hugin-devs team mailing list archive
-
hugin-devs team
-
Mailing list archive
-
Message #06956
[Bug 1758503] [NEW] Fw: hugin: fails to find control-points, defective
Public bug reported:
Begin forwarded message:
Date: Fri, 23 Mar 2018 08:38:52 +0100
From: andrew glaeser <bugs@xxxxxxxxxxxxxxxx>
To: submit@xxxxxxxxxxxxxxx
Subject: hugin: fails to find control-points, defective
- -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Package: hugin
Version: 2018.0.0+dfsg-1+b1
Severity: important
Dear Maintainer,
the problem exists since the the stretch-release, in fact the tendency to
defectiveness of the GUI showed already with Jessie+backports, it wasn't
possible to stitch the panoramic views there using the GUI, but one had to do
it on the terminal using this instead:
> hugin_stitch_project (1) - Stitch a hugin project
With the stretch-release the situation worsened, now GUI is not workable at
all anymore, because either the order of images is wrong, so there can be no
control-points found, or otherwise cpoints are found for two images out of
three only.
I used to start off with the Assistant, then switched to the advanced view,
sharing of data between the two now also seems to be broken.
Now it is basically the same story both in the simple view, using the
Assistant or with the advanced view, that hugin is _not_workable_.
I upgraded to the version in Testing (buster):
> andrew@a68n:~$ sat install -t testing hugin
> [sudo] password for andrew:
> The following NEW packages will be installed:
> libilmbase23{a} libopenexr23{a}
> The following packages will be upgraded:
> hugin hugin-data hugin-tools libc-bin libc-l10n libc6 libwxbase3.0-0v5
> libwxgtk3.0-0v5 locales 9 packages upgraded, 2 newly installed, 0 to remove
> and 2131 not upgraded. Need to get 26.4 MB of archives. After unpacking
> 7,211 kB will be used. The following packages have unmet dependencies:
> libc6-dev : Depends: libc6 (= 2.24-11+deb9u3) but 2.27-2 is to be installed
> libc6-i386 : Depends: libc6 (= 2.24-11+deb9u3) but 2.27-2 is to be
> installed libc-dev-bin : Depends: libc6 (< 2.25) but 2.27-2 is to be
> installed open: 20; closed: 36; defer: 4; conflict:
> 4 .Internal
> error: found 2 (choice -> promotion) mappings for a single choice. Internal
> error: found 2 (choice -> promotion) mappings for a single choice. The
> following actions will resolve these dependencies:
>
> Upgrade the following packages:
> 1) libc-dev-bin [2.24-11+deb9u3 (now, stable) -> 2.27-2 (testing)]
> 2) libc6-dev [2.24-11+deb9u3 (now, stable) -> 2.27-2 (testing)]
> 3) libc6-i386 [2.24-11+deb9u3 (now, stable) -> 2.27-2 (testing)]
>
>
>
> Accept this solution? [Y/n/q/?]
> The following NEW packages will be installed:
> libilmbase23{a} libopenexr23{a}
> The following packages will be upgraded:
> hugin hugin-data hugin-tools libc-bin libc-dev-bin libc-l10n libc6
> libc6-dev libc6-i386 libwxbase3.0-0v5 libwxgtk3.0-0v5 locales
> 12 packages upgraded, 2 newly installed, 0 to remove and 2128 not upgraded.
> Need to get 32.2 MB of archives. After unpacking 10.8 MB will be used.
> Do you want to continue? [Y/n/?]
