hybrid-graphics-linux team mailing list archive
-
hybrid-graphics-linux team
-
Mailing list archive
-
Message #01018
Re: Optimus Solution found!!!! Using my Nvidia card in my Alienware M11X R2!!!
Hi people,
I managed to use Martin solution with an external monitor. I followed the
how to but I still cant run vglrun glxgears ([VGL] ERROR: Could not open
display :0.1.) I tried solution CRT-0, DFP-0. nothing. Ill post my
xorg.conf and my xorg.log. Thanks for all.
On Fri, May 6, 2011 at 11:06 AM, David Mackenzie <dmackenz1981@xxxxxxxxx>wrote:
> Hi Martin and other Optimus people,
>
> First, a big thank you to Martin for this solution. I have my external
> Samsung monitor working with nvidia proprietry drivers on Ubuntu 11.04 with
> gnome and compiz 3d effects working using this solution, however, I am
> unable to get any display on my laptop LVDS. I have tried hacking around
> with various xorg configs but can't get any output on the laptop screen.
>
> Does anyone have dual screen working? If so, what is your xorg config?
>
> For the record I have the following hardware:
>
> Dell XPS L502X with:
>
> a) 2nd generation Intel® Core? i5-2410M processor 2.30 GHz with Turbo Boost
> 2.0 up to 2.90 GHz PCI:0:2:0
> b) 2GB NVIDIA® GeForce® GT 540M graphics with Optimus PCI:1:0:0
>
> Thanks everyone for your efforts so far. As someone else said, we all owe
> Martin a beer.
>
> Cheers,
> Dave.
>
>
>
> On 6 May 2011 02:59, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>
>> Hi..
>>
>> What are you using for testing...
>>
>> I'm using glxgears and getting:
>>
>> ~ 1700 fps with libjpeg-turbo
>>
>> 7362 frames in 5.0 seconds = 1472.247 FPS
>> 6651 frames in 5.0 seconds = 1330.055 FPS
>> 6507 frames in 5.0 seconds = 1301.198 FPS
>> 9399 frames in 5.0 seconds = 1879.629 FPS
>> 9519 frames in 5.0 seconds = 1903.788 FPS
>> 8857 frames in 5.0 seconds = 1771.247 FPS
>> 9524 frames in 5.0 seconds = 1904.607 FPS
>> 8545 frames in 5.0 seconds = 1708.921 FPS
>> 9485 frames in 5.0 seconds = 1896.910 FPS
>> 9495 frames in 5.0 seconds = 1898.814 FPS
>>
>> ~ 1600 fps with turbojpeg
>>
>> 6580 frames in 5.0 seconds = 1315.794 FPS
>> 7177 frames in 5.0 seconds = 1435.397 FPS
>> 9346 frames in 5.0 seconds = 1869.135 FPS
>> 8206 frames in 5.0 seconds = 1641.097 FPS
>> 6429 frames in 5.0 seconds = 1285.784 FPS
>> 7006 frames in 5.0 seconds = 1401.094 FPS
>> 6229 frames in 5.0 seconds = 1245.770 FPS
>> 7559 frames in 5.0 seconds = 1511.768 FPS
>> 8541 frames in 5.0 seconds = 1708.090 FPS
>> 8503 frames in 5.0 seconds = 1700.564 FPS
>> 8501 frames in 5.0 seconds = 1700.139 FPS
>> 8540 frames in 5.0 seconds = 1707.930 FPS
>>
>>
>> ~ 1900 fps with none of them installed
>>
>> 7621 frames in 5.0 seconds = 1524.158 FPS
>> 9526 frames in 5.0 seconds = 1905.055 FPS
>> 9504 frames in 5.0 seconds = 1900.725 FPS
>> 9487 frames in 5.0 seconds = 1897.317 FPS
>> 9419 frames in 5.0 seconds = 1883.613 FPS
>> 8754 frames in 5.0 seconds = 1750.718 FPS
>> 9435 frames in 5.0 seconds = 1886.882 FPS
>> 9400 frames in 5.0 seconds = 1879.999 FPS
>> 9408 frames in 5.0 seconds = 1881.523 FPS
>>
>>
>> ~ 1600 fps with xuv
>>
>> 7888 frames in 5.0 seconds = 1577.544 FPS
>> 7906 frames in 5.0 seconds = 1581.168 FPS
>> 7963 frames in 5.0 seconds = 1592.556 FPS
>> 8090 frames in 5.0 seconds = 1617.894 FPS
>> 8122 frames in 5.0 seconds = 1624.336 FPS
>> 8204 frames in 5.0 seconds = 1640.684 FPS
>> 8377 frames in 5.0 seconds = 1675.184 FPS
>> 8288 frames in 5.0 seconds = 1657.548 FPS
>> 8399 frames in 5.0 seconds = 1679.671 FPS
>>
>> /Martin
>>
>> ------------------------------
>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>> *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> *Sendt: *torsdag, 5. maj 2011 17:23:31
>>
>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using my
>> Nvidia card in my Alienware M11X R2!!!
>>
>> Look my tests with libjpeg-turbo and turbojpeg-ipp:
>>
>>
>> 1) libjpeg-turbo-1.1.0:
>>
>> I got around 170fps without VGL_COMPRESS and around 130fps with
>> VGL_COMPRESS=jpeg.
>>
>> 2) turbojpeg-ipp-1.11.1:
>>
>> I got around 290fps without VGL_COMPRESS and around 350fps with
>> VGL_COMPRESS=jpeg.
>>
>> My hardware:
>>
>> Asus Eeepc1215N,
>>
>> 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated
>> Graphics Controller (rev 02)
>> 04:00.0 VGA compatible controller: nVidia Corporation Device 0a76 (rev a2)
>>
>> NVIDIA ION2 Optimus.
>>
>> Att,
>>
>> Ellington Santos
>>
>>
>> On Thu, May 5, 2011 at 11:31 AM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>
>>> Sry... Fixed...
>>>
>>>
>>>
>>>
>>> ------------------------------
>>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>>> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>> *Sendt: *torsdag, 5. maj 2011 16:15:14
>>>
>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using my
>>> Nvidia card in my Alienware M11X R2!!!
>>>
>>> Martin, my name is Ellington Santos. It isn't Santos Ellington. ;-)
>>>
>>> On Thu, May 5, 2011 at 10:54 AM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>>
>>>> Great...
>>>>
>>>> Thanks for your feedback
>>>>
>>>>
>>>>
>>>> Med venlig hilsen
>>>>
>>>> Martin Juhl
>>>> IT-konsulent
>>>> *T:* (+45) 70 20 10 63
>>>> M: (+45) 27 52 46 58
>>>> CASALOGIC A/S
>>>>
>>>> Besøg os på
>>>> www.casalogic.dk
>>>>
>>>>
>>>>
>>>> ------------------------------
>>>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>>>> *Til: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>>> *Cc: *"peter" <peter@xxxxxxxxxx>,
>>>> hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>> *Sendt: *torsdag, 5. maj 2011 02:53:17
>>>>
>>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using my
>>>> Nvidia card in my Alienware M11X R2!!!
