← Back to team overview

kernel-packages team mailing list archive

[Bug 1417339] Missing required logs.


This bug is missing log files that will aid in diagnosing the problem.
>From a terminal window please run:

apport-collect 1417339

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
       Status: New => Incomplete

** Tags added: utopic

You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.

  utopic kernel can't make ethernet workable on Samsung exynos5440 sleds

Status in linux package in Ubuntu:

Bug description:
  On Samsung exynos5440 sleds board, ethernet phy is attached as the fixed phy mode, which can be
  seen from  the following part in arch/arm/boot/dts/exynos5440-sd5v1.dts of linux kernel:

      gmac: ethernet@00230000 {
          fixed-link {
              speed = <1000>;

  Unfortunately the above dts definition doesn't use the standard fixed
  link dts binding, also the ethernet driver of stmmac doesn't parse
  fixed link binding, so cause ethernet not workable at all on utopic.

  The two patches in below tree can add the fixed link support in stmmac
  and changes the fixed link description into current standard binding:

      git://kernel.ubuntu.com/ming/ubuntu-utopic.git exynos5440-net-fix

  72bf502 UBUNTU: SAUCE: (no-up) net: stmmac: add fixed_phy support via
  fixed-link DT binding
  65a6d09 UBUNTU: SAUCE: (no-up) ARM: exynos5440-sd5v1: switch to
  fixed-link DT binding


To manage notifications about this bug go to: