← Back to team overview

kernel-packages team mailing list archive

[Bug 151913] Re: Mixer channels missing Sigmatel ID 7691 - HDA Intel

 

should be

+ { .id = 0x83847691, .name = "STAC9200D", .patch = patch_stac9200 },

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/151913

Title:
  Mixer channels missing Sigmatel ID 7691 - HDA Intel

Status in “alsa-driver” package in Ubuntu:
  Triaged
Status in “linux” package in Ubuntu:
  Won't Fix

Bug description:
  alsamixer only shows "Master"  "PCM" "Caller ID" and "Off-Hook"
  Sound is heard - volume can be controlled for PCM audio ONLY
  system beep sound cannot be controlled - it's Very loud
  no other mixer channels can be found or controlled with alsamixer

  Same problem exists with other kernel versions
  Have tried package version of ALSA 1.14 and development version of alsa 1.15

  Hardware: Toshiba Qosmio G30 Laptop
  Audio Hardware Intel ICH7 HDA Audio with Sigmatel 7691 CODEC 

  aplay --list-devices
  **** List of PLAYBACK Hardware Devices ****
  card 0: Intel [HDA Intel], device 0: HDA Generic [HDA Generic]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
  card 0: Intel [HDA Intel], device 6: Si3054 Modem [Si3054 Modem]
    Subdevices: 1/1
    Subdevice #0: subdevice #0

  
  lspci info
  00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller [8086:27d8] (rev 02)
          Subsystem: Toshiba America Info Systems Unknown device [1179:0001]
          Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
          Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
          Latency: 0, Cache Line Size: 32 bytes
          Interrupt: pin A routed to IRQ 23
          Region 0: Memory at 54000000 (64-bit, non-prefetchable) [size=16K]
          Capabilities: [50] Power Management version 2
                  Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
                  Status: D0 PME-Enable- DSel=0 DScale=0 PME-
          Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
                  Address: 0000000000000000  Data: 0000
          Capabilities: [70] Express Unknown type IRQ 0
                  Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                  Device: Latency L0s <64ns, L1 <1us
                  Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                  Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                  Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                  Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
                  Link: Latency L0s <64ns, L1 <1us
                  Link: ASPM Disabled CommClk- ExtSynch-
                  Link: Speed unknown, Width x0

  Mixers:
  0: SigmaTel ID 7691

  Simple mixer control 'Master',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 22 [71%] [-13.50dB] [on]
    Front Right: Playback 22 [71%] [-13.50dB] [on]
  Simple mixer control 'PCM',0
    Capabilities: pvolume
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 255
    Mono:
    Front Left: Playback 205 [80%] [-10.00dB]
    Front Right: Playback 205 [80%] [-10.00dB]
  Simple mixer control 'Caller ID',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
  Simple mixer control 'Digital',0
    Capabilities: cvolume
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 120
    Front Left: Capture 0 [0%] [-30.00dB]
    Front Right: Capture 0 [0%] [-30.00dB]
  Simple mixer control 'Off-hook',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]

  ~# cat /etc/asound.conf ~/.asoundrc*
  cat: /etc/asound.conf: No such file or directory
  cat: /home/paull/.asoundrc*: No such file or directo

  
  /proc/interrupts
          CPU0       CPU1       
    0:    1441702          0   IO-APIC-edge      timer
    1:         11      11334   IO-APIC-edge      i8042
    8:         40          0   IO-APIC-edge      rtc
    9:        367          0   IO-APIC-fasteoi   acpi
   12:        124     776165   IO-APIC-edge      i8042
   14:        240      65251   IO-APIC-edge      libata
   15:          0          0   IO-APIC-edge      libata
   16:        505     376171   IO-APIC-fasteoi   uhci_hcd:usb5, eth0, nvidia
   18:     474548          0   IO-APIC-fasteoi   uhci_hcd:usb4, ipw3945
   19:          1          0   IO-APIC-fasteoi   yenta
   20:          3       7531   IO-APIC-fasteoi   ehci_hcd:usb1, uhci_hcd:usb2, tifm_7xx1, sdhci:slot0
   21:       4342      22538   IO-APIC-fasteoi   uhci_hcd:usb3, ahci
   22:          3          0   IO-APIC-fasteoi   ohci1394
   23:        228      89292   IO-APIC-fasteoi   HDA Intel
  NMI:          0          0 
  LOC:     132799     785214 
  ERR:          0
  MIS:          0