> Get: 1 http://ftp2.de.debian.org/debian buster/main amd64 libc-l10n all
> 2.27-2 [859 kB] Get: 2 http://ftp2.de.debian.org/debian buster/main amd64
> libc6-i386 amd64 2.27-2 [2,852 kB] Get: 3 http://ftp2.de.debian.org/debian
> buster/main amd64 libc-dev-bin amd64 2.27-2 [270 kB] Get: 4
> http://ftp2.de.debian.org/debian buster/main amd64 libc6-dev amd64 2.27-2
> [2,670 kB] Get: 5 http://ftp2.de.debian.org/debian buster/main amd64
> locales all 2.27-2 [3,804 kB] Get: 6 http://ftp2.de.debian.org/debian
> buster/main amd64 libc6 amd64 2.27-2 [2,904 kB] Get: 7
> http://ftp2.de.debian.org/debian buster/main amd64 libc-bin amd64 2.27-2
> [786 kB] Get: 8 http://ftp2.de.debian.org/debian buster/main amd64 hugin
> amd64 2018.0.0+dfsg-1+b1 [1,250 kB] Get: 9 http://ftp2.de.debian.org/debian
> buster/main amd64 hugin-tools amd64 2018.0.0+dfsg-1+b1 [3,141 kB] Get: 10
> http://ftp2.de.debian.org/debian buster/main amd64 hugin-data all
> 2018.0.0+dfsg-1 [7,625 kB] Get: 11 http://ftp2.de.debian.org/debian
> buster/main amd64 libilmbase23 amd64 2.2.1-2 [85.6 kB] Get: 12
> http://ftp2.de.debian.org/debian buster/main amd64 libopenexr23 amd64
> 2.2.1-4 [579 kB] Get: 13 http://ftp2.de.debian.org/debian buster/main amd64
> libwxbase3.0-0v5 amd64 3.0.3.1+dfsg2-1 [1,063 kB] Get: 14
> http://ftp2.de.debian.org/debian buster/main amd64 libwxgtk3.0-0v5 amd64
> 3.0.3.1+dfsg2-1 [4,321 kB] Fetched 32.2 MB in 7s (4,264 kB/s) Reading
> changelogs... Done apt-listchanges: Mailing root: apt-listchanges: news for
> a68n Preconfiguring packages ... (Reading database ... 479860 files and
> directories currently installed.) Preparing to
> unpack .../0-libc-l10n_2.27-2_all.deb ... Unpacking libc-l10n (2.27-2) over
> (2.24-11+deb9u3) ... Preparing to
> unpack .../1-libc6-i386_2.27-2_amd64.deb ... Unpacking libc6-i386 (2.27-2)
> over (2.24-11+deb9u3) ... Preparing to
> unpack .../2-libc-dev-bin_2.27-2_amd64.deb ... Unpacking libc-dev-bin
> (2.27-2) over (2.24-11+deb9u3) ... Preparing to
> unpack .../3-libc6-dev_2.27-2_amd64.deb ... Unpacking libc6-dev:amd64
> (2.27-2) over (2.24-11+deb9u3) ... Preparing to
> unpack .../4-locales_2.27-2_all.deb ... Unpacking locales (2.27-2) over
> (2.24-11+deb9u3) ... Preparing to unpack .../5-libc6_2.27-2_amd64.deb ...
> Checking for services that may need to be restarted... Checking init
> scripts... Unpacking libc6:amd64 (2.27-2) over (2.24-11+deb9u3) ... Setting
> up libc6:amd64 (2.27-2) ... Installing new version of config
> file /etc/ld.so.conf.d/x86_64-linux-gnu.conf ... Checking for services that
> may need to be restarted... Checking init scripts...
>
> Restarting services possibly affected by the upgrade:
> exim4: restarting...done.
> cups: restarting...done.
> cron: restarting...done.
> atd: restarting...done.
>
> Services restarted successfully.
> (Reading database ... 479934 files and directories currently installed.)
> Preparing to unpack .../libc-bin_2.27-2_amd64.deb ...
> Unpacking libc-bin (2.27-2) over (2.24-11+deb9u3) ...
> Setting up libc-bin (2.27-2) ...
> (Reading database ... 479934 files and directories currently installed.)
> Preparing to unpack .../0-hugin_2018.0.0+dfsg-1+b1_amd64.deb ...