>>>>
>>>> It worked with Option "ConnectedMonitor" "DFP-0".
>>>>
>>>> I attached my xorg.conf and Xorg.0.log. I swaped screen 0 and 1 to use
>>>> intel as first screen.
>>>>
>>>> By the way, my netbook is a Acer EeePC 1215N.
>>>>
>>>>
>>>> On Wed, May 4, 2011 at 6:51 PM, Martin Juhl <mj@xxxxxxxxxxxx> wrote:
>>>>
>>>>> If that doesn't work...
>>>>>
>>>>> You can try:
>>>>>
>>>>> Option "ConnectedMonitor" "CRT"
>>>>>
>>>>> or
>>>>>
>>>>> Option "UseDisplayDevice" "none"
>>>>>
>>>>> instead...
>>>>>
>>>>>
>>>>>
>>>>> ------------------------------
>>>>> *Fra: *"Martin Juhl" <mj@xxxxxxxxxxxx>
>>>>> *Til: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>, "peter" <
>>>>> peter@xxxxxxxxxx>
>>>>>
>>>>> *Cc: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>> *Sendt: *onsdag, 4. maj 2011 23:49:03
>>>>>
>>>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using
>>>>> my Nvidia card in my Alienware M11X R2!!!
>>>>>
>>>>> Hi Santos and Peter..
>>>>>
>>>>> I think you guys have the same problem..
>>>>>
>>>>> Could you try the following:
>>>>>
>>>>> Add:
>>>>>
>>>>> Option "ConnectedMonitor" "CRT-0"
>>>>>
>>>>> to your nvidia device:
>>>>>
>>>>> Section "Device"
>>>>> Identifier "Device1"
>>>>> Driver "nvidia"
>>>>> VendorName "NVIDIA Corporation"
>>>>> BusID "PCI:1:0:0"
>>>>> Option "IgnoreEDID"
>>>>> Option "ConnectedMonitor" "CRT-0"
>>>>> #Screen 0
>>>>> EndSection
>>>>>
>>>>> Santos: You might need to change your BusID as well to BusID
>>>>> "PCI:1:0:0"...
>>>>>
>>>>> Please report back...
>>>>>
>>>>> ------------------------------
>>>>> *Fra: *"Ellington Santos" <ellington@xxxxxxxxxxxxx>
>>>>> *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>> *Sendt: *onsdag, 4. maj 2011 23:31:14
>>>>> *Emne: *Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using
>>>>> my Nvidia card in my Alienware M11X R2!!!
>>>>>
>>>>> I've got the same error.
>>>>>
>>>>> Look Xorg.0.log lines referent to nvidia:
>>>>>
>>>>> [ 35340.269] (II) Module glx: vendor="NVIDIA Corporation"
>>>>> [ 35340.269] (II) NVIDIA GLX Module 260.19.29 Wed Dec 8 12:25:40 PST
>>>>> 2010
>>>>> [ 35340.272] (II) LoadModule: "nvidia"
>>>>> [ 35340.273] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
>>>>> [ 35340.273] (II) Module nvidia: vendor="NVIDIA Corporation"
>>>>> [ 35340.276] (II) NVIDIA dlloader X Driver 260.19.29 Wed Dec 8
>>>>> 12:10:28 PST 2010
>>>>> [ 35340.276] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
>>>>> [ 35340.298] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
>>>>> [ 35340.298] (==) NVIDIA(0): RGB weight 888
>>>>> [ 35340.298] (==) NVIDIA(0): Default visual is TrueColor
>>>>> [ 35340.298] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
>>>>> [ 35340.298] (**) NVIDIA(0): Enabling RENDER acceleration
>>>>> [ 35340.298] (II) NVIDIA(0): Support for GLX with the Damage and
>>>>> Composite X extensions is
>>>>> [ 35340.299] (II) NVIDIA(0): enabled.
>>>>> [ 35340.579] (II) NVIDIA(0): NVIDIA GPU ION (GT218) at PCI:4:0:0
>>>>> (GPU-0)
>>>>> [ 35340.579] (--) NVIDIA(0): Memory: 524288 kBytes
>>>>> [ 35340.580] (--) NVIDIA(0): VideoBIOS: 70.18.82.00.0b
>>>>> [ 35340.580] (II) NVIDIA(0): Detected PCI Express Link width: 1X
>>>>> [ 35340.580] (--) NVIDIA(0): Interlaced video modes are supported on
>>>>> this GPU
>>>>> [ 35340.580] (--) NVIDIA(0): Connected display device(s) on ION at
>>>>> PCI:4:0:0
>>>>> [ 35340.580] (--) NVIDIA(0): none
>>>>> [ 35340.581] (EE) NVIDIA(0): No display devices found for this X
>>>>> screen.
>>>>> [ 35340.661] (II) UnloadModule: "nvidia"
>>>>> [ 35340.703] (EE) Failed to initialize GLX extension (Compatible NVIDIA
>>>>> X driver not found)
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> On Wed, May 4, 2011 at 5:57 PM, Flat6 <flat6@xxxxxxxxxxxxxx> wrote:
>>>>>
>>>>>> Hi all,
>>>>>>
>>>>>> After some tests ( i'm quite a nob), I have the same message
>>>>>>
>>>>>>
>>>>>> reports: [VGL] ERROR: Could not open display :0.1.
>>>>>>
>>>>>> But I think PCI buses are correctly matched in the Xorg file.....
>>>>>>
>>>>>> I tried to launch vglrun glxgears
>>>>>>
>>>>>> CU,
>>>>>>
>>>>>> Flat6
>>>>>>
>>>>>> -------- Message initial --------
>>>>>> *De*: Peter Liedler <peter@xxxxxxxxxx<Peter%20Liedler%20%3cpeter@xxxxxxxxxx%3e>
>>>>>> >
>>>>>> *Reply-to*: peter@xxxxxxxxxx
>>>>>>
>>>>>> *À*: Luis Zaldivar <luis.zaldivar@xxxxxxxxx<Luis%20Zaldivar%20%3cluis.zaldivar@xxxxxxxxx%3e>
>>>>>> >
>>>>>> *Cc*: hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> *Sujet*: Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using
>>>>>> my Nvidia card in my Alienware M11X R2!!!
>>>>>> *Date*: Tue, 3 May 2011 23:07:55 +0200
>>>>>>
>>>>>>
>>>>>> Hi Luis,
>>>>>>
>>>>>> I've checked:
>>>>>>
>>>>>> lspci | grep VGA
>>>>>> 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated
>>>>>> Graphics Controller (rev 18)
>>>>>> 01:00.0 VGA compatible controller: nVidia Corporation GT218 [GeForce 310M]
>>>>>> (rev a2)
>>>>>>
>>>>>> cat /etc/X11/xorg.conf | grep PCI
>>>>>> BusID "PCI:1:0:0"
>>>>>> BusID "PCI:0:2:0"
>>>>>>
>>>>>> Section "Device"
>>>>>> Identifier "Device1"
>>>>>> Driver "nvidia"
>>>>>> VendorName "NVIDIA Corporation"
>>>>>> BusID "PCI:1:0:0"
>>>>>> Option "IgnoreEDID"
>>>>>> #Screen 0
>>>>>> EndSection
>>>>>>
>>>>>> Section "Device"
>>>>>> Identifier "Device0"
>>>>>> Driver "intel"
>>>>>> VendorName "onboard"
>>>>>> BusID "PCI:0:2:0"
>>>>>> #Screen 1
>>>>>> EndSection
>>>>>>
>>>>>> I even stopped the display manager and reconfigured vgl_config, then rebooted.