  
  dmesg
  [    0.000000] Linux version 2.6.22-14-generic (buildd@vernadsky) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic)
  [    0.000000] BIOS-provided physical RAM map:
  [    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
  [    0.000000]  BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
  [    0.000000]  BIOS-e820: 00000000000e0000 - 00000000000eee00 (reserved)
  [    0.000000]  BIOS-e820: 00000000000eee00 - 00000000000ef000 (ACPI NVS)
  [    0.000000]  BIOS-e820: 00000000000ef000 - 0000000000100000 (reserved)
  [    0.000000]  BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
  [    0.000000]  BIOS-e820: 000000003ff70000 - 0000000040000000 (reserved)
  [    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec28000 (reserved)
  [    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
  [    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
  [    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
  [    0.000000]  BIOS-e820: 00000000feda0000 - 00000000fedc0000 (reserved)
  [    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
  [    0.000000]  BIOS-e820: 00000000ffb00000 - 00000000ffc00000 (reserved)
  [    0.000000]  BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
  [    0.000000] 127MB HIGHMEM available.
  [    0.000000] 896MB LOWMEM available.
  [    0.000000] Entering add_active_range(0, 0, 262000) 0 entries of 256 used
  [    0.000000] Zone PFN ranges:
  [    0.000000]   DMA             0 ->     4096
  [    0.000000]   Normal       4096 ->   229376
  [    0.000000]   HighMem    229376 ->   262000
  [    0.000000] early_node_map[1] active PFN ranges
  [    0.000000]     0:        0 ->   262000
  [    0.000000] On node 0 totalpages: 262000
  [    0.000000]   DMA zone: 32 pages used for memmap
  [    0.000000]   DMA zone: 0 pages reserved
  [    0.000000]   DMA zone: 4064 pages, LIFO batch:0
  [    0.000000]   Normal zone: 1760 pages used for memmap
  [    0.000000]   Normal zone: 223520 pages, LIFO batch:31
  [    0.000000]   HighMem zone: 254 pages used for memmap
  [    0.000000]   HighMem zone: 32370 pages, LIFO batch:7
  [    0.000000] DMI 2.4 present.
  [    0.000000] ACPI: RSDP signature @ 0xC00F01B0 checksum 0
  [    0.000000] ACPI: RSDP 000F01B0, 0014 (r0 TOSHIB)
  [    0.000000] ACPI: RSDT 3FF70000, 0054 (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: FACP 3FF7007C, 0084 (r2 TOSHIB A0037    20021230 TASM  4010000)
  [    0.000000] ACPI: DSDT 3FF70100, 5E6D (r2 TOSHIB A0037    20070222 MSFT  100000E)
  [    0.000000] ACPI: FACS 000EEE00, 0040
  [    0.000000] ACPI: SSDT 3FF75F6D, 0306 (r2 TOSHIB A0037    20060907 MSFT  100000E)
  [    0.000000] ACPI: DBGP 3FF76A84, 0034 (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: BOOT 3FF70054, 0028 (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: APIC 3FF769E0, 0068 (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: MCFG 3FF76A48, 003C (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: HPET 3FF76C86, 0038 (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: SLIC 3FF76CBE, 0176 (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: FROS 3FF76AB8, 006E (r1 TOSHIB A0037    20060901 TASM  4010000)
  [    0.000000] ACPI: SSDT 3FF76E34, 05E1 (r2 TOSHIB A0037    20060908 MSFT  100000E)
  [    0.000000] ACPI: SSDT 3FF76BD6, 00B0 (r2 TOSHIB A0037    20060908 MSFT  100000E)
  [    0.000000] ACPI: SSDT 3FF77F58, 0076 (r2 TOSHIB A0037    20060928 MSFT  100000E)
  [    0.000000] ACPI: PM-Timer IO Port: 0xd808
  [    0.000000] ACPI: Local APIC address 0xfee00000
  [    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
  [    0.000000] Processor #0 6:14 APIC version 20
  [    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
  [    0.000000] Processor #1 6:14 APIC version 20
  [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
  [    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
  [    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
  [    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
  [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
  [    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
  [    0.000000] ACPI: IRQ0 used by override.
  [    0.000000] ACPI: IRQ2 used by override.
  [    0.000000] ACPI: IRQ9 used by override.
  [    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
  [    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
  [    0.000000] Using ACPI (MADT) for SMP configuration information
  [    0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
  [    0.000000] Built 1 zonelists.  Total pages: 259954
  [    0.000000] Kernel command line: root=UUID=8a877e3c-4cd2-4f55-bcb4-99bab48ea5bf ro quiet splash
  [    0.000000] mapped APIC to ffffd000 (fee00000)
  [    0.000000] mapped IOAPIC to ffffc000 (fec00000)
  [    0.000000] Enabling fast FPU save and restore... done.
  [    0.000000] Enabling unmasked SIMD FPU exception support... done.
  [    0.000000] Initializing CPU#0
  [    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
  [    0.000000] Detected 2161.411 MHz processor.
  [    7.358182] Console: colour VGA+ 80x25
  [    7.358417] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
  [    7.358717] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
  [    7.385061] Memory: 1027372k/1048000k available (2015k kernel code, 19948k reserved, 916k data, 364k init, 130496k highmem)
  [    7.385069] virtual kernel memory layout:
  [    7.385070]     fixmap  : 0xfff4d000 - 0xfffff000   ( 712 kB)
  [    7.385071]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
  [    7.385072]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
  [    7.385073]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
  [    7.385074]       .init : 0xc03e3000 - 0xc043e000   ( 364 kB)
  [    7.385075]       .data : 0xc02f7d26 - 0xc03dce84   ( 916 kB)
  [    7.385076]       .text : 0xc0100000 - 0xc02f7d26   (2015 kB)
  [    7.385079] Checking if this processor honours the WP bit even in supervisor mode... Ok.
  [    7.385108] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1
  [    7.385219] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
  [    7.385223] hpet0: 3 64-bit timers, 14318180 Hz
  [    7.466099] Calibrating delay using timer specific routine.. 4325.73 BogoMIPS (lpj=8651473)
  [    7.466116] Security Framework v1.0.0 initialized
  [    7.466123] SELinux:  Disabled at boot.
  [    7.466134] Mount-cache hash table entries: 512
  [    7.466227] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
  [    7.466234] monitor/mwait feature present.
  [    7.466235] using mwait in idle threads.
  [    7.466239] CPU: L1 I cache: 32K, L1 D cache: 32K
  [    7.466241] CPU: L2 cache: 2048K
  [    7.466243] CPU: Physical Processor ID: 0
  [    7.466244] CPU: Processor Core ID: 0
  [    7.466246] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000
  [    7.466253] Compat vDSO mapped to ffffe000.
  [    7.466263] Checking 'hlt' instruction... OK.
  [    7.482156] SMP alternatives: switching to UP code
  [    7.482501] Early unpacking initramfs... done
  [    7.750548] ACPI: Core revision 20070126
  [    7.750601] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found.
  [    7.752830] CPU0: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
  [    7.752845] SMP alternatives: switching to SMP code
  [    7.752947] Booting processor 1/1 eip 3000
  [    7.764255] Initializing CPU#1
  [    7.841458] Calibrating delay using timer specific routine.. 4322.54 BogoMIPS (lpj=8645083)
  [    7.841464] CPU: After generic identify, caps: bfe9fbff 00000000 00000000 00000000 0000c1a9 00000000 00000000
  [    7.841468] monitor/mwait feature present.
  [    7.841471] CPU: L1 I cache: 32K, L1 D cache: 32K
  [    7.841472] CPU: L2 cache: 2048K
  [    7.841474] CPU: Physical Processor ID: 0
  [    7.841475] CPU: Processor Core ID: 1
  [    7.841477] CPU: After all inits, caps: bfe9fbff 00000000 00000000 00002940 0000c1a9 00000000 00000000
  [    7.841908] CPU1: Intel Genuine Intel(R) CPU           T2600  @ 2.16GHz stepping 08
  [    7.841928] Total of 2 processors activated (8648.27 BogoMIPS).
  [    7.842074] ENABLING IO-APIC IRQs
  [    7.842255] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
  [    7.989288] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
  [    8.009274] Brought up 2 CPUs
  [    8.126468] migration_cost=42
  [    8.126589] Booting paravirtualized kernel on bare hardware
  [    8.126655] Time:  8:56:02  Date: 09/12/107
  [    8.126673] NET: Registered protocol family 16
  [    8.126746] EISA bus registered
  [    8.126750] ACPI: bus type pci registered
  [    8.126865] PCI: PCI BIOS revision 2.10 entry at 0xfd95c, last bus=8
  [    8.126866] PCI: Using configuration type 1
  [    8.126868] Setting up standard PCI resources
  [    8.128871] ACPI: EC: Look up EC in DSDT
  [    8.132047] ACPI: Interpreter enabled
  [    8.132049] ACPI: (supports S0 S3 S4 S5)
  [    8.132061] ACPI: Using IOAPIC for interrupt routing
  [    8.137680] ACPI: PCI Root Bridge [PCI0] (0000:00)
  [    8.137687] PCI: Probing PCI hardware (bus 00)
  [    8.138165] PCI quirk: region d800-d87f claimed by ICH6 ACPI/GPIO/TCO
  [    8.138168] PCI quirk: region eec0-eeff claimed by ICH6 GPIO
  [    8.139124] PCI: Transparent bridge - 0000:00:1e.0
  [    8.139286] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
  [    8.139390] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
