group.of.nepali.translators team mailing list archive
-
group.of.nepali.translators team
-
Mailing list archive
-
Message #16628
[Bug 1677337] Re: Mellanox Technologies MT27500 Family [ConnectX-3] no network connectivity
[Expired for linux (Ubuntu) because there has been no activity for 60
days.]
** Changed in: linux (Ubuntu)
Status: Incomplete => Expired
--
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1677337
Title:
Mellanox Technologies MT27500 Family [ConnectX-3] no network
connectivity
Status in linux package in Ubuntu:
Expired
Status in linux source package in Xenial:
Expired
Status in linux source package in Yakkety:
Won't Fix
Status in linux source package in Zesty:
Expired
Bug description:
After a fresh install of Ubuntu 16.04.2 with 4.4.0-70-generic, the
Mellanox Technologies MT27500 Family [ConnectX-3] card is detected,
brought up and assigned an ip via MAAS. This is where functionality
stops on this kernel. Pinging the MAAS server which is connected
directly(no switch) fails. There's no traffic from tcpdump.
linux-image-generic-hwe-16.04 4.8.0.44.16 fails
mainline kernel 4.10.0-041000-generic fails
mainline kernel 4.11.0-041100rc1-generic resolves the issue.
Both the test server (ppc64le) and MAAS server(amd64) need the
upgraded kernel to work.
=== 4.4.0-70-generic ===
lspci -v
0008:01:00.0 Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3]
Subsystem: IBM MT27500 Family [ConnectX-3]
Flags: bus master, fast devsel, latency 0, IRQ 473
Memory at 3fe200000000 (64-bit, non-prefetchable) [size=1M]
Memory at 240000000000 (64-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at 3fe200100000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mlx4_core
Kernel modules: mlx4_core
ethtool enP8p1s0
Settings for enP8p1s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
40000baseCR4/Full
40000baseSR4/Full
56000baseCR4/Full
56000baseSR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
40000baseCR4/Full
40000baseSR4/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Link partner advertised link modes: 40000baseCR4/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Speed: 40000Mb/s
Duplex: Full
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
dmesg
[ 3.494435] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[ 3.494624] mlx4_core: Initializing 0008:01:00.0
[ 3.494760] mlx4_core 0008:01:00.0: Using 64-bit DMA iommu bypass
[ 8.294713] mlx4_core 0008:01:00.0: PCIe link speed is 8.0GT/s, device supports 8.0GT/s
[ 8.294897] mlx4_core 0008:01:00.0: PCIe link width is x8, device supports x8
[ 8.472682] mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)
[ 8.472907] mlx4_en 0008:01:00.0: Activating port:1
[ 8.481531] mlx4_en: 0008:01:00.0: Port 1: Using 256 TX rings
[ 8.481661] mlx4_en: 0008:01:00.0: Port 1: Using 8 RX rings
[ 8.481694] mlx4_en: 0008:01:00.0: Port 1: frag:0 - size:1522 prefix:0 stride:1536
[ 8.481899] mlx4_en: 0008:01:00.0: Port 1: Initializing port
[ 8.482320] mlx4_en 0008:01:00.0: registered PHC clock
[ 8.485058] mlx4_en 0008:01:00.0: Activating port:2
[ 8.491716] mlx4_en: 0008:01:00.0: Port 2: Using 256 TX rings
[ 8.491760] mlx4_en: 0008:01:00.0: Port 2: Using 8 RX rings
[ 8.491791] mlx4_en: 0008:01:00.0: Port 2: frag:0 - size:1522 prefix:0 stride:1536
[ 8.503650] mlx4_en: 0008:01:00.0: Port 2: Initializing port
[ 8.511021] mlx4_core 0008:01:00.0 enP8p1s0: renamed from eth0
[ 8.530146] mlx4_core 0008:01:00.0 enP8p1s0d1: renamed from eth1
=== 4.11.0-041100rc1-generic ===
lspci -v
0008:01:00.0 Ethernet controller: Mellanox Technologies MT27500 Family [ConnectX-3]
Subsystem: IBM MT27500 Family [ConnectX-3]
Flags: bus master, fast devsel, latency 0, IRQ 473
Memory at 3fe200000000 (64-bit, non-prefetchable) [size=1M]
Memory at 240000000000 (64-bit, prefetchable) [size=128M]
[virtual] Expansion ROM at 3fe200100000 [disabled] [size=1M]
Capabilities: <access denied>
Kernel driver in use: mlx4_core
Kernel modules: mlx4_core
ethtool enP8p1s0
Settings for enP8p1s0:
Supported ports: [ FIBRE ]
