← Back to team overview

kernel-packages team mailing list archive

[Bug 1441387] Re: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [kworker/1:1:5087]

 

** Description changed:

  screen saver locked up computer - forced to hard shutdown computer and
  turn back on.
- 
- Version log: Ubuntu 3.19.0-12.12-generic 3.19.3
- 
- LSPCI:
- 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02)
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- 	Latency: 0
- 	Capabilities: [e0] Vendor Specific Information: Len=0b <?>
- 
- 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 64 bytes
- 	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
- 	I/O behind bridge: 0000c000-0000cfff
- 	Memory behind bridge: fb000000-fcffffff
- 	Prefetchable memory behind bridge: 00000000b0000000-00000000cfffffff
- 	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- 	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [88] Subsystem: Dell Inspiron 530 [1028:020d]
- 	Capabilities: [80] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
- 		Address: fee0f00c  Data: 41d1
- 	Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
- 		DevCap:	MaxPayload 128 bytes, PhantFunc 0
- 			ExtTag- RBE+
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- 			MaxPayload 128 bytes, MaxReadReq 128 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- 		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns, L1 <4us
- 			ClockPM- Surprise- LLActRep- BwNot-
- 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- 		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise-
- 			Slot #0, PowerLimit 0.000W; Interlock- NoCompl+
- 		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- 			Control: AttnInd Off, PwrInd On, Power- Interlock-
- 		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- 			Changed: MRL- PresDet+ LinkState-
- 		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
- 		RootCap: CRSVisible-
- 		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed- WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=Fixed
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- 			Status:	NegoPending- InProgress-
- 	Capabilities: [140 v1] Root Complex Link
- 		Desc:	PortNumber=02 ComponentID=01 EltType=Config
- 		Link0:	Desc:	TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+
- 			Addr:	00000000fed19000
- 	Kernel driver in use: pcieport
- 
- 00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02)
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 25
- 	Region 0: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K]
- 	Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K]
- 	Region 2: I/O ports at ff00 [size=32]
- 	Capabilities: [c8] Power Management version 2
- 		Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
- 	Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
- 		Address: 00000000fee0200c  Data: 41d2
- 	Capabilities: [e0] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: e1000e
- 
- 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 16
- 	Region 4: I/O ports at fe00 [size=32]
- 	Capabilities: [50] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: uhci_hcd
- 
- 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin B routed to IRQ 21
- 	Region 4: I/O ports at fd00 [size=32]
- 	Capabilities: [50] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: uhci_hcd
- 
- 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin D routed to IRQ 19
- 	Region 4: I/O ports at fc00 [size=32]
- 	Capabilities: [50] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: uhci_hcd
- 
- 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin C routed to IRQ 18
- 	Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K]
- 	Capabilities: [50] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: ehci-pci
- 
- 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02)
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 64 bytes
- 	Interrupt: pin A routed to IRQ 26
- 	Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
- 	Capabilities: [50] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
- 		Address: 00000000fee0f00c  Data: 4192
- 	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- 		DevCap:	MaxPayload 128 bytes, PhantFunc 0
- 			ExtTag- RBE-
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- 			MaxPayload 128 bytes, MaxReadReq 128 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed- WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=Fixed
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- 			Status:	NegoPending- InProgress-
- 		VC1:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=1 ArbSelect=Fixed TC/VC=80
- 			Status:	NegoPending- InProgress-
- 	Capabilities: [130 v1] Root Complex Link
- 		Desc:	PortNumber=0f ComponentID=02 EltType=Config
- 		Link0:	Desc:	TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- 			Addr:	00000000fed1c000
- 	Kernel driver in use: snd_hda_intel
- 
- 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 23
- 	Region 4: I/O ports at fb00 [size=32]
- 	Capabilities: [50] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: uhci_hcd
- 
- 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin B routed to IRQ 19
- 	Region 4: I/O ports at fa00 [size=32]
- 	Capabilities: [50] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: uhci_hcd
- 
- 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin C routed to IRQ 18
- 	Region 4: I/O ports at f900 [size=32]
- 	Capabilities: [50] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: uhci_hcd
- 
- 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 23
- 	Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K]
- 	Capabilities: [50] Power Management version 2
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: ehci-pci
- 
- 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode])
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Bus: primary=00, secondary=02, subordinate=02, sec-latency=32
- 	I/O behind bridge: 0000d000-0000dfff
- 	Memory behind bridge: fde00000-fdefffff
- 	Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
