hugin-devs team mailing list archive

[Othmar Marti <801862@xxxxxxxxxxxxxxxxxx>]

The processor is according to siSoft sandra

Othmar

SiSoftware Sandra

Processor
Manufacturer : Intel
Model : Intel(R) Core(TM)2 Duo CPU     P9400  @ 2.40GHz
Speed : 2.53GHz
Peak Processing Performance (PPP) : 20.22GFLOPS
Adjusted Peak Performance (APP) : 6WG
Cores per Processor : 2 Unit(s)
Type : Mobile, Dual-Core
Bus : Intel AGTL+
Package : FC µPGA (Socket P)
Maximum Speed : 2.4GHz / 4x 267MHz (1GHz)
OverClock Factor : 5%
Multiplier : 19/2x
Minimum/Maximum/Turbo Multiplier : 3x - 9x - 9x
Generation : G8 / T12
Name : C2DP (Penryn) Mobile Core 2 Duo 45nm 2.1-2.8GHz 1.0-1.15V
Revision/Stepping : 0 : 17 / A
Stepping Mask : E0/R0
Microcode : MU06170A07
Core Voltage Rating : 1.263V
Min/Max Core Voltage : 0.713V - 1.263V - 1.263V
Maximum Power : 31.203W - 31.203W
Maximum Physical / Virtual Addressing : 36-bit / 48-bit
Native Page Size : 4kB
Large Page Size : 2MB

Co-Processor (FPU)
Speed : 2.53GHz
Type : Integrated
Revision/Stepping : 0 : 17 / A

Integrated Data Cache
Size : 32kB, Synchronous, Write-Thru, 8-way, 64 byte line size
TLB - Translation Lookaside Buffer : 4kB : 256 4-way; 2MB : 16 4-way

Integrated Instruction Cache
Size : 32kB, Synchronous, Write-Back, 8-way, 64 byte line size
TLB - Translation Lookaside Buffer : 4kB : 128 4-way; 2MB : 8 4-way

L2 Cache
Size : 6MB, ECC, Synchronous, ATC, 24-way, 64 byte line size, 2 threads sharing
Multiplier : 1x

Upgradeability
Socket/Slot : Microprocessor
Supported Speed(s) : 2.53GHz

Processor Power Management
2.4GHz 9x : 1.263V 31.203W
798MHz 3x : 0.713V 3.300W

Power Policy(es)
Name
Processor Throttling Support : No
Throttle Range : 5% - 100%

Sensor
Model : Intel Core CPU [P1, C2]
Version : 23.10
Mainboard Specific Support : No

Power Rating(s)
CPU Core Power : 27.028W

Sensors
CPU 1 Temperature : 53.00°C
CPU 1 DC Line : 1.175V

Features
FPU - Integrated Co-Processor : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange 8-bytes Instruction : Yes
APIC - Local APIC Integrated : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : Yes
ACPI - Software Clock Control : Yes
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : Yes
HTT - Hyper-Threading Technology : Yes
TM - Thermal Monitor : Yes
PBE - Pending Break Enable : Yes
IA64 Technology : No
SSE3 Technology : Yes
PCLMULQDQ - Carryless Multiplication : No
MON - Monitor/MWait : Yes
DSCPL - CPL qualified Debug Store : Yes
VMX - Virtual Machine eXtensions : Yes
SMX - Trust Execution Technology : Yes
EIST - Enhanced SpeedStep Technology : Yes
TM2 - Thermal Monitor 2 : Yes
Supplemental SSE3 Technology : Yes
CID - Context ID : No
FMA3 - Fused Multiply/Add eXtensions : No
CX16 - Compare & Exchange 16-bytes Instruction : Yes
xTPR - Send Task Priority Messages : Yes
PDCM - PerfMon and Debug : Yes
DCA - Direct Cache Access : No
SSE4.1 Technology : Yes
SSE4.2 Technology : No
x2APIC - v2 APIC Mode : No
MOVBE - Byte-swap Load/Store : No
POPCNT - Pop Count : No
AES - Cryptography Support : No
XSAVE - eXtended State Management : Yes
OSXSAVE - OS Enabled eXtended States : Yes
AVX - Advanced Vector eXtensions : No
F16C - Half Precision Float Conversion : No
RNG - Random Number Generator : No
GIH - Guest in Hypervisor : No
DAZ - Denormals Are Zero : Yes
FSGSBASE - Base Segment Manipulation : No
BMI1 - Bit Manipulation Support : No
AVX2 - Advanced Vector eXtensions V2 Support : No
BMI2 - Bit Manipulation V2 Support : No
ERMS - ERMS : No
INVCPID - Context ID Management : No

