template ===

  Currently, a config like this:
  | version: 1
  | config:
  |    - 'type': 'physical'
  |      'name': 'iface0'
  |      'subnets':
  |        - {'type': 'dhcp4'}
  |        - {'type': 'dhcp6'}

  Will render:
  | auto lo
  | iface lo inet loopback
  |
  | auto iface0
  | iface iface0 inet dhcp
  |     post-up ifup iface0:1
  |
  |
  | auto iface0:1
  | iface iface0:1 inet6 dhcp

  Below is an example test case that shows the output.
  Heres the problem:
  $ sudo sh -c 'ifdown eth0; ifup eth0'
  $ sudo sh -c 'ifdown eth0; ifup eth0'
  Killed old client process
  Internet Systems Consortium DHCP Client 4.3.3
  Copyright 2004-2015 Internet Systems Consortium.
  All rights reserved.
  For info, please visit https://www.isc.org/software/dhcp/

  Listening on LPF/eth0/06:b3:0a:3a:2d:e3
  Sending on   LPF/eth0/06:b3:0a:3a:2d:e3
  Sending on   Socket/fallback
  DHCPRELEASE on eth0 to 172.31.16.1 port 67 (xid=0x32b625f1)
  Internet Systems Consortium DHCP Client 4.3.3
  Copyright 2004-2015 Internet Systems Consortium.
  All rights reserved.
  For info, please visit https://www.isc.org/software/dhcp/

  Listening on LPF/eth0/06:b3:0a:3a:2d:e3
  Sending on   LPF/eth0/06:b3:0a:3a:2d:e3
  Sending on   Socket/fallback
  DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 3 (xid=0xa4d5f301)
  DHCPREQUEST of 172.31.29.161 on eth0 to 255.255.255.255 port 67 (xid=0x1f3d5a4)
  DHCPOFFER of 172.31.29.161 from 172.31.16.1
  DHCPACK of 172.31.29.161 from 172.31.16.1
  bound to 172.31.29.161 -- renewal in 1801 seconds.

  Failed to bring up eth0:1.
  Failed to bring up eth0.

  $ sudo ifup -v eth0:1
  Parsing file /etc/network/interfaces.d/50-cloud-init.cfg
  Parsing file /etc/network/interfaces.d/60-ipv6.cfg
  Configuring interface eth0:1=eth0:1 (inet6)
  /bin/run-parts --exit-on-error --verbose /etc/network/if-pre-up.d
  run-parts: executing /etc/network/if-pre-up.d/ethtool
  run-parts: executing /etc/network/if-pre-up.d/ifenslave
  + [ inet6 = meta ]
  + IF_BOND_SLAVES=
  + [  ]
  + [  ]
  + [ -z  ]
  + exit
  run-parts: executing /etc/network/if-pre-up.d/vlan
  /sbin/modprobe -q net-pf-10 > /dev/null 2>&1 || true # ignore failure.
  /sbin/sysctl -q -e -w net.ipv6.conf.eth0:1.accept_ra=1

  /bin/ip link set dev eth0:1  up
  /lib/ifupdown/wait-for-ll6.sh
  /sbin/dhclient -1 -6 -pf /run/dhclient6.eth0:1.pid -lf /var/lib/dhcp/dhclient6.eth0:1.leases -I -df /var/lib/dhcp/dhclient.eth0:1.leases eth0:1

  --- a/tests/unittests/test_net.py
  +++ b/tests/unittests/test_net.py
  @@ -813,6 +813,27 @@ class TestEniRoundTrip(TestCase):
           self.assertEqual(
               expected, [line for line in found if line])

  +    def test_dhcp4_and_dhcp6(self):
  +        conf = yaml.load(textwrap.dedent("""\
  +            version: 1
  +            config:
  +               - 'type': 'physical'
  +                 'name': 'iface0'
  +                 'subnets':
  +                   - {'type': 'dhcp4'}
  +                   - {'type': 'dhcp6'}
  +               """))
  +
  +        #conf = [
  +        #    {'type': 'physical', 'name': 'iface0',
  +        #     'subnets': [
  +        #         {'type': 'dhcp4'},
  +        #         {'type': 'dhcp6'},
  +        #     ]},
  +        #]
  +        files = self._render_and_read(network_config=conf)
  +        raise Exception(files['/etc/network/interfaces'])
  +

To manage notifications about this bug go to:
https://bugs.launchpad.net/cloud-init/+bug/1657940/+subscriptions