kernel-packages team mailing list archive

Thread
Date
[Bug 1439780] Re: [Hyper-V] Fiber Channel critical target error

To: kernel-packages@xxxxxxxxxxxxxxxxxxx
From: Launchpad Bug Tracker <1439780@xxxxxxxxxxxxxxxxxx>
Date: Mon, 06 Jul 2015 15:44:34 -0000
Reply-to: Bug 1439780 <1439780@xxxxxxxxxxxxxxxxxx>
Sender: bounces@xxxxxxxxxxxxx
This bug was fixed in the package linux - 3.19.0-22.22

---------------
linux (3.19.0-22.22) vivid; urgency=low

  [ Brad Figg ]

  * Release Tracking Bug
    - LP: #1465755

  [ Tai Nguyen ]

  * SAUCE: power: reset: Add syscon reboot device node for APM X-Gene
    platform
    - LP: #1463211

  [ Upstream Kernel Changes ]

  * Revert "dm crypt: fix deadlock when async crypto algorithm returns
    -EBUSY"
    - LP: #1465696
  * Bluetooth: ath3k: Add a new ID 0cf3:e006 to ath3k list
    - LP: #1459934
  * cdc-acm: prevent infinite loop when parsing CDC headers.
    - LP: #1460657
  * (upstream) libata: Blacklist queued TRIM on all Samsung 800-series
    - LP: #1338706, #1449005
  * powerpc/powernv: Check image loaded or not before calling flash
    - LP: #1461553
  * ahci: avoton port-disable reset-quirk
    - LP: #1458617
  * Bluetooth: btusb: support public address configuration for ath3012
    - LP: #1459937
  * Bluetooth: btusb: Add setup callback for chip init on USB
    - LP: #1459937
  * Bluetooth: btusb: Add support for QCA ROME chipset family
    - LP: #1459937
  * Bluetooth: btusb: Fix incorrect type in qca_device_info
    - LP: #1459937
  * Bluetooth: btusb: Fix minor whitespace issue in QCA ROME device entries
    - LP: #1459937
  * Bluetooth: btusb: Add support for 0cf3:e007
    - LP: #1459937
  * storvsc: Set the SRB flags correctly when no data transfer is needed
    - LP: #1439780
  * vfs: read file_handle only once in handle_to_path
    - LP: #1416503
    - CVE-2015-1420
  * ozwpan: Use unsigned ints to prevent heap overflow
    - LP: #1463442
    - CVE-2015-4001
  * ozwpan: divide-by-zero leading to panic
    - LP: #1463445
    - CVE-2015-4003
  * ozwpan: Use proper check to prevent heap overflow
    - LP: #1463444
    - CVE-2015-4002
  * ozwpan: unchecked signed subtraction leads to DoS
    - LP: #1463444
    - CVE-2015-4002
  * enclosure: fix WARN_ON removing an adapter in multi-path devices
    - LP: #1415178
  * ASoC: tfa9879: Fix return value check in tfa9879_i2c_probe()
    - LP: #1465696
  * ASoC: samsung: s3c24xx-i2s: Fix return value check in
    s3c24xx_iis_dev_probe()
    - LP: #1465696
  * ASoC: dapm: Enable autodisable on SOC_DAPM_SINGLE_TLV_AUTODISABLE
    - LP: #1465696
  * ASoC: rt5677: add register patch for PLL
    - LP: #1465696
  * btrfs: unlock i_mutex after attempting to delete subvolume during send
    - LP: #1465696
  * ALSA: hda - Fix mute-LED fixed mode
    - LP: #1465696
  * ALSA: hda - Add mute-LED mode control to Thinkpad
    - LP: #1465696
  * arm64: dma-mapping: always clear allocated buffers
    - LP: #1465696
  * ALSA: emu10k1: Fix card shortname string buffer overflow
    - LP: #1465696
  * ALSA: emux: Fix mutex deadlock at unloading
    - LP: #1465696
  * drm/radeon: Use drm_calloc_ab for CS relocs
    - LP: #1465696
  * drm/radeon: adjust pll when audio is not enabled
    - LP: #1465696
  * drm/radeon: add SI DPM quirk for Sapphire R9 270 Dual-X 2G GDDR5
    - LP: #1465696
  * drm/radeon: fix lockup when BOs aren't part of the VM on release
    - LP: #1465696
  * drm/radeon: reset BOs address after clearing it.
    - LP: #1465696
  * drm/radeon: check new address before removing old one
    - LP: #1465696
  * SCSI: add 1024 max sectors black list flag
    - LP: #1465696
  * 3w-sas: fix command completion race
    - LP: #1465696
  * 3w-xxxx: fix command completion race
    - LP: #1465696
  * 3w-9xxx: fix command completion race
    - LP: #1465696
  * uas: Allow uas_use_uas_driver to return usb-storage flags
    - LP: #1465696
  * uas: Add US_FL_MAX_SECTORS_240 flag
    - LP: #1465696
  * uas: Set max_sectors_240 quirk for ASM1053 devices
    - LP: #1465696
  * usb: chipidea: otg: remove mutex unlock and lock while stop and start
    role
    - LP: #1465696
  * serial: xilinx: Use platform_get_irq to get irq description structure
    - LP: #1465696
  * serial: of-serial: Remove device_type = "serial" registration
    - LP: #1465696
  * tty/serial: at91: maxburst was missing for dma transfers
    - LP: #1465696
  * ALSA: emux: Fix mutex deadlock in OSS emulation
    - LP: #1465696