>>>>>> Should work in my opinion. Am I missing something?
>>>>>> Peter
>>>>>>
>>>>>> Am Dienstag, 3. Mai 2011, 22:48:19 schrieb Luis Zaldivar:
>>>>>> > Peter
>>>>>> >
>>>>>> > I had the same issue
>>>>>> >
>>>>>> > You must match the PCI buses to the xorg.conf ones
>>>>>> >
>>>>>> > run lspci | grep VGA
>>>>>> >
>>>>>> > $ lspci | grep VGA
>>>>>> > 00:02.0 VGA compatible controller: Intel Corporation Core Processor
>>>>>> > Integrated Graphics Controller (rev 18)
>>>>>> > 02:00.0 VGA compatible controller: nVidia Corporation Device 0df1 (rev a1)
>>>>>> >
>>>>>> > and modify the xorg file with those numbers
>>>>>> >
>>>>>> > ~$ fgrep "PCI" /etc/X11/xorg.conf
>>>>>> > BusID "PCI:2:0:0"
>>>>>> > BusID "PCI:0:2:0"
>>>>>> >
>>>>>> > On 03/05/11 15:38, Peter Liedler wrote:
>>>>>> > > Hi there,
>>>>>> > >
>>>>>> > > after all, this is great news! Thank you for this solution.
>>>>>> > >
>>>>>> > > I am running Kubuntu natty 11.04 64bit.
>>>>>> > > The installation was absolutely smooth and worked as in described in the
>>>>>> > > HOWTO.
>>>>>> > > Still, for some reason, the display export does not work here. I appended
>>>>>> > > the two lines to my /etc/profile and rebooted. System comes up with gui
>>>>>> > > (kde). But running applications with e.g.
>>>>>> > > vglrun ./pslaunch
>>>>>> > >
>>>>>> > > reports: [VGL] ERROR: Could not open display :0.1.
>>>>>> > >
>>>>>> > > What have I missed?
>>>>>> > >
>>>>>> > > peter
>>>>>> > >
>>>>>> > > Am Dienstag, 3. Mai 2011, 21:36:31 schrieb Martin Juhl:
>>>>>> > >> Hi..
>>>>>> > >>
>>>>>> > >> I haven't found the MUX.. as far as I can tell the M11X doesn't have a
>>>>>> > >> mux.. this solution actually works the way optimus is meant to work.. by
>>>>>> > >> using the intel card to disable everything, and only offload though
>>>>>> > >> stuff to the Nvidia card...
>>>>>> > >>
>>>>>> > >> I discovered that the never versions of the nvidia driver allowed me to
>>>>>> > >> create a virtual screen on the nvidia card.. and worked my way from
>>>>>> > >> there...
>>>>>> > >>
>>>>>> > >> /Martin
>>>>>> > >>
>>>>>> > >>
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> Fra: "Matthew Chambers"<chambers3000@xxxxxxxxx>
>>>>>> > >> Til: "Martin Juhl"<mj@xxxxxxxxxxxx>
>>>>>> > >> Sendt: tirsdag, 3. maj 2011 21:28:44
>>>>>> > >> Emne: Re: [Hybrid-graphics-linux] Optimus Solution found!!!! Using my
>>>>>> > >> Nvidia card in my Alienware M11X R2!!!
>>>>>> > >>
>>>>>> > >> Can you tell me how you identified the card MUX. I am a little confused
>>>>>> > >> or point to a link. I have a Asus NV61J with the 325M optimus Nvidia
>>>>>> > >> card. But when I looked into the specs of your machine you also have an
>>>>>> > >> Optimus "enabled". As a side note I love using linux and was wondering
>>>>>> > >> if there is anything I should read to be more proficient like you are
>>>>>> > >> with this kind of stuff.
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> On Tue, May 3, 2011 at 11:42 AM, Martin Juhl< mj@xxxxxxxxxxxx> wrote:
>>>>>> > >>
>>>>>> > >>
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> Hi all..
>>>>>> > >>
>>>>>> > >> I have found a way to use the nvidia card in machines WITHOUT the
>>>>>> > >> optimus mux...
>>>>>> > >>
>>>>>> > >> There are still a few flaws... but in my regard they are few...
>>>>>> > >>
>>>>>> > >> First of all I have this running on my Alienware M11X R2, on Ubuntu
>>>>>> > >> Natty 11.04 64-bit.. And haven't tried it on any other configurations..
>>>>>> > >> so I hope you can report back, if it works on other laptops (it should)
>>>>>> > >> and other distributions....
>>>>>> > >>
>>>>>> > >> Here it goes:
>>>>>> > >>
>>>>>> > >> First of all download the following:
>>>>>> > >>
>>>>>> > >> General:
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/xorg.conf
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> 32-bit deb-based:
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg_1.11.1_i386.deb
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/ VirtualGL_2.2.1_i386.deb
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> 64-bit deb-based:
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg_1.11.1_amd64.deb
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/VirtualGL_2.2.1_amd64.deb
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> 32-bit rpm-based:
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg-1.11.i386.rpm
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/VirtualGL-2.2.1.i386.rpm
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> 64-bit rpm-based:
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg-1.11.x86_64.rpm
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/ VirtualGL-2.2.1.x86_64.rpm
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> Source:
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/turbojpeg-ipp-1.11.1.tar.gz
>>>>>> > >>
>>>>>> > >> http://www.martin-juhl.dk/optimus/ VirtualGL-2.2.1.tar.gz
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> Files can also be found here:
>>>>>> > >>
>>>>>> > >> http://sourceforge.net/projects/virtualgl/files/
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> Ok... Installation:
>>>>>> > >>
>>>>>> > >> Start by installing the nvidia driver:
>>>>>> > >>
>>>>>> > >> sudo aptitude install nvidia-current (ubuntu)
>>>>>> > >>
>>>>>> > >> then put the xorg.conf in /etc/X11/
>>>>>> > >>
>>>>>> > >> after that, install the two files you downloaded above:
>>>>>> > >>
>>>>>> > >> sudo dpkg -i turbojpeg* VirtualGL* (deb)
>>>>>> > >>
>>>>>> > >> or
>>>>>> > >>
>>>>>> > >> sudo rpm -ihv turbojpeg* VirtualGL* (rpm)
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> Now run:
>>>>>> > >>
>>>>>> > >> sudo vglserver_config
>>>>>> > >>
>>>>>> > >> answer as below:
>>>>>> > >>
>>>>>> > >> 1) Configure server for use with VirtualGL in GLX mode
>>>>>> > >> 2) Unconfigure server for use with VirtualGL in GLX mode
>>>>>> > >> X) Exit
>>>>>> > >>
>>>>>> > >> Choose:
>>>>>> > >> 1
>>>>>> > >>
>>>>>> > >> Restrict 3D X server access to vglusers group (recommended)?
