← Back to team overview

kernel-packages team mailing list archive

[Bug 1453800] Re: updates end up with error 2

 

sudo apt-get install -f
sudo apt-get clean
sudo apt-get update

Then re-install the package.

If that does not resolve your issue, please mark the bug as "Confirmed"


** Changed in: linux (Ubuntu)
   Importance: Undecided => Low

** Changed in: linux (Ubuntu)
       Status: Confirmed => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1453800

Title:
  updates end up with error 2

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Description:	Ubuntu 10.04.4 LTS
  Release:	10.04

  Ubuntu 2.6.32-74.142-generic 2.6.32.63+drm33.26

  00:00.0 Host bridge [0600]: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580] (rev 04)
  	Subsystem: Intel Corporation 82915G/P/GV/GL/PL/910GL Memory Controller Hub [8086:2580]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  	Latency: 0
  	Capabilities: [e0] Vendor Specific Information <?>
  	Kernel modules: intel-agp

  00:01.0 PCI bridge [0604]: Intel Corporation 82915G/P/GV/GL/PL/910GL PCI Express Root Port [8086:2581] (rev 04)
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 32 bytes
  	Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
  	I/O behind bridge: 0000c000-0000cfff
  	Memory behind bridge: c8000000-d7ffffff
  	Prefetchable memory behind bridge: 80000000-800fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [88] Subsystem: Intel Corporation Device [8086:0000]
  	Capabilities: [80] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  		Address: fee0300c  Data: 4169
  	Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  			ExtTag- RBE- FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  		LnkCap:	Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <1us, L1 <4us
  			ClockPM- Suprise- LLActRep- BwNot-
  		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
  			Slot #  0, PowerLimit 75.000000; Interlock- NoCompl-
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Off, PwrInd On, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
  			Changed: MRL- PresDet+ LinkState-
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  	Capabilities: [100] Virtual Channel <?>
  	Capabilities: [140] Root Complex Link <?>
  	Kernel driver in use: pcieport
  	Kernel modules: shpchp

  00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 03)
  	Subsystem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) High Definition Audio Controller [8086:2668]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 32 bytes
  	Interrupt: pin A routed to IRQ 16
  	Region 0: Memory at d8100000 (64-bit, non-prefetchable) [size=16K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  		Address: 0000000000000000  Data: 0000
  	Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
  			ExtTag- RBE- FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
  			ClockPM- Suprise- LLActRep- BwNot-
  		LnkCtl:	ASPM Disabled; Disabled- Retrain- CommClk-
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
  	Capabilities: [100] Virtual Channel <?>
  	Capabilities: [130] Root Complex Link <?>
  	Kernel driver in use: HDA Intel
  	Kernel modules: snd-hda-intel

  00:1c.0 PCI bridge [0604]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660] (rev 03)
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 32 bytes
  	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
  	I/O behind bridge: 00001000-00001fff
  	Memory behind bridge: 80100000-802fffff
  	Prefetchable memory behind bridge: 0000000080300000-00000000804fffff
  	Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s unlimited, L1 unlimited
  			ExtTag+ RBE- FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
  		LnkCap:	Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
  			ClockPM- Suprise- LLActRep- BwNot-
  		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  		SltCap:	AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surpise+
  			Slot # 10, PowerLimit 10.000000; Interlock- NoCompl-
  		SltCtl:	Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
  			Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
  		SltSta:	Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
  			Changed: MRL- PresDet- LinkState-
  		RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible-
  		RootCap: CRSVisible-
  		RootSta: PME ReqID 0000, PMEStatus- PMEPending-
  	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
  		Address: fee0300c  Data: 4171
  	Capabilities: [90] Subsystem: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) PCI Express Port 1 [8086:2660]
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [100] Virtual Channel <?>
  	Capabilities: [180] Root Complex Link <?>
  	Kernel driver in use: pcieport
  	Kernel modules: shpchp

  00:1d.0 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #1 [8086:2658] (rev 03)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 23
  	Region 4: I/O ports at e300 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.1 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #2 [8086:2659] (rev 03)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 19
  	Region 4: I/O ports at e000 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.2 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #3 [8086:265a] (rev 03)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin C routed to IRQ 18
  	Region 4: I/O ports at e100 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.3 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB UHCI #4 [8086:265b] (rev 03)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin D routed to IRQ 16
  	Region 4: I/O ports at e200 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.7 USB Controller [0c03]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) USB2 EHCI Controller [8086:265c] (rev 03) (prog-if 20)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 23
  	Region 0: Memory at d8104000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: ehci_hcd