  [    8.139568] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
  [    8.139643] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXCB._PRT]
  [    8.139715] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.MPEX._PRT]
  [    8.139788] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
  [    8.141726] ACPI: PCI Interrupt Link [LNKA] (IRQs *10)
  [    8.141847] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *11)
  [    8.141967] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *11)
  [    8.142088] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *11)
  [    8.142213] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *11)
  [    8.142333] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *11)
  [    8.142453] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *11)
  [    8.142572] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11)
  [    8.142680] Linux Plug and Play Support v0.97 (c) Adam Belay
  [    8.142688] pnp: PnP ACPI init
  [    8.142694] ACPI: bus type pnp registered
  [    8.145956] pnp: PnP ACPI: found 11 devices
  [    8.145958] ACPI: ACPI bus type pnp unregistered
  [    8.145961] PnPBIOS: Disabled by ACPI PNP
  [    8.145997] PCI: Using ACPI for IRQ routing
  [    8.145999] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a report
  [    8.157446] NET: Registered protocol family 8
  [    8.157448] NET: Registered protocol family 20
  [    8.157486] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved
  [    8.157488] pnp: 00:00: iomem range 0xe0000-0xfffff could not be reserved
  [    8.157491] pnp: 00:00: iomem range 0x100000-0x3ff6ffff could not be reserved
  [    8.157494] pnp: 00:00: iomem range 0x3ff70000-0x3ff7ffff could not be reserved
  [    8.157498] pnp: 00:01: iomem range 0xf0000000-0xf3ffffff has been reserved
  [    8.157505] pnp: 00:09: ioport range 0x1e0-0x1ef has been reserved
  [    8.160922] Time: tsc clocksource has been installed.
  [    8.160934] Switched to high resolution mode on CPU 0
  [    8.161007] Switched to high resolution mode on CPU 1
  [    8.187707] PCI: Failed to allocate mem resource #6:20000@f0000000 for 0000:01:00.0
  [    8.187758] PCI: Bridge: 0000:00:01.0
  [    8.187760]   IO window: c000-cfff
  [    8.187764]   MEM window: fc000000-fdffffff
  [    8.187766]   PREFETCH window: e0000000-efffffff
  [    8.187770] PCI: Bridge: 0000:00:1c.0
  [    8.187772]   IO window: b000-bfff
  [    8.187776]   MEM window: ffd00000-ffdfffff
  [    8.187779]   PREFETCH window: disabled.
  [    8.187783] PCI: Bridge: 0000:00:1c.1
  [    8.187785]   IO window: a000-afff
  [    8.187790]   MEM window: fa000000-fbffffff
  [    8.187793]   PREFETCH window: disabled.
  [    8.187797] PCI: Bridge: 0000:00:1c.2
  [    8.187798]   IO window: disabled.
  [    8.187802]   MEM window: ffc00000-ffcfffff
  [    8.187805]   PREFETCH window: disabled.
  [    8.187825] PCI: Bus 7, cardbus bridge: 0000:06:0b.0
  [    8.187827]   IO window: 00001000-000010ff
  [    8.187831]   IO window: 00001400-000014ff
  [    8.187835]   PREFETCH window: 50000000-53ffffff
  [    8.187839]   MEM window: 58000000-5bffffff
  [    8.187843] PCI: Bridge: 0000:00:1e.0
  [    8.187845]   IO window: 1000-1fff
  [    8.187849]   MEM window: f4000000-f7ffffff
  [    8.187853]   PREFETCH window: 50000000-53ffffff
  [    8.187866] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16
  [    8.187871] PCI: Setting latency timer of device 0000:00:01.0 to 64
  [    8.187886] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17
  [    8.187891] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  [    8.187905] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16
  [    8.187910] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  [    8.187925] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18
  [    8.187930] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  [    8.187939] PCI: Setting latency timer of device 0000:00:1e.0 to 64
  [    8.187950] PCI: Enabling device 0000:06:0b.0 (0000 -> 0003)
  [    8.187954] ACPI: PCI Interrupt 0000:06:0b.0[A] -> GSI 21 (level, low) -> IRQ 19
  [    8.187967] NET: Registered protocol family 2
  [    8.236784] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
  [    8.236834] TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
  [    8.237666] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
  [    8.237992] TCP: Hash tables configured (established 131072 bind 65536)
  [    8.237995] TCP reno registered
  [    8.252854] checking if image is initramfs... it is
  [    8.783467] Freeing initrd memory: 7039k freed
  [    8.783568] Simple Boot Flag value 0xb read from CMOS RAM was invalid
  [    8.783570] Simple Boot Flag at 0x7c set to 0x1