> Unpacking hugin (2018.0.0+dfsg-1+b1) over (2016.2.0+dfsg-1) ...
> Preparing to unpack .../1-hugin-tools_2018.0.0+dfsg-1+b1_amd64.deb ...
> Unpacking hugin-tools (2018.0.0+dfsg-1+b1) over (2016.2.0+dfsg-1) ...
> Preparing to unpack .../2-hugin-data_2018.0.0+dfsg-1_all.deb ...
> Unpacking hugin-data (2018.0.0+dfsg-1) over (2016.2.0+dfsg-1) ...
> Selecting previously unselected package libilmbase23:amd64.
> Preparing to unpack .../3-libilmbase23_2.2.1-2_amd64.deb ...
> Unpacking libilmbase23:amd64 (2.2.1-2) ...
> Selecting previously unselected package libopenexr23:amd64.
> Preparing to unpack .../4-libopenexr23_2.2.1-4_amd64.deb ...
> Unpacking libopenexr23:amd64 (2.2.1-4) ...
> Preparing to unpack .../5-libwxbase3.0-0v5_3.0.3.1+dfsg2-1_amd64.deb ...
> Unpacking libwxbase3.0-0v5:amd64 (3.0.3.1+dfsg2-1) over (3.0.2+dfsg-4) ...
> Preparing to unpack .../6-libwxgtk3.0-0v5_3.0.3.1+dfsg2-1_amd64.deb ...
> Unpacking libwxgtk3.0-0v5:amd64 (3.0.3.1+dfsg2-1) over (3.0.2+dfsg-4) ...
> Processing triggers for mime-support (3.60) ...
> Processing triggers for desktop-file-utils (0.23-1) ...
> Setting up libilmbase23:amd64 (2.2.1-2) ...
> Setting up libc6-i386 (2.27-2) ...
> Processing triggers for gnome-icon-theme (3.12.0-2) ...
> Setting up libwxbase3.0-0v5:amd64 (3.0.3.1+dfsg2-1) ...
> Processing triggers for libc-bin (2.27-2) ...
> Setting up libc-l10n (2.27-2) ...
> Setting up hugin-data (2018.0.0+dfsg-1) ...
> Processing triggers for man-db (2.7.6.1-2) ...
> Processing triggers for shared-mime-info (1.8-1) ...
> Unknown media type in type 'all/all'
> Unknown media type in type 'all/allfiles'
> Setting up libc-dev-bin (2.27-2) ...
> Processing triggers for gnome-menus (3.13.3-9) ...
> Setting up libc6-dev:amd64 (2.27-2) ...
> Setting up locales (2.27-2) ...
> Installing new version of config file /etc/locale.alias ...
> Generating locales (this might take a while)...
> en_GB.UTF-8... done
> Generation complete.
> Setting up libopenexr23:amd64 (2.2.1-4) ...
> Setting up libwxgtk3.0-0v5:amd64 (3.0.3.1+dfsg2-1) ...
> Setting up hugin-tools (2018.0.0+dfsg-1+b1) ...
> Setting up hugin (2018.0.0+dfsg-1+b1) ...
> Processing triggers for libc-bin (2.27-2) ...
>
> Current status: 2129 (-11) upgradable.
