group.of.nepali.translators team mailing list archive
-
group.of.nepali.translators team
-
Mailing list archive
-
Message #25228
[Bug 1781413] Re: Cannot set MTU higher than 1500 in Xen instance
This bug was fixed in the package linux - 4.15.0-29.31
---------------
linux (4.15.0-29.31) bionic; urgency=medium
* linux: 4.15.0-29.31 -proposed tracker (LP: #1782173)
* [SRU Bionic][Cosmic] kernel panic in ipmi_ssif at msg_done_handler
(LP: #1777716)
- ipmi_ssif: Fix kernel panic at msg_done_handler
* Update to ocxl driver for 18.04.1 (LP: #1775786)
- misc: ocxl: use put_device() instead of device_unregister()
- powerpc: Add TIDR CPU feature for POWER9
- powerpc: Use TIDR CPU feature to control TIDR allocation
- powerpc: use task_pid_nr() for TID allocation
- ocxl: Rename pnv_ocxl_spa_remove_pe to clarify it's action
- ocxl: Expose the thread_id needed for wait on POWER9
- ocxl: Add an IOCTL so userspace knows what OCXL features are available
- ocxl: Document new OCXL IOCTLs
- ocxl: Fix missing unlock on error in afu_ioctl_enable_p9_wait()
* Critical upstream bugfix missing in Ubuntu 18.04 - frequent Xorg crash after
suspend (LP: #1776887)
- ocxl: Document the OCXL_IOCTL_GET_METADATA IOCTL
* Hard LOCKUP observed on stressing Ubuntu 18 04 (LP: #1777194)
- powerpc: use NMI IPI for smp_send_stop
- powerpc: Fix smp_send_stop NMI IPI handling
* IPL: ppc64_cpu --frequency hang with INFO: rcu_sched detected stalls on
CPUs/tasks on w34 and wsbmc016 with 920.1714.20170330n (LP: #1773964)
- rtc: opal: Fix OPAL RTC driver OPAL_BUSY loops
* [Regression] EXT4-fs error (device sda2): ext4_validate_block_bitmap:383:
comm stress-ng: bg 4705: bad block bitmap checksum (LP: #1781709)
- SAUCE: Revert "UBUNTU: SAUCE: ext4: fix ext4_validate_inode_bitmap: comm
stress-ng: Corrupt inode bitmap"
- SAUCE: ext4: check for allocation block validity with block group locked
linux (4.15.0-28.30) bionic; urgency=medium
* linux: 4.15.0-28.30 -proposed tracker (LP: #1781433)
* Cannot set MTU higher than 1500 in Xen instance (LP: #1781413)
- xen-netfront: Fix mismatched rtnl_unlock
- xen-netfront: Update features after registering netdev
linux (4.15.0-27.29) bionic; urgency=medium
* linux: 4.15.0-27.29 -proposed tracker (LP: #1781062)
* [Regression] EXT4-fs error (device sda1): ext4_validate_inode_bitmap:99:
comm stress-ng: Corrupt inode bitmap (LP: #1780137)
- SAUCE: ext4: fix ext4_validate_inode_bitmap: comm stress-ng: Corrupt inode
bitmap
linux (4.15.0-26.28) bionic; urgency=medium
* linux: 4.15.0-26.28 -proposed tracker (LP: #1780112)
* failure to boot with linux-image-4.15.0-24-generic (LP: #1779827) // Cloud-
init causes potentially huge boot delays with 4.15 kernels (LP: #1780062)
- random: Make getrandom() ready earlier
linux (4.15.0-25.27) bionic; urgency=medium
* linux: 4.15.0-25.27 -proposed tracker (LP: #1779354)
* hisi_sas_v3_hw: internal task abort: timeout and not done. (LP: #1777736)
- scsi: hisi_sas: Update a couple of register settings for v3 hw
* hisi_sas: Add missing PHY spinlock init (LP: #1777734)
- scsi: hisi_sas: Add missing PHY spinlock init
* hisi_sas: improve read performance by pre-allocating slot DMA buffers
(LP: #1777727)
- scsi: hisi_sas: use dma_zalloc_coherent()
- scsi: hisi_sas: Use dmam_alloc_coherent()
- scsi: hisi_sas: Pre-allocate slot DMA buffers
* hisi_sas: Failures during host reset (LP: #1777696)
- scsi: hisi_sas: Only process broadcast change in phy_bcast_v3_hw()
- scsi: hisi_sas: Fix the conflict between dev gone and host reset
- scsi: hisi_sas: Adjust task reject period during host reset
- scsi: hisi_sas: Add a flag to filter PHY events during reset
- scsi: hisi_sas: Release all remaining resources in clear nexus ha
* Fake SAS addresses for SATA disks on HiSilicon D05 are non-unique
(LP: #1776750)
- scsi: hisi_sas: make SAS address of SATA disks unique
* Vcs-Git header on bionic linux source package points to zesty git tree
(LP: #1766055)
- [Packaging]: Update Vcs-Git
* large KVM instances run out of IRQ routes (LP: #1778261)
- SAUCE: kvm -- increase KVM_MAX_IRQ_ROUTES to 2048 on x86
-- Stefan Bader <stefan.bader@xxxxxxxxxxxxx> Tue, 17 Jul 2018 10:57:50
+0200
** Changed in: linux (Ubuntu)
Status: Incomplete => Fix Released
--
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1781413
Title:
Cannot set MTU higher than 1500 in Xen instance
Status in linux package in Ubuntu:
Fix Released
Status in linux source package in Xenial:
Fix Released
Status in linux source package in Bionic:
Fix Released
Bug description:
[Impact]
The latest Xenial update has broken MTU functionality in Xen: specifically,
setting MTUs larger than 1500 fails. This prevents Jumbo Frames and other
features which require larger than 1500 byte MTUs from being used. This can
lead to a failure to sync/connect to other components in the cluster/cloud
which expect higher MTUs and result in unavailable services.
This can be worked around by manually using ethtool to set SCATTER/GATHER
functionality:
- $ sudo ethtool -K $interface_name sg on
The issue is caused by the following commit to the xen-netfront driver:
"xen-netfront: Fix race between device setup and open"
commit f599c64fdf7d9c108e8717fb04bc41c680120da4
Introduced: v4.16-rc1
Reverting the above fix has confirmed that the problem goes away.
The following commits fix this issue in the mainline kernel:
"xen-netfront: Fix mismatched rtnl_unlock"
commit cb257783c2927b73614b20f915a91ff78aa6f3e8
Introduced: v4.18-rc3
"xen-netfront: Update features after registering netdev"
commit 45c8184c1bed1ca8a7f02918552063a00b909bf5
Introduced: v4.18-rc3
[Test Case]
1. Launch a Xen instance using the latest kernel version (e.g. 4.4.0-130,
or 4.4.0-1062-aws)
2. Change MTU to 9000 or other value > 1500.
[Regression Potential]
The kernel patch might not be able to set MTU.
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1781413/+subscriptions