kernel-packages team mailing list archive

[Lyosha <ubuntuone@xxxxxxxxxx>]

Interestingly jme in my Shuttle XS35V2 would establish a gigabit
connection fine to a 8-port netgear switch, but not to 5-port netgear
switch.  100mbit connection works with either.  It is very strange.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/880316

Title:
  Link not detected / cable seems unplugged with jme - JMicron JMC250
  Gigabit Ethernet Controller

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  I'm trying to install Ubuntu on a Shuttle XS35GTV2.

  The installer can't set up the network connection.
  I've tried Ubuntu 10.04 32 and 64 bit netinstall, minimal and server, Ubuntu 11.10 32 bit netinstall.
  The Debian Squeeze 64 bit netinstall installer has no problem.
  (I've now installed openELEC which has no problems too)

  I was able to install Ubuntu 10.04 64 bit server but only without network connection. I then could load the jme module:
  # modprobe jme
  # depmod -a
  without errors.

  But I can't get eth0 running.

  The output of lspci is:
  02:00.5 Ethernet controller: JMicron Technology Corp. JMC250 PCI Express Gigabit Ethernet Controller (rev 03)
  03:00.0 Network controller: Realtek Semiconductor C., Ltd Device 8176 (rev 01)

  # lshw -C network
    *-network DISABLED
         description: Ethernet interface
         product: JMC250 PCI Express Gigabit Ethernet Controller
         vendor: JMicron Technology Corp.
         physical id: 0.5
         bus info: pci@0000:02:00.5
         logical name: eth0
         version: 03
         serial: 80:ee:73:1f:ef:df
         size: 10MB/s
         capacity: 1GB/s
         width: 32 bits
         clock: 33MHz
         capabilities: pm pciexpress msix msi bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
         configuration: autonegotiation=off broadcast=yes driver=jme driverversion=1.0.5 duplex=half latency=0 link=no multicast=yes port=MII speed=10MB/s
         resources: irq:17 memory:feaf4000-feaf7fff ioport:dc00(size=128) ioport:d800(size=256)
    *-network UNCLAIMED
         description: Network controller
         product: Realtek Semiconductor Co., Ltd.
         vendor: Realtek Semiconductor Co., Ltd.
         physical id: 0
         bus info: pci@0000:03:00.0
         version: 01
         width: 64 bits
         clock: 33MHz
         capabilities: pm msi pciexpress bus_master cap_list
         configuration: latency=0
         resources: ioport:e800(size=256) memory:febfc000-febfffff

  I've posted my problem at the Ubuntu users mailing list:
  http://www.linux-archive.org/ubuntu-user/588603-jme-module-missing-netboot-installation.html

  Edit: Unfortunately I couldn't reassign it as it has nothing to do
  with gnome-nettools (see post #1).

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/880316/+subscriptions