kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #107338
[Bug 1424884] Re: Ubuntu 15.04 PowerNV install error during network due to bnx2x driver errors
This bug was fixed in the package linux-firmware - 1.143
---------------
linux-firmware (1.143) vivid; urgency=medium
* Rebase against git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git cef33368c4d3425f11306496f0250f8ef1cf3c1f
rtl_nic: update firmware for RTL8168H and RTL8107E
linux-firmware: Fix qat_895xcc.bin permissions
linux-firmware: Add QLogic BR Series Adapter Firmware
linux-firmware: Fix firmware files with executable permission set
[ Leann Ogasawara ]
* UBUNTU: Add bnx2x firmware to linux-firmware udeb
-LP: #1424884
linux-firmware (1.142) vivid; urgency=medium
* Rebase against git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git 17657c35869baa999b454e868cd3d5a7e1656425
linux-firmware: update Marvell USB8797-B0 firmware image
linux-firmware: update Marvell SD8897-B0 firmware combo image
linux-firmware: update Marvell PCIe/USB 8897-B0 firmware combo image
linux-firmware: add Marvell USB8897-B0 firmware combo image
linux-firmware: update Marvell 8897-B0 firmware images to p73
linux-firmware: update Marvell SD8787 firmware version p192
linux-firmware: update Marvell SD8787 firmware version p52
linux-firmware: update Marvell 8897-B0 firmware images to p103
linux-firmware: update WHENCE file for Marvell 8897 FW versions
linux-firmware: update Marvell USB8797-B0 firmware image
linux-firmware: add Marvell 8887-A2 firmware image
linux-firmware: add Marvell USB8766-A0 firmware combo image
linux-firmware: update Marvell 8897-B0 firmware images to p106
rtlwifi: rtl8192ee: New firmware from Realtek
linux-firmware: update Marvell 8897-B0 firmware images to p112
linux-firmware: update Marvell USB8797-B0 firmware image
linux-firmware: update Marvell SD8897-B0 firmware combo image
linux-firmware: update Marvell PCIe/USB 8897-B0 firmware combo image
linux-firmware: add Marvell USB8897-B0 firmware combo image
linux-firmware: update Marvell 8897-B0 firmware images to p73
linux-firmware: update Marvell SD8787 firmware version p192
linux-firmware: update Marvell SD8787 firmware version p52
linux-firmware: update Marvell 8897-B0 firmware images to p103
linux-firmware: update WHENCE file for Marvell 8897 FW versions
linux-firmware: update Marvell USB8797-B0 firmware image
linux-firmware: add Marvell 8887-A2 firmware image
linux-firmware: add Marvell USB8766-A0 firmware combo image
linux-firmware: update Marvell 8897-B0 firmware images to p106
linux-firmware: update Marvell 8897-B0 firmware images to p112
Merge branch 'marvell-mwifiex'
linux-firmware: update firmware for Intel Broadwell SST DSP
linux-firmware: add sst audio firmware for braswell platforms
Fix WHENCE entry for smsmdtv
iwlwifi: add new -12 firmware for 3160 / 7260 / 7265 / 7265D
linux-firmware: Update firmware patch for Intel Bluetooth 7260 (B3)
linux-firmware: Update firmware patch for Intel Bluetooth 7260 (B4)
linux-firmware: Update firmware patch for Intel Bluetooth 7260 (B5)
linux-firmware: Update firmware patch for Intel Bluetooth 7265 (C0)
linux-firmware: Update firmware patch for Intel Bluetooth 7260 (B6)
linux-firmware: Update firmware patch for Intel Bluetooth 7265 (D0)
* iwlwifi: update -10.ucode for 3160 / 7260 / 7265 / 7265D
-LP: #1354975
-- Seth Forshee <seth.forshee@xxxxxxxxxxxxx> Wed, 04 Mar 2015 00:16:58 -0600
** Changed in: linux-firmware (Ubuntu)
Status: Fix Committed => Fix Released
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1424884
Title:
Ubuntu 15.04 PowerNV install error during network due to bnx2x driver
errors
Status in linux-firmware package in Ubuntu:
Fix Released
Bug description:
---Problem Description---
I am trying to install Ubuntu 15.04 on a PowerNV system using a network installation. I am able to obtain an IP address with DHCP from the petitboot menu. I am also able to load the installation kernel and begin the installation but the network configuration within the installer fails. I tried to manually configure the network, but that failed too. When I exited to the shell of the installer, I can see my interface has the IP address that I manually configured(10.33.8.112), but I cannot connect to the local LAN:
~ # ip address
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc mq qlen 1000
link/ether 6c:ae:8b:02:10:88 brd ff:ff:ff:ff:ff:ff
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc mq qlen 1000
link/ether 6c:ae:8b:02:10:89 brd ff:ff:ff:ff:ff:ff
4: eth2: <BROADCAST,MULTICAST> mtu 1500 qdisc mq qlen 1000
link/ether 6c:ae:8b:02:10:8a brd ff:ff:ff:ff:ff:ff
5: eth3: <BROADCAST,MULTICAST> mtu 1500 qdisc mq qlen 1000
link/ether 6c:ae:8b:02:10:8b brd ff:ff:ff:ff:ff:ff
6: eth4: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 40:f2:e9:31:08:f4 brd ff:ff:ff:ff:ff:ff
inet 10.33.8.112/16 brd 10.33.255.255 scope global eth4
valid_lft forever preferred_lft forever
7: eth5: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 40:f2:e9:31:08:f5 brd ff:ff:ff:ff:ff:ff
8: eth6: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 40:f2:e9:31:08:f6 brd ff:ff:ff:ff:ff:ff
9: eth7: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
link/ether 40:f2:e9:31:08:f7 brd ff:ff:ff:ff:ff:ff
~ # ping 10.33.0.1
PING 10.33.0.1 (10.33.0.1): 56 data bytes
ping: sendto: Network is unreachable
I noticed in the /var/log/syslog for the install the following errors related to the bnx2x driver:
Feb 23 18:49:34 kernel: [ 546.172944] bnx2x 0005:01:00.2: Direct firmware load for bnx2x/bnx2x-e2-7.10.51.0.fw failed with error -2
Feb 23 18:49:34 kernel: [ 546.172950] bnx2x: [bnx2x_init_firmware:12958(eth6)]Can't load firmware file bnx2x/bnx2x-e2-7.10.51.0.fw
Feb 23 18:49:34 kernel: [ 546.172952] bnx2x: [bnx2x_func_hw_init:5523(eth6)]Error loading firmware
Feb 23 18:49:34 kernel: [ 546.172957] bnx2x: [bnx2x_nic_load:2704(eth6)]HW init failed, aborting
I'm wondering if this failure message for the network driver is what is preventing me from connecting to the network during the install?
---uname output---
N/A - Trying to do a fresh install of 15.04
Machine Type = 8247-42L
---Steps to Reproduce---
Boot the PowerNV system to petitboot menu and select network install of Ubuntu 15.04.
Install method: Network install
Install ISO Information: vivid-server-ppc64el.iso 23-Feb-2015 14:25 388M
The initrd has an older set of fw files and not the one the driver is expecting to load:
/lib/firmware/bnx2x # ls
bnx2x-e1-7.8.19.0.fw bnx2x-e1h-7.8.19.0.fw bnx2x-e2-7.8.19.0.fw
/lib/firmware/bnx2x #
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-firmware/+bug/1424884/+subscriptions