← Back to team overview

kernel-packages team mailing list archive

[Bug 1454013] Re: Booting takes very long time on Intel Braswell caused by eMMC

 

** Tags added: verification-done-trusty

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1454013

Title:
  Booting takes very long time on Intel Braswell caused by eMMC

Status in HWE Next Project:
  In Progress
Status in linux package in Ubuntu:
  In Progress
Status in linux source package in Trusty:
  Fix Committed
Status in linux source package in Utopic:
  Fix Committed
Status in linux source package in Vivid:
  Fix Committed
Status in linux source package in Wily:
  In Progress

Bug description:
  This patch could fix this issue, otherwise booting will take very long
  time.

  
  4e93b9a6abc0d028daf3c8a00cb77b679d8a4df4
  mmc: card: Don't access RPMB partitions for normal read/write
  During kernel boot, it will try to read some logical sectors
  of each block device node for the possible partition table.

  But since RPMB partition is special and can not be accessed
  by normal eMMC read / write CMDs, it will cause below error
  messages during kernel boot:
  ...
   mmc0: Got data interrupt 0x00000002 even though no data operation was in progress.
   mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00
   mmcblk0rpmb: retrying using single block read
   mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
   mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
   mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
   mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
   mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
   mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
   end_request: I/O error, dev mmcblk0rpmb, sector 0
   Buffer I/O error on device mmcblk0rpmb, logical block 0
   end_request: I/O error, dev mmcblk0rpmb, sector 8
   Buffer I/O error on device mmcblk0rpmb, logical block 1
   end_request: I/O error, dev mmcblk0rpmb, sector 16
   Buffer I/O error on device mmcblk0rpmb, logical block 2
   end_request: I/O error, dev mmcblk0rpmb, sector 24
   Buffer I/O error on device mmcblk0rpmb, logical block 3
  ...

  This patch will discard the access request in eMMC queue if
  it is RPMB partition access request. By this way, it avoids
  trigger above error messages.

  Fixes: 090d25fe224c ("mmc: core: Expose access to RPMB partition")
  Signed-off-by: Yunpeng Gao <yunpeng.gao@xxxxxxxxx>
  Signed-off-by: Chuanxiao Dong <chuanxiao.dong@xxxxxxxxx>
  Tested-by: Michael Shigorin <mike@xxxxxxxxxxxx>
  Signed-off-by: Ulf Hansson <ulf.hansson@xxxxxxxxxx>

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1454013/+subscriptions


References