group.of.nepali.translators team mailing list archive
-
group.of.nepali.translators team
-
Mailing list archive
-
Message #30097
[Bug 1828258] Re: ldirectord systemd service fails if no /var/lock/subsys dir
** Description changed:
[impact]
ldirectord's systemd service script contains commands to touch and
remove a file in the /var/lock/subsys directory; however, locks there
are a SysV service serialization thing, and are unneeded with systemd.
It's unclear why the ldirectord systemd service script contains the
lines, but they come from upstream so we should get it fixed there and
then correct debian and ubuntu.
this impacts users because if no /var/lock/subsys directory exists, the
systemd service will fail to start, which can impact installing or
upgrading the resource-agents package.
[test case]
remove the /var/lock/subsys directory and try to install or upgrade
- ldirectord
+ ldirectord:
+
+ ubuntu@lp1828258:~$ sudo rmdir /var/lock/subsys
+ ubuntu@lp1828258:~$ sudo apt install ldirectord
+ Reading package lists... Done
+ Building dependency tree
+ Reading state information... Done
+ The following package was automatically installed and is no longer required:
+ libfreetype6
+ Use 'sudo apt autoremove' to remove it.
+ The following NEW packages will be installed:
+ ldirectord
+ 0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
+ Need to get 0 B/62.1 kB of archives.
+ After this operation, 233 kB of additional disk space will be used.
+ Selecting previously unselected package ldirectord.
+ (Reading database ... 30382 files and directories currently installed.)
+ Preparing to unpack .../ldirectord_1%3a4.2.0-1ubuntu1_all.deb ...
+ Unpacking ldirectord (1:4.2.0-1ubuntu1) ...
+ Setting up ldirectord (1:4.2.0-1ubuntu1) ...
+
+ ...(120 second or so delay)...
+
+ Job for ldirectord.service failed because the control process exited with error code.
+ See "systemctl status ldirectord.service" and "journalctl -xe" for details.
+ invoke-rc.d: initscript ldirectord, action "start" failed.
+ ● ldirectord.service - Monitor and administer real servers in a LVS cluster of load balanced virtual servers
+ Loaded: loaded (/lib/systemd/system/ldirectord.service; disabled; vendor preset: enabled)
+ Active: failed (Result: exit-code) since Thu 2019-05-09 11:27:53 UTC; 11ms ago
+ Docs: man:ldirectord(8)
+ Process: 7559 ExecStart=/usr/sbin/ldirectord start (code=exited, status=0/SUCCESS)
+ Process: 7564 ExecStartPost=/usr/bin/touch /var/lock/subsys/ldirectord (code=exited, status=1/FAILURE)
+ Process: 7565 ExecStopPost=/bin/rm -f /var/lock/subsys/ldirectord (code=exited, status=0/SUCCESS)
+ Main PID: 7561
+ Tasks: 3 (limit: 4915)
+ Memory: 71.7M
+ CGroup: /system.slice/ldirectord.service
+ ├─2547 /usr/bin/perl -w /usr/sbin/ldirectord start
+ ├─7078 /usr/bin/perl -w /usr/sbin/ldirectord start
+ └─7561 /usr/bin/perl -w /usr/sbin/ldirectord start
+
+ May 09 11:26:22 lp1828258 systemd[1]: Starting Monitor and administer real servers in a LVS cluster of load balanced virtual servers...
+ May 09 11:26:23 lp1828258 systemd[1]: ldirectord.service: Supervising process 7561 which is not our child. We'll most likely not notice when it exits.
+ May 09 11:26:23 lp1828258 touch[7564]: /usr/bin/touch: cannot touch '/var/lock/subsys/ldirectord': No such file or directory
+
[regression potential]
if something internal to resource-agents actually uses the old SysV-
style /var/lock/subsys lock, removing it could cause a regression.
However, it shouldn't, because the lock was for use only by SysV service
scripts. Also, as we should fix this upstream first, they should know
if it is used for any other purpose, so if they accept the change it
should be safe.
[other info]
this is causing autopkgtest failures, especially on arm; but the failure
could happen on any arch.