Supported link modes: 1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
40000baseCR4/Full
40000baseSR4/Full
56000baseCR4/Full
56000baseSR4/Full
Supported pause frame use: Symmetric Receive-only
Supports auto-negotiation: Yes
Advertised link modes: 1000baseKX/Full
10000baseKX4/Full
10000baseKR/Full
40000baseCR4/Full
40000baseSR4/Full
Advertised pause frame use: Symmetric
Advertised auto-negotiation: Yes
Link partner advertised link modes: 40000baseCR4/Full
Link partner advertised pause frame use: No
Link partner advertised auto-negotiation: Yes
Speed: 40000Mb/s
Duplex: Full
Port: Direct Attach Copper
PHYAD: 0
Transceiver: internal
Auto-negotiation: on
Supports Wake-on: d
Wake-on: d
Current message level: 0x00000014 (20)
link ifdown
Link detected: yes
dmesg
[ 3.934477] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[ 3.934659] mlx4_core: Initializing 0008:01:00.0
[ 8.740796] mlx4_core 0008:01:00.0: PCIe link speed is 8.0GT/s, device supports 8.0GT/s
[ 8.740993] mlx4_core 0008:01:00.0: PCIe link width is x8, device supports x8
[ 8.915288] mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)
[ 8.915626] mlx4_en 0008:01:00.0: Activating port:1
[ 8.924026] mlx4_en: 0008:01:00.0: Port 1: Using 256 TX rings
[ 8.924176] mlx4_en: 0008:01:00.0: Port 1: Using 8 RX rings
[ 8.924230] mlx4_en: 0008:01:00.0: Port 1: frag:0 - size:1522 prefix:0 stride:1536
[ 8.924427] mlx4_en: 0008:01:00.0: Port 1: Initializing port
[ 8.924680] mlx4_en 0008:01:00.0: registered PHC clock
[ 8.926434] mlx4_en 0008:01:00.0: Activating port:2
[ 8.933681] mlx4_en: 0008:01:00.0: Port 2: Using 256 TX rings
[ 8.933787] mlx4_en: 0008:01:00.0: Port 2: Using 8 RX rings
[ 8.933895] mlx4_en: 0008:01:00.0: Port 2: frag:0 - size:1522 prefix:0 stride:1536
[ 8.950476] mlx4_en: 0008:01:00.0: Port 2: Initializing port
[ 8.953686] mlx4_core 0008:01:00.0 enP8p1s0d1: renamed from eth1
[ 8.980067] mlx4_core 0008:01:00.0 enP8p1s0: renamed from eth0
ProblemType: Bug
DistroRelease: Ubuntu 16.04
Package: linux-image-4.4.0-70-generic 4.4.0-70.91
ProcVersionSignature: Ubuntu 4.4.0-70.91-generic 4.4.49
Uname: Linux 4.4.0-70-generic ppc64le
AlsaDevices:
total 0
crw-rw---- 1 root audio 116, 1 Mar 29 17:49 seq
crw-rw---- 1 root audio 116, 33 Mar 29 17:49 timer
AplayDevices: Error: [Errno 2] No such file or directory: 'aplay'
ApportVersion: 2.20.1-0ubuntu2.5
Architecture: ppc64el
ArecordDevices: Error: [Errno 2] No such file or directory: 'arecord'
AudioDevicesInUse: Error: command ['fuser', '-v', '/dev/snd/seq', '/dev/snd/timer'] failed with exit code 1:
Date: Wed Mar 29 17:54:22 2017
IwConfig: Error: [Errno 2] No such file or directory: 'iwconfig'
PciMultimedia:
ProcEnviron:
TERM=xterm
PATH=(custom, no user)
LANG=en_US.UTF-8
SHELL=/bin/bash
ProcFB: 0 astdrmfb
ProcKernelCmdLine: root=UUID=a287c2bd-7e5a-488c-8921-5cf86aed177a ro
ProcLoadAvg: 0.11 0.24 0.15 1/1249 4656
ProcLocks:
1: POSIX ADVISORY WRITE 4054 00:14:799 0 EOF
2: POSIX ADVISORY WRITE 4023 00:14:789 0 EOF
3: POSIX ADVISORY WRITE 1660 00:14:493 0 EOF
4: FLOCK ADVISORY WRITE 4052 00:14:796 0 EOF
5: POSIX ADVISORY WRITE 4126 00:14:807 0 EOF
ProcSwaps:
Filename Type Size Used Priority
/swap.img file 8388544 0 -1
ProcVersion: Linux version 4.4.0-70-generic (buildd@bos01-ppc64el-022) (gcc version 5.4.0 20160609 (Ubuntu/IBM 5.4.0-6ubuntu1~16.04.4) ) #91-Ubuntu SMP Wed Mar 22 12:46:23 UTC 2017
RelatedPackageVersions:
linux-restricted-modules-4.4.0-70-generic N/A
linux-backports-modules-4.4.0-70-generic N/A
linux-firmware 1.157.8
RfKill: Error: [Errno 2] No such file or directory: 'rfkill'
SourcePackage: linux
UpgradeStatus: No upgrade log present (probably fresh install)
cpu_cores: Number of cores present = 20
cpu_coreson: Number of cores online = 20
cpu_dscr: DSCR is 0
cpu_freq:
min: 3.955 GHz (cpu 79)
max: 3.971 GHz (cpu 82)
avg: 3.963 GHz
cpu_runmode:
Could not retrieve current diagnostics mode,
No kernel interface to firmware
cpu_smt: SMT=8
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1677337/+subscriptions