  [    8.784021] audit: initializing netlink socket (disabled)
  [    8.784033] audit(1192179363.152:1): initialized
  [    8.784115] highmem bounce pool size: 64 pages
  [    8.785773] VFS: Disk quotas dquot_6.5.1
  [    8.785814] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
  [    8.785889] io scheduler noop registered
  [    8.785890] io scheduler anticipatory registered
  [    8.785892] io scheduler deadline registered
  [    8.785904] io scheduler cfq registered (default)
  [    8.785985] Boot video device is 0000:01:00.0
  [    8.786057] PCI: Setting latency timer of device 0000:00:01.0 to 64
  [    8.786086] assign_interrupt_mode Found MSI capability
  [    8.786089] Allocate Port Service[0000:00:01.0:pcie00]
  [    8.786154] PCI: Setting latency timer of device 0000:00:1c.0 to 64
  [    8.786189] assign_interrupt_mode Found MSI capability
  [    8.786191] Allocate Port Service[0000:00:1c.0:pcie00]
  [    8.786259] PCI: Setting latency timer of device 0000:00:1c.1 to 64
  [    8.786295] assign_interrupt_mode Found MSI capability
  [    8.786297] Allocate Port Service[0000:00:1c.1:pcie00]
  [    8.786322] Allocate Port Service[0000:00:1c.1:pcie02]
  [    8.786392] PCI: Setting latency timer of device 0000:00:1c.2 to 64
  [    8.786427] assign_interrupt_mode Found MSI capability
  [    8.786429] Allocate Port Service[0000:00:1c.2:pcie00]
  [    8.786552] isapnp: Scanning for PnP cards...
  [    9.138843] isapnp: No Plug & Play device found
  [    9.157942] Real Time Clock Driver v1.12ac
  [    9.158078] hpet_resources: 0xfed00000 is busy
  [    9.158117] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
  [    9.159035] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
  [    9.159146] input: Macintosh mouse button emulation as /class/input/input0
  [    9.159211] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
  [    9.164265] serio: i8042 KBD port at 0x60,0x64 irq 1
  [    9.164270] serio: i8042 AUX port at 0x60,0x64 irq 12
  [    9.164372] mice: PS/2 mouse device common for all mice
  [    9.164453] EISA: Probing bus 0 at eisa.0
  [    9.164459] Cannot allocate resource for EISA slot 1
  [    9.164479] EISA: Detected 0 cards.
  [    9.164696] TCP cubic registered
  [    9.164710] NET: Registered protocol family 1
  [    9.164728] Using IPI No-Shortcut mode
  [    9.164870]   Magic number: 11:662:927
  [    9.164933]   hash matches device ptyxc
  [    9.165152] Freeing unused kernel memory: 364k freed
  [    9.179241] input: AT Translated Set 2 keyboard as /class/input/input1
  [   10.324083] AppArmor: AppArmor initialized<5>audit(1192179364.652:2):  type=1505 info="AppArmor initialized" pid=1241
  [   10.330528] fuse init (API version 7.8)
  [   10.333962] Failure registering capabilities with primary security module.
  [   10.358994] ACPI: SSDT 3FF76470, 00F3 (r2 TOSHIB A0037    20060907 MSFT  100000E)
  [   10.359113] ACPI: SSDT 3FF765D9, 034E (r2 TOSHIB A0037    20060907 MSFT  100000E)
  [   10.359284] ACPI: CPU0 (power states: C1[C1] C2[C2])
  [   10.359331] ACPI: SSDT 3FF76563, 0076 (r2 TOSHIB A0037    20060907 MSFT  100000E)
  [   10.359433] ACPI: SSDT 3FF76927, 0079 (r2 TOSHIB A0037    20060907 MSFT  100000E)
  [   10.359618] ACPI: CPU1 (power states: C1[C1] C2[C2])
  [   10.360283] ACPI: Thermal Zone [THRM] (32 C)
  [    2.868000] Marking TSC unstable due to: possible TSC halt in C2.
  [    2.872000] Time: hpet clocksource has been installed.
  [    3.184000] usbcore: registered new interface driver usbfs
  [    3.184000] usbcore: registered new interface driver hub
  [    3.184000] usbcore: registered new device driver usb
  [    3.184000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
  [    3.184000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
  [    3.184000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
  [    3.184000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
  [    3.184000] ehci_hcd 0000:00:1d.7: debug port 1
  [    3.184000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
  [    3.184000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xffaffc00
  [    3.188000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
  [    3.188000] usb usb1: configuration #1 chosen from 1 choice
  [    3.188000] hub 1-0:1.0: USB hub found
  [    3.188000] hub 1-0:1.0: 8 ports detected
  [    3.200000] SCSI subsystem initialized
  [    3.204000] libata version 2.21 loaded.
  [    3.216000] USB Universal Host Controller Interface driver v3.0
  [    3.256000] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI
  [    3.256000] Copyright (c) 1999-2006 Intel Corporation.
  [    3.292000] ata_piix 0000:00:1f.1: version 2.11
  [    3.292000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18
