group.of.nepali.translators team mailing list archive

[Launchpad Bug Tracker <1657682@xxxxxxxxxxxxxxxxxx>]

This bug was fixed in the package linux-oem - 4.15.0-1006.9

---------------
linux-oem (4.15.0-1006.9) bionic; urgency=medium

  * linux-image-4.15.0-20-generic install after upgrade from xenial breaks
    (LP: #1767133)
    - Packaging: Depends on linux-base that provides the necessary tools

  [ Ubuntu: 4.15.0-22.24 ]

  * CVE-2018-3639 (powerpc)
    - powerpc/64s: Add support for a store forwarding barrier at kernel entry/exit
    - stf-barrier: set eieio instruction bit 6 for future optimisations
  * CVE-2018-3639 (x86)
    - x86/nospec: Simplify alternative_msr_write()
    - x86/bugs: Concentrate bug detection into a separate function
    - x86/bugs: Concentrate bug reporting into a separate function
    - x86/bugs: Read SPEC_CTRL MSR during boot and re-use reserved bits
    - x86/bugs, KVM: Support the combination of guest and host IBRS
    - x86/bugs: Expose /sys/../spec_store_bypass
    - x86/cpufeatures: Add X86_FEATURE_RDS
    - x86/bugs: Provide boot parameters for the spec_store_bypass_disable
      mitigation
    - x86/bugs/intel: Set proper CPU features and setup RDS
    - x86/bugs: Whitelist allowed SPEC_CTRL MSR values
    - x86/bugs/AMD: Add support to disable RDS on Fam[15,16,17]h if requested
    - x86/KVM/VMX: Expose SPEC_CTRL Bit(2) to the guest
    - x86/speculation: Create spec-ctrl.h to avoid include hell
    - prctl: Add speculation control prctls
    - x86/process: Allow runtime control of Speculative Store Bypass
    - x86/speculation: Add prctl for Speculative Store Bypass mitigation
    - nospec: Allow getting/setting on non-current task
    - proc: Provide details on speculation flaw mitigations
    - seccomp: Enable speculation flaw mitigations
    - x86/bugs: Make boot modes __ro_after_init
    - prctl: Add force disable speculation
    - seccomp: Use PR_SPEC_FORCE_DISABLE
    - seccomp: Add filter flag to opt-out of SSB mitigation
    - seccomp: Move speculation migitation control to arch code
    - x86/speculation: Make "seccomp" the default mode for Speculative Store
      Bypass
    - x86/bugs: Rename _RDS to _SSBD
    - proc: Use underscores for SSBD in 'status'
    - Documentation/spec_ctrl: Do some minor cleanups
    - x86/bugs: Fix __ssb_select_mitigation() return type
    - x86/bugs: Make cpu_show_common() static
  * LSM Stacking prctl values should be redefined as to not collide with
    upstream prctls (LP: #1769263) // CVE-2018-3639
    - SAUCE: LSM stacking: adjust prctl values

linux-oem (4.15.0-1005.8) bionic; urgency=medium

  * linux-oem: 4.15.0-1005.8 -proposed tracker (LP: #1767398)
    - source built with a clean tree

  * [i915 CNL-Y] system hangs soon after bootup (LP: #1769843)
    - SAUCE: drm/i915/execlists: Use rmb() to order CSB reads

  * hts221 sensor stops working after resume from S3/S4 (LP: #1769658)
    - SAUCE: iio: humidity: hts221: Fix sensor reads after resume

  * Support Intel Atom (Baytrail-I) HS-UART serdev slaves over tty
    (LP: #1769610)
    - serdev: ttyport: release tty lock sooner on open
    - serdev: ttyport: ignore carrier detect to avoid hangups
    - serdev: ttyport: do not used keyed wakeup in write_wakeup
    - serdev: Make .remove in struct serdev_device_driver optional
    - serdev: Introduce devm_serdev_device_open()
    - serdev: do not generate modaliases for controllers
    - serdev: only match serdev devices
    - serdev: add method to set parity
    - SAUCE: (no-up) Support HS-UART serdev slaves over tty
    - [Config] CONFIG_HSUART_SERIAL_DEVICE=y

