kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #12469
[Bug 1221534] Re: [LENOVO 7453W75] suspend/resume failure
yositune, as per http://download.lenovo.com/express/ddfm.html an update
is available for your BIOS (3.21). If you update to this, does it change
anything?
If not, could you please both specify what happened, and provide the output of the following terminal command:
sudo dmidecode -s bios-version && sudo dmidecode -s bios-release-date
Please note your current BIOS is already in the Bug Description, so
posting this on the old BIOS would not be helpful.
Thank you for your understanding.
** Description changed:
- Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
- Description: Ubuntu Saucy Salamander (development branch)
- Release: 13.10
-
- yositune@arashi:~$ sudo lspci -vnvn
- 00:00.0 Host bridge [0600]: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub [8086:2a40] (rev 07)
- Subsystem: Lenovo Device [17aa:20e0]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0a <?>
- Kernel driver in use: agpgart-intel
-
- 00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a42] (rev 07) (prog-if 00 [VGA controller])
- Subsystem: Lenovo Device [17aa:20e4]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 46
- Region 0: Memory at f2000000 (64-bit, non-prefetchable) [size=4M]
- Region 2: Memory at d0000000 (64-bit, prefetchable) [size=256M]
- Region 4: I/O ports at 1800 [size=8]
- Expansion ROM at <unassigned> [disabled]
- Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 4162
- Capabilities: [d0] Power Management version 3
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Kernel driver in use: i915
-
- 00:02.1 Display controller [0380]: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller [8086:2a43] (rev 07)
- Subsystem: Lenovo Device [17aa:20e4]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Region 0: Memory at f2400000 (64-bit, non-prefetchable) [size=1M]
- Capabilities: [d0] Power Management version 3
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
-
- 00:03.0 Communication controller [0780]: Intel Corporation Mobile 4 Series Chipset MEI Controller [8086:2a44] (rev 07)
- Subsystem: Lenovo Device [17aa:20e6]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 45
- Region 0: Memory at f2826800 (64-bit, non-prefetchable) [size=16]
- Capabilities: [50] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [8c] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0300c Data: 4152
- Kernel driver in use: mei_me
-
- 00:03.3 Serial controller [0700]: Intel Corporation Mobile 4 Series Chipset AMT SOL Redirection [8086:2a47] (rev 07) (prog-if 02 [16550])
- Subsystem: Lenovo Device [17aa:20ec]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 17
- Region 0: I/O ports at 1830 [size=8]
- Region 1: Memory at f2624000 (32-bit, non-prefetchable) [size=4K]
- Capabilities: [c8] Power Management version 3
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [d0] MSI: Enable- Count=1/1 Maskable- 64bit+
- Address: 0000000000000000 Data: 0000
- Kernel driver in use: serial
-
- 00:19.0 Ethernet controller [0200]: Intel Corporation 82567LM Gigabit Network Connection [8086:10f5] (rev 03)
- Subsystem: Lenovo Device [17aa:20ee]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 43
- Region 0: Memory at f2600000 (32-bit, non-prefetchable) [size=128K]
- Region 1: Memory at f2625000 (32-bit, non-prefetchable) [size=4K]
- Region 2: I/O ports at 1840 [size=32]
- Capabilities: [c8] Power Management version 2
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME-
- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0200c Data: 41a2
- Capabilities: [e0] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: e1000e
-
- 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Lenovo Device [17aa:20f0]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 20
- Region 4: I/O ports at 1860 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
-
- 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Lenovo Device [17aa:20f0]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 21
- Region 4: I/O ports at 1880 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
-
- 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Lenovo Device [17aa:20f0]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 22
- Region 4: I/O ports at 18a0 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
-
- 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 03) (prog-if 20 [EHCI])
- Subsystem: Lenovo Device [17aa:20f1]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 23
- Region 0: Memory at f2826c00 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Capabilities: [98] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ehci-pci
-
- 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 03)
- Subsystem: Lenovo Device [17aa:20f2]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin B routed to IRQ 48
- Region 0: Memory at f2620000 (64-bit, non-prefetchable) [size=16K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0300c Data: 4182
- Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE- FLReset+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency L0 <64ns, L1 <1us
- ClockPM- Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed- WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable- ID=0 ArbSelect=Fixed TC/VC=00
- Status: NegoPending- InProgress-
- Capabilities: [130 v1] Root Complex Link
- Desc: PortNumber=0f ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: snd_hda_intel
-
- 00:1c.0 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 [8086:2940] (rev 03) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
- I/O behind bridge: 00003000-00003fff
- Memory behind bridge: bc000000-bc1fffff
- Prefetchable memory behind bridge: 00000000bc200000-00000000bc3fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #0, PowerLimit 6.500W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 41c1
- Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=ff
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=01 ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: pcieport
-
- 00:1c.1 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 [8086:2942] (rev 03) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
- I/O behind bridge: 00004000-00004fff
- Memory behind bridge: f2500000-f25fffff
- Prefetchable memory behind bridge: 00000000bc400000-00000000bc5fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <256ns, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #1, PowerLimit 6.500W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt+ HPIrq+ LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock-
- Changed: MRL- PresDet- LinkState+
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 41d1
- Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=02 ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: pcieport
-
- 00:1c.3 PCI bridge [0604]: Intel Corporation 82801I (ICH9 Family) PCI Express Port 4 [8086:2946] (rev 03) (prog-if 00 [Normal decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Bus: primary=00, secondary=05, subordinate=0c, sec-latency=0
- I/O behind bridge: 00002000-00002fff
- Memory behind bridge: f0000000-f1ffffff
- Prefetchable memory behind bridge: 00000000f2900000-00000000f29fffff
- Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
- ExtTag- RBE+ FLReset-
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
- LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <1us, L1 <4us
- ClockPM- Surprise- LLActRep+ BwNot-
- LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- Retrain- CommClk-
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+ Surprise+
- Slot #3, PowerLimit 6.500W; Interlock- NoCompl-
- SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
- Control: AttnInd Unknown, PwrInd Unknown, Power- Interlock-
- SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
- Changed: MRL- PresDet- LinkState-
- RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
- RootCap: CRSVisible-
- RootSta: PME ReqID 0000, PMEStatus- PMEPending-
- Capabilities: [80] MSI: Enable+ Count=1/1 Maskable- 64bit-
- Address: fee0300c Data: 41e1
- Capabilities: [90] Subsystem: Lenovo Device [17aa:20f3]
- Capabilities: [a0] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [100 v1] Virtual Channel
- Caps: LPEVC=0 RefClk=100ns PATEntryBits=1
- Arb: Fixed+ WRR32- WRR64- WRR128-
- Ctrl: ArbSelect=Fixed
- Status: InProgress-
- VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans-
- Arb: Fixed+ WRR32- WRR64- WRR128- TWRR128- WRR256-
- Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01
- Status: NegoPending- InProgress-
- Capabilities: [180 v1] Root Complex Link
- Desc: PortNumber=04 ComponentID=02 EltType=Config
- Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+
- Addr: 00000000fed1c000
- Kernel driver in use: pcieport
-
- 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Lenovo Device [17aa:20f0]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 16
- Region 4: I/O ports at 18c0 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
-
- 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Lenovo Device [17aa:20f0]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 17
- Region 4: I/O ports at 18e0 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
-
- 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 03) (prog-if 00 [UHCI])
- Subsystem: Lenovo Device [17aa:20f0]
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin C routed to IRQ 18
- Region 4: I/O ports at 1c00 [size=32]
- Capabilities: [50] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: uhci_hcd
-
- 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 03) (prog-if 20 [EHCI])
- Subsystem: Lenovo Device [17aa:20f1]
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin D routed to IRQ 19
- Region 0: Memory at f2827000 (32-bit, non-prefetchable) [size=1K]
- Capabilities: [50] Power Management version 2
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [58] Debug port: BAR=1 offset=00a0
- Capabilities: [98] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ehci-pci