>>>>>> > >> [Y/n]
>>>>>> > >> n
>>>>>> > >>
>>>>>> > >> Restrict framebuffer device access to vglusers group (recommended)?
>>>>>> > >> [Y/n]
>>>>>> > >> n
>>>>>> > >>
>>>>>> > >> Disable XTEST extension (recommended)?
>>>>>> > >> [Y/n]
>>>>>> > >> y
>>>>>> > >> ... Creating /etc/modprobe.d/virtualgl.conf to set requested permissions
>>>>>> > >> for /dev/nvidia* ...
>>>>>> > >> ... Attempting to remove nvidia module from memory so device permissions
>>>>>> > >> will be reloaded ...
>>>>>> > >> ERROR: Module nvidia is in use
>>>>>> > >> ... Granting write permission to /dev/nvidia0 /dev/nvidiactl for all
>>>>>> > >> users ... ... Modifying /etc/X11/xorg.conf to enable DRI permissions
>>>>>> > >> for all users ...
>>>>>> > >> ... Adding xhost +LOCAL: to /etc/kde4/kdm/Xsetup script ...
>>>>>> > >> ... Disabling XTEST extension in /etc/kde4/kdm/kdmrc ...
>>>>>> > >>
>>>>>> > >> Done. You must restart the display manager for the changes to take
>>>>>> > >> effect.
>>>>>> > >>
>>>>>> > >> IMPORTANT NOTE: Your system uses modprobe.d to set device permissions.
>>>>>> > >> You must execute rmmod nvidia with the display manager stopped in order
>>>>>> > >> for the new device permission settings to become effective.
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> 1) Configure server for use with VirtualGL in GLX mode
>>>>>> > >> 2) Unconfigure server for use with VirtualGL in GLX mode
>>>>>> > >> X) Exit
>>>>>> > >>
>>>>>> > >> Choose:
>>>>>> > >> x
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> Then:
>>>>>> > >>
>>>>>> > >> append the following two lines to /etc/profile
>>>>>> > >>
>>>>>> > >> VGL_DISPLAY=:0.1
>>>>>> > >> export VGL_DISPLAY
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> and reboot...
>>>>>> > >>
>>>>>> > >> Hopefully your computer comes back up..
>>>>>> > >>
>>>>>> > >> now you should be able to start applications with:
>>>>>> > >>
>>>>>> > >> vglrun<application>
>>>>>> > >>
>>>>>> > >> and the nvidia card will be used for acceleration..
>>>>>> > >>
>>>>>> > >> btw.<application> needs to contain the full path to the application if
>>>>>> > >> not in the path...
>>>>>> > >>
>>>>>> > >> It is still the Intel card running the rest.. and for now I haven't
>>>>>> > >> found a way to activate acceleration for both cards.. so no fancy
>>>>>> > >> compiz effects.. but thats no problem for me, as long as I can use my
>>>>>> > >> nvidia card for gaming :D...
>>>>>> > >>
>>>>>> > >> Hope this will help someone..
>>>>>> > >>
>>>>>> > >>
>>>>>> > >> /MrMEEE aka Martin Juhl...
>>>>>> > >>
>>>>>> > >> _______________________________________________
>>>>>> > >> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>> > >> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> > >> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>> > >> More help : https://help.launchpad.net/ListHelp
>>>>>> > >
>>>>>> > > _______________________________________________
>>>>>> > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>> > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>> > > More help : https://help.launchpad.net/ListHelp
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>>
>>>>>>
>>>>>
>>>>> _______________________________________________
>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>
>>>>> _______________________________________________
>>>>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>>>>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>>>>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>>>>> More help : https://help.launchpad.net/ListHelp
>>>>>
>>>>
>>>>
>>>
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> More help : https://help.launchpad.net/ListHelp
>>
>> _______________________________________________
>> Mailing list: https://launchpad.net/~hybrid-graphics-linux
>> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
>> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
>> More help : https://help.launchpad.net/ListHelp
>>
>>
>
> _______________________________________________
> Mailing list: https://launchpad.net/~hybrid-graphics-linux
> Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
> Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
> More help : https://help.launchpad.net/ListHelp
>
>
--
Luis Zapata Ortiz
Molecular Biotechnology Engineering
Laboratory of Bioinformatics and Mathematics of the Genome, LBMG.
Center of Mathematical Modeling of the University of Chile.
Av. Blanco Encalada 2120
56-2-9784551
Attachment:
xorg.conf
Description: Binary data
[ 32.365]
X.Org X Server 1.10.1
Release Date: 2011-04-15
[ 32.365] X Protocol Version 11, Revision 0
[ 32.365] Build Operating System: Linux 2.6.24-29-server x86_64 Ubuntu
[ 32.365] Current Operating System: Linux luisgls-pc 2.6.38-8-generic #42-Ubuntu SMP Mon Apr 11 03:31:24 UTC 2011 x86_64
[ 32.365] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.38-8-generic root=UUID=8ca939b5-24f6-4e22-a569-baabef9010be ro quiet splash vt.handoff=7
[ 32.365] Build Date: 19 April 2011 03:40:45PM
[ 32.365] xorg-server 2:1.10.1-1ubuntu1 (For technical support please see http://www.ubuntu.com/support)
[ 32.365] Current version of pixman: 0.20.2
[ 32.365] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 32.365] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 32.365] (==) Log file: "/var/log/Xorg.0.log", Time: Fri May 6 10:56:42 2011
[ 32.365] (==) Using config file: "/etc/X11/xorg.conf"
[ 32.365] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 32.365] (==) ServerLayout "Layout0"
[ 32.365] (**) |-->Screen "Screen0" (0)
[ 32.365] (**) | |-->Monitor "Monitor0"
[ 32.365] (**) | |-->Device "Device0"
[ 32.365] (**) |-->Screen "Screen1" (1)
[ 32.365] (**) | |-->Monitor "Monitor0"
[ 32.366] (**) | |-->Device "Device1"
[ 32.366] (**) |-->Input Device "Keyboard0"
[ 32.366] (**) |-->Input Device "Mouse0"
[ 32.366] (==) Automatically adding devices
[ 32.366] (==) Automatically enabling devices
[ 32.366] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 32.366] Entry deleted from font path.
