kernel-packages team mailing list archive

["Lutchy Horace \(Bug Management\)" <bugs.management@xxxxxxxxxxxxxx>]

I had enconntered this same issue. I am not quite sure if it's CONFIG_*
option not enabled or else however I was able to remedy the issue by
adding 'swapaccount=1' to the kernel line. That in turn enabled
memory.memsw.* options in cgroups. Hope this helps you.


Sincerely yours,
LH

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1348688

Title:
  kernel does not support limiting swap usage
  (memory.memsw.limit_in_bytes missing)

Status in linux package in Ubuntu:
  Triaged

Bug description:
  (Sorry I'm not sure exactly what package to report this against -
  kernel perhaps? libvirt is what I was using to replicate the problem)

  Host platform: ubuntu 14.04 amd64, Mac Mini, 16GB RAM.

  Short version: create an LXC domain with memtune > swap_hard_limit set
  in the XML:

  <domain type='lxc'>
    <name>gold-lxc-20140717</name>
    <uuid>b2a02d49-bb1e-4aec-81d1-58910892780e</uuid>
    <memory unit='KiB'>327680</memory>
    <currentMemory unit='KiB'>327680</currentMemory>
    <memtune>
      <swap_hard_limit unit='KiB'>131072</swap_hard_limit>
    </memtune>
    ...

  (full version at end of this report)

  Now try to start it:

  $ virsh -c lxc: start gold-lxc-20140717error: Failed to start domain gold-lxc-20140717
  error: internal error: guest failed to start: Unable to write to '/sys/fs/cgroup/memory/machine/gold-lxc-20140717.libvirt-lxc/memory.memsw.limit_in_bytes': No such file or directory

  The reason this matters is because otherwise the LXC memory limit
  applies only to real RAM used. If the guest exceeds this it can still
  use as much swap space as it likes, and is therefore effectively
  unlimited (and can happily DoS the swap disk).

  Long version:

  I created an ubuntu 14.04 i386 VM image using python-vmbuilder,
  loopback-mounted it with qemu-nbd, and rsync'd it to create a root
  filesystem for an LXC guest.

  Then defined a guest using libvirt XML and started it using "virsh -c
  lxc: start <domain>" (as per XML at end but without the <memtune>
  section). It starts successfully, networking is fine, I can get a
  console etc.

  Now, the libvirt XML description says the guest's memory limit is
  320MB:

    <memory unit='KiB'>327680</memory>
    <currentMemory unit='KiB'>327680</currentMemory>

  and indeed the cgroups setting has been set:

  $ cat /sys/fs/cgroup/memory/machine/gold-lxc-20140717.libvirt-lxc/memory.limit_in_bytes
  335544320

  However inside the guest I can happily allocate as much memory as I
  like, up to just under 4GB, which is the limit for a 32-bit guest.

  Here's the test program I ran in the guest (usemem.c):

  #include <stdlib.h>
  #include <unistd.h>
  #include <stdio.h>

  int main(void)
  {
      char *p;
      int i,j;
      int ok=0, fail=0;
      for (i=0; i<4096; i++) {
          p = malloc(1024*1024);
          if (p) {
              ok++;
              for (j=0; j<1024*1024; j++)
                  p[j] = rand();
          }
          else
              fail++;
      }
      fprintf(stderr, "Done: %d ok, %d fail\n", ok, fail);
      sleep(600);
      return fail ? 1 : 0;
  }

  Result from running:

  Done: 4076 ok, 20 fail

  View from the host:

  nsrc@kit1:~/workshop-kit$ ps auxwww | grep usemem | grep -v grep
  nsrc     10506 96.1  1.3 4192152 224776 ?      S+   14:41   0:55 ./usemem

  $ cat /sys/fs/cgroup/memory/machine/gold-lxc-20140717.libvirt-lxc/memory.limit_in_bytes
  335544320
  $ cat /sys/fs/cgroup/memory/machine/gold-lxc-20140717.libvirt-lxc/memory.max_usage_in_bytes
  335544320
  $ cat /sys/fs/cgroup/memory/machine/gold-lxc-20140717.libvirt-lxc/memory.usage_in_bytes
  292331520

  You can see there's definitely 4GB in use by this process, and yet the
  cgroup thinks less than 280MB is in use, which is below the 320MB
  limit.