-
- 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge [8086:2448] (rev 93) (prog-if 01 [Subtractive decode])
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Bus: primary=00, secondary=0d, subordinate=0d, sec-latency=0
- Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
- BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-
- PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
- Capabilities: [50] Subsystem: Lenovo Device [17aa:20f4]
-
- 00:1f.0 ISA bridge [0601]: Intel Corporation ICH9M-E LPC Interface Controller [8086:2917] (rev 03)
- Subsystem: Lenovo Device [17aa:20f5]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Capabilities: [e0] Vendor Specific Information: Len=0c <?>
- Kernel driver in use: lpc_ich
-
- 00:1f.2 SATA controller [0106]: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] [8086:2929] (rev 03) (prog-if 01 [AHCI 1.0])
- Subsystem: Lenovo Device [17aa:20f8]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
- Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin B routed to IRQ 44
- Region 0: I/O ports at 1c48 [size=8]
- Region 1: I/O ports at 183c [size=4]
- Region 2: I/O ports at 1c40 [size=8]
- Region 3: I/O ports at 1838 [size=4]
- Region 4: I/O ports at 1c20 [size=32]
- Region 5: Memory at f2826000 (32-bit, non-prefetchable) [size=2K]
- Capabilities: [80] MSI: Enable+ Count=1/16 Maskable- 64bit-
- Address: fee0300c Data: 4142
- Capabilities: [70] Power Management version 3
- Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot+,D3cold-)
- Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [a8] SATA HBA v1.0 BAR4 Offset=00000004
- Capabilities: [b0] PCI Advanced Features
- AFCap: TP+ FLR+
- AFCtrl: FLR-
- AFStatus: TP-
- Kernel driver in use: ahci
-
- 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 03)
- Subsystem: Lenovo Device [17aa:20f9]
- Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin A routed to IRQ 11
- Region 0: Memory at f2827400 (64-bit, non-prefetchable) [size=256]
- Region 4: I/O ports at 1c60 [size=32]
-
- 03:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 5100 AGN [Shiloh] Network Connection [8086:4237]
- Subsystem: Intel Corporation WiFi Link 5100 AGN [8086:1211]
- Physical Slot: 1-1
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx+
- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0, Cache Line Size: 64 bytes
- Interrupt: pin A routed to IRQ 47
- Region 0: Memory at f2500000 (64-bit, non-prefetchable) [size=8K]
- Capabilities: [c8] Power Management version 3
- Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
- Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME-
- Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
- Address: 00000000fee0100c Data: 4172
- Capabilities: [e0] Express (v1) Endpoint, MSI 00
- DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <512ns, L1 unlimited
- ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset+
- DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
- RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+ FLReset-
- MaxPayload 128 bytes, MaxReadReq 128 bytes
- DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
- LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency L0 <128ns, L1 <32us
- ClockPM+ Surprise- LLActRep- BwNot-
- LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
- ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
- LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
- Capabilities: [100 v1] Advanced Error Reporting
- UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol-
- UESvrt: DLP+ SDES- TLP- FCP+ CmpltTO- CmpltAbrt- UnxCmplt- RxOF+ MalfTLP+ ECRC- UnsupReq- ACSViol-
- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+
- AERCap: First Error Pointer: 00, GenCap- CGenEn- ChkCap- ChkEn-
- Capabilities: [140 v1] Device Serial Number 00-22-fa-ff-ff-34-1b-b6
- Kernel driver in use: iwlwifi
-
+ --
ProblemType: KernelOops
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-4-generic 3.11.0-4.9
ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
Uname: Linux 3.11.0-4-generic i686
Annotation: This occured during a previous suspend and prevented it from resuming properly.
ApportVersion: 2.12.1-0ubuntu3
Architecture: i386
AudioDevicesInUse:
- USER PID ACCESS COMMAND
- /dev/snd/controlC0: yositune 1980 F.... pulseaudio
+ USER PID ACCESS COMMAND
+ /dev/snd/controlC0: yositune 1980 F.... pulseaudio
Date: Wed Sep 4 12:43:40 2013
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
HibernationDevice: RESUME=UUID=35f991d5-89d2-4301-8938-fc43ecd9efd0
InstallationDate: Installed on 2012-07-13 (420 days ago)
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423)
InterpreterPath: /usr/bin/python3.3
MachineType: LENOVO 7453W75
MarkForUpload: True
ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
ProcEnviron:
- TERM=linux
- PATH=(custom, no user)
+ TERM=linux
+ PATH=(custom, no user)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=655415cc-7088-4dd4-a16e-33276f6f5c98 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding.