[ 32.366] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType,
built-ins
[ 32.366] (==) ModulePath set to "/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 32.366] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 32.366] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 32.366] (WW) Disabling Keyboard0
[ 32.366] (WW) Disabling Mouse0
[ 32.366] (II) Loader magic: 0x7e0280
[ 32.366] (II) Module ABI versions:
[ 32.366] X.Org ANSI C Emulation: 0.4
[ 32.366] X.Org Video Driver: 10.0
[ 32.366] X.Org XInput driver : 12.3
[ 32.366] X.Org Server Extension : 5.0
[ 32.367] (--) PCI:*(0:0:2:0) 8086:0046:1028:044d rev 18, Mem @ 0xfa400000/4194304, 0xb0000000/268435456, I/O @ 0x0000f080/8
[ 32.367] (--) PCI: (0:1:0:0) 10de:0a75:1028:044d rev 162, Mem @ 0xf9000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 32.367] (II) Open ACPI successful (/var/run/acpid.socket)
[ 32.367] (II) LoadModule: "extmod"
[ 32.408] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 32.408] (II) Module extmod: vendor="X.Org Foundation"
[ 32.408] compiled for 1.10.1, module version = 1.0.0
[ 32.408] Module class: X.Org Server Extension
[ 32.408] ABI class: X.Org Server Extension, version 5.0
[ 32.408] (II) Loading extension MIT-SCREEN-SAVER
[ 32.408] (II) Loading extension XFree86-VidModeExtension
[ 32.408] (II) Loading extension XFree86-DGA
[ 32.408] (II) Loading extension DPMS
[ 32.408] (II) Loading extension XVideo
[ 32.408] (II) Loading extension XVideo-MotionCompensation
[ 32.408] (II) Loading extension X-Resource
[ 32.408] (II) LoadModule: "dbe"
[ 32.408] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 32.408] (II) Module dbe: vendor="X.Org Foundation"
[ 32.408] compiled for 1.10.1, module version = 1.0.0
[ 32.408] Module class: X.Org Server Extension
[ 32.408] ABI class: X.Org Server Extension, version 5.0
[ 32.408] (II) Loading extension DOUBLE-BUFFER
[ 32.408] (II) LoadModule: "glx"
[ 32.408] (II) Loading /usr/lib/xorg/extra-modules/libglx.so
[ 33.604] (II) Module glx: vendor="NVIDIA Corporation"
[ 33.612] compiled for 4.0.2, module version = 1.0.0
[ 33.612] Module class: X.Org Server Extension
[ 33.612] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:10:15 PDT 2011
[ 33.612] (II) Loading extension GLX
[ 33.612] (II) LoadModule: "record"
[ 33.613] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 33.613] (II) Module record: vendor="X.Org Foundation"
[ 33.613] compiled for 1.10.1, module version = 1.13.0
[ 33.613] Module class: X.Org Server Extension
[ 33.613] ABI class: X.Org Server Extension, version 5.0
[ 33.613] (II) Loading extension RECORD
[ 33.613] (II) LoadModule: "dri"
[ 33.613] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 33.613] (II) Module dri: vendor="X.Org Foundation"
[ 33.613] compiled for 1.10.1, module version = 1.0.0
[ 33.613] ABI class: X.Org Server Extension, version 5.0
[ 33.613] (II) Loading extension XFree86-DRI
[ 33.613] (II) LoadModule: "dri2"
[ 33.613] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 33.613] (II) Module dri2: vendor="X.Org Foundation"
[ 33.613] compiled for 1.10.1, module version = 1.2.0
[ 33.613] ABI class: X.Org Server Extension, version 5.0
[ 33.613] (II) Loading extension DRI2
[ 33.613] (II) LoadModule: "intel"
[ 33.636] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 33.638] (II) Module intel: vendor="X.Org Foundation"
[ 33.638] compiled for 1.10.1, module version = 2.14.0
[ 33.638] Module class: X.Org Video Driver
[ 33.638] ABI class: X.Org Video Driver, version 10.0
[ 33.638] (II) LoadModule: "nvidia"
[ 33.638] (II) Loading /usr/lib/xorg/extra-modules/nvidia_drv.so
[ 33.903] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 33.912] compiled for 4.0.2, module version = 1.0.0
[ 33.912] Module class: X.Org Video Driver
[ 34.011] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 34.011] (EE) NVIDIA: system's kernel log for additional error messages.
[ 34.011] (II) UnloadModule: "nvidia"
[ 34.011] (II) Unloading nvidia
[ 34.011] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 34.011] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 34.012] (++) using VT number 7
[ 34.014] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 34.014] drmOpenDevice: node name is /dev/dri/card0
[ 34.014] drmOpenDevice: open result is 9, (OK)
[ 34.014] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 34.014] drmOpenDevice: node name is /dev/dri/card0
[ 34.014] drmOpenDevice: open result is 9, (OK)
[ 34.014] drmOpenByBusid: drmOpenMinor returns 9
[ 34.014] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 34.014] (**) intel(0): Depth 24, (--) framebuffer bpp 32
[ 34.014] (==) intel(0): RGB weight 888
[ 34.014] (==) intel(0): Default visual is TrueColor
[ 34.014] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 34.014] (--) intel(0): Chipset: "Arrandale"
[ 34.014] (**) intel(0): Relaxed fencing enabled
[ 34.014] (**) intel(0): Tiling enabled
[ 34.014] (**) intel(0): SwapBuffers wait enabled
[ 34.014] (==) intel(0): video overlay key set to 0x101fe
[ 34.014] (II) intel(0): Output LVDS1 using monitor section Monitor0
[ 34.014] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video1
[ 34.017] (II) intel(0): Output VGA1 has no monitor section
[ 34.021] (II) intel(0): Output HDMI1 has no monitor section
[ 34.022] (II) intel(0): Output DP1 has no monitor section
[ 34.022] (II) intel(0): EDID for output LVDS1
[ 34.022] (II) intel(0): Manufacturer: AUO Model: 243c Serial#: 0
[ 34.022] (II) intel(0): Year: 2009 Week: 0
[ 34.022] (II) intel(0): EDID Version: 1.4
[ 34.022] (II) intel(0): Digital Display Input
[ 34.022] (II) intel(0): 6 bits per channel
[ 34.022] (II) intel(0): Digital interface is undefined
[ 34.022] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
[ 34.022] (II) intel(0): Gamma: 2.20
[ 34.022] (II) intel(0): No DPMS capabilities specified
[ 34.022] (II) intel(0): Supported color encodings: RGB 4:4:4
[ 34.022] (II) intel(0): First detailed timing is preferred mode
[ 34.022] (II) intel(0): Preferred mode is native pixel format and refresh rate
[ 34.022] (II) intel(0): redX: 0.620 redY: 0.340 greenX: 0.330 greenY: 0.570
[ 34.022] (II) intel(0): blueX: 0.150 blueY: 0.600 whiteX: 0.313 whiteY: 0.329
[ 34.022] (II) intel(0): Manufacturer's mask: 0
[ 34.022] (II) intel(0): Supported detailed timing:
