igotu2gpx team mailing list archive

[Michael Hofmann <mh21@xxxxxxxxx>]

> usb_os_open: 0df7:0900 
> usb_claim_interface: called for interface 0
> Interface 0 of device is 0x00001f77
> claim_interface: Interface 0 of device from QueryInterface is 0x50f390
Ok, seems like it is connecting to the device,

> libusb/darwin.c usb_bulk_transfer: Transfering 16 bytes of data on endpoint 0x81
> libusb/darwin.c usb_bulk_transfer: USB pipe is an interrupt pipe. Timeouts will not be used.
> libusb/darwin.c usb_control_msg (device: 002-0df7-0900-00-00): 33 9 512 0 0x50de10 8 1000
sending the command,

> USB error: libusb/darwin.c usb_bulk_transfer: pipe is stalled
> USB error: usb_bulk_read: An error occured during read (see messages above)
but it is not getting a reply :-(.

Maybe the tracker is just not ready. Can you try it again, but make sure
that the blue led is flickering before running igotu2gpx. Blue
flickering means the tracker is sending NMEA data, which also means it
should accept commands.

-- 
igotu2gpx crashes on Mac OS 10.5.6
https://bugs.launchpad.net/bugs/369865
You received this bug notification because you are a member of
MobileAction i-gotU USB GPS travel logger Mac/Linux support developers,
which is subscribed to igotu2gpx.

Status in MobileAction i-gotU USB GPS travel logger Mac/Linux support: New

Bug description:
running igotu2gpx 0.2.1 has a few results - none of them appear to work. The enclosed files show the output from igotu2gpx info -v - the verbose output and the crash report. Below is the data from system profiler showing USB connectivity:

i-gotU:

  Product ID:	0x0900
  Vendor ID:	0x0df7
  Version:	0.00
  Speed:	Up to 12 Mb/sec
  Manufacturer:	Mobile Action
  Location ID:	0xfa230000
  Current Available (mA):	100
  Current Required (mA):	100