kernel-packages team mailing list archive
-
kernel-packages team
-
Mailing list archive
-
Message #125352
[Bug 1469937] Re: HP ProLiant m400 Server: kernel boot failed because of failed sata probe
Turns out the firmware on this server is a bit old(U-Boot 2013.04 (Oct 01 2014 - 15:18:17)), and the problem
doesn't exit on another server which firmware is U-Boot 2013.04 (Mar 26 2015 - 11:31:01).
** Changed in: linux (Ubuntu)
Status: Incomplete => Invalid
--
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1469937
Title:
HP ProLiant m400 Server: kernel boot failed because of failed sata
probe
Status in linux package in Ubuntu:
Invalid
Bug description:
1, upgrade to vivid from trysty
2, boot the server, then the following log in [1] can be observed
[1] kernel booting log
Starting kernel ...
L3C: 8MB
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.19.0-21-generic (buildd@beebe) (gcc version 4.9.2 (Ubuntu/Linaro 4.9.2-10ubuntu13) ) #21-Ubuntu SMP Sun Jun 14 18:34:06 UTC 2015 (Ubuntu 3.19.0-21.21-generic 3.19.8)
[ 0.000000] CPU: AArch64 Processor [500f0000] revision 0
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] efi: Getting EFI parameters from FDT:
[ 0.000000] efi: UEFI not found.
[ 0.000000] PERCPU: Embedded 14 pages/cpu @ffffffc7fff49000 s19968 r8192 d29184 u57344
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 8257536
[ 0.000000] Kernel command line: console=ttyS0,9600n8r ro
[ 0.000000] log_buf_len individual max cpu contribution: 4096 bytes
[ 0.000000] log_buf_len total cpu_extra contributions: 28672 bytes
[ 0.000000] log_buf_len min size: 16384 bytes
[ 0.000000] log_buf_len: 65536 bytes
[ 0.000000] early log buf free: 14868(90%)
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
[ 0.000000] Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.000000] Memory: 32942004K/33554432K available (7287K kernel code, 812K rwdata, 3180K rodata, 604K init, 743K bss, 612428K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vmalloc : 0xffffff8000000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbec0000000 - 0xffffffbee0000000 ( 512 MB actual)
[ 0.000000] PCI I/O : 0xffffffbffa000000 - 0xffffffbffb000000 ( 16 MB)
[ 0.000000] fixed : 0xffffffbffbdfd000 - 0xffffffbffbdff000 ( 8 KB)
[ 0.000000] modules : 0xffffffbffc000000 - 0xffffffc000000000 ( 64 MB)
[ 0.000000] memory : 0xffffffc000000000 - 0xffffffc800000000 ( 32768 MB)
[ 0.000000] .init : 0xffffffc000abb000 - 0xffffffc000b52000 ( 604 KB)
[ 0.000000] .text : 0xffffffc000080000 - 0xffffffc000abaf04 ( 10476 KB)
[ 0.000000] .data : 0xffffffc000b57000 - 0xffffffc000c22200 ( 813 KB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] Architected cp15 timer(s) running at 50.00MHz (phys).
[ 0.000002] sched_clock: 56 bits at 50MHz, resolution 20ns, wraps every 2748779069440ns
[ 0.000069] Console: colour dummy device 80x25
[ 0.000082] Calibrating delay loop (skipped), value calculated using timer frequency.. 100.00 BogoMIPS (lpj=500000)
[ 0.000087] pid_max: default: 32768 minimum: 301
[ 0.000114] Security Framework initialized
[ 0.000149] AppArmor: AppArmor initialized
[ 0.000151] Yama: becoming mindful.
[ 0.000218] Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000223] Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.000602] Initializing cgroup subsys memory
[ 0.000613] Initializing cgroup subsys devices
[ 0.000617] Initializing cgroup subsys freezer
[ 0.000621] Initializing cgroup subsys net_cls
[ 0.000624] Initializing cgroup subsys blkio
[ 0.000628] Initializing cgroup subsys perf_event
[ 0.000631] Initializing cgroup subsys net_prio
[ 0.000635] Initializing cgroup subsys hugetlb
[ 0.000653] ftrace: allocating 26186 entries in 103 pages
[ 0.011825] hw perfevents: enabled with arm/armv8-pmuv3 PMU driver, 5 counters available
[ 0.011839] EFI services will not be available.