Extended Features
EMMX - Extended MMX Technology : No
3DNow! Technology : No
Extended 3DNow! Technology : No
XD/NX - No-execute Page Protection : Yes
AMD64/EM64T Technology : Yes
RDTSCP - Serialised TSC : No
P1GB - 1GB Large Page Support : No
SVM - Secure Virtual Machine : No
AltMovCr8 - Lock Move CRn : No
ABM - Advanced Bit Manipulation : No
SSE4A Technology : No
MASSE - Misaligned SSE Mode : No
3D Now! Prefetch Technology : No
XOP - eXtended OPerations : No
LWP - LightWeight Profiling Support : No
FMA4 - 4 Operand Fused Multiply/Add eXtensions : No
TCE - Translation Cache eXtension : No
NID - Multi-Node Support : No
TBM - Trailing Bit Manipulation : No
TOP - eXtended Topology : No
PCXC - Core Performance Counter eXtensions : Yes
PNXC - NB Performance Counter eXtensions : No

Power Management Features
DTSC - Digital Thermal Sensor Capability : Yes
IDA - Dynamic Acceleration Technology : Yes
EEPOL - Energy Efficient Policy : No
HCFC - Hardware Coordination Feedback/Effective Frequency : Yes

Virtual Machine Features
Version : 0.13
Address Width Limited to 32-bit : No
Dual-Monitor Interrupts/System Management Mode : Yes
Report Information on VMExit : Yes
Ex Capability MSR Supported : No

Advanced Settings
Fast Strings : Yes
PM - Performance Monitoring Support : Yes
PEBS - Precise Event Based Sampling Support : Yes
XE Operation Enabled : No
Hardware Prefetcher Enabled : Yes
Adjacent Cache Line Prefetch Enabled : Yes
Data Cache Prefetcher Enabled : Yes
Instruction Prefetcher Enabled : Yes
IDA - Dynamic Acceleration Technology : Yes
TM2 - Thermal Monitor 2 : Yes
EIST - Enhanced SpeedStep Technology : Yes
Average Clock Speed : 104.32%

Symmetric Multiprocessing (SMP) Settings
Bootstrap CPU : Yes
Global APIC Engaged : Yes
x2APIC - v2 APIC Mode : No
APIC ID : 0 : P0C0T0
Cluster ID : 0
Symmetric Arbitration ID : 0
Memory Range : 00000000FEE00000

Machine Check Architecture Settings
Number of Reporting Banks : 6

Variable Range MTRR Settings
MTRR 0 : 00000000-FFFFFFFF WB
MTRR 1 : DDC00000-DDFFFFFF UC
MTRR 2 : DE000000-DFFFFFFF UC
MTRR 3 : E0000000-FFFFFFFF UC