  However if you look at swap usage in the host while the memory suck
  program is running:

  $ free
               total       used       free     shared    buffers     cached
  Mem:      16338300    3066952   13271348       1684     135512    1489268
  -/+ buffers/cache:    1442172   14896128
  Swap:     16678908    3971248   12707660

  and after it has terminated:

  $ free
               total       used       free     shared    buffers     cached
  Mem:      16338300    2774440   13563860       1684     135544    1489188
  -/+ buffers/cache:    1149708   15188592
  Swap:     16678908       5484   16673424

  i.e. the LXC guest used nearly 4GB of swap, and then gave it up when
  it terminated.

  Additional info:

  cgroup view from inside the guest:

  $ cat /proc/self/cgroup
  11:name=systemd:/
  10:hugetlb:/
  9:perf_event:/machine/gold-lxc-20140717.libvirt-lxc
  8:blkio:/machine/gold-lxc-20140717.libvirt-lxc
  7:freezer:/machine/gold-lxc-20140717.libvirt-lxc
  6:devices:/machine/gold-lxc-20140717.libvirt-lxc
  5:memory:/machine/gold-lxc-20140717.libvirt-lxc
  4:cpuacct:/machine/gold-lxc-20140717.libvirt-lxc
  3:cpu:/machine/gold-lxc-20140717.libvirt-lxc
  2:cpuset:/machine/gold-lxc-20140717.libvirt-lxc

  cgroup settings visible in the host:

  $ ls /sys/fs/cgroup/memory/machine/gold-lxc-20140717.libvirt-lxc/
  cgroup.clone_children               memory.limit_in_bytes
  cgroup.event_control                memory.max_usage_in_bytes
  cgroup.procs                        memory.move_charge_at_immigrate
  memory.failcnt                      memory.numa_stat
  memory.force_empty                  memory.oom_control
  memory.kmem.failcnt                 memory.pressure_level
  memory.kmem.limit_in_bytes          memory.soft_limit_in_bytes
  memory.kmem.max_usage_in_bytes      memory.stat
  memory.kmem.slabinfo                memory.swappiness
  memory.kmem.tcp.failcnt             memory.usage_in_bytes
  memory.kmem.tcp.limit_in_bytes      memory.use_hierarchy
  memory.kmem.tcp.max_usage_in_bytes  notify_on_release
  memory.kmem.tcp.usage_in_bytes      tasks
  memory.kmem.usage_in_bytes

  And here's the full XML as promised:

  <domain type='lxc'>
    <name>gold-lxc-20140717</name>
    <uuid>b2a02d49-bb1e-4aec-81d1-58910892780e</uuid>
    <memory unit='KiB'>327680</memory>
    <currentMemory unit='KiB'>327680</currentMemory>
    <memtune>
      <swap_hard_limit unit='KiB'>131072</swap_hard_limit>
    </memtune>
    <vcpu placement='static'>1</vcpu>
    <resource>
      <partition>/machine</partition>
    </resource>
    <os>
      <type arch='x86_64'>exe</type>
      <init>/sbin/init</init>
    </os>
    <clock offset='utc'/>
    <on_poweroff>destroy</on_poweroff>
    <on_reboot>restart</on_reboot>
    <on_crash>destroy</on_crash>
    <devices>
      <emulator>/usr/lib/libvirt/libvirt_lxc</emulator>
      <filesystem type='mount' accessmode='passthrough'>
        <source dir='/data1/lxc/gold-20140717/rootfs'/>
        <target dir='/'/>
      </filesystem>
      <interface type='bridge'>
        <mac address='52:54:5d:00:0a:88'/>
        <source bridge='br-lan'/>
      </interface>
      <console type='pty'>
        <target type='lxc' port='0'/>
      </console>
    </devices>
    <seclabel type='none'/>
  </domain>

  ProblemType: Bug
  DistroRelease: Ubuntu 14.04
  Package: libvirt-bin 1.2.2-0ubuntu13.1.1
  ProcVersionSignature: Ubuntu 3.13.0-32.57-generic 3.13.11.4
  Uname: Linux 3.13.0-32-generic x86_64
  ApportVersion: 2.14.1-0ubuntu3.2
  Architecture: amd64
  Date: Fri Jul 25 14:29:54 2014
  InstallationDate: Installed on 2014-07-16 (8 days ago)
  InstallationMedia: Ubuntu-Server 14.04 LTS "Trusty Tahr" - Release amd64 (20140416.2)
  SourcePackage: libvirt
  UpgradeStatus: No upgrade log present (probably fresh install)
  modified.conffile..etc.libvirt.qemu.conf: [inaccessible: [Errno 13] Permission denied: '/etc/libvirt/qemu.conf']

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1348688/+subscriptions