+
+ also note that /var/lock/subsys (where /var/lock/ is a symlink to
+ /run/lock) is managed by systemd's tmpfiles, as a 'legacy' directory:
+
+ ubuntu@lp1828258:~$ cat /usr/lib/tmpfiles.d/legacy.conf
+ ...[snip]...
+ # These files are considered legacy and are unnecessary on legacy-free
+ # systems.
+
+ L /var/lock - - - - ../run/lock
+
+ # /run/lock/subsys is used for serializing SysV service execution, and
+ # hence without use on SysV-less systems.
+
+ d /run/lock/subsys 0755 root root -
+
original description:
--
In autopkgtest like
https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-disco-ci-train-ppa-service-3717/disco/armhf/r/resource-agents/20190508_124516_2b20c@/log.gz
https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-disco-ci-train-ppa-service-3717/disco/armhf/r/resource-agents/20190507_202519_be056@/log.gz
https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-disco-ci-train-ppa-service-3717/disco/armhf/r/resource-agents/20190508_083654_2b20c@/log.gz
This fails to install:
Setting up ldirectord (1:4.2.0-1ubuntu1) ...
Job for ldirectord.service failed because the control process exited with error code.
See "systemctl status ldirectord.service" and "journalctl -xe" for details.
invoke-rc.d: initscript ldirectord, action "start" failed.
● ldirectord.service - Monitor and administer real servers in a LVS cluster of load balanced virtual servers
Loaded: loaded (/lib/systemd/system/ldirectord.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2019-05-08 12:20:10 UTC; 42ms ago
Docs: man:ldirectord(8)
Process: 779 ExecStart=/usr/sbin/ldirectord start (code=exited, status=0/SUCCESS)
Process: 783 ExecStartPost=/usr/bin/touch /var/lock/subsys/ldirectord (code=exited, status=1/FAILURE)
Process: 785 ExecStopPost=/bin/rm -f /var/lock/subsys/ldirectord (code=exited, status=0/SUCCESS)
Main PID: 781
Tasks: 1 (limit: 4915)
Memory: 14.1M
CGroup: /system.slice/ldirectord.service
└─781 /usr/bin/perl -w /usr/sbin/ldirectord start
May 08 12:18:39 autopkgtest-lxd-einqza systemd[1]: Starting Monitor and administer real servers in a LVS cluster of load balanced virtual servers...
May 08 12:18:39 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: Supervising process 781 which is not our child. We'll most likely not notice when it exits.
May 08 12:18:40 autopkgtest-lxd-einqza touch[783]: /usr/bin/touch: cannot touch '/var/lock/subsys/ldirectord': No such file or directory
May 08 12:18:40 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: Control process exited, code=exited, status=1/FAILURE
May 08 12:20:10 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: State 'stop-post' timed out. Terminating.
May 08 12:20:10 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: Failed with result 'exit-code'.
May 08 12:20:10 autopkgtest-lxd-einqza systemd[1]: Failed to start Monitor and administer real servers in a LVS cluster of load balanced virtual servers.
Of particular interest might be this line:
touch[783]: /usr/bin/touch: cannot touch '/var/lock/subsys/ldirectord': No such file or directory
This runs in LXD, maybe a pathing or apparmor issue?
I tried the same on a real armhf device and it works right away.
(Thanks waveform to provide armhf raspi)
** Changed in: resource-agents (Ubuntu Eoan)
Importance: Undecided => Medium
** Changed in: resource-agents (Ubuntu Disco)
Importance: Undecided => Medium
** Changed in: resource-agents (Ubuntu Cosmic)
Importance: Undecided => Medium
** Changed in: resource-agents (Ubuntu Bionic)
Importance: Undecided => Medium
** Changed in: resource-agents (Ubuntu Eoan)
Status: New => In Progress
** Changed in: resource-agents (Ubuntu Disco)
Status: New => In Progress
** Changed in: resource-agents (Ubuntu Cosmic)
Status: New => In Progress
** Changed in: resource-agents (Ubuntu Bionic)
Status: New => In Progress
** Changed in: resource-agents (Ubuntu Eoan)
Assignee: (unassigned) => Heitor Alves de Siqueira (halves)
** Changed in: resource-agents (Ubuntu Disco)
Assignee: (unassigned) => Heitor Alves de Siqueira (halves)
** Changed in: resource-agents (Ubuntu Cosmic)
Assignee: (unassigned) => Heitor Alves de Siqueira (halves)
** Changed in: resource-agents (Ubuntu Bionic)
Assignee: (unassigned) => Heitor Alves de Siqueira (halves)
** Also affects: resource-agents (Ubuntu Xenial)
Importance: Undecided
Status: New
** Changed in: resource-agents (Ubuntu Xenial)
Status: New => In Progress
** Changed in: resource-agents (Ubuntu Xenial)
Importance: Undecided => Medium
** Changed in: resource-agents (Ubuntu Xenial)
Assignee: (unassigned) => Heitor Alves de Siqueira (halves)
--
You received this bug notification because you are a member of नेपाली
भाषा समायोजकहरुको समूह, which is subscribed to Xenial.