[ 0.012826] CPU1: Booted secondary processor
[ 0.012830] Detected PIPT I-cache on CPU1
[ 0.012986] CPU2: Booted secondary processor
[ 0.012989] Detected PIPT I-cache on CPU2
[ 0.013131] CPU3: Booted secondary processor
[ 0.013133] Detected PIPT I-cache on CPU3
[ 0.013266] CPU4: Booted secondary processor
[ 0.013269] Detected PIPT I-cache on CPU4
[ 0.013410] CPU5: Booted secondary processor
[ 0.013412] Detected PIPT I-cache on CPU5
[ 0.013545] CPU6: Booted secondary processor
[ 0.013548] Detected PIPT I-cache on CPU6
[ 0.013687] CPU7: Booted secondary processor
[ 0.013689] Detected PIPT I-cache on CPU7
[ 0.013718] Brought up 8 CPUs
[ 0.013730] SMP: Total of 8 processors activated.
[ 0.014041] devtmpfs: initialized
[ 0.014210] evm: security.selinux
[ 0.014213] evm: security.SMACK64
[ 0.014215] evm: security.SMACK64EXEC
[ 0.014217] evm: security.SMACK64TRANSMUTE
[ 0.014218] evm: security.SMACK64MMAP
[ 0.014220] evm: security.ima
[ 0.014221] evm: security.capability
[ 0.014288] DMI not present or invalid.
[ 0.015620] NET: Registered protocol family 16
[ 0.041721] cpuidle: using governor ladder
[ 0.062855] cpuidle: using governor menu
[ 0.062873] vdso: 2 pages (1 code @ ffffffc000b5d000, 1 data @ ffffffc000b5c000)
[ 0.062891] hw-breakpoint: found 4 breakpoint and 4 watchpoint registers.
[ 0.063073] software IO TLB [mem 0x40ffc00000-0x4100000000] (4MB) mapped at [ffffffc0ffc00000-ffffffc0ffffffff]
[ 0.063098] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.063149] Serial: AMBA PL011 UART driver
[ 0.092496] vgaarb: loaded
[ 0.092912] SCSI subsystem initialized
[ 0.093060] usbcore: registered new interface driver usbfs
[ 0.093077] usbcore: registered new interface driver hub
[ 0.093106] usbcore: registered new device driver usb
[ 0.093502] NetLabel: Initializing
[ 0.093505] NetLabel: domain hash size = 128
[ 0.093507] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.093527] NetLabel: unlabeled traffic allowed by default
[ 0.093733] XGene: PCIe MSI driver v0.1
[ 0.093799] Switched to clocksource arch_sys_counter
[ 0.105421] AppArmor: AppArmor Filesystem Enabled
[ 0.108389] NET: Registered protocol family 2
[ 0.108637] TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.109303] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.109670] TCP: Hash tables configured (established 262144 bind 65536)
[ 0.109694] TCP: reno registered
[ 0.109702] UDP hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.109968] UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.110318] NET: Registered protocol family 1
[ 0.110432] Trying to unpack rootfs image as initramfs...