[ 34.022] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 34.022] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 34.022] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 34.022] (II) intel(0): Supported detailed timing:
[ 34.023] (II) intel(0): clock: 69.3 MHz Image Size: 309 x 173 mm
[ 34.023] (II) intel(0): h_active: 1366 h_sync: 1404 h_sync_end 1426 h_blank_end 1436 h_border: 0
[ 34.023] (II) intel(0): v_active: 768 v_sync: 771 v_sync_end 777 v_blanking: 803 v_border: 0
[ 34.023] (II) intel(0): H3D38B140XW2
[ 34.023] (II) intel(0): Unknown vendor-specific block 0
[ 34.023] (II) intel(0): EDID (in hex):
[ 34.023] (II) intel(0): 00ffffffffffff0006af3c2400000000
[ 34.023] (II) intel(0): 00130104901f117802c8a59e57549226
[ 34.023] (II) intel(0): 99505400000001010101010101010101
[ 34.023] (II) intel(0): 010101010101121b5646500023302616
[ 34.023] (II) intel(0): 360035ad1000001a121b564650002330
[ 34.023] (II) intel(0): 2616360035ad1000001a000000fe0048
[ 34.023] (II) intel(0): 33443338804231343058573200000000
[ 34.023] (II) intel(0): 00004101960001000001010a2020008b
[ 34.023] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 34.023] (II) intel(0): Printing DDC gathered Modelines:
[ 34.023] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 34.023] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "576x432" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "680x384" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "720x450" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "800x512" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "840x525" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "960x540" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "960x600" (doublescan mode not supported)
[ 34.023] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 34.023] (II) intel(0): Printing probed modes for output LVDS1
[ 34.023] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 34.023] (II) intel(0): Modeline "1366x768"x60.1 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 34.023] (II) intel(0): Modeline "1360x768"x59.8 84.75 1360 1432 1568 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
[ 34.023] (II) intel(0): Modeline "1360x768"x60.0 72.00 1360 1408 1440 1520 768 771 781 790 +hsync -vsync (47.4 kHz)
[ 34.023] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 34.023] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 34.023] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 34.025] (II) intel(0): EDID for output VGA1
[ 34.026] (II) intel(0): Printing probed modes for output VGA1
[ 34.026] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 34.026] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 34.026] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 34.026] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz)
[ 34.026] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz)
[ 34.030] (II) intel(0): EDID for output HDMI1
[ 34.031] (II) intel(0): EDID for output DP1
[ 34.031] (II) intel(0): Output LVDS1 connected
[ 34.031] (II) intel(0): Output VGA1 connected
[ 34.031] (II) intel(0): Output HDMI1 disconnected
[ 34.031] (II) intel(0): Output DP1 disconnected
[ 34.031] (II) intel(0): Using user preference for initial modes
[ 34.031] (II) intel(0): Output LVDS1 using initial mode 1024x768
[ 34.031] (II) intel(0): Output VGA1 using initial mode 1024x768
[ 34.031] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 34.031] (II) intel(0): Kernel page flipping support detected, enabling
[ 34.031] (**) intel(0): Display dimensions: (310, 170) mm
[ 34.031] (**) intel(0): DPI set to (83, 114)
[ 34.031] (II) Loading sub module "fb"
[ 34.031] (II) LoadModule: "fb"
[ 34.032] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 34.032] (II) Module fb: vendor="X.Org Foundation"
[ 34.032] compiled for 1.10.1, module version = 1.0.0
[ 34.032] ABI class: X.Org ANSI C Emulation, version 0.4
[ 34.032] (==) Depth 24 pixmap format is 32 bpp
[ 34.032] (==) intel(0): VideoRam: 262144 KB
[ 34.032] (II) intel(0): [DRI2] Setup complete
[ 34.032] (II) intel(0): [DRI2] DRI driver: i965
[ 34.032] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[ 34.038] (II) UXA(0): Driver registered support for the following operations:
[ 34.038] (II) solid
[ 34.038] (II) copy
[ 34.038] (II) composite (RENDER acceleration)
[ 34.038] (II) put_image
[ 34.038] (II) get_image
[ 34.038] (==) intel(0): Backing store disabled
[ 34.038] (==) intel(0): Silken mouse enabled
[ 34.038] (II) intel(0): Initializing HW Cursor
[ 34.270] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 34.314] (**) intel(0): DPMS enabled
[ 34.314] (==) intel(0): Intel XvMC decoder enabled
[ 34.314] (II) intel(0): Set up textured video
[ 34.314] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 34.314] (II) intel(0): direct rendering: DRI2 Enabled
[ 34.314] (==) intel(0): hotplug detection: "enabled"
[ 34.314] (--) RandR disabled
[ 34.314] (II) Initializing built-in extension Generic Event Extension
[ 34.314] (II) Initializing built-in extension SHAPE
[ 34.314] (II) Initializing built-in extension MIT-SHM
[ 34.314] (II) Initializing built-in extension XInputExtension
[ 34.314] (II) Initializing built-in extension XTEST
[ 34.314] (II) Initializing built-in extension BIG-REQUESTS
[ 34.314] (II) Initializing built-in extension SYNC
[ 34.314] (II) Initializing built-in extension XKEYBOARD
[ 34.314] (II) Initializing built-in extension XC-MISC
[ 34.314] (II) Initializing built-in extension SECURITY
[ 34.314] (II) Initializing built-in extension XINERAMA
[ 34.314] (II) Initializing built-in extension XFIXES
[ 34.314] (II) Initializing built-in extension RENDER
[ 34.314] (II) Initializing built-in extension RANDR
[ 34.314] (II) Initializing built-in extension COMPOSITE
[ 34.314] (II) Initializing built-in extension DAMAGE
[ 34.314] (II) Initializing built-in extension GESTURE
[ 34.328] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 34.332] (II) intel(0): Setting screen physical size to 270 x 203
[ 34.345] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 34.352] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 34.352] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 34.352] (II) LoadModule: "evdev"
[ 34.352] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.352] (II) Module evdev: vendor="X.Org Foundation"
[ 34.352] compiled for 1.10.0.902, module version = 2.6.0
[ 34.353] Module class: X.Org XInput Driver
[ 34.353] ABI class: X.Org XInput driver, version 12.3
