kernel-packages team mailing list archive

[Brad Figg <brad.figg@xxxxxxxxxxxxx>]

This bug is missing log files that will aid in diagnosing the problem.
>From a terminal window please run:

apport-collect 1222112

and then change the status of the bug to 'Confirmed'.

If, due to the nature of the issue you have encountered, you are unable
to run this command, please add a comment stating that fact and change
the bug status to 'Confirmed'.

This change has been made by an automated script, maintained by the
Ubuntu Kernel Team.

** Changed in: linux (Ubuntu)
       Status: New => Incomplete

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1222112

Title:
  coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

Status in “linux” package in Ubuntu:
  Incomplete

Bug description:
  Symptoms:
  Excessive fan use.
  Ran fine with Ubuntu Natty Narwhal, but successive upgrades resulted in both fans running full shortly after bootup (regression). I justified it thinking that Ubuntu had higher requirements, until infrequent failed attempts to boot finally resulted in the on-screen posting of "coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!" on Raring.

  Now on Saucy, although without any failed boots, I find the same
  error by checking dmesg:

   dmesg | grep coretemp
  [   47.314949] coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!
  [   47.314958] coretemp: Errata AE18 not fixed, update BIOS or microcode of the CPU!

  
  sudo lsmod | grep coretemp outputs coretemp               13195  0

  sudo sensors -s gives no output at the moment.

  I do have the coretemp listed to be loaded:

  cat /etc/modules
  # /etc/modules: kernel modules to load at boot time.
  #
  # This file contains the names of kernel modules that should be loaded
  # at boot time, one per line. Lines beginning with "#" are ignored.

  lp
  #speedstep_centrino # kernel's job now, cpu frequency scaling
  #acpi_cpufreq   # kernel's job now, cpu frequency scaling
  cpufreq_ondemand #responsive, cpu frequency scaling
  #cpufreq_conservative # slow, cpu frequency scaling

  ## Chip drivers , as per lm-sensors, sudo sensors-detect, and Psensor
  #coretemp
  lm63

  ## Used by macfanctld from https://launchpad.net/~mactel-support/+archive/ppa
  applesmc
  coretemp

  
  Comments & observations
  I do know Errata is code for defective firmware and that this has been dealt with prior http://lkml.org/lkml/2007/6/16/173 (thus this is a regression) and that I'm not alone:
  https://bbs.archlinux.org/viewtopic.php?id=143492
  http://ww.ubuntuforums.org/showthread.php?t=814314

  Interestingly, http://ubuntuforums.org/showthread.php?t=1239544
  mentions in passing " Intel's microcode update", which I find isn't
  applicable considering that my fans ran fine on Natty. I find the
  other suggestion, "put the following into /etc/rc.local" disconcerting
  considering that software is supposed to accommodate defective
  microcode and regularly does, but also that half a decade has come and
  gone with this issue.

  Still, it seems most plausible that the pertinent microcode is not
  loaded before the coretemp module jumps into action.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1222112/+subscriptions