- 	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- 	BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
- 		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- 	Capabilities: [50] Subsystem: Dell Inspiron 530 [1028:020d]
- 
- 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02)
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- 	Kernel driver in use: lpc_ich
- 
- 00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 19
- 	Region 0: I/O ports at f800 [size=8]
- 	Region 1: I/O ports at f700 [size=4]
- 	Region 2: I/O ports at f600 [size=8]
- 	Region 3: I/O ports at f500 [size=4]
- 	Region 4: I/O ports at f400 [size=16]
- 	Region 5: I/O ports at f300 [size=16]
- 	Capabilities: [70] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [b0] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: ata_piix
- 
- 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02)
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Interrupt: pin B routed to IRQ 11
- 	Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256]
- 	Region 4: I/O ports at 0500 [size=32]
- 
- 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO])
- 	Subsystem: Dell Inspiron 530 [1028:020d]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0
- 	Interrupt: pin A routed to IRQ 19
- 	Region 0: I/O ports at f100 [size=8]
- 	Region 1: I/O ports at f000 [size=4]
- 	Region 2: I/O ports at ef00 [size=8]
- 	Region 3: I/O ports at ee00 [size=4]
- 	Region 4: I/O ports at ed00 [size=16]
- 	Region 5: I/O ports at ec00 [size=16]
- 	Capabilities: [70] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [b0] Vendor Specific Information: Len=06 <?>
- 	Kernel driver in use: ata_piix
- 
- 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller])
- 	Subsystem: eVga.com. Corp. Device [3842:2651]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 64 bytes
- 	Interrupt: pin A routed to IRQ 27
- 	Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
- 	Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M]
- 	Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M]
- 	Region 5: I/O ports at cf00 [size=128]
- 	[virtual] Expansion ROM at fc000000 [disabled] [size=512K]
- 	Capabilities: [60] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+
- 		Address: 00000000fee0f00c  Data: 41b2
- 	Capabilities: [78] Express (v2) Endpoint, MSI 00
- 		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
- 			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
- 			MaxPayload 128 bytes, MaxReadReq 512 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- 		LnkCap:	Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
- 			ClockPM+ Surprise- LLActRep- BwNot-
- 		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- CommClk+
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- 		DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
- 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- 		LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis-
- 			 Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS-
- 			 Compliance De-emphasis: -6dB
- 		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- 			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- 	Capabilities: [b4] Vendor Specific Information: Len=14 <?>
- 	Capabilities: [100 v1] Virtual Channel
- 		Caps:	LPEVC=0 RefClk=100ns PATEntryBits=1
- 		Arb:	Fixed- WRR32- WRR64- WRR128-
- 		Ctrl:	ArbSelect=Fixed
- 		Status:	InProgress-
- 		VC0:	Caps:	PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- 			Arb:	Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- 			Ctrl:	Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- 			Status:	NegoPending- InProgress-
- 	Capabilities: [128 v1] Power Budgeting <?>
- 	Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?>
- 	Capabilities: [900 v1] #19
- 	Kernel driver in use: nouveau
- 
- 01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1)
- 	Subsystem: eVga.com. Corp. Device [3842:2651]
- 	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 0, Cache Line Size: 64 bytes
- 	Interrupt: pin B routed to IRQ 17
- 	Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K]
- 	Capabilities: [60] Power Management version 3
- 		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- 		Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- 	Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+
- 		Address: 0000000000000000  Data: 0000
- 	Capabilities: [78] Express (v2) Endpoint, MSI 00
- 		DevCap:	MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us
- 			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
- 		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- 			RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+
- 			MaxPayload 128 bytes, MaxReadReq 512 bytes
- 		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
- 		LnkCap:	Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us
- 			ClockPM+ Surprise- LLActRep- BwNot-
- 		LnkCtl:	ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+
- 			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- 		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- 		DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported
- 		DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled
- 		LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1-
- 			 EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest-
- 	Kernel driver in use: snd_hda_intel
- 
- 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10)
- 	Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169]
- 	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- 	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- 	Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes
- 	Interrupt: pin A routed to IRQ 21
- 	Region 0: I/O ports at de00 [size=256]
- 	Region 1: Memory at fdeff000 (32-bit, non-prefetchable) [size=256]
- 	[virtual] Expansion ROM at fde00000 [disabled] [size=128K]
- 	Capabilities: [dc] Power Management version 2
- 		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+)
- 		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- 	Kernel driver in use: r8169
  
