hybrid-graphics-linux team mailing list archive

[Micah Chambers <micahc.vt@xxxxxxxxx>]

Using vnc seems like it would induce some lag or cpu cycles. Whats the
performance like?

Also on a related note, I use Arch, and since libgl gets packaged with with
the nvidia proprietary modules now, I'm guessing I would need to find a way
to install both the open source libgl and the nvidia one? Thanks
-Micah

On Tue, May 3, 2011 at 12:01 PM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:

> I will keep the howto and todo list updated here:
>
> http://www.martin-juhl.dk/2011/05/optimus-on-linux-problem-solved/
>
>
> ------------------------------
> *Fra: *"Martin Juhl" <mj@xxxxxxxxxxxx>
> *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
> *Sendt: *tirsdag, 3. maj 2011 18:42:20
> *Emne: *[Hybrid-graphics-linux] Optimus Solution found!!!! Using my Nvidia
> card in my Alienware M11X R2!!!
>
>
> Hi all..
>
> I have found a way to use the nvidia card in machines WITHOUT the optimus
> mux...
>
> There are still a few flaws... but in my regard they are few...
>
> First of all I have this running on my Alienware M11X R2, on Ubuntu Natty
> 11.04 64-bit.. And haven't tried it on any other configurations.. so I hope
> you can report back, if it works on other laptops (it should) and other
> distributions....
>
> Here it goes:
>
> First of all download the following:
>
> General:
>
> http://www.martin-juhl.dk/optimus/xorg.conf
>
>
> 32-bit deb-based:
>
> http://www.martin-juhl.dk/optimus/turbojpeg_1.11.1_i386.deb
>
> http://www.martin-juhl.dk/optimus/VirtualGL_2.2.1_i386.deb
>
>
> 64-bit deb-based:
>
> http://www.martin-juhl.dk/optimus/turbojpeg_1.11.1_amd64.deb
>
> http://www.martin-juhl.dk/optimus/VirtualGL_2.2.1_amd64.deb
>
>
> 32-bit rpm-based:
>
> http://www.martin-juhl.dk/optimus/turbojpeg-1.11.i386.rpm
>
> http://www.martin-juhl.dk/optimus/VirtualGL-2.2.1.i386.rpm
>
>
> 64-bit rpm-based:
>
> http://www.martin-juhl.dk/optimus/turbojpeg-1.11.x86_64.rpm
>
> http://www.martin-juhl.dk/optimus/VirtualGL-2.2.1.x86_64.rpm
>
>
> Source:
>
> http://www.martin-juhl.dk/optimus/turbojpeg-ipp-1.11.1.tar.gz
>
> http://www.martin-juhl.dk/optimus/VirtualGL-2.2.1.tar.gz
>
>
> Files can also be found here:
>
> http://sourceforge.net/projects/virtualgl/files/
>
>
> Ok... Installation:
>
> Start by installing the nvidia driver:
>
> sudo aptitude install nvidia-current     (ubuntu)
>
> then put the xorg.conf in /etc/X11/
>
> after that, install the two files you downloaded above:
>
> sudo dpkg -i turbojpeg*  VirtualGL*        (deb)
>
> or
>
> sudo rpm -ihv turbojpeg*  VirtualGL*     (rpm)
>
>
> Now run:
>
> sudo vglserver_config
>
> answer as below:
>
> 1) Configure server for use with VirtualGL in GLX mode
> 2) Unconfigure server for use with VirtualGL in GLX mode
> X) Exit
>
> Choose:
> 1
>
> Restrict 3D X server access to vglusers group
> (recommended)?
>
> [Y/n]
>
> n
>
>
>
> Restrict framebuffer device access to vglusers group
> (recommended)?
>
> [Y/n]
>
> n
>
>
>
> Disable XTEST extension
> (recommended)?
>
> [Y/n]
> y
>
> ... Creating /etc/modprobe.d/virtualgl.conf to set requested permissions
> for
>
>     /dev/nvidia* ...
> ... Attempting to remove nvidia module from memory so device permissions
>     will be reloaded ...
> ERROR: Module nvidia is in use
> ... Granting write permission to /dev/nvidia0 /dev/nvidiactl for all users
> ...
> ... Modifying /etc/X11/xorg.conf to enable DRI permissions for
>     all users ...
> ... Adding xhost +LOCAL: to /etc/kde4/kdm/Xsetup script ...
> ... Disabling XTEST extension in /etc/kde4/kdm/kdmrc ...
>
> Done. You must restart the display manager for the changes to take effect.
>
> IMPORTANT NOTE: Your system uses modprobe.d to set device permissions. You
> must execute rmmod nvidia with the display manager stopped in order for the
> new device permission settings to become effective.
>
>
> 1) Configure server for use with VirtualGL in GLX mode
> 2) Unconfigure server for use with VirtualGL in GLX mode
> X) Exit
>
> Choose:
> x
>
>
> Then:
>
> append the following two lines to /etc/profile
>
> VGL_DISPLAY=:0.1
> export VGL_DISPLAY
>
>
> and reboot...
>
> Hopefully your computer comes back up..
>
> now you should be able to start applications with:
>
> vglrun <application>
>
> and the nvidia card will be used for acceleration..
>
> btw. <application> needs to contain the full path to the application if not
> in the path...
>
> It is still the Intel card running the rest.. and for now I haven't found a
> way to activate acceleration for both cards.. so no fancy compiz effects..
> but thats no problem for me, as long as I can use my nvidia card for gaming
> :D...
>
> Hope this will help someone..
>
>
> /MrMEEE aka Martin Juhl...
>
> _______________________________________________
> Mailing list: https://launchpad.net/~hybrid-graphics-linux
> Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
> More help   : https://help.launchpad.net/ListHelp
>
> _______________________________________________
> Mailing list: https://launchpad.net/~hybrid-graphics-linux
> Post to     : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
> More help   : https://help.launchpad.net/ListHelp
>
>