Fixed Range MTRR Settings
MTRR 0 Range 0 : 00000000-0000FFFF WB
MTRR 0 Range 1 : 00010000-0001FFFF WB
MTRR 0 Range 2 : 00020000-0002FFFF WB
MTRR 0 Range 3 : 00030000-0003FFFF WB
MTRR 0 Range 4 : 00040000-0004FFFF WB
MTRR 0 Range 5 : 00050000-0005FFFF WB
MTRR 0 Range 6 : 00060000-0006FFFF WB
MTRR 0 Range 7 : 00070000-0007FFFF WB
MTRR 1 Range 0 : 00080000-00083FFF WB
MTRR 1 Range 1 : 00084000-00087FFF WB
MTRR 1 Range 2 : 00088000-0008BFFF WB
MTRR 1 Range 3 : 0008C000-0008FFFF WB
MTRR 1 Range 4 : 00090000-00093FFF WB
MTRR 1 Range 5 : 00094000-00097FFF WB
MTRR 1 Range 6 : 00098000-0009BFFF WB
MTRR 1 Range 7 : 0009C000-0009FFFF WB
MTRR 2 Range 0 : 000A0000-000A3FFF UC
MTRR 2 Range 1 : 000A4000-000A7FFF UC
MTRR 2 Range 2 : 000A8000-000ABFFF UC
MTRR 2 Range 3 : 000AC000-000AFFFF UC
MTRR 2 Range 4 : 000B0000-000B3FFF UC
MTRR 2 Range 5 : 000B4000-000B7FFF UC
MTRR 2 Range 6 : 000B8000-000BBFFF UC
MTRR 2 Range 7 : 000BC000-000BFFFF UC
MTRR 3 Range 0 : 000C0000-000C0FFF WP
MTRR 3 Range 1 : 000C1000-000C1FFF WP
MTRR 3 Range 2 : 000C2000-000C2FFF WP
MTRR 3 Range 3 : 000C3000-000C3FFF WP
MTRR 3 Range 4 : 000C4000-000C4FFF WP
MTRR 3 Range 5 : 000C5000-000C5FFF WP
MTRR 3 Range 6 : 000C6000-000C6FFF WP
MTRR 3 Range 7 : 000C7000-000C7FFF WP
MTRR 4 Range 0 : 000C8000-000C8FFF WP
MTRR 4 Range 1 : 000C9000-000C9FFF WP
MTRR 4 Range 2 : 000CA000-000CAFFF WP
MTRR 4 Range 3 : 000CB000-000CBFFF WP
MTRR 4 Range 4 : 000CC000-000CCFFF WP
MTRR 4 Range 5 : 000CD000-000CDFFF WP
MTRR 4 Range 6 : 000CE000-000CEFFF WP
MTRR 4 Range 7 : 000CF000-000CFFFF WP
MTRR 5 Range 0 : 000D0000-000D0FFF WP
MTRR 5 Range 1 : 000D1000-000D1FFF WP
MTRR 5 Range 2 : 000D2000-000D2FFF WP
MTRR 5 Range 3 : 000D3000-000D3FFF WP
MTRR 5 Range 4 : 000D4000-000D4FFF WP
MTRR 5 Range 5 : 000D5000-000D5FFF WP
MTRR 5 Range 6 : 000D6000-000D6FFF WP
MTRR 5 Range 7 : 000D7000-000D7FFF WP
MTRR 6 Range 0 : 000D8000-000D8FFF UC
MTRR 6 Range 1 : 000D9000-000D9FFF UC
MTRR 6 Range 2 : 000DA000-000DAFFF UC
MTRR 6 Range 3 : 000DB000-000DBFFF UC
MTRR 6 Range 4 : 000DC000-000DCFFF UC
MTRR 6 Range 5 : 000DD000-000DDFFF UC
MTRR 6 Range 6 : 000DE000-000DEFFF UC
MTRR 6 Range 7 : 000DF000-000DFFFF UC
MTRR 7 Range 0 : 000E0000-000E0FFF UC
MTRR 7 Range 1 : 000E1000-000E1FFF UC
MTRR 7 Range 2 : 000E2000-000E2FFF UC
MTRR 7 Range 3 : 000E3000-000E3FFF UC
MTRR 7 Range 4 : 000E4000-000E4FFF UC
MTRR 7 Range 5 : 000E5000-000E5FFF UC
MTRR 7 Range 6 : 000E6000-000E6FFF UC
MTRR 7 Range 7 : 000E7000-000E7FFF UC
MTRR 8 Range 0 : 000E8000-000E8FFF UC
MTRR 8 Range 1 : 000E9000-000E9FFF UC
MTRR 8 Range 2 : 000EA000-000EAFFF UC
MTRR 8 Range 3 : 000EB000-000EBFFF UC
MTRR 8 Range 4 : 000EC000-000ECFFF UC
MTRR 8 Range 5 : 000ED000-000EDFFF UC
MTRR 8 Range 6 : 000EE000-000EEFFF UC
MTRR 8 Range 7 : 000EF000-000EFFFF UC
MTRR 9 Range 0 : 000F0000-000F0FFF WP
MTRR 9 Range 1 : 000F1000-000F1FFF WP
MTRR 9 Range 2 : 000F2000-000F2FFF WP
MTRR 9 Range 3 : 000F3000-000F3FFF WP
MTRR 9 Range 4 : 000F4000-000F4FFF WP
MTRR 9 Range 5 : 000F5000-000F5FFF WP
MTRR 9 Range 6 : 000F6000-000F6FFF WP
MTRR 9 Range 7 : 000F7000-000F7FFF WP
MTRR 10 Range 0 : 000F8000-000F8FFF WP
MTRR 10 Range 1 : 000F9000-000F9FFF WP
MTRR 10 Range 2 : 000FA000-000FAFFF WP
MTRR 10 Range 3 : 000FB000-000FBFFF WP
MTRR 10 Range 4 : 000FC000-000FCFFF WP
MTRR 10 Range 5 : 000FD000-000FDFFF WP
MTRR 10 Range 6 : 000FE000-000FEFFF WP
MTRR 10 Range 7 : 000FF000-000FFFFF WP

PAT Settings
PAT 0 : WB
PAT 1 : WC
PAT 2 : UC-
PAT 3 : UC
PAT 4 : WB
PAT 5 : WC
PAT 6 : UC-
PAT 7 : UC


** Changed in: hugin
       Status: Incomplete => New

-- 
You received this bug notification because you are a member of Hugin
Developers, which is subscribed to Hugin.
https://bugs.launchpad.net/bugs/801862

Title:
  Hugin.exe on win 7 crashes on exit when fast preview is open

Status in Hugin - Panorama Tools GUI:
  New

Bug description:
  System: Windows 7 SP1 with McAfee Antivirus
  Hugin.exe both 2011.0.0 and 2011.2.0 beta2
  To reproduce the bug:
  Open Hugin
  load a panorama file xxx.pto
  open the fast preview
  change to hugin
  close hugin with the menu (files, exit)
  hugin crashes

  The following sequences do not crash hugin
  open hugin.exe
  load a panorama
  open the standard previewer
  switch to hugin
  close hugin

  and

  open hugin
  open a panorama
  close hugin

  It seems that some communication between the fast previewer and hugin
  is mixed up

  when using 2010.4 this crash does not happen

  Greetings,

  Othmar

To manage notifications about this bug go to:
https://bugs.launchpad.net/hugin/+bug/801862/+subscriptions