[ 0.643283] Freeing initrd memory: 25380K (ffffffc7ee736000 - ffffffc7effff000)
[ 0.643420] kvm [1]: Using HYP init bounce page @47d9f81000
[ 0.643500] kvm [1]: interrupt-controller@780c0000 IRQ5
[ 0.643620] kvm [1]: timer IRQ3
[ 0.643630] kvm [1]: Hyp mode initialized successfully
[ 0.644165] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.644188] Initialise system trusted keyring
[ 0.644241] audit: initializing netlink subsys (disabled)
[ 0.644274] audit: type=2000 audit(0.640:1): initialized
[ 0.644537] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.646908] zpool: loaded
[ 0.646914] zbud: loaded
[ 0.647165] VFS: Disk quotas dquot_6.5.2
[ 0.647224] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.648060] fuse init (API version 7.23)
[ 0.648294] Key type big_key registered
[ 0.648686] Key type asymmetric registered
[ 0.648692] Asymmetric key parser 'x509' registered
[ 0.648771] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.648829] io scheduler noop registered
[ 0.648835] io scheduler deadline registered (default)
[ 0.648891] io scheduler cfq registered
[ 0.649140] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.649151] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.649195] PCI host bridge /soc/pcie@1f500000 ranges:
[ 0.649200] No bus range found for /soc/pcie@1f500000, using [bus 00-ff]
[ 0.649208] MEM 0xa130000000..0xa1afffffff -> 0x30000000
[ 0.649236] xgene-pcie 1f500000.pcie: (rc) x8 gen-2 link up
[ 0.649293] xgene-pcie 1f500000.pcie: PCI host bridge to bus 0000:00
[ 0.649297] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.649302] pci_bus 0000:00: root bus resource [mem 0xa130000000-0xa1afffffff] (bus address [0x30000000-0xafffffff])
[ 0.663919] pci 0000:00:00.0: BAR 15: assigned [mem 0xa130000000-0xa1307fffff 64bit pref]
[ 0.663923] pci 0000:00:00.0: BAR 14: assigned [mem 0xa130800000-0xa1309fffff]
[ 0.663928] pci 0000:01:00.0: BAR 2: assigned [mem 0xa130000000-0xa1307fffff 64bit pref]
[ 0.664115] pci 0000:01:00.0: BAR 0: assigned [mem 0xa130800000-0xa1308fffff 64bit]
[ 0.664302] pci 0000:01:00.0: BAR 6: assigned [mem 0xa130900000-0xa1309fffff pref]
[ 0.664347] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 0.664353] pci 0000:00:00.0: bridge window [mem 0xa130800000-0xa1309fffff]
[ 0.664357] pci 0000:00:00.0: bridge window [mem 0xa130000000-0xa1307fffff 64bit pref]
[ 0.664438] pcieport 0000:00:00.0: Signaling PME through PCIe PME interrupt
[ 0.664442] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.664757] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 0.666978] console [ttyS0] disabled
[ 0.667007] 1c021000.serial: ttyS0 at MMIO 0x1c021000 (irq = 27, base_baud = 3125000) is a 16550A
[ 10.844289] console [ttyS0] enabled
[ 10.888469] brd: module loaded
[ 10.926227] loop: module loaded
[ 10.964239] libphy: Fixed MDIO Bus: probed
[ 11.013389] tun: Universal TUN/TAP device driver, 1.6
[ 11.074003] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 11.148284] PPP generic driver version 2.4.2
[ 11.199630] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 11.277990] ehci-pci: EHCI PCI platform driver
[ 11.331314] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 11.405488] ohci-pci: OHCI PCI platform driver
[ 11.458814] uhci_hcd: USB Universal Host Controller Interface driver
[ 11.535217] mousedev: PS/2 mouse device common for all mice
[ 11.602163] i2c /dev entries driver
[ 11.644061] platform soc:gpio_poweroff: Driver poweroff-gpio requests probe deferral
[ 11.737220] device-mapper: uevent: version 1.0.3
[ 11.792734] device-mapper: ioctl: 4.29.0-ioctl (2014-10-28) initialised: dm-devel@xxxxxxxxxx
[ 11.894072] Driver 'mmcblk' needs updating - please use bus_type methods
[ 11.974576] ledtrig-cpu: registered to indicate activity on CPUs
[ 12.046811] TCP: cubic registered
[ 12.086778] NET: Registered protocol family 10
[ 12.140462] NET: Registered protocol family 17
[ 12.193802] Key type dns_resolver registered
[ 12.245240] Loading compiled-in X.509 certificates
[ 12.304120] Loaded X.509 cert 'Magrathea: Glacier signing key: e15f231a166c64ce4f1e4e2628af477f6ef725aa'
[ 12.417953] registered taskstats version 1
[ 12.470230] Key type trusted registered
[ 12.526931] Key type encrypted registered
[ 12.575027] AppArmor: AppArmor sha1 policy hashing enabled
[ 12.640858] ima: No TPM chip found, activating TPM-bypass!