  * ACPI / SBS: Enable battery manager when present
    - LP: #1465696
  * ALSA: emu10k1: Emu10k2 32 bit DMA mode
    - LP: #1465696
  * ASoC: rt5677: fixed wrong DMIC ref clock
    - LP: #1465696
  * rbd: end I/O the entire obj_request on error
    - LP: #1465696
  * ext4: fix data corruption caused by unwritten and delayed extents
    - LP: #1465696
  * ext4: move check under lock scope to close a race.
    - LP: #1465696
  * powerpc/pseries: Correct cpu affinity for dlpar added cpus
    - LP: #1465696
  * powerpc/powernv: Restore non-volatile CRs after nap
    - LP: #1465696
  * efivarfs: Ensure VariableName is NUL-terminated
    - LP: #1465696
  * x86/efi: Store upper bits of command line buffer address in
    ext_cmd_line_ptr
    - LP: #1465696
  * blk-mq: fix race between timeout and CPU hotplug
    - LP: #1465696
  * blk-mq: fix CPU hotplug handling
    - LP: #1465696
  * writeback: use |1 instead of +1 to protect against div by zero
    - LP: #1465696
  * ARM: mvebu: armada-xp-openblocks-ax3-4: Disable internal RTC
    - LP: #1465696
  * ARM: dts: imx23-olinuxino: Fix polarity of LED GPIO
    - LP: #1465696
  * ARM: dts: imx23-olinuxino: Fix dr_mode of usb0
    - LP: #1465696
  * ARM: dts: imx6: phyFLEX: USB VBUS control is active-high
    - LP: #1465696
  * ARM: dts: imx25: Add #pwm-cells to pwm4
    - LP: #1465696
  * ARM: dts: imx28: Fix AUART4 TX-DMA interrupt name
    - LP: #1465696
  * marvell-ccic: fix Y'CbCr ordering
    - LP: #1465696
  * gpio: sysfs: fix memory leaks and device hotplug
    - LP: #1465696
  * ACPI / SBS: Add 5 us delay to fix SBS hangs on MacBook
    - LP: #1465696
  * ACPI / PNP: add two IDs to list for PNPACPI device enumeration
    - LP: #1465696
  * ARM: OMAP2+: Fix omap off idle power consumption creeping up
    - LP: #1465696
  * ARM: dts: OMAP3-N900: Add microphone bias voltages
    - LP: #1465696
  * drm/radeon: disable semaphores for UVD V1 (v2)
    - LP: #1465696
  * x86/spinlocks: Fix regression in spinlock contention detection
    - LP: #1465696
  * RDMA/CMA: Canonize IPv4 on IPV6 sockets properly
    - LP: #1465696
  * drm/i915: Assume dual channel LVDS if pixel clock necessitates it
    - LP: #1465696
  * drm/i915: Add missing MacBook Pro models with dual channel LVDS
    - LP: #1465696
  * efi: Fix error handling in add_sysfs_runtime_map_entry()
    - LP: #1465696
  * xen/events: Clear cpu_evtchn_mask before resuming
    - LP: #1465696
  * xen/xenbus: Update xenbus event channel on resume
    - LP: #1465696
  * xen/console: Update console event channel on resume
    - LP: #1465696
  * xen/events: Set irq_info->evtchn before binding the channel to CPU in
    __startup_pirq()
    - LP: #1465696
  * mm/memory-failure: call shake_page() when error hits thp tail page
    - LP: #1465696
  * mm: soft-offline: fix num_poisoned_pages counting on concurrent events
    - LP: #1465696
  * nilfs2: fix sanity check of btree level in nilfs_btree_root_broken()
    - LP: #1465696
  * ocfs2: dlm: fix race between purge and get lock resource
    - LP: #1465696
  * drm/i915/dp: there is no audio on port A
    - LP: #1465696
  * drm/amdkfd: allow unregister process with queues
    - LP: #1465696
  * drm/radeon: fix userptr BO unpin bug v3
    - LP: #1465696
  * drm/radeon: make VCE handle check more strict
    - LP: #1465696
  * drm/radeon: make UVD handle checking more strict
    - LP: #1465696
  * drm/radeon: more strictly validate the UVD codec
    - LP: #1465696
  * path_openat(): fix double fput()
    - LP: #1465696
  * mnt: Fix fs_fully_visible to verify the root directory is visible
    - LP: #1465696
  * drm: Zero out invalid vblank timestamp in drm_update_vblank_count.
    - LP: #1465696
  * ARM: ux500: Move GPIO regulator for SD-card into board DTSs
    - LP: #1465696
  * ARM: ux500: Enable GPIO regulator for SD-card for HREF boards
    - LP: #1465696
  * ARM: ux500: Enable GPIO regulator for SD-card for snowball
    - LP: #1465696
  * xen-pciback: Add name prefix to global 'permissive' variable
    - LP: #1465696
  * mmc: core: add missing pm event in mmc_pm_notify to fix hib restore
    - LP: #1465696
  * ARM: dts: am57xx-beagle-x15: Fix IRQ type for mcp7941x
    - LP: #1465696
  * mmc: sh_mmcif: Fix timeout value for command request
    - LP: #1465696
  * pinctrl: Don't just pretend to protect pinctrl_maps, do it for real
    - LP: #1465696
  * arm64: add missing PAGE_ALIGN() to __dma_free()
    - LP: #1465696
  * Linux 3.19.8-ckt1
    - LP: #1465696