Matching subscriptions: Ubuntu 16.04 Bugs
https://bugs.launchpad.net/bugs/1828258
Title:
ldirectord systemd service fails if no /var/lock/subsys dir
Status in resource-agents package in Ubuntu:
In Progress
Status in resource-agents source package in Xenial:
In Progress
Status in resource-agents source package in Bionic:
In Progress
Status in resource-agents source package in Cosmic:
In Progress
Status in resource-agents source package in Disco:
In Progress
Status in resource-agents source package in Eoan:
In Progress
Bug description:
[impact]
ldirectord's systemd service script contains commands to touch and
remove a file in the /var/lock/subsys directory; however, locks there
are a SysV service serialization thing, and are unneeded with systemd.
It's unclear why the ldirectord systemd service script contains the
lines, but they come from upstream so we should get it fixed there and
then correct debian and ubuntu.
this impacts users because if no /var/lock/subsys directory exists,
the systemd service will fail to start, which can impact installing or
upgrading the resource-agents package.
[test case]
remove the /var/lock/subsys directory and try to install or upgrade
ldirectord:
ubuntu@lp1828258:~$ sudo rmdir /var/lock/subsys
ubuntu@lp1828258:~$ sudo apt install ldirectord
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following package was automatically installed and is no longer required:
libfreetype6
Use 'sudo apt autoremove' to remove it.
The following NEW packages will be installed:
ldirectord
0 upgraded, 1 newly installed, 0 to remove and 0 not upgraded.
Need to get 0 B/62.1 kB of archives.
After this operation, 233 kB of additional disk space will be used.
Selecting previously unselected package ldirectord.
(Reading database ... 30382 files and directories currently installed.)
Preparing to unpack .../ldirectord_1%3a4.2.0-1ubuntu1_all.deb ...
Unpacking ldirectord (1:4.2.0-1ubuntu1) ...
Setting up ldirectord (1:4.2.0-1ubuntu1) ...
...(120 second or so delay)...
Job for ldirectord.service failed because the control process exited with error code.
See "systemctl status ldirectord.service" and "journalctl -xe" for details.
invoke-rc.d: initscript ldirectord, action "start" failed.
● ldirectord.service - Monitor and administer real servers in a LVS cluster of load balanced virtual servers
Loaded: loaded (/lib/systemd/system/ldirectord.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Thu 2019-05-09 11:27:53 UTC; 11ms ago
Docs: man:ldirectord(8)
Process: 7559 ExecStart=/usr/sbin/ldirectord start (code=exited, status=0/SUCCESS)
Process: 7564 ExecStartPost=/usr/bin/touch /var/lock/subsys/ldirectord (code=exited, status=1/FAILURE)
Process: 7565 ExecStopPost=/bin/rm -f /var/lock/subsys/ldirectord (code=exited, status=0/SUCCESS)
Main PID: 7561
Tasks: 3 (limit: 4915)
Memory: 71.7M
CGroup: /system.slice/ldirectord.service
├─2547 /usr/bin/perl -w /usr/sbin/ldirectord start
├─7078 /usr/bin/perl -w /usr/sbin/ldirectord start
└─7561 /usr/bin/perl -w /usr/sbin/ldirectord start
May 09 11:26:22 lp1828258 systemd[1]: Starting Monitor and administer real servers in a LVS cluster of load balanced virtual servers...