  [    3.292000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
  [    3.292000] scsi0 : ata_piix
  [    3.292000] scsi1 : ata_piix
  [    3.292000] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00019f10 irq 14
  [    3.292000] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x00019f18 irq 15
  [    3.628000] ata1.00: ATAPI: TOSHIBA DVDW/HD TS-L802A, TF30, max UDMA/33
  [    3.820000] ata1.00: configured for UDMA/33
  [    3.820000] ata2: port disabled. ignoring.
  [    3.828000] scsi 0:0:0:0: CD-ROM            TOSHIBA  DVDW/HD TS-L802A TF30 PQ: 0 ANSI: 5
  [    3.828000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
  [    3.828000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
  [    3.828000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
  [    3.828000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
  [    3.828000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00009fe0
  [    3.832000] usb usb2: configuration #1 chosen from 1 choice
  [    3.832000] hub 2-0:1.0: USB hub found
  [    3.832000] hub 2-0:1.0: 2 ports detected
  [    3.936000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
  [    3.936000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
  [    3.936000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
  [    3.936000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
  [    3.936000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00009f80
  [    3.936000] usb usb3: configuration #1 chosen from 1 choice
  [    3.936000] hub 3-0:1.0: USB hub found
  [    3.936000] hub 3-0:1.0: 2 ports detected
  [    4.040000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
  [    4.040000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
  [    4.040000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
  [    4.040000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
  [    4.040000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009f60
  [    4.040000] usb usb4: configuration #1 chosen from 1 choice
  [    4.040000] hub 4-0:1.0: USB hub found
  [    4.040000] hub 4-0:1.0: 2 ports detected
  [    4.144000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16
  [    4.144000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
  [    4.144000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
  [    4.144000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
  [    4.144000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00009f40
  [    4.144000] usb usb5: configuration #1 chosen from 1 choice
  [    4.144000] hub 5-0:1.0: USB hub found
  [    4.144000] hub 5-0:1.0: 2 ports detected
  [    4.248000] ahci 0000:00:1f.2: version 2.2
  [    4.248000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 21
  [    4.280000] usb 3-1: new full speed USB device using uhci_hcd and address 2
  [    4.456000] usb 3-1: configuration #1 chosen from 1 choice
  [    5.252000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0xf impl SATA mode
  [    5.252000] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part 
  [    5.252000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
  [    5.252000] scsi2 : ahci
  [    5.252000] scsi3 : ahci
  [    5.252000] scsi4 : ahci
  [    5.252000] scsi5 : ahci
  [    5.252000] ata3: SATA max UDMA/133 cmd 0xf886a900 ctl 0x00000000 bmdma 0x00000000 irq 21
  [    5.252000] ata4: SATA max UDMA/133 cmd 0xf886a980 ctl 0x00000000 bmdma 0x00000000 irq 21
  [    5.252000] ata5: SATA max UDMA/133 cmd 0xf886aa00 ctl 0x00000000 bmdma 0x00000000 irq 21
  [    5.252000] ata6: SATA max UDMA/133 cmd 0xf886aa80 ctl 0x00000000 bmdma 0x00000000 irq 21
  [    5.756000] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [    6.152000] ata3.00: Host Protected Area detected:
  [    6.152000]  current size: 185615010 sectors
  [    6.152000]  native size: 195371568 sectors
  [    6.152000] ata3.00: native size increased to 195371568 sectors
  [    6.152000] ata3.00: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100
  [    6.152000] ata3.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
  [    6.156000] ata3.00: configured for UDMA/100
  [    6.472000] ata4: SATA link down (SStatus 0 SControl 0)
  [    6.956000] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
  [    7.356000] ata5.00: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100
  [    7.356000] ata5.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 31/32)
  [    7.356000] ata5.00: configured for UDMA/100
  [    7.704000] ata6: SATA link down (SStatus 0 SControl 0)
  [    7.704000] scsi 2:0:0:0: Direct-Access     ATA      TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
  [    7.704000] scsi 4:0:0:0: Direct-Access     ATA      TOSHIBA MK1032GS AS02 PQ: 0 ANSI: 5
