← Back to team overview

hybrid-graphics-linux team mailing list archive

Re: bumblebee v1.0 has been released... updated script and new name...

 

Hi,

Im sorry, I forgot..

I've done these changes before, and the test I did was actualy with them applied.

Any other ideas?

Gaspo

On 10/05/11 09:29, Martin Juhl wrote:
Hi..

Thanks for the info..

Try to change the following to things:

/etc/init.d/xdm-optimus line 64:

change:

LD_LIBRARY_PATH=/usr/lib64/nvidia-current start-stop-daemon --start
--quiet $SSD_START_ARGS -- -config /etc/X11/xdm-optimus/xdm-config\ to

LD_LIBRARY_PATH=/usr/lib/nvidia-current start-stop-daemon --start
--quiet $SSD_START_ARGS -- -config /etc/X11/xdm-optimus/xdm-config\


and

/usr/local/bin/optimusXserver line 2:

LD_LIBRARY_PATH=/usr/lib64/nvidia-current /usr/bin/X $@

to

LD_LIBRARY_PATH=/usr/lib/nvidia-current /usr/bin/X $@

I think that should do it... let me know how it goes...

/Martin



------------------------------------------------------------------------
*Fra: *"Gaspo" <martin@xxxxxxxx>
*Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
*Sendt: *tirsdag, 10. maj 2011 09:22:30
*Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been released...
updated script and new name...

Hi Martin,

Im trying to make it work on my 32bit ubuntu. I have customized your
install script. There were only few changes:

dpkg -i install-files/VirtualGL_i386.deb
instead of 64bit version.

and

echo "VGL_DISPLAY=:1
export VGL_DISPLAY
VGL_COMPRESS=$IMAGETRANSPORT
export VGL_COMPRESS
VGL_READBACK=fbo
export VGL_READBACK

alias optirun='vglrun -ld /usr/lib/nvidia-current'" >> /etc/bash.bashrc

instead of

alias optirun32='vglrun -ld /usr/lib32/nvidia-current'
alias optirun64='vglrun -ld /usr/lib64/nvidia-current'" >> /etc/bash.bashrc


but when I run
$ optirun glxgears

I get a black window and low fps with this output:

Xlib: extension "NV-GLX" missing on display ":1".
Xlib: extension "NV-GLX" missing on display ":1".
[VGL] WARNING: The OpenGL rendering context obtained on X display
[VGL] :1 is indirect, which may cause performance to suffer.
[VGL] If :1 is a local X display, then the framebuffer device
[VGL] permissions may be set incorrectly.
195 frames in 5.0 seconds = 38.994 FPS
174 frames in 5.0 seconds = 34.514 FPS
196 frames in 5.0 seconds = 39.157 FPS
182 frames in 5.0 seconds = 36.312 FPS

Could you please direct me, where sould I look to solve this?

Gaspo

On 10/05/11 00:02, Martin Juhl wrote:
 > The script should take care of any pci setup...
 >
 >
 > Please provide the logs:
 > /var/log/Xorg.1.log and /var/log/xdm-optimus.log...
 >
 >
 >
 >
 > ------------------------------------------------------------------------
 > *Fra: *"Eric Bechet" <bechet@xxxxxxxxxx>
 > *Til: *hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
 > *Sendt: *mandag, 9. maj 2011 19:19:41
 > *Emne: *Re: [Hybrid-graphics-linux] bumblebee v1.0 has been released...
 > updated script and new name...
 >
 > Hi,
 >
 > Nice job.
 >
 > I've tested this on an asus eeepc1215N running ubuntu 10.04 (LTS)
 >
 > First, there seem to be at least two variants of the same laptop, one
 > with nvidia card at PCI 4:0:0 (at least one member of the list reported
 > this port number) and another at 5:0:0 (mine)
 >
 > For now it is not working on my configuration. Installation is without
 > trouble, but when using optirun64 (with glxgears for instance), nothing
 > displays and a message says that it cannot open the display.
 >
 > running glxgears from command line is ok (uses the intel graphic card)
 >
 > What can I do to help ?
 >
 > Eric
 >
 > Le 08/05/2011 23:19, Martin Juhl a écrit :
 > > Hi all
 > >
 > > The prime-ng project has, for several reasons, been renamed to
 > bumblebee..
 > >
 > > The script has now also been updated... thanks to all for your great
 > > feedback.. keep it comming...
 > >
 > > bumblebee is Optimus support for Linux, with real offloading, and not
 > > switchable graphics.. More important.. it works on Optimus Laptops
 > without a
 > > graphical multiplexer..
 > >
 > > Version 1.0 of the bumblebee project has been release!!! (version
 > number has
 > > been reset from the prime-ng project)
 > >
 > > The Installation should now be completely automatic...
 > >
 > >
 > > Now 3D is enabled on both the Intel and the nVidia at the same time..
 > >
 > >
 > >
 > > Status available here: http://www.martin-juhl.dk
 > >
 > > Code @GitHub: https://github.com/MrMEEE/bumblebee
 > >
 > > Twitter here: http://twitter.com/martinjuhl
 > >
 > >
 > > Martin Juhl/MrMEEE
 > >
 > >
 > >
 > > _______________________________________________
 > > Mailing list: https://launchpad.net/~hybrid-graphics-linux
 > > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
 > > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
 > > More help : https://help.launchpad.net/ListHelp
 >
 >
 > _______________________________________________
 > Mailing list: https://launchpad.net/~hybrid-graphics-linux
 > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
 > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
 > More help : https://help.launchpad.net/ListHelp
 >
 >
 >
 > _______________________________________________
 > Mailing list: https://launchpad.net/~hybrid-graphics-linux
 > Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
 > Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
 > More help : https://help.launchpad.net/ListHelp

_______________________________________________
Mailing list: https://launchpad.net/~hybrid-graphics-linux
Post to : hybrid-graphics-linux@xxxxxxxxxxxxxxxxxxx
Unsubscribe : https://launchpad.net/~hybrid-graphics-linux
More help : https://help.launchpad.net/ListHelp


Follow ups

References