[ 34.353] (II) Using input driver 'evdev' for 'Power Button'
[ 34.353] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.353] (**) Power Button: always reports core events
[ 34.353] (**) Power Button: Device: "/dev/input/event3"
[ 34.400] (--) Power Button: Found keys
[ 34.400] (II) Power Button: Configuring as keyboard
[ 34.400] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 34.400] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 34.400] (**) Option "xkb_rules" "evdev"
[ 34.400] (**) Option "xkb_model" "pc105"
[ 34.400] (**) Option "xkb_layout" "us"
[ 34.400] (**) Option "xkb_variant" "altgr-intl"
[ 34.400] (**) Option "xkb_options" "lv3:ralt_switch"
[ 34.402] (II) XKB: reuse xkmfile /var/lib/xkb/server-D7AF3B6ECB69742DFEC8B5A42710D7CDD073118F.xkm
[ 34.403] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 34.403] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 34.403] (II) Using input driver 'evdev' for 'Video Bus'
[ 34.403] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.403] (**) Video Bus: always reports core events
[ 34.403] (**) Video Bus: Device: "/dev/input/event9"
[ 34.440] (--) Video Bus: Found keys
[ 34.440] (II) Video Bus: Configuring as keyboard
[ 34.440] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input10/event9"
[ 34.440] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 34.440] (**) Option "xkb_rules" "evdev"
[ 34.440] (**) Option "xkb_model" "pc105"
[ 34.440] (**) Option "xkb_layout" "us"
[ 34.440] (**) Option "xkb_variant" "altgr-intl"
[ 34.440] (**) Option "xkb_options" "lv3:ralt_switch"
[ 34.441] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
[ 34.441] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 34.441] (II) Using input driver 'evdev' for 'Video Bus'
[ 34.441] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.441] (**) Video Bus: always reports core events
[ 34.441] (**) Video Bus: Device: "/dev/input/event8"
[ 34.470] (--) Video Bus: Found keys
[ 34.470] (II) Video Bus: Configuring as keyboard
[ 34.470] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input9/event8"
[ 34.470] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 34.470] (**) Option "xkb_rules" "evdev"
[ 34.470] (**) Option "xkb_model" "pc105"
[ 34.470] (**) Option "xkb_layout" "us"
[ 34.470] (**) Option "xkb_variant" "altgr-intl"
[ 34.470] (**) Option "xkb_options" "lv3:ralt_switch"
[ 34.475] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 34.475] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 34.475] (II) Using input driver 'evdev' for 'Power Button'
[ 34.475] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.475] (**) Power Button: always reports core events
[ 34.475] (**) Power Button: Device: "/dev/input/event0"
[ 34.510] (--) Power Button: Found keys
[ 34.510] (II) Power Button: Configuring as keyboard
[ 34.510] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 34.510] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 34.510] (**) Option "xkb_rules" "evdev"
[ 34.510] (**) Option "xkb_model" "pc105"
[ 34.510] (**) Option "xkb_layout" "us"
[ 34.510] (**) Option "xkb_variant" "altgr-intl"
[ 34.510] (**) Option "xkb_options" "lv3:ralt_switch"
[ 34.510] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 34.510] (II) No input driver/identifier specified (ignoring)
[ 34.510] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 34.510] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 34.510] (II) Using input driver 'evdev' for 'Sleep Button'
[ 34.510] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.510] (**) Sleep Button: always reports core events
[ 34.510] (**) Sleep Button: Device: "/dev/input/event2"
[ 34.550] (--) Sleep Button: Found keys
[ 34.550] (II) Sleep Button: Configuring as keyboard
[ 34.550] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 34.550] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 34.550] (**) Option "xkb_rules" "evdev"
[ 34.550] (**) Option "xkb_model" "pc105"
[ 34.550] (**) Option "xkb_layout" "us"
[ 34.550] (**) Option "xkb_variant" "altgr-intl"
[ 34.550] (**) Option "xkb_options" "lv3:ralt_switch"
[ 34.552] (II) config/udev: Adding input device HID 413c:8161 (/dev/input/event6)
[ 34.552] (**) HID 413c:8161: Applying InputClass "evdev keyboard catchall"
[ 34.552] (II) Using input driver 'evdev' for 'HID 413c:8161'
[ 34.552] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.552] (**) HID 413c:8161: always reports core events
[ 34.552] (**) HID 413c:8161: Device: "/dev/input/event6"
[ 34.600] (--) HID 413c:8161: Found keys
[ 34.600] (II) HID 413c:8161: Configuring as keyboard
[ 34.600] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.1/1-1.1.1/1-1.1.1:1.0/input/input6/event6"
[ 34.600] (II) XINPUT: Adding extended input device "HID 413c:8161" (type: KEYBOARD)
[ 34.600] (**) Option "xkb_rules" "evdev"
[ 34.600] (**) Option "xkb_model" "pc105"
[ 34.600] (**) Option "xkb_layout" "us"
[ 34.600] (**) Option "xkb_variant" "altgr-intl"
[ 34.600] (**) Option "xkb_options" "lv3:ralt_switch"
[ 34.601] (II) config/udev: Adding input device HDA Intel Mic at Ext Front Jack (/dev/input/event10)
[ 34.601] (II) No input driver/identifier specified (ignoring)
[ 34.601] (II) config/udev: Adding input device HDA Intel HP Out at Ext Front Jack (/dev/input/event11)
[ 34.601] (II) No input driver/identifier specified (ignoring)
[ 34.602] (II) config/udev: Adding input device HID 04d9:0499 (/dev/input/event5)
[ 34.602] (**) HID 04d9:0499: Applying InputClass "evdev pointer catchall"
[ 34.602] (II) Using input driver 'evdev' for 'HID 04d9:0499'
[ 34.602] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.602] (**) HID 04d9:0499: always reports core events
[ 34.602] (**) HID 04d9:0499: Device: "/dev/input/event5"
[ 34.640] (--) HID 04d9:0499: Found 3 mouse buttons
[ 34.640] (--) HID 04d9:0499: Found scroll wheel(s)
[ 34.640] (--) HID 04d9:0499: Found relative axes
[ 34.640] (--) HID 04d9:0499: Found x and y relative axes
[ 34.640] (II) HID 04d9:0499: Configuring as mouse
[ 34.640] (II) HID 04d9:0499: Adding scrollwheel support
[ 34.640] (**) HID 04d9:0499: YAxisMapping: buttons 4 and 5
[ 34.640] (**) HID 04d9:0499: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 34.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input5/event5"
[ 34.640] (II) XINPUT: Adding extended input device "HID 04d9:0499" (type: MOUSE)
[ 34.640] (II) HID 04d9:0499: initialized for relative axes.