  [    7.704000] PCI: Enabling device 0000:06:0b.1 (0000 -> 0002)
  [    7.704000] ACPI: PCI Interrupt 0000:06:0b.1[B] -> GSI 20 (level, low) -> IRQ 22
  [    7.704000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  [    7.704000] PCI: Setting latency timer of device 0000:02:00.0 to 64
  [    7.756000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[22]  MMIO=[5400a000-5400a7ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
  [    7.796000] e1000: 0000:02:00.0: e1000_probe: (PCI Express:2.5Gb/s:Width x1) 00:0e:7b:6c:50:e0
  [    7.820000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
  [    7.820000] Uniform CD-ROM driver Revision: 3.20
  [    7.820000] sr 0:0:0:0: Attached scsi CD-ROM sr0
  [    7.824000] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
  [    7.824000] sd 2:0:0:0: [sda] Write Protect is off
  [    7.824000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  [    7.824000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [    7.824000] sd 2:0:0:0: [sda] 195371568 512-byte hardware sectors (100030 MB)
  [    7.824000] sd 2:0:0:0: [sda] Write Protect is off
  [    7.824000] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
  [    7.824000] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [    7.824000]  sda:<5>sr 0:0:0:0: Attached scsi generic sg0 type 5
  [    7.824000] sd 2:0:0:0: Attached scsi generic sg1 type 0
  [    7.824000] scsi 4:0:0:0: Attached scsi generic sg2 type 0
  [    7.856000] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
  [    7.888000]  sda1 sda2 sda3
  [    7.900000] sd 2:0:0:0: [sda] Attached SCSI disk
  [    7.900000] sd 4:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
  [    7.900000] sd 4:0:0:0: [sdb] Write Protect is off
  [    7.900000] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  [    7.900000] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [    7.900000] sd 4:0:0:0: [sdb] 195371568 512-byte hardware sectors (100030 MB)
  [    7.900000] sd 4:0:0:0: [sdb] Write Protect is off
  [    7.900000] sd 4:0:0:0: [sdb] Mode Sense: 00 3a 00 00
  [    7.900000] sd 4:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
  [    7.900000]  sdb: sdb1
  [    7.968000] sd 4:0:0:0: [sdb] Attached SCSI disk
  [    8.192000] Attempting manual resume
  [    8.192000] swsusp: Resume From Partition 8:2
  [    8.192000] PM: Checking swsusp image.
  [    8.192000] PM: Resume from disk failed.
  [    8.232000] kjournald starting.  Commit interval 5 seconds
  [    8.232000] EXT3-fs: mounted filesystem with ordered data mode.
  [    9.028000] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0000390000abd32a]
  [   18.012000] Linux agpgart interface v0.102 (c) Dave Jones
  [   18.032000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
  [   18.036000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
  [   18.148000] input: PC Speaker as /class/input/input2
  [   18.304000] iTCO_vendor_support: vendor-support=0
  [   18.316000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
  [   18.388000] Yenta: CardBus bridge found at 0000:06:0b.0 [1179:0001]
  [   18.388000] Yenta: Enabling burst memory read transactions
  [   18.388000] Yenta: Using CSCINT to route CSC interrupts to PCI
  [   18.388000] Yenta: Routing CardBus interrupts to PCI
  [   18.388000] Yenta TI: socket 0000:06:0b.0, mfunc 0x01aa1022, devctl 0x64
  [   18.436000] sdhci: Secure Digital Host Controller Interface driver
  [   18.436000] sdhci: Copyright(c) Pierre Ossman
  [   18.460000] ieee80211_crypt: registered algorithm 'NULL'
  [   18.460000] ieee80211: 802.11 data/management/control stack, git-1.1.13
  [   18.460000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@xxxxxxxxxxxxxxx>
  [   18.620000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
  [   18.620000] Socket status: 30000006
  [   18.620000] pcmcia: parent PCI bridge I/O window: 0x1000 - 0x1fff
  [   18.620000] cs: IO port probe 0x1000-0x1fff: clean.
  [   18.620000] pcmcia: parent PCI bridge Memory window: 0xf4000000 - 0xf7ffffff
  [   18.620000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
  [   18.620000] PCI: Enabling device 0000:06:0b.2 (0000 -> 0002)
  [   18.620000] ACPI: PCI Interrupt 0000:06:0b.2[D] -> GSI 23 (level, low) -> IRQ 20
  [   18.620000] sdhci: SDHCI controller found at 0000:06:0b.3 [104c:803c] (rev 0)
  [   18.620000] PCI: Enabling device 0000:06:0b.3 (0000 -> 0002)
  [   18.620000] ACPI: PCI Interrupt 0000:06:0b.3[D] -> GSI 23 (level, low) -> IRQ 20
  [   18.620000] mmc0: SDHCI at 0x5400a800 irq 20 DMA
  [   18.628000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
  [   18.628000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
  [   18.652000] nvidia: module license 'NVIDIA' taints kernel.