- - -- System Information:
Debian Release: 9.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable'), (52, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.14.13-ad-bpo (SMP w/3 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages hugin depends on:
ii enblend 4.2-2
ii enfuse 4.2-2
ii hugin-tools 2018.0.0+dfsg-1+b1
ii libc6 2.27-2
ii libexiv2-14 0.25-3.1
ii libfftw3-double3 3.3.5-3
ii libgcc1 1:6.3.0-18+deb9u1
ii libgl1-mesa-glx [libgl1] 13.0.6-1+b2
ii libglew2.0 2.0.0-3+b1
ii libglu1-mesa [libglu1] 9.0.0-2.1
ii libgomp1 6.3.0-18+deb9u1
ii libimage-exiftool-perl 10.40-1
ii liblcms2-2 2.8-4
ii libpano13-3 2.9.19+dfsg-2+b2
ii libsqlite3-0 3.16.2-5+deb9u1
ii libstdc++6 6.3.0-18+deb9u1
ii libtiff5 4.0.8-2+deb9u2
ii libvigraimpex6 1.10.0+git20160211.167be93+dfsg-2+b5
ii libwxbase3.0-0v5 3.0.3.1+dfsg2-1
ii libwxgtk3.0-0v5 3.0.3.1+dfsg2-1
ii make 4.1-9.1
hugin recommends no packages.
hugin suggests no packages.
- -----BEGIN PGP SIGNATURE-----
iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCWrSvDAAKCRDn6sEfJS3n
CwdyAJ0RIcoQ2pqQFuleMoLneGrrLdkMTgCeKXOUrs9M8aRVQw9EIm0W2rM8x/0=
=rJuX
- -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE-----
iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCWrSvfQAKCRDn6sEfJS3n
C2OTAJ0ddXIbBricy9VxRWiJ46usgeDsNQCeIQDNEdPZxG/RZM5LGha7tDiWczc=
=cSeG
-----END PGP SIGNATURE-----
** Affects: hugin
Importance: Undecided
Status: New
** Tags: debian
--
You received this bug notification because you are a member of Hugin
Developers, which is subscribed to Hugin.
https://bugs.launchpad.net/bugs/1758503
Title:
Fw: hugin: fails to find control-points, defective
Status in Hugin:
New
Bug description:
Begin forwarded message:
Date: Fri, 23 Mar 2018 08:38:52 +0100
From: andrew glaeser <bugs@xxxxxxxxxxxxxxxx>
To: submit@xxxxxxxxxxxxxxx
Subject: hugin: fails to find control-points, defective
- -----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Package: hugin
Version: 2018.0.0+dfsg-1+b1
Severity: important
Dear Maintainer,
the problem exists since the the stretch-release, in fact the tendency to
defectiveness of the GUI showed already with Jessie+backports, it wasn't
possible to stitch the panoramic views there using the GUI, but one had to do
it on the terminal using this instead:
> hugin_stitch_project (1) - Stitch a hugin project
With the stretch-release the situation worsened, now GUI is not workable at
all anymore, because either the order of images is wrong, so there can be no
control-points found, or otherwise cpoints are found for two images out of
three only.
I used to start off with the Assistant, then switched to the advanced view,
sharing of data between the two now also seems to be broken.
Now it is basically the same story both in the simple view, using the
Assistant or with the advanced view, that hugin is _not_workable_.
I upgraded to the version in Testing (buster):
> andrew@a68n:~$ sat install -t testing hugin
> [sudo] password for andrew:
> The following NEW packages will be installed:
> libilmbase23{a} libopenexr23{a}
> The following packages will be upgraded:
> hugin hugin-data hugin-tools libc-bin libc-l10n libc6 libwxbase3.0-0v5
> libwxgtk3.0-0v5 locales 9 packages upgraded, 2 newly installed, 0 to remove
> and 2131 not upgraded. Need to get 26.4 MB of archives. After unpacking
> 7,211 kB will be used. The following packages have unmet dependencies:
> libc6-dev : Depends: libc6 (= 2.24-11+deb9u3) but 2.27-2 is to be installed
> libc6-i386 : Depends: libc6 (= 2.24-11+deb9u3) but 2.27-2 is to be
> installed libc-dev-bin : Depends: libc6 (< 2.25) but 2.27-2 is to be
> installed open: 20; closed: 36; defer: 4; conflict:
> 4 .Internal
> error: found 2 (choice -> promotion) mappings for a single choice. Internal
> error: found 2 (choice -> promotion) mappings for a single choice. The
> following actions will resolve these dependencies:
>
> Upgrade the following packages:
> 1) libc-dev-bin [2.24-11+deb9u3 (now, stable) -> 2.27-2 (testing)]
> 2) libc6-dev [2.24-11+deb9u3 (now, stable) -> 2.27-2 (testing)]
> 3) libc6-i386 [2.24-11+deb9u3 (now, stable) -> 2.27-2 (testing)]
>
>
>
> Accept this solution? [Y/n/q/?]