  * Support latest Redpine WLAN/BT RS9113 driver (LP: #1657682)
    - SAUCE: rsi: add rx control block to handle rx packets in USB
    - SAUCE: rsi: add bluetooth rx endpoint
    - SAUCE: rsi: add header file rsi_91x
    - SAUCE: rsi: add coex support
    - SAUCE: Bluetooth: bt: rsi: add new rsi bluetooth driver
    - SAUCE: rsi: handle BT traffic in driver
    - SAUCE: rsi: add module parameter operating mode
    - SAUCE: rsi: sdio changes to support BT
    - SAUCE: rsi: improve RX handling in SDIO interface
    - SAUCE: rsi: use dynamic RX control blocks instead of MAX_RX_URB
    - SAUCE: rsi: improve RX packet handling in USB interface
    - SAUCE: rsi: add support for hardware scan offload
    - SAUCE: rsi: move xtend_desc structure from rsi_main.h to rsi_mgmt.h
    - SAUCE: rsi: move descriptor preparation to core
    - SAUCE: rsi: enable 80MHz clock by default
    - SAUCE: rsi: roaming enhancements
    - SAUCE: rsi: add module parameter rsi_reg
    - SAUCE: rsi: regulatory modifications for 'dlcar' mode
    - SAUCE: rsi: device disconnect changes
    - SAUCE: rsi: tx improvements
    - SAUCE: rsi: drop RX broadcast/multicast packets with invalid PN
    - SAUCE: rsi: fix for incorrect data pointer alignment in 64-bit
    - SAUCE: rsi: Remove stack VLA usage
    - SAUCE: rsi: fix nommu_map_sg overflow kernel panic
    - SAUCE: rsi: Fix 'invalid vdd' warning in mmc
    - SAUCE: Redpine: Fix wowlan issue with S4
    - SAUCE: Redpine: rsi: Add deep sleep enable before connection
    - SAUCE: Redpine: resolve power save issue after S4 resume
    - SAUCE: Redpine: rsi: resolve wifi scan stop issue in stress tests
    - SAUCE: rsi: Firmware assert
    - SAUCE: Added fix for connection issue observed with nmcli command.
    - SAUCE: Added fix for hang issue observed during hibernate resume.
    - SAUCE: Added fix for issue power off when connected to AP through nmcli.
    - SAUCE: rsi: improve cancel_hw_scan handling to fix kernel panic
    - [Config]: CONFIG_BT_HCIRSI=m

  * Support latest Redpine WLAN/BT RS9113 driver (LP: #1657682) // INVALID or
    PRIVATE BUG (LP: #1736097) // INVALID or PRIVATE BUG (LP: #1738169)
    - SAUCE: Redpine: fix wowlan issue
    - SAUCE: Redpine: fix reset card issue
    - SAUCE: Redpine: fix for wowlan wakeup failure

  * Support latest Redpine WLAN/BT RS9113 driver (LP: #1657682) // ubuntu/rsi
    driver downlink wifi throughput drops to 5-6 Mbps when BT keyboard is
    connected (LP: #1706991)
    - SAUCE: Redpine: uapsd configuration changes

  * Miscellaneous Ubuntu changes
    - Rebase to 4.15.0-21.22
    - [Config] update configs following rebase to 4.15.0-21.22

  [ Ubuntu: 4.15.0-21.22 ]

  * linux: 4.15.0-21.22 -proposed tracker (LP: #1767397)
  * initramfs-tools exception during pm.DoInstall with  do-release-upgrade from
    16.04 to 18.04  (LP: #1766727)
    - Add linux-image-* Breaks on s390-tools (<< 2.3.0-0ubuntu3)
  * linux-image-4.15.0-20-generic install after upgrade from xenial breaks
    (LP: #1767133)
    - Packaging: Depends on linux-base that provides the necessary tools
  * linux-image packages need to Breaks flash-kernel << 3.90ubuntu2
    (LP: #1766629)
    - linux-image-* breaks on flash-kernel (<< 3.90ubuntu2)

 -- Stefan Bader <stefan.bader@xxxxxxxxxxxxx>  Thu, 17 May 2018 12:05:57
+0200

** Changed in: linux-oem (Ubuntu Bionic)
       Status: New => Fix Released

** CVE added: https://cve.mitre.org/cgi-bin/cvename.cgi?name=2018-3639

** Changed in: linux-oem (Ubuntu Bionic)
       Status: New => Fix Released

-- 
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1657682

Title:
  Support latest Redpine WLAN/BT RS9113 driver

Status in HWE Next:
  Fix Released
Status in linux package in Ubuntu:
  Fix Released
Status in linux-oem package in Ubuntu:
  Confirmed
Status in linux source package in Xenial:
  Fix Released
Status in linux-oem source package in Xenial:
  Invalid
Status in linux source package in Bionic:
  New
Status in linux-oem source package in Bionic:
  Fix Released

Bug description:
  Support latest Redpine WLAN/BT RS9113 driver in Ubuntu Xenial kernel.

  This is the latest version of the driver provided by Redpine. For now,
  this driver is enabled only on x86, x86_64 architectures. The impact
  is also restricted to { SDIO_DEVICE(0x041B, 0x9330) } chipsets.

  For linux-oem (4.15) bionic series:
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
  To support RS9113 Wifi+BT chip on Dell Edge 300x IoT Gateways. Most of the
  patches are already upstream (either Accepted or under review) and being
  tracked here:
  https://patchwork.kernel.org/project/linux-wireless/list/?state=*&q=rsi%3A

  SAUCE patches have been tested by Canonical CE-QA (based on
  Ubuntu-4.15.0-16.17) and HWE is working with the Redpine to get them
  upstreamed to linux-wireless. For now, to meet the project schedule, we'll
  have to carry them in linux-oem.

  The impact is limited to the Redpine RS9113 Wifi+BT with following VID/PID
  { SDIO_DEVICE(0x041B, 0x9330) }.

  This bug is used for tracking purposes, please do not triage.

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1657682/+subscriptions