kernel-packages team mailing list archive

Thread
Date
[Bug 1456738] Status changed to Confirmed

To: kernel-packages@xxxxxxxxxxxxxxxxxxx
From: Brad Figg <brad.figg@xxxxxxxxxxxxx>
Date: Tue, 19 May 2015 18:00:06 -0000
Reply-to: Bug 1456738 <1456738@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
This change was made by a bot.

** Changed in: linux (Ubuntu)
       Status: New => Confirmed

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1456738

Title:
  package linux-image-3.13.0-52-generic 3.13.0-52.86 failed to
  install/upgrade: subprocess installed post-installation script
  returned error exit status 2

Status in linux package in Ubuntu:
  Confirmed

Bug description:
  Failure since ....3.13-0-51-generic

  version log:
  Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17

  lspci -vnvn.log:
  00:00.0 Host bridge [0600]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface [8086:2560] (rev 03)
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
  	Latency: 0
  	Region 0: Memory at c0000000 (32-bit, prefetchable) [size=256M]
  	Capabilities: [e4] Vendor Specific Information: Len=05 <?>
  	Capabilities: [a0] AGP version 2.0
  		Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  		Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
  	Kernel driver in use: agpgart-intel

  00:01.0 PCI bridge [0604]: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE Host-to-AGP Bridge [8086:2561] (rev 03) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 64
  	Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
  	I/O behind bridge: 0000b000-0000bfff
  	Memory behind bridge: dfd00000-dfdfffff
  	Prefetchable memory behind bridge: afc00000-bfbfffff
  	Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
  	BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  00:1d.0 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 02) (prog-if 00 [UHCI])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 16
  	Region 4: I/O ports at df20 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.1 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 02) (prog-if 00 [UHCI])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 19
  	Region 4: I/O ports at df40 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.2 USB controller [0c03]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 02) (prog-if 00 [UHCI])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin C routed to IRQ 18
  	Region 4: I/O ports at df80 [size=32]
  	Kernel driver in use: uhci_hcd

  00:1d.7 USB controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller [8086:24cd] (rev 02) (prog-if 20 [EHCI])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin D routed to IRQ 23
  	Region 0: Memory at dffffc00 (32-bit, non-prefetchable) [size=1K]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Capabilities: [58] Debug port: BAR=1 offset=0080
  	Kernel driver in use: ehci-pci

  00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 82) (prog-if 00 [Normal decode])
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR+ INTx-
  	Latency: 0
  	Bus: primary=00, secondary=02, subordinate=06, sec-latency=64
  	I/O behind bridge: 0000c000-0000cfff
  	Memory behind bridge: dfe00000-dfefffff
  	Prefetchable memory behind bridge: 80000000-83ffffff
  	Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
  	BridgeCtl: Parity- SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
  		PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-

  00:1f.0 ISA bridge [0601]: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge [8086:24c0] (rev 02)
  	Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Kernel driver in use: lpc_ich

  00:1f.1 IDE interface [0101]: Intel Corporation 82801DB (ICH4) IDE Controller [8086:24cb] (rev 02) (prog-if 8a [Master SecP PriP])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin A routed to IRQ 18
  	Region 0: I/O ports at 01f0 [size=8]
  	Region 1: I/O ports at 03f4
  	Region 2: I/O ports at 0170 [size=8]
  	Region 3: I/O ports at 0374
  	Region 4: I/O ports at ffa0 [size=16]
  	Region 5: Memory at 84000000 (32-bit, non-prefetchable) [size=1K]
  	Kernel driver in use: ata_piix

  00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller [8086:24c3] (rev 02)
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Interrupt: pin B routed to IRQ 0
  	Region 4: I/O ports at 0540 [size=32]

  00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 02)
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 0
  	Interrupt: pin B routed to IRQ 17
  	Region 0: I/O ports at e000 [size=256]
  	Region 1: I/O ports at e100 [size=64]
  	Region 2: Memory at 84000400 (32-bit, non-prefetchable) [size=512]
  	Region 3: Memory at 84000600 (32-bit, non-prefetchable) [size=256]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: snd_intel8x0

  00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Modem Controller [8086:24c6] (rev 02) (prog-if 00 [Generic])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Interrupt: pin B routed to IRQ 17
  	Region 0: I/O ports at e200 [size=256]
  	Region 1: I/O ports at e300 [size=128]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-

  01:00.0 VGA compatible controller [0300]: Advanced Micro Devices, Inc. [AMD/ATI] RV250/M9 GL [Mobility FireGL 9000/Radeon 9000] [1002:4c66] (rev 01) (prog-if 00 [VGA controller])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 64 (2000ns min), Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 16
  	Region 0: Memory at b0000000 (32-bit, prefetchable) [size=128M]
  	Region 1: I/O ports at b000 [size=256]
  	Region 2: Memory at dfdf0000 (32-bit, non-prefetchable) [size=64K]
  	Expansion ROM at dfdc0000 [disabled] [size=128K]
  	Capabilities: [58] AGP version 2.0
  		Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW+ AGP3- Rate=x1,x2,x4
  		Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: radeon