> The following NEW packages will be installed:
> libilmbase23{a} libopenexr23{a}
> The following packages will be upgraded:
> hugin hugin-data hugin-tools libc-bin libc-dev-bin libc-l10n libc6
> libc6-dev libc6-i386 libwxbase3.0-0v5 libwxgtk3.0-0v5 locales
> 12 packages upgraded, 2 newly installed, 0 to remove and 2128 not upgraded.
> Need to get 32.2 MB of archives. After unpacking 10.8 MB will be used.
> Do you want to continue? [Y/n/?]
> Get: 1 http://ftp2.de.debian.org/debian buster/main amd64 libc-l10n all
> 2.27-2 [859 kB] Get: 2 http://ftp2.de.debian.org/debian buster/main amd64
> libc6-i386 amd64 2.27-2 [2,852 kB] Get: 3 http://ftp2.de.debian.org/debian
> buster/main amd64 libc-dev-bin amd64 2.27-2 [270 kB] Get: 4
> http://ftp2.de.debian.org/debian buster/main amd64 libc6-dev amd64 2.27-2
> [2,670 kB] Get: 5 http://ftp2.de.debian.org/debian buster/main amd64
> locales all 2.27-2 [3,804 kB] Get: 6 http://ftp2.de.debian.org/debian
> buster/main amd64 libc6 amd64 2.27-2 [2,904 kB] Get: 7
> http://ftp2.de.debian.org/debian buster/main amd64 libc-bin amd64 2.27-2
> [786 kB] Get: 8 http://ftp2.de.debian.org/debian buster/main amd64 hugin
> amd64 2018.0.0+dfsg-1+b1 [1,250 kB] Get: 9 http://ftp2.de.debian.org/debian
> buster/main amd64 hugin-tools amd64 2018.0.0+dfsg-1+b1 [3,141 kB] Get: 10
> http://ftp2.de.debian.org/debian buster/main amd64 hugin-data all
> 2018.0.0+dfsg-1 [7,625 kB] Get: 11 http://ftp2.de.debian.org/debian
> buster/main amd64 libilmbase23 amd64 2.2.1-2 [85.6 kB] Get: 12
> http://ftp2.de.debian.org/debian buster/main amd64 libopenexr23 amd64
> 2.2.1-4 [579 kB] Get: 13 http://ftp2.de.debian.org/debian buster/main amd64
> libwxbase3.0-0v5 amd64 3.0.3.1+dfsg2-1 [1,063 kB] Get: 14
> http://ftp2.de.debian.org/debian buster/main amd64 libwxgtk3.0-0v5 amd64
> 3.0.3.1+dfsg2-1 [4,321 kB] Fetched 32.2 MB in 7s (4,264 kB/s) Reading
> changelogs... Done apt-listchanges: Mailing root: apt-listchanges: news for
> a68n Preconfiguring packages ... (Reading database ... 479860 files and
> directories currently installed.) Preparing to
> unpack .../0-libc-l10n_2.27-2_all.deb ... Unpacking libc-l10n (2.27-2) over
> (2.24-11+deb9u3) ... Preparing to
> unpack .../1-libc6-i386_2.27-2_amd64.deb ... Unpacking libc6-i386 (2.27-2)
> over (2.24-11+deb9u3) ... Preparing to
> unpack .../2-libc-dev-bin_2.27-2_amd64.deb ... Unpacking libc-dev-bin
> (2.27-2) over (2.24-11+deb9u3) ... Preparing to
> unpack .../3-libc6-dev_2.27-2_amd64.deb ... Unpacking libc6-dev:amd64
> (2.27-2) over (2.24-11+deb9u3) ... Preparing to
> unpack .../4-locales_2.27-2_all.deb ... Unpacking locales (2.27-2) over
> (2.24-11+deb9u3) ... Preparing to unpack .../5-libc6_2.27-2_amd64.deb ...