  00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev d3) (prog-if 01)
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
  	I/O behind bridge: 0000d000-0000dfff
  	Memory behind bridge: d8000000-d80fffff
  	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
  	Capabilities: [50] Subsystem: Intel Corporation 82801 PCI Bridge [8086:244e]

  00:1f.0 ISA bridge [0601]: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640] (rev 03)
  	Subsystem: Intel Corporation 82801FB/FR (ICH6/ICH6R) LPC Interface Bridge [8086:2640]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Kernel modules: iTCO_wdt, intel-rng

  00:1f.1 IDE interface [0101]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) IDE Controller [8086:266f] (rev 03) (prog-if 8a [Master SecP PriP])
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 18
  	Region 0: I/O ports at 01f0 [size=8]
  	Region 1: I/O ports at 03f4 [size=1]
  	Region 2: I/O ports at 0170 [size=8]
  	Region 3: I/O ports at 0374 [size=1]
  	Region 4: I/O ports at f000 [size=16]
  	Kernel driver in use: ata_piix

  00:1f.2 IDE interface [0101]: Intel Corporation 82801FB/FW (ICH6/ICH6W) SATA Controller [8086:2651] (rev 03) (prog-if 8f [Master SecP SecO PriP PriO])
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 19
  	Region 0: I/O ports at e400 [size=8]
  	Region 1: I/O ports at e500 [size=4]
  	Region 2: I/O ports at e600 [size=8]
  	Region 3: I/O ports at e700 [size=4]
  	Region 4: I/O ports at e800 [size=16]
  	Capabilities: [70] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: ata_piix

  00:1f.3 SMBus [0c05]: Intel Corporation 82801FB/FBM/FR/FW/FRW (ICH6 Family) SMBus Controller [8086:266a] (rev 03)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:7091]
  	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Interrupt: pin B routed to IRQ 11
  	Region 4: I/O ports at 0500 [size=32]
  	Kernel modules: i2c-i801

  01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] [1002:5e4b]
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:1780]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0, Cache Line Size: 32 bytes
  	Interrupt: pin A routed to IRQ 26
  	Region 0: Memory at c8000000 (64-bit, prefetchable) [size=128M]
  	Region 2: Memory at d0030000 (64-bit, non-prefetchable) [size=64K]
  	Region 4: I/O ports at c000 [size=256]
  	[virtual] Expansion ROM at 80000000 [disabled] [size=128K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Express (v1) Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
  			ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
  			ClockPM- Suprise- LLActRep- BwNot-
  		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
  	Capabilities: [80] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
  		Address: 00000000fee0200c  Data: 4189
  	Kernel driver in use: radeon
  	Kernel modules: radeon

  01:00.1 Display controller [0380]: ATI Technologies Inc RV410 [Radeon X700 Pro (PCIE)] (Secondary) [1002:5e6b]
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:1781]
  	Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Region 0: Memory at d0020000 (64-bit, non-prefetchable) [disabled] [size=64K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Express (v1) Endpoint, MSI 00
  		DevCap:	MaxPayload 128 bytes, PhantFunc 0, Latency L0s <128ns, L1 <2us
  			ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
  		DevCtl:	Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
  			RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
  			MaxPayload 128 bytes, MaxReadReq 128 bytes
  		DevSta:	CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
  		LnkCap:	Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency L0 <128ns, L1 <1us
  			ClockPM- Suprise- LLActRep- BwNot-
  		LnkCtl:	ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
  			ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
  		LnkSta:	Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-

  03:01.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
  	Subsystem: Hyperparallel Technologies Device [1210:0001]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32
  	Interrupt: pin A routed to IRQ 17
  	Region 0: Memory at d8000000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [40] Power Management version 1
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: saa7134
  	Kernel modules: saa7134

  03:03.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:091d]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32 (8000ns max), Cache Line Size: 32 bytes
  	Interrupt: pin A routed to IRQ 19
  	Region 0: Memory at d8001000 (32-bit, non-prefetchable) [size=2K]
  	Region 1: I/O ports at d000 [size=128]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: ohci1394
  	Kernel modules: firewire-ohci, ohci1394

  03:04.0 Multimedia controller [0480]: Philips Semiconductors SAA7134/SAA7135HL Video Broadcast Decoder [1131:7134] (rev 01)
  	Subsystem: Creatix Polymedia GmbH Device [16be:0005]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32 (21000ns min, 8000ns max)
  	Interrupt: pin A routed to IRQ 20
  	Region 0: Memory at d8002000 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [40] Power Management version 1
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 PME-Enable- DSel=0 DScale=1 PME-
  	Kernel driver in use: saa7134
  	Kernel modules: saa7134