  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-12-generic 3.19.0-12.12
  ProcVersionSignature: Ubuntu 3.19.0-12.12-generic 3.19.3
  Uname: Linux 3.19.0-12-generic x86_64
  Annotation: Your system might become unstablenow and might need to be restarted.
  ApportVersion: 2.17-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
-  USER        PID ACCESS COMMAND
-  /dev/snd/controlC1:  chris      1431 F.... pulseaudio
-  /dev/snd/controlC0:  chris      1431 F.... pulseaudio
+  USER        PID ACCESS COMMAND
+  /dev/snd/controlC1:  chris      1431 F.... pulseaudio
+  /dev/snd/controlC0:  chris      1431 F.... pulseaudio
  Date: Tue Apr  7 19:18:50 2015
  Failure: oops
  HibernationDevice: RESUME=UUID=6b93044d-8184-4d0e-a59d-be6f05e7ec45
  InstallationDate: Installed on 2015-03-28 (10 days ago)
  InstallationMedia: Ubuntu-MATE 15.04 "Vivid Vervet" - Beta amd64 (20150326)
  IwConfig:
-  eth0      no wireless extensions.
-  
-  eth1      no wireless extensions.
-  
-  lo        no wireless extensions.
+  eth0      no wireless extensions.
+ 
+  eth1      no wireless extensions.
+ 
+  lo        no wireless extensions.
  MachineType: Dell Inc. Inspiron 530
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-12-generic root=UUID=96efd830-9fa8-4f21-bafa-b076290da0b2 ro rootflags=subvol=@ quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8
  RfKill:
-  
+ 
  SourcePackage: linux
  Title: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [kworker/1:1:5087]
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/24/2009
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.0.18
  dmi.board.name: 0FM586
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: OEM
  dmi.modalias: dmi:bvnDellInc.:bvr1.0.18:bd02/24/2009:svnDellInc.:pnInspiron530:pvr:rvnDellInc.:rn0FM586:rvr:cvnDellInc.:ct3:cvrOEM:
  dmi.product.name: Inspiron 530
  dmi.sys.vendor: Dell Inc.

** Tags added: latest-bios-1.0.18

** Tags added: kernel-bug-exists-upstream-4.0-rc7

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1441387

Title:
  NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s!
  [kworker/1:1:5087]

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  screen saver locked up computer - forced to hard shutdown computer and
  turn back on.

  ProblemType: KernelOops
  DistroRelease: Ubuntu 15.04
  Package: linux-image-3.19.0-12-generic 3.19.0-12.12
  ProcVersionSignature: Ubuntu 3.19.0-12.12-generic 3.19.3
  Uname: Linux 3.19.0-12-generic x86_64
  Annotation: Your system might become unstablenow and might need to be restarted.
  ApportVersion: 2.17-0ubuntu1
  Architecture: amd64
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC1:  chris      1431 F.... pulseaudio
   /dev/snd/controlC0:  chris      1431 F.... pulseaudio
  Date: Tue Apr  7 19:18:50 2015
  Failure: oops
  HibernationDevice: RESUME=UUID=6b93044d-8184-4d0e-a59d-be6f05e7ec45
  InstallationDate: Installed on 2015-03-28 (10 days ago)
  InstallationMedia: Ubuntu-MATE 15.04 "Vivid Vervet" - Beta amd64 (20150326)
  IwConfig:
   eth0      no wireless extensions.

   eth1      no wireless extensions.

   lo        no wireless extensions.
  MachineType: Dell Inc. Inspiron 530
  ProcFB: 0 nouveaufb
  ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-12-generic root=UUID=96efd830-9fa8-4f21-bafa-b076290da0b2 ro rootflags=subvol=@ quiet splash vt.handoff=7
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8
  RfKill:

  SourcePackage: linux
  Title: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [kworker/1:1:5087]
  UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev'
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 02/24/2009
  dmi.bios.vendor: Dell Inc.
  dmi.bios.version: 1.0.18
  dmi.board.name: 0FM586
  dmi.board.vendor: Dell Inc.
  dmi.chassis.type: 3
  dmi.chassis.vendor: Dell Inc.
  dmi.chassis.version: OEM
  dmi.modalias: dmi:bvnDellInc.:bvr1.0.18:bd02/24/2009:svnDellInc.:pnInspiron530:pvr:rvnDellInc.:rn0FM586:rvr:cvnDellInc.:ct3:cvrOEM:
  dmi.product.name: Inspiron 530
  dmi.sys.vendor: Dell Inc.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1441387/+subscriptions


References