> Checking for services that may need to be restarted... Checking init
> scripts... Unpacking libc6:amd64 (2.27-2) over (2.24-11+deb9u3) ... Setting
> up libc6:amd64 (2.27-2) ... Installing new version of config
> file /etc/ld.so.conf.d/x86_64-linux-gnu.conf ... Checking for services that
> may need to be restarted... Checking init scripts...
>
> Restarting services possibly affected by the upgrade:
> exim4: restarting...done.
> cups: restarting...done.
> cron: restarting...done.
> atd: restarting...done.
>
> Services restarted successfully.
> (Reading database ... 479934 files and directories currently installed.)
> Preparing to unpack .../libc-bin_2.27-2_amd64.deb ...
> Unpacking libc-bin (2.27-2) over (2.24-11+deb9u3) ...
> Setting up libc-bin (2.27-2) ...
> (Reading database ... 479934 files and directories currently installed.)
> Preparing to unpack .../0-hugin_2018.0.0+dfsg-1+b1_amd64.deb ...
> Unpacking hugin (2018.0.0+dfsg-1+b1) over (2016.2.0+dfsg-1) ...
> Preparing to unpack .../1-hugin-tools_2018.0.0+dfsg-1+b1_amd64.deb ...
> Unpacking hugin-tools (2018.0.0+dfsg-1+b1) over (2016.2.0+dfsg-1) ...
> Preparing to unpack .../2-hugin-data_2018.0.0+dfsg-1_all.deb ...
> Unpacking hugin-data (2018.0.0+dfsg-1) over (2016.2.0+dfsg-1) ...
> Selecting previously unselected package libilmbase23:amd64.
> Preparing to unpack .../3-libilmbase23_2.2.1-2_amd64.deb ...
> Unpacking libilmbase23:amd64 (2.2.1-2) ...
> Selecting previously unselected package libopenexr23:amd64.
> Preparing to unpack .../4-libopenexr23_2.2.1-4_amd64.deb ...
> Unpacking libopenexr23:amd64 (2.2.1-4) ...
> Preparing to unpack .../5-libwxbase3.0-0v5_3.0.3.1+dfsg2-1_amd64.deb ...
> Unpacking libwxbase3.0-0v5:amd64 (3.0.3.1+dfsg2-1) over (3.0.2+dfsg-4) ...
> Preparing to unpack .../6-libwxgtk3.0-0v5_3.0.3.1+dfsg2-1_amd64.deb ...
> Unpacking libwxgtk3.0-0v5:amd64 (3.0.3.1+dfsg2-1) over (3.0.2+dfsg-4) ...
> Processing triggers for mime-support (3.60) ...
> Processing triggers for desktop-file-utils (0.23-1) ...
> Setting up libilmbase23:amd64 (2.2.1-2) ...
> Setting up libc6-i386 (2.27-2) ...
> Processing triggers for gnome-icon-theme (3.12.0-2) ...
> Setting up libwxbase3.0-0v5:amd64 (3.0.3.1+dfsg2-1) ...
> Processing triggers for libc-bin (2.27-2) ...
> Setting up libc-l10n (2.27-2) ...
> Setting up hugin-data (2018.0.0+dfsg-1) ...
> Processing triggers for man-db (2.7.6.1-2) ...
> Processing triggers for shared-mime-info (1.8-1) ...
> Unknown media type in type 'all/all'
> Unknown media type in type 'all/allfiles'
> Setting up libc-dev-bin (2.27-2) ...
