kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #113674
[Bug 1446798] Re: ExpressCard type USB3.0 adapter does not function properly
Would it be possible for you to test the latest upstream kernel? Refer
to https://wiki.ubuntu.com/KernelMainlineBuilds . Please test the latest
v4.0 kernel[0].
If this bug is fixed in the mainline kernel, please add the following
tag 'kernel-fixed-upstream'.
If the mainline kernel does not fix this bug, please add the tag:
'kernel-bug-exists-upstream'.
If you are unable to test the mainline kernel, for example it will not boot, please add the tag: 'kernel-unable-to-test-upstream'.
Once testing of the upstream kernel is complete, please mark this bug as "Confirmed".
Thanks in advance.
[0] http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.0-vivid/
** Changed in: linux (Ubuntu)
Importance: Undecided => Medium
** Tags added: regression-update
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1446798
Title:
ExpressCard type USB3.0 adapter does not function properly
Status in linux package in Ubuntu:
Incomplete
Bug description:
ExpressCard type USB3.0 adapter for laptop does not function properly
with the current kernel of Vivid: drives attached to it do not get
reported by the system as attached and cannot get mounted. It does
work on a 14.04 install (32 bit), giving 3x read spead from an
external USB 3.0 drive.
The adapter in question: 2 Port USB3.0 expressCard, UNEC UPD720202 Chip
see here for description http://www.amazon.co.uk/SuperSpeed-compatible-transfer-Notebook-internal/dp/B00K49TNUU
Upon inserting the adapter dmesg displays this information:
[ 9095.296966] pci 0000:05:00.0: [1912:0015] type 00 class 0x0c0330
[ 9095.297051] pci 0000:05:00.0: reg 0x10: [mem 0x00000000-0x00001fff 64bit]
[ 9095.297426] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
[ 9095.304643] pci 0000:05:00.0: BAR 0: assigned [mem 0xf1c00000-0xf1c01fff 64bit]
[ 9095.304738] pci 0000:05:00.0: enabling device (0000 -> 0002)
[ 9095.305384] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 9095.305406] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 3
[ 9095.311315] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 9095.311327] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9095.311335] usb usb3: Product: xHCI Host Controller
[ 9095.311342] usb usb3: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
[ 9095.311349] usb usb3: SerialNumber: 0000:05:00.0
[ 9095.311881] hub 3-0:1.0: USB hub found
[ 9095.311957] hub 3-0:1.0: 2 ports detected
[ 9095.312407] xhci_hcd 0000:05:00.0: xHCI Host Controller
[ 9095.312422] xhci_hcd 0000:05:00.0: new USB bus registered, assigned bus number 4
[ 9095.314347] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 9095.314357] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 9095.314365] usb usb4: Product: xHCI Host Controller
[ 9095.314372] usb usb4: Manufacturer: Linux 3.19.0-15-generic xhci-hcd
[ 9095.314379] usb usb4: SerialNumber: 0000:05:00.0
[ 9095.314895] hub 4-0:1.0: USB hub found
[ 9095.314973] hub 4-0:1.0: 2 ports detected
dmesg upon inserting usb3.0 external hard drive (ADATA) into one of
the ports of ExpressCard adapter:
[ 9176.313022] usb 4-2: new SuperSpeed USB device number 2 using xhci_hcd
[ 9176.334581] usb 4-2: New USB device found, idVendor=125f, idProduct=a13a
[ 9176.334591] usb 4-2: New USB device strings: Mfr=2, Product=3, SerialNumber=1
[ 9176.334597] usb 4-2: Product: NH13
[ 9176.334601] usb 4-2: Manufacturer: ADATA
[ 9176.334606] usb 4-2: SerialNumber: 12041076060229000009
[ 9176.336521] usb-storage 4-2:1.0: USB Mass Storage device detected
[ 9176.336972] scsi host9: usb-storage 4-2:1.0
BUT the drive does not appear as an attached device.
If I boot the computer with the expresscard inserted and the external
drive attached, I do get to see it in the new device notifier, but I
still cannot mount it.
Besides, trying to use the adapter results in the computer being
unable to suspend (the screen blackens out, but the machine does not
go to sleep) and problems shutting it down.
I would gladly provide any required information and do more tests if
needed, just tell me what to do.
ProblemType: Bug
DistroRelease: Ubuntu 15.04
Package: linux-image-3.19.0-15-generic 3.19.0-15.15
ProcVersionSignature: Ubuntu 3.19.0-15.15-generic 3.19.3
Uname: Linux 3.19.0-15-generic x86_64
ApportVersion: 2.17.2-0ubuntu1
Architecture: amd64
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: dg 1435 F.... pulseaudio
CurrentDesktop: KDE
Date: Tue Apr 21 20:53:33 2015
EcryptfsInUse: Yes
InstallationDate: Installed on 2015-04-05 (15 days ago)
InstallationMedia: Kubuntu 15.04 "Vivid Vervet" - Beta amd64 (20150403)
MachineType: LENOVO 4298A12
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.19.0-15-generic root=UUID=bb4491a9-508a-492c-8fd7-9707fe9818ef ro quiet splash vt.handoff=7
RelatedPackageVersions:
linux-restricted-modules-3.19.0-15-generic N/A
linux-backports-modules-3.19.0-15-generic N/A
linux-firmware 1.143
SourcePackage: linux
UdevLog: Error: [Errno 2] Toks failas ar aplankas neegzistuoja: '/var/log/udev'
UpgradeStatus: No upgrade log present (probably fresh install)
dmi.bios.date: 10/18/2011
dmi.bios.vendor: LENOVO
dmi.bios.version: 8DET54WW (1.24 )
dmi.board.asset.tag: Not Available
dmi.board.name: 4298A12
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr8DET54WW(1.24):bd10/18/2011:svnLENOVO:pn4298A12:pvrThinkPadX220Tablet:rvnLENOVO:rn4298A12:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 4298A12
dmi.product.version: ThinkPad X220 Tablet
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1446798/+subscriptions
References