  02:03.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972]
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 168
  	Interrupt: pin A routed to IRQ 17
  	Region 0: Memory at 88000000 (32-bit, non-prefetchable) [size=4K]
  	Bus: primary=02, secondary=03, subordinate=06, sec-latency=176
  	Memory window 0: 80000000-83ffffff (prefetchable)
  	Memory window 1: 8c000000-8fffffff
  	I/O window 0: 0000c000-0000c0ff
  	I/O window 1: 0000c400-0000c4ff
  	BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt- PostWrite+
  	16-bit legacy interface ports at 0001
  	Capabilities: [a0] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
  		Bridge: PM- B3+
  	Kernel driver in use: yenta_cardbus

  02:0a.0 FireWire (IEEE 1394) [0c00]: VIA Technologies, Inc. VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller [1106:3044] (rev 80) (prog-if 10 [OHCI])
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 64 (8000ns max), Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 18
  	Region 0: Memory at dfeff800 (32-bit, non-prefetchable) [size=2K]
  	Region 1: I/O ports at cc00 [size=128]
  	Capabilities: [50] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: firewire_ohci

  02:0c.0 Ethernet controller [0200]: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller [100b:0020]
  	Subsystem: Fujitsu Technology Solutions Device [1734:102a]
  	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 64 (2750ns min, 13000ns max)
  	Interrupt: pin A routed to IRQ 17
  	Region 0: I/O ports at c800 [size=256]
  	Region 1: Memory at dfefe000 (32-bit, non-prefetchable) [size=4K]
  	Expansion ROM at dfee0000 [disabled] [size=64K]
  	Capabilities: [40] Power Management version 2
  		Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=320mA PME(D0+,D1+,D2+,D3hot+,D3cold+)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
  	Kernel driver in use: natsemi

  03:00.0 Ethernet controller [0200]: Qualcomm Atheros AR5212/AR5213 Wireless Network Adapter [168c:0013] (rev 01)
  	Subsystem: Actiontec Electronics Inc IBM HighRate 11 a/b/g Wireless CardBus Adapter [1668:1026]
  	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
  	Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
  	Latency: 168 (2500ns min, 7000ns max), Cache Line Size: 64 bytes
  	Interrupt: pin A routed to IRQ 17
  	Region 0: Memory at 8c000000 (32-bit, non-prefetchable) [size=64K]
  	Capabilities: [44] Power Management version 2
  		Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
  		Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
  	Kernel driver in use: ath5k

  ProblemType: Package
  DistroRelease: Ubuntu 14.04
  Package: linux-image-3.13.0-52-generic 3.13.0-52.86
  ProcVersionSignature: Ubuntu 3.13.0-49.81-generic 3.13.11-ckt17
  Uname: Linux 3.13.0-49-generic i686
  ApportVersion: 2.14.1-0ubuntu3.10
  Architecture: i386
  AudioDevicesInUse:
   USER        PID ACCESS COMMAND
   /dev/snd/controlC0:  klaus      2289 F.... pulseaudio
  Date: Tue May 19 19:15:16 2015
  DuplicateSignature: package:linux-image-3.13.0-52-generic:3.13.0-52.86:subprocess installed post-installation script returned error exit status 2
  ErrorMessage: subprocess installed post-installation script returned error exit status 2
  HibernationDevice: RESUME=UUID=05097382-4bdf-4e8d-81ee-476116efcd27
  InstallationDate: Installed on 2014-09-13 (248 days ago)
  InstallationMedia: Ubuntu 14.04.1 LTS "Trusty Tahr" - Release i386 (20140722.2)
  Lsusb:
   Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
   Bus 004 Device 002: ID 413c:3010 Dell Computer Corp. Optical Wheel Mouse
   Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
   Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
  MachineType: FUJITSU SIEMENS Amilo D Series
  PccardctlIdent:
   Socket 0:
     no product info available
  PccardctlStatus:
   Socket 0:
     3.3V
    32-bit
    PC Card
  ProcFB: 0 radeondrmfb
  ProcKernelCmdLine: BOOT_IMAGE=/vmlinuz-3.13.0-49-generic root=/dev/mapper/ubuntu--vg-root ro drm.debug=0xe plymouth:debug
  PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon.
  RelatedPackageVersions: grub-pc 2.02~beta2-9ubuntu1.1
  RfKill:
   0: phy0: Wireless LAN
   	Soft blocked: no
   	Hard blocked: no
  SourcePackage: linux
  Title: package linux-image-3.13.0-52-generic 3.13.0-52.86 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
  UpgradeStatus: No upgrade log present (probably fresh install)
  dmi.bios.date: 11/19/2003
  dmi.bios.vendor: American Megatrends Inc.
  dmi.bios.version: 1.08
  dmi.board.name: 755IA5
  dmi.board.vendor: Uniwill
  dmi.chassis.type: 10
  dmi.chassis.vendor: FUJITSU SIEMENS
  dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr1.08:bd11/19/2003:svnFUJITSUSIEMENS:pnAmiloDSeries:pvr:rvnUniwill:rn755IA5:rvr:cvnFUJITSUSIEMENS:ct10:cvr:
  dmi.product.name: Amilo D Series
  dmi.sys.vendor: FUJITSU SIEMENS

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1456738/+subscriptions
References

[Bug 1456738] [NEW] package linux-image-3.13.0-52-generic 3.13.0-52.86 failed to install/upgrade: subprocess installed post-installation script returned error exit status 2
From: Klaus Dorbath, 2015-05-19