hugin-devs team mailing list archive

[tmodes <1531567@xxxxxxxxxxxxxxxxxx>]

** Changed in: hugin
    Milestone: None => 2016.0beta1

** Changed in: hugin
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Hugin
Developers, which is subscribed to Hugin.
https://bugs.launchpad.net/bugs/1531567

Title:
  Hugin crashes when merging projects with line control points

Status in Hugin:
  Fix Released

Bug description:
  (Hugin 2015.0.0 on Windows 7).

  I'm trying to merge two projects, one of which contains line control
  points (not horizontal or vertical lines). It has more than 1 type of
  these line control points (eg, "Line 3", "Line 4", etc. in the control
  point "mode" dropdown or the "alignment" column of the control points
  table). The merge crashes every time. If I remove the "Line 4+"
  control points (Line 3 is fine, horizontal and vertical line is fine),
  the projects merge okay.

  How to reproduce:

  1) Create a new project, import one picture, and save it.

  2) Create another new project, import one picture, and go into the
  Control Points tab. This should show the one image in both the left
  and right views.

  3) Click in the left image, then click in the right image to add a
  line control point. This will default to horizontal or vertical.

  4) If you open the 'mode' dropdown at lower right, you can pick "Add
  new Line" down at the bottom. When you do this, the control point's
  "Alignment" will now be "Line 3".

  5) Repeat 3) and 4) to create another line control point. This time
  when you do "Add new Line" it will have alignment "Line 4".

  6) Save the project.

  7) Go to File>Merge Project, and merge with the other project you
  created in 1).

  8) Hugin crashes.

  If I had to guess, I would say the bug has to do with pto_merge not
  understanding how to merge control points in the project where the
  type is > "t3" (if you open up the project file in a text editor you
  can see each control point has one of these, t0= normal, t1 =
  horizontal, t2 = vertical, t3+ = "Line 3+".

  Obviously this won't be fixed soon, and there's a kind of hackish
  workaround, but I thought I'd report it.

  Thanks!

  P.S. the workaround I'm using is the following:

  1) In the project with the extra line control points, go into the
  control points table and remove all the line control points with
  Alignment of Line 4 or greater. (Click on the Alignment column to sort
  by that, then shift-click to select all the ones to delete).

  2) Merge with the other project. It should merge fine. But you're
  missing your line control points.

  3) Save *as a new project*.

  4) Close Hugin

  5) Go into a text editor, open the old project with the line control
  points in it.

  6) Also open the new merged project.

  7) Find the bottom of the control points section in the old project.
  If the last control point was one of the ones you deleted, keep going
  up until you get to one that ends with "t0", "t1", "t2", or "t3" (ie,
  one you didn't delete in the merged project).

  8) Copy that line, go back to the new project text file, and find it.
  It should be the last line before the beginning of control points from
  the project you were trying to merge in.

  9) Go back to the old project text file, and copy all of the control
  points.

  10) Go back to the merged project text file, and *replace* all the
  control points above the line you identified with all the control
  points you just copied. This will not change any of the other control
  points, but will add in the offending line control points.

  11) If the second project also had line control points, use the same
  procedure to paste them in from the text version of that project, too.

  12) Save the merged project in your text editor, and open it in Hugin.
  It should be the merger of the two projects, with all the line control
  points in place!

To manage notifications about this bug go to:
https://bugs.launchpad.net/hugin/+bug/1531567/+subscriptions