 -- Brad Figg <brad.figg@xxxxxxxxxxxxx>  Tue, 16 Jun 2015 09:21:59 -0700

** Changed in: linux (Ubuntu Vivid)
       Status: Fix Committed => Fix Released

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1439780

Title:
  [Hyper-V] Fiber Channel critical target error

Status in linux package in Ubuntu:
  Fix Released
Status in linux source package in Vivid:
  Fix Released
Status in linux source package in Wily:
  Fix Released

Bug description:
  System details:
  Linux version 3.19.0-11-generic (apw@gloin) (gcc version 4.9.2 (Ubuntu 4.9.2-10ubuntu12) ) #11~lp1423343v201503311833 SMP Tue Mar 31 17:40:01 UTC 2015 (Ubuntu 3.19.0-11.11~lp1423343v201503311833-generic 3.19.3)

  Ubuntu 3.19.0-11
  Ubuntu Vivid 15.04 64bit custom kernel
  Platform: WS2012R2

  Using a fiber channel disk partition ( dev/sde1 in this example) outputs the following error:
  
  [ 1307.744496] blk_update_request: critical target error, dev sde, sector 0
  [ 1396.052488] blk_update_request: critical target error, dev sde, sector 0
  [ 1456.216570] blk_update_request: critical target error, dev sde, sector 0

  Creating a partition works, reading too, but first time writing it
  hangs for around 20 seconds and after a couple more writes the
  partition goes into read-only mode:

  #echo "test1" > test1.txt
  *hangs for 30 seconds*
  blk_update_request: critical target error, dev sde, sector 0
  # echo "test2" > test2.txt
  blk_update_request: critical target error, dev sde, sector 289671192
  Aborting journal on device sde1-8.
  EXT4-fs error (device sde1): ext4_journal_check_start:56: Detected aborted journal
  EXT4-fs (sde1): Remounting filesystem read-only
  # echo "test string" > sample.txt
  -bash: sample.txt: Read-only file system

  
  Dmesg log:
  [  461.284362] blk_update_request: critical target error, dev sde, sector 0
  [  484.845659] EXT4-fs (sde1): mounted filesystem with ordered data mode. Opts: (null)
  [  548.988377] blk_update_request: critical target error, dev sde, sector 0
  [  609.216340] blk_update_request: critical target error, dev sde, sector 289671192
  [  609.221812] Aborting journal on device sde1-8.
  [  612.237503] EXT4-fs error (device sde1): ext4_journal_check_start:56: Detected aborted journal
  [  612.249529] EXT4-fs (sde1): Remounting filesystem read-only

  Additional info:

  cat /proc/version_signature
  Ubuntu 3.19.0-11.11~lp1423343v201503311833-generic 3.19.3

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1439780/+subscriptions
References

[Bug 1439780] [NEW] [Hyper-V] Fiber Channel critical target error
From: Gergo Debreczeni, 2015-04-02