RelatedPackageVersions:
- linux-restricted-modules-3.11.0-4-generic N/A
- linux-backports-modules-3.11.0-4-generic N/A
- linux-firmware 1.113
+ linux-restricted-modules-3.11.0-4-generic N/A
+ linux-backports-modules-3.11.0-4-generic N/A
+ linux-firmware 1.113
SourcePackage: linux
Title: [LENOVO 7453W75] suspend/resume failure
UpgradeStatus: Upgraded to saucy on 2013-08-26 (10 days ago)
UserGroups:
-
+
dmi.bios.date: 02/03/2010
dmi.bios.vendor: LENOVO
dmi.bios.version: 7WET62WW (3.12 )
dmi.board.name: 7453W75
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr7WET62WW(3.12):bd02/03/2010:svnLENOVO:pn7453W75:pvrThinkPadX200Tablet:rvnLENOVO:rn7453W75:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 7453W75
dmi.product.version: ThinkPad X200 Tablet
dmi.sys.vendor: LENOVO
** Tags added: bios-outdated-3.21 needs-upstream-testing regression-
potential
** Changed in: linux (Ubuntu)
Status: Confirmed => Incomplete
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1221534
Title:
[LENOVO 7453W75] suspend/resume failure
Status in “linux” package in Ubuntu:
Incomplete
Bug description:
--
ProblemType: KernelOops
DistroRelease: Ubuntu 13.10
Package: linux-image-3.11.0-4-generic 3.11.0-4.9
ProcVersionSignature: Ubuntu 3.11.0-4.9-generic 3.11.0-rc7
Uname: Linux 3.11.0-4-generic i686
Annotation: This occured during a previous suspend and prevented it from resuming properly.
ApportVersion: 2.12.1-0ubuntu3
Architecture: i386
AudioDevicesInUse:
USER PID ACCESS COMMAND
/dev/snd/controlC0: yositune 1980 F.... pulseaudio
Date: Wed Sep 4 12:43:40 2013
ExecutablePath: /usr/share/apport/apportcheckresume
Failure: suspend/resume
HibernationDevice: RESUME=UUID=35f991d5-89d2-4301-8938-fc43ecd9efd0
InstallationDate: Installed on 2012-07-13 (420 days ago)
InstallationMedia: Ubuntu 12.04 LTS "Precise Pangolin" - Release i386 (20120423)
InterpreterPath: /usr/bin/python3.3
MachineType: LENOVO 7453W75
MarkForUpload: True
ProcCmdline: /usr/bin/python3 /usr/share/apport/apportcheckresume
ProcEnviron:
TERM=linux
PATH=(custom, no user)
ProcFB: 0 inteldrmfb
ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.11.0-4-generic root=UUID=655415cc-7088-4dd4-a16e-33276f6f5c98 ro quiet splash vt.handoff=7
PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: Daemon not responding.
RelatedPackageVersions:
linux-restricted-modules-3.11.0-4-generic N/A
linux-backports-modules-3.11.0-4-generic N/A
linux-firmware 1.113
SourcePackage: linux
Title: [LENOVO 7453W75] suspend/resume failure
UpgradeStatus: Upgraded to saucy on 2013-08-26 (10 days ago)
UserGroups:
dmi.bios.date: 02/03/2010
dmi.bios.vendor: LENOVO
dmi.bios.version: 7WET62WW (3.12 )
dmi.board.name: 7453W75
dmi.board.vendor: LENOVO
dmi.board.version: Not Available
dmi.chassis.asset.tag: No Asset Information
dmi.chassis.type: 10
dmi.chassis.vendor: LENOVO
dmi.chassis.version: Not Available
dmi.modalias: dmi:bvnLENOVO:bvr7WET62WW(3.12):bd02/03/2010:svnLENOVO:pn7453W75:pvrThinkPadX200Tablet:rvnLENOVO:rn7453W75:rvrNotAvailable:cvnLENOVO:ct10:cvrNotAvailable:
dmi.product.name: 7453W75
dmi.product.version: ThinkPad X200 Tablet
dmi.sys.vendor: LENOVO
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1221534/+subscriptions
References