May 09 11:26:23 lp1828258 systemd[1]: ldirectord.service: Supervising process 7561 which is not our child. We'll most likely not notice when it exits.
May 09 11:26:23 lp1828258 touch[7564]: /usr/bin/touch: cannot touch '/var/lock/subsys/ldirectord': No such file or directory
[regression potential]
if something internal to resource-agents actually uses the old SysV-
style /var/lock/subsys lock, removing it could cause a regression.
However, it shouldn't, because the lock was for use only by SysV
service scripts. Also, as we should fix this upstream first, they
should know if it is used for any other purpose, so if they accept the
change it should be safe.
[other info]
this is causing autopkgtest failures, especially on arm; but the
failure could happen on any arch.
also note that /var/lock/subsys (where /var/lock/ is a symlink to
/run/lock) is managed by systemd's tmpfiles, as a 'legacy' directory:
ubuntu@lp1828258:~$ cat /usr/lib/tmpfiles.d/legacy.conf
...[snip]...
# These files are considered legacy and are unnecessary on legacy-free
# systems.
L /var/lock - - - - ../run/lock
# /run/lock/subsys is used for serializing SysV service execution, and
# hence without use on SysV-less systems.
d /run/lock/subsys 0755 root root -
original description:
--
In autopkgtest like
https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-disco-ci-train-ppa-service-3717/disco/armhf/r/resource-agents/20190508_124516_2b20c@/log.gz
https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-disco-ci-train-ppa-service-3717/disco/armhf/r/resource-agents/20190507_202519_be056@/log.gz
https://objectstorage.prodstack4-5.canonical.com/v1/AUTH_77e2ada1e7a84929a74ba3b87153c0ac/autopkgtest-disco-ci-train-ppa-service-3717/disco/armhf/r/resource-agents/20190508_083654_2b20c@/log.gz
This fails to install:
Setting up ldirectord (1:4.2.0-1ubuntu1) ...
Job for ldirectord.service failed because the control process exited with error code.
See "systemctl status ldirectord.service" and "journalctl -xe" for details.
invoke-rc.d: initscript ldirectord, action "start" failed.
● ldirectord.service - Monitor and administer real servers in a LVS cluster of load balanced virtual servers
Loaded: loaded (/lib/systemd/system/ldirectord.service; disabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Wed 2019-05-08 12:20:10 UTC; 42ms ago
Docs: man:ldirectord(8)
Process: 779 ExecStart=/usr/sbin/ldirectord start (code=exited, status=0/SUCCESS)
Process: 783 ExecStartPost=/usr/bin/touch /var/lock/subsys/ldirectord (code=exited, status=1/FAILURE)
Process: 785 ExecStopPost=/bin/rm -f /var/lock/subsys/ldirectord (code=exited, status=0/SUCCESS)
Main PID: 781
Tasks: 1 (limit: 4915)
Memory: 14.1M
CGroup: /system.slice/ldirectord.service
└─781 /usr/bin/perl -w /usr/sbin/ldirectord start
May 08 12:18:39 autopkgtest-lxd-einqza systemd[1]: Starting Monitor and administer real servers in a LVS cluster of load balanced virtual servers...
May 08 12:18:39 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: Supervising process 781 which is not our child. We'll most likely not notice when it exits.
May 08 12:18:40 autopkgtest-lxd-einqza touch[783]: /usr/bin/touch: cannot touch '/var/lock/subsys/ldirectord': No such file or directory
May 08 12:18:40 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: Control process exited, code=exited, status=1/FAILURE
May 08 12:20:10 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: State 'stop-post' timed out. Terminating.
May 08 12:20:10 autopkgtest-lxd-einqza systemd[1]: ldirectord.service: Failed with result 'exit-code'.
May 08 12:20:10 autopkgtest-lxd-einqza systemd[1]: Failed to start Monitor and administer real servers in a LVS cluster of load balanced virtual servers.
Of particular interest might be this line:
touch[783]: /usr/bin/touch: cannot touch '/var/lock/subsys/ldirectord': No such file or directory
This runs in LXD, maybe a pathing or apparmor issue?
I tried the same on a real armhf device and it works right away.
(Thanks waveform to provide armhf raspi)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/resource-agents/+bug/1828258/+subscriptions