group.of.nepali.translators team mailing list archive

[Joseph Salisbury <joseph.salisbury@xxxxxxxxxxxxx>]

This issue appears to be an upstream bug, since you tested the latest
upstream kernel. Would it be possible for you to open an upstream bug
report[0]? That will allow the upstream Developers to examine the issue,
and may provide a quicker resolution to the bug.

Please follow the instructions on the wiki page[0]. The first step is to
email the appropriate mailing list. If no response is received, then a
bug may be opened on bugzilla.kernel.org.

Once this bug is reported upstream, please add the tag: 'kernel-bug-
reported-upstream'.

[0] https://wiki.ubuntu.com/Bugs/Upstream/kernel

** Also affects: linux (Ubuntu Bionic)
   Importance: High
       Status: Confirmed

** Changed in: linux (Ubuntu Bionic)
       Status: Confirmed => Triaged

** Changed in: linux (Ubuntu Artful)
       Status: Confirmed => Triaged

** Changed in: linux (Ubuntu Xenial)
       Status: Confirmed => Triaged

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1755268

Title:
  Kernel panic when using KVM and Mellanox OFED driver (bonding and
  sriov enabled)

Status in linux package in Ubuntu:
  Triaged
Status in linux source package in Xenial:
  Triaged
Status in linux source package in Artful:
  Triaged
Status in linux source package in Bionic:
  Triaged

Bug description:
  ##### System information #####

      # uname -a
      Linux m5c37 4.13.0-36-generic #40~16.04.1-Ubuntu SMP Fri Feb 16 23:25:58 UTC 2018 x86_64 x86_64 x86_64 GNU/Linux

      # cat /etc/os-release
      NAME="Ubuntu"
      VERSION="16.04.4 LTS (Xenial Xerus)"
      ID=ubuntu
      ID_LIKE=debian
      PRETTY_NAME="Ubuntu 16.04.4 LTS"
      VERSION_ID="16.04"
      HOME_URL="http://www.ubuntu.com/";
      SUPPORT_URL="http://help.ubuntu.com/";
      BUG_REPORT_URL="http://bugs.launchpad.net/ubuntu/";
      VERSION_CODENAME=xenial
      UBUNTU_CODENAME=xenial

      # ethtool -i eno1
      driver: mlx4_en
      version: 4.3-1.0.1
      firmware-version: 2.42.5004
      expansion-rom-version:
      bus-info: 0000:11:00.0
      supports-statistics: yes
      supports-test: yes
      supports-eeprom-access: no
      supports-register-dump: no
      supports-priv-flags: yes

      # ethtool -i bond0
      driver: bonding
      version: 3.7.1
      firmware-version: 2
      expansion-rom-version:
      bus-info:
      supports-statistics: no
      supports-test: no
      supports-eeprom-access: no
      supports-register-dump: no
      supports-priv-flags: no

      # ethtool -i vmbr0
      driver: bridge
      version: 2.3
      firmware-version: N/A
      expansion-rom-version:
      bus-info: N/A
      supports-statistics: no
      supports-test: no
      supports-eeprom-access: no
      supports-register-dump: no
      supports-priv-flags: no

  Mellanox driver was installed from
  http://content.mellanox.com/ofed/MLNX_OFED-4.3-1.0.1.0/MLNX_OFED_LINUX-4.3-1.0.1.0-ubuntu16.04-x86_64.tgz

      ./mlnxofedinstall --kernel 4.13.0-36-generic --without-dkms --add-
  kernel-support

  ##### Steps for reproduce #####

  This is my /etc/network/interfaces file:

  
      auto lo
      iface lo inet loopback

      auto openibd
      iface openibd inet manual
              pre-up /etc/init.d/openibd start
              pre-down /etc/init.d/openibd force-stop

      auto bond0
      iface bond0 inet manual
              pre-up ip link add bond0 type bond || true
              pre-up ip link set bond0 down
              pre-up ip link set bond0 type bond mode active-backup arp_interval 2000 arp_ip_target 10.36.0.1 arp_validate 3 primary eno1
              pre-up ip link set eno1 down
              pre-up ip link set eno1d1 down
              pre-up ip link set eno1 master bond0
              pre-up ip link set eno1d1 master bond0
              pre-up ip link set bond0 up
              pre-down ip link del bond0

      auto vmbr0
      iface vmbr0 inet static
              address 10.36.128.217
              netmask 255.255.0.0
              gateway 10.36.0.1
              bridge_ports bond0
              bridge_stp off
              bridge_fd 0

  I execute these commands:

      wget http://dl-cdn.alpinelinux.org/alpine/v3.7/releases/x86_64/alpine-virt-3.7.0-x86_64.iso -O alpine.iso
      qemu-system-x86_64 -boot d -cdrom alpine.iso -m 512 -nographic -device e1000,netdev=net0 -netdev tap,id=net0

  And after few moments I have hang kernel, and theese messages in
  console:

      [74390.187908] mlx4_core 0000:11:00.0: bond for multifunction failed
      [74390.486476] mlx4_en: eno1d1: Fail to bond device
      [74390.750758] cache_from_obj: Wrong slab cache. kmalloc-256 but object is from kmalloc-192
      [74391.152326] general protection fault: 0000 [#1] SMP PTI
      [74391.410424] cache_from_obj: Wrong slab cache. kmalloc-256 but object is from kmalloc-192

  kernel trace log in attachment

  ProblemType: Bug
  DistroRelease: Ubuntu 16.04
  Package: linux-image-4.13.0-36-generic 4.13.0-36.40~16.04.1
  ProcVersionSignature: Ubuntu 4.13.0-36.40~16.04.1-generic 4.13.13
  Uname: Linux 4.13.0-36-generic x86_64
  ApportVersion: 2.20.1-0ubuntu2.15
  Architecture: amd64
  Date: Mon Mar 12 19:59:16 2018
  ProcEnviron:
   TERM=xterm-256color
   PATH=(custom, no user)
   LANG=C
   SHELL=/bin/bash
  SourcePackage: linux-hwe
  UpgradeStatus: No upgrade log present (probably fresh install)

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1755268/+subscriptions