  [   18.660000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18
  [   18.660000] PCI: Setting latency timer of device 0000:05:00.0 to 64
  [   18.668000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
  [   18.988000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
  [   18.988000] PCI: Setting latency timer of device 0000:01:00.0 to 64
  [   18.988000] NVRM: loading NVIDIA UNIX x86 Kernel Module  100.14.19  Wed Sep 12 14:12:24 PDT 2007
  [   19.160000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x82a0b1, caps: 0xb04713/0x60040d
  [   19.224000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
  [   19.232000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0xd860)
  [   19.232000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
  [   19.372000] intel_rng: FWH not detected
  [   19.384000] cs: IO port probe 0x100-0x3af: clean.
  [   19.384000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
  [   19.384000] cs: IO port probe 0x820-0x8ff: clean.
  [   19.384000] cs: IO port probe 0xc00-0xcf7: clean.
  [   19.384000] cs: IO port probe 0xa00-0xaff: clean.
  [   19.660000] PCI: Enabling device 0000:00:1b.0 (0000 -> 0002)
  [   19.660000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 23
  [   19.660000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
  [   20.832000] ipw3945: Detected geography ABG (11 802.11bg channels, 13 802.11a channels)
  [   20.860000] lp: driver loaded but no devices found
  [   20.936000] Adding 2064344k swap on /dev/sda2.  Priority:-1 extents:1 across:2064344k
  [   21.276000] EXT3 FS on sda3, internal journal
  [   22.160000] kjournald starting.  Commit interval 5 seconds
  [   22.160000] EXT3 FS on sda1, internal journal
  [   22.160000] EXT3-fs: mounted filesystem with ordered data mode.
  [   22.172000] kjournald starting.  Commit interval 5 seconds
  [   22.180000] EXT3 FS on sdb1, internal journal
  [   22.180000] EXT3-fs: mounted filesystem with ordered data mode.
  [   24.568000] ACPI: Video Device [VGA] (multi-head: yes  rom: yes  post: no)
  [   24.600000] No dock devices found.
  [   24.628000] input: Power Button (FF) as /class/input/input4
  [   24.628000] ACPI: Power Button (FF) [PWRF]
  [   24.628000] input: Lid Switch as /class/input/input5
  [   24.628000] ACPI: Lid Switch [LID]
  [   24.628000] input: Power Button (CM) as /class/input/input6
  [   24.628000] ACPI: Power Button (CM) [PWRB]
  [   24.712000] ACPI: AC Adapter [ADP1] (on-line)
  [   24.720000] toshiba_acpi: Toshiba Laptop ACPI Extras version 0.19a-dev
  [   24.720000] toshiba_acpi:     HCI method: \_SB_.VALZ.GHCI
  [   24.724000] toshiba_acpi: Toshiba hotkeys are sent as ACPI events
  [   24.724000] toshiba_acpi: ktoshkeyd will check 2 times per second
  [   24.724000] toshiba_acpi: Dropped 0 keys from the queue on startup
  [   24.756000] ACPI: Battery Slot [BAT1] (battery present)
  [   26.064000] ppdev: user-space parallel port driver
  [   26.392000] audit(1192179387.946:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5131 profile="/usr/sbin/cupsd"
  [   26.460000] apm: BIOS not found.
  [   26.764000] Failure registering capabilities with primary security module.
  [   26.956000] Bluetooth: Core ver 2.11
  [   26.956000] NET: Registered protocol family 31
  [   26.956000] Bluetooth: HCI device and connection manager initialized
  [   26.956000] Bluetooth: HCI socket layer initialized
  [   26.968000] Bluetooth: L2CAP ver 2.8
  [   26.968000] Bluetooth: L2CAP socket layer initialized
  [   27.056000] Bluetooth: RFCOMM socket layer initialized
  [   27.056000] Bluetooth: RFCOMM TTY layer initialized
  [   27.056000] Bluetooth: RFCOMM ver 1.8
  [   52.040000] input: Virtual ThinkFinger Keyboard as /class/input/input7
  [   72.640000] NET: Registered protocol family 10
  [   72.640000] lo: Disabled Privacy Extensions
  [   72.644000] ADDRCONF(NETDEV_UP): eth0: link is not ready
  [   72.644000] ADDRCONF(NETDEV_UP): eth1: link is not ready
  [  107.064000] NET: Registered protocol family 17
  [  110.196000] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
  [  110.240000] ieee80211_crypt: registered algorithm 'CCMP'
  [  111.224000] ieee80211_crypt: registered algorithm 'TKIP'
  [  125.336000] eth1: no IPv6 routers present
  [  154.960000] tifm_core: MMC/SD card detected in socket 0:1
  [  155.140000] mmc1: card lacks mandatory switch function, performance might suffer.
  [  155.180000] mmcblk0: mmc1:b368 SDC   999936KiB (ro)
  [  155.180000]  mmcblk0: p1
  [ 1931.680000] input: Virtual ThinkFinger Keyboard as /class/input/input8
  [ 2586.964000] input: Virtual ThinkFinger Keyboard as /class/input/input9

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/alsa-driver/+bug/151913/+subscriptions