> Processing triggers for gnome-menus (3.13.3-9) ...
> Setting up libc6-dev:amd64 (2.27-2) ...
> Setting up locales (2.27-2) ...
> Installing new version of config file /etc/locale.alias ...
> Generating locales (this might take a while)...
> en_GB.UTF-8... done
> Generation complete.
> Setting up libopenexr23:amd64 (2.2.1-4) ...
> Setting up libwxgtk3.0-0v5:amd64 (3.0.3.1+dfsg2-1) ...
> Setting up hugin-tools (2018.0.0+dfsg-1+b1) ...
> Setting up hugin (2018.0.0+dfsg-1+b1) ...
> Processing triggers for libc-bin (2.27-2) ...
>
> Current status: 2129 (-11) upgradable.
- - -- System Information:
Debian Release: 9.4
APT prefers stable-updates
APT policy: (500, 'stable-updates'), (500, 'stable'), (52, 'testing')
Architecture: amd64 (x86_64)
Kernel: Linux 4.14.13-ad-bpo (SMP w/3 CPU cores)
Locale: LANG=en_GB.UTF-8, LC_CTYPE=en_GB.UTF-8 (charmap=UTF-8),
LANGUAGE=en_GB:en (charmap=UTF-8) Shell: /bin/sh linked to /bin/dash
Init: systemd (via /run/systemd/system)
Versions of packages hugin depends on:
ii enblend 4.2-2
ii enfuse 4.2-2
ii hugin-tools 2018.0.0+dfsg-1+b1
ii libc6 2.27-2
ii libexiv2-14 0.25-3.1
ii libfftw3-double3 3.3.5-3
ii libgcc1 1:6.3.0-18+deb9u1
ii libgl1-mesa-glx [libgl1] 13.0.6-1+b2
ii libglew2.0 2.0.0-3+b1
ii libglu1-mesa [libglu1] 9.0.0-2.1
ii libgomp1 6.3.0-18+deb9u1
ii libimage-exiftool-perl 10.40-1
ii liblcms2-2 2.8-4
ii libpano13-3 2.9.19+dfsg-2+b2
ii libsqlite3-0 3.16.2-5+deb9u1
ii libstdc++6 6.3.0-18+deb9u1
ii libtiff5 4.0.8-2+deb9u2
ii libvigraimpex6 1.10.0+git20160211.167be93+dfsg-2+b5
ii libwxbase3.0-0v5 3.0.3.1+dfsg2-1
ii libwxgtk3.0-0v5 3.0.3.1+dfsg2-1
ii make 4.1-9.1
hugin recommends no packages.
hugin suggests no packages.
- -----BEGIN PGP SIGNATURE-----
iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCWrSvDAAKCRDn6sEfJS3n
CwdyAJ0RIcoQ2pqQFuleMoLneGrrLdkMTgCeKXOUrs9M8aRVQw9EIm0W2rM8x/0=
=rJuX
- -----END PGP SIGNATURE-----
-----BEGIN PGP SIGNATURE-----
iF0EARECAB0WIQTF9uNaslvnJpWt8kXn6sEfJS3nCwUCWrSvfQAKCRDn6sEfJS3n
C2OTAJ0ddXIbBricy9VxRWiJ46usgeDsNQCeIQDNEdPZxG/RZM5LGha7tDiWczc=
=cSeG
-----END PGP SIGNATURE-----
To manage notifications about this bug go to:
https://bugs.launchpad.net/hugin/+bug/1758503/+subscriptions
Follow ups
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: tmodes, 2018-05-14
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: andrew glaeser, 2018-05-14
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: tmodes, 2018-04-13
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: andrew glaeser, 2018-04-13
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: tmodes, 2018-03-27
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: andrew glaeser, 2018-03-27
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: tmodes, 2018-03-24
-
[Bug 1758503] Re: Fw: hugin: fails to find control-points, defective
From: andrew glaeser, 2018-03-24