[ 34.640] (**) HID 04d9:0499: (accel) keeping acceleration scheme 1
[ 34.640] (**) HID 04d9:0499: (accel) acceleration profile 0
[ 34.640] (**) HID 04d9:0499: (accel) acceleration factor: 2.000
[ 34.640] (**) HID 04d9:0499: (accel) acceleration threshold: 4
[ 34.640] (II) config/udev: Adding input device HID 04d9:0499 (/dev/input/mouse0)
[ 34.640] (II) No input driver/identifier specified (ignoring)
[ 34.643] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event4)
[ 34.643] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 34.643] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 34.643] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 34.643] (**) AT Translated Set 2 keyboard: always reports core events
[ 34.643] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event4"
[ 34.700] (--) AT Translated Set 2 keyboard: Found keys
[ 34.710] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 34.710] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input4/event4"
[ 34.710] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 34.710] (**) Option "xkb_rules" "evdev"
[ 34.710] (**) Option "xkb_model" "pc105"
[ 34.710] (**) Option "xkb_layout" "us"
[ 34.710] (**) Option "xkb_variant" "altgr-intl"
[ 34.710] (**) Option "xkb_options" "lv3:ralt_switch"
[ 34.711] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event12)
[ 34.711] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 34.711] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 34.711] (II) LoadModule: "synaptics"
[ 34.711] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 34.711] (II) Module synaptics: vendor="X.Org Foundation"
[ 34.711] compiled for 1.10.0.902, module version = 1.3.99
[ 34.711] Module class: X.Org XInput Driver
[ 34.711] ABI class: X.Org XInput driver, version 12.3
[ 34.711] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 34.712] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 34.712] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 34.712] (**) Option "Device" "/dev/input/event12"
[ 35.080] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5658
[ 35.080] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4770
[ 35.080] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 35.080] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 35.080] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 35.220] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 35.220] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 35.220] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input13/event12"
[ 35.220] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 35.220] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 35.220] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 35.220] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 35.220] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 35.220] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 35.220] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 35.220] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 35.221] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 35.221] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 35.221] (II) No input driver/identifier specified (ignoring)
[ 35.225] (II) config/udev: Adding input device Dell WMI hotkeys (/dev/input/event7)
[ 35.225] (**) Dell WMI hotkeys: Applying InputClass "evdev keyboard catchall"
[ 35.225] (II) Using input driver 'evdev' for 'Dell WMI hotkeys'
[ 35.225] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 35.225] (**) Dell WMI hotkeys: always reports core events
[ 35.225] (**) Dell WMI hotkeys: Device: "/dev/input/event7"
[ 35.225] (--) Dell WMI hotkeys: Found keys
[ 35.225] (II) Dell WMI hotkeys: Configuring as keyboard
[ 35.225] (**) Option "config_info" "udev:/sys/devices/virtual/input/input8/event7"
[ 35.225] (II) XINPUT: Adding extended input device "Dell WMI hotkeys" (type: KEYBOARD)
[ 35.225] (**) Option "xkb_rules" "evdev"
[ 35.225] (**) Option "xkb_model" "pc105"
[ 35.225] (**) Option "xkb_layout" "us"
[ 35.225] (**) Option "xkb_variant" "altgr-intl"
[ 35.225] (**) Option "xkb_options" "lv3:ralt_switch"
[ 66.267] (II) intel(0): EDID vendor "VSC", prod id 26897
[ 66.267] (II) intel(0): Using hsync ranges from config file
[ 66.267] (II) intel(0): Using vrefresh ranges from config file
[ 66.267] (II) intel(0): Printing DDC gathered Modelines:
[ 66.267] (II) intel(0): Modeline "1600x1200"x0.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz)
[ 66.267] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 66.267] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 66.267] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 66.267] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 66.267] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 66.267] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 66.268] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 66.268] (II) intel(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 66.268] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 66.268] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 66.268] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 66.268] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 66.268] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 66.268] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 66.268] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 66.268] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 66.268] (II) intel(0): Modeline "1280x960"x0.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz)
[ 66.268] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 66.268] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 66.268] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 66.275] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 66.275] (II) intel(0): Printing DDC gathered Modelines:
[ 66.275] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 67.291] (II) intel(0): Allocated new frame buffer 3008x1200 stride 12288, tiled
[ 67.873] (II) intel(0): EDID vendor "AUO", prod id 9276
[ 67.873] (II) intel(0): Printing DDC gathered Modelines:
[ 67.873] (II) intel(0): Modeline "1366x768"x0.0 69.30 1366 1404 1426 1436 768 771 777 803 +hsync -vsync (48.3 kHz)
[ 962.410] (II) config/udev: removing device HID 04d9:0499
[ 962.410] (II) HID 04d9:0499: Close
[ 962.411] (II) UnloadModule: "evdev"
[ 962.411] (II) Unloading evdev
[ 971.572] (II) config/udev: Adding input device HID 04d9:0499 (/dev/input/event5)
[ 971.572] (**) HID 04d9:0499: Applying InputClass "evdev pointer catchall"
[ 971.572] (II) Using input driver 'evdev' for 'HID 04d9:0499'
[ 971.572] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 971.572] (**) HID 04d9:0499: always reports core events
[ 971.572] (**) HID 04d9:0499: Device: "/dev/input/event5"
[ 971.620] (--) HID 04d9:0499: Found 3 mouse buttons
[ 971.620] (--) HID 04d9:0499: Found scroll wheel(s)
[ 971.620] (--) HID 04d9:0499: Found relative axes
[ 971.620] (--) HID 04d9:0499: Found x and y relative axes
[ 971.620] (II) HID 04d9:0499: Configuring as mouse
[ 971.620] (II) HID 04d9:0499: Adding scrollwheel support
[ 971.620] (**) HID 04d9:0499: YAxisMapping: buttons 4 and 5
[ 971.620] (**) HID 04d9:0499: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 971.620] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.1/2-1.1.1:1.0/input/input14/event5"
[ 971.620] (II) XINPUT: Adding extended input device "HID 04d9:0499" (type: MOUSE)
[ 971.620] (II) HID 04d9:0499: initialized for relative axes.
[ 971.620] (**) HID 04d9:0499: (accel) keeping acceleration scheme 1
[ 971.620] (**) HID 04d9:0499: (accel) acceleration profile 0
[ 971.620] (**) HID 04d9:0499: (accel) acceleration factor: 2.000
[ 971.620] (**) HID 04d9:0499: (accel) acceleration threshold: 4
[ 971.621] (II) config/udev: Adding input device HID 04d9:0499 (/dev/input/mouse0)
[ 971.621] (II) No input driver/identifier specified (ignoring)
[ 971.826] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event13)
[ 971.826] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 971.826] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 971.826] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 971.826] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 971.826] (**) Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event13"
[ 971.880] (--) Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 971.880] (II) Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 971.880] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.0/input/input15/event13"
[ 971.880] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD)
[ 971.880] (**) Option "xkb_rules" "evdev"
[ 971.880] (**) Option "xkb_model" "pc105"
[ 971.880] (**) Option "xkb_layout" "us"
[ 971.880] (**) Option "xkb_variant" "altgr-intl"
[ 971.880] (**) Option "xkb_options" "lv3:ralt_switch"
[ 971.881] (II) config/udev: Adding input device Mitsumi Electric Apple Extended USB Keyboard (/dev/input/event14)
[ 971.881] (**) Mitsumi Electric Apple Extended USB Keyboard: Applying InputClass "evdev keyboard catchall"
[ 971.881] (II) Using input driver 'evdev' for 'Mitsumi Electric Apple Extended USB Keyboard'
[ 971.881] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 971.881] (**) Mitsumi Electric Apple Extended USB Keyboard: always reports core events
[ 971.881] (**) Mitsumi Electric Apple Extended USB Keyboard: Device: "/dev/input/event14"
[ 971.920] (--) Mitsumi Electric Apple Extended USB Keyboard: Found keys
[ 971.920] (II) Mitsumi Electric Apple Extended USB Keyboard: Configuring as keyboard
[ 971.920] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.1/2-1.1.3/2-1.1.3:1.1/input/input16/event14"
[ 971.920] (II) XINPUT: Adding extended input device "Mitsumi Electric Apple Extended USB Keyboard" (type: KEYBOARD)
[ 971.920] (**) Option "xkb_rules" "evdev"
[ 971.920] (**) Option "xkb_model" "pc105"
[ 971.920] (**) Option "xkb_layout" "us"
[ 971.920] (**) Option "xkb_variant" "altgr-intl"
[ 971.920] (**) Option "xkb_options" "lv3:ralt_switch"
Follow ups
References