[ 12.706728] evm: HMAC attrs: 0x1
[ 12.745753] platform soc:gpio_poweroff: Driver poweroff-gpio requests probe deferral
[ 12.838725] /build/buildd/linux-3.19.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[ 12.942592] Freeing unused kernel memory: 604K (ffffffc000abb000 - ffffffc000b52000)
[ 13.035548] Freeing alternatives memory: 12K (ffffffc000b52000 - ffffffc000b55000)
Loading, please [ 13.146139] random: systemd-udevd urandom read with 1 bits of entropy available
wait...
starting version 219
[ 13.260972] xgene-ahci 1a800000.sata: can't request region for resource [mem 0x1f23a000-0x1f23a0ff]
[ 13.263634] mlx4_core: Mellanox ConnectX core driver v2.2-1 (Feb, 2014)
[ 13.263640] mlx4_core: Initializing 0000:01:00.0
[ 13.511613] xgene-ahci: probe of 1a800000.sata failed with error -16
[ 20.415105] mlx4_core 0000:01:00.0: PCIe BW is different than device's capability
[ 20.504928] mlx4_core 0000:01:00.0: PCIe link speed is 5.0GT/s, device supports 8.0GT/s
[ 20.601005] mlx4_core 0000:01:00.0: PCIe link width is x8, device supports x8
[ 20.686813] mlx4_core 0000:01:00.0: Found no xgene,msi phandle
[ 20.858281] platform soc:gpio_poweroff: Driver poweroff-gpio requests probe deferral
[ 20.860717] pps_core: LinuxPPS API ver. 1 registered
[ 20.860719] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[ 20.863075] PTP clock support registered
[ 20.874252] mlx4_en: Mellanox ConnectX HCA Ethernet driver v2.2-1 (Feb 2014)
[ 20.874886] mlx4_en 0000:01:00.0: registered PHC clock
[ 20.874947] mlx4_en 0000:01:00.0: Activating port:1
[ 20.892817] mlx4_en: 0000:01:00.0: Port 1: Using 64 TX rings
[ 20.892819] mlx4_en: 0000:01:00.0: Port 1: Using 4 RX rings
[ 20.892821] mlx4_en: 0000:01:00.0: Port 1: frag:0 - size:1518 prefix:0 stride:1536
[ 20.893092] mlx4_en: 0000:01:00.0: Port 1: Initializing port
[ 20.894568] mlx4_en 0000:01:00.0: Activating port:2
[ 20.904386] mlx4_en: 0000:01:00.0: Port 2: Using 64 TX rings
[ 20.904388] mlx4_en: 0000:01:00.0: Port 2: Using 4 RX rings
[ 20.904390] mlx4_en: 0000:01:00.0: Port 2: frag:0 - size:1518 prefix:0 stride:1536
[ 20.904630] mlx4_en: 0000:01:00.0: Port 2: Initializing port
[ 21.461432] mlx4_en: eth1: Link Up
Begin: Loading e[ 22.095484] mlx4_en: eth0: Link Up
ssential drivers ... done.
Begin: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Begin: Loading e[ 52.125818] hidraw: raw HID events driver (C) Jiri Kosina
ssential drivers[ 52.201240] usbcore: registered new interface driver usbhid
... done.
Beg[ 52.281213] usbhid: USB HID core driver
in: Running /scripts/init-premount ... done.
Begin: Mounting root file system ... Begin: Running /scripts/local-top ... done.
Gave up waiting for root device. Common problems:
- Boot args (cat /proc/cmdline)
- Check rootdelay= (did the system wait long enough?)
- Check root= (did the system wait for the right device?)
- Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/disk/by-label/cloudimg-rootfs does not exist. Dropping to a shell!
BusyBox v1.22.1 (Ubuntu 1:1.22.0-9ubuntu1) built-in shell (ash)
Enter 'help' for a list of built-in commands.
(initramfs)
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1469937/+subscriptions
References