  03:05.0 Communication controller [0780]: Agere Systems V.92 56K WinModem [11c1:048c] (rev 03)
  	Subsystem: Agere Systems Device [11c1:044c]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32 (63000ns min, 3500ns max)
  	Interrupt: pin A routed to IRQ 11
  	Region 0: Memory at d8003000 (32-bit, non-prefetchable) [size=256]
  	Region 1: I/O ports at d100 [size=8]
  	Region 2: I/O ports at d200 [size=256]
  	Capabilities: [f8] Power Management version 2
  		Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=160mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-

  03:06.0 Ethernet controller [0200]: VIA Technologies, Inc. VT6105/VT6106S [Rhine-III] [1106:3106] (rev 8b)
  	Subsystem: Micro-Star International Co., Ltd. Device [1462:091c]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 32 (750ns min, 2000ns max), Cache Line Size: 32 bytes
  	Interrupt: pin A routed to IRQ 18
  	Region 0: I/O ports at d300 [size=256]
  	Region 1: Memory at d8004000 (32-bit, non-prefetchable) [size=256]
  	Capabilities: [44] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: via-rhine
  	Kernel modules: via-rhine

  ProblemType: Package
  DistroRelease: Ubuntu 10.04
  Package: linux-image-2.6.32-73-generic 2.6.32-73.141
  Regression: No
  Reproducible: Yes
  ProcVersionSignature: Ubuntu 2.6.32-74.142-generic 2.6.32.63+drm33.26
  Uname: Linux 2.6.32-74-generic i686
  NonfreeKernelModules: tusbd
  AlsaVersion: Advanced Linux Sound Architecture Driver Version 1.0.21.
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  woi        2907 F.... pulseaudio
  CRDA: Error: [Errno 2] Datei oder Verzeichnis nicht gefunden
  Card0.Amixer.info:
   Card hw:0 'Intel'/'HDA Intel at 0xd8100000 irq 16'
     Mixer name	: 'C-Media CMI9880'
     Components	: 'HDA:434d4980,70911462,00090402'
     Controls      : 22
     Simple ctrls  : 13
  Card1.Amixer.info:
   Card hw:1 'SAA7134'/'saa7134[0] at 0xd8000000 irq 17'
     Mixer name	: 'SAA7134 Mixer'
     Components	: ''
     Controls      : 6
     Simple ctrls  : 3
  Card2.Amixer.info:
   Card hw:2 'SAA7134_1'/'saa7134[1] at 0xd8002000 irq 20'
     Mixer name	: 'SAA7134 Mixer'
     Components	: ''
     Controls      : 6
     Simple ctrls  : 3
  Date: Mon May 11 13:56:59 2015
  DpkgTerminalLog:
   
  ErrorMessage: Unterprozess installiertes post-installation-Skript gab den Fehlerwert 2 zurück
  HibernationDevice: RESUME=UUID=42b7d956-1957-4a05-87a4-146e32824bd8
  MachineType: MEDIONPC MS-7091
  ProcCmdLine: BOOT_IMAGE=/boot/vmlinuz-2.6.32-74-generic root=UUID=fff2c08b-8ec8-4d95-9e5a-4d109cc25e8a ro quiet splash
  RelatedPackageVersions: linux-firmware 1.34.14
  RfKill:
   0: hci0: Bluetooth
   	Soft blocked: no
   	Hard blocked: no
  SourcePackage: linux
  StagingDrivers: usbip vhci_hcd usbip_common_mod
  Title: [STAGING]
  dmi.bios.date: 01/27/2005
  dmi.bios.vendor: Phoenix Technologies, LTD
  dmi.bios.version: 6.00 PG
  dmi.board.name: MS-7091
  dmi.board.vendor: MICRO-STAR INTERNATIONAL CO., LTD
  dmi.chassis.type: 3
  dmi.modalias: dmi:bvnPhoenixTechnologies,LTD:bvr6.00PG:bd01/27/2005:svnMEDIONPC:pnMS-7091:pvr:rvnMICRO-STARINTERNATIONALCO.,LTD:rnMS-7091:rvr:cvn:ct3:cvr:
  dmi.product.name: MS-7091
  dmi.sys.vendor: MEDIONPC

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1453800/+subscriptions


Follow ups

References