← Back to team overview

kernel-packages team mailing list archive

[Bug 1475166] Re: Ubuntu 15.04 Install Error with Avago Controller

 

Hi Chris,

Sorry for the late replay.

We did install the kernel 3.19.0.22 in Ubuntu 14.10, and the OS is not able to boot up anymore.
Please check the messages as below, thanks!

1. The message from 14.10 with original kernel to 3.19.0.22 kernel
installation completion.

[    0.000000] OPAL V3 detected !
[    0.000000] Reserved memory: failed to reserve memory for node 'ibm,firmware-code@30000000': base 0x0000000030000000, size 2 MiB
[    0.000000] Reserved memory: failed to reserve memory for node 'ibm,firmware-data@30e00000': base 0x0000000030e00000, size 12 MiB
[    0.000000] Reserved memory: failed to reserve memory for node 'ibm,slw-image@7fda00000': base 0x00000007fda00000, size 1 MiB
[    0.000000] Reserved memory: failed to reserve memory for node 'ibm,slw-image@7fde00000': base 0x00000007fde00000, size 1 MiB
[    0.000000] Reserved memory: failed to reserve memory for node 'ibm,firmware-stacks@31a00000': base 0x0000000031a00000, size 128 MiB
[    0.000000] Reserved memory: failed to reserve memory for node 'ibm,firmware-allocs-memory@39a00000': base 0x0000000039a00000, size 54 MiB
[    0.000000] Reserved memory: failed to reserve memory for node 'ibm,firmware-heap@30200000': base 0x0000000030200000, size 12 MiB
[    0.000000] Allocated 4718592 bytes for 2048 pacas at c00000000fb80000
[    0.000000] Using PowerNV machine description
[    0.000000] Page sizes from device-tree:
[    0.000000] base_shift=12: shift=12, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=0
[    0.000000] base_shift=12: shift=16, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=7
[    0.000000] base_shift=12: shift=24, sllp=0x0000, avpnm=0x00000000, tlbiel=1, penc=56
[    0.000000] base_shift=16: shift=16, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=1
[    0.000000] base_shift=16: shift=24, sllp=0x0110, avpnm=0x00000000, tlbiel=1, penc=8
[    0.000000] base_shift=20: shift=20, sllp=0x0130, avpnm=0x00000000, tlbiel=0, penc=2
[    0.000000] base_shift=24: shift=24, sllp=0x0100, avpnm=0x00000001, tlbiel=0, penc=0
[    0.000000] base_shift=34: shift=34, sllp=0x0120, avpnm=0x000007ff, tlbiel=0, penc=3
[    0.000000] Page orders: linear mapping = 24, virtual = 16, io = 12, vmemmap = 24
[    0.000000] Using 1TB segments
[    0.000000] kvm_cma: CMA: reserved 1664 MiB
[    0.000000] Found initrd at 0xc000000003340000:0xc0000000047f2f83
[    0.000000] OPAL: Power8 LPC bus found, chip ID 0
[    0.000000] bootconsole [udbg0] enabled
[    0.000000] CPU maps initialized for 8 threads per core
[    0.000000]  (thread shift is 3)
[    0.000000] Freed 4325376 bytes for unused pacas
[    0.000000] Starting Linux PPC64 #31-Ubuntu SMP Tue Oct 21 17:55:08 UTC 2014
[    0.000000] -----------------------------------------------------
[    0.000000] ppc64_pft_size                = 0x0
[    0.000000] physicalMemorySize            = 0x800000000
[    0.000000] htab_address                  = 0xc0000007fe000000
[    0.000000] htab_hash_mask                = 0x3ffff
[    0.000000] -----------------------------------------------------
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.16.0-23-generic (buildd@fisher01) (gcc version 4.9.1 (Ubuntu 4.9.1-16ubuntu6) ) #31-Ubuntu SMP Tue Oct 21 17:55:08 UTC 2014 (Ubuntu 3.16.0-23.31-generic 3.16.4)
[    0.000000] [boot]0012 Setup Arch
[    0.000000] Node 0 Memory: 0x0-0x800000000
[    0.000000] Node 8 Memory:
[    0.000000] Initializing IODA2 OPAL PHB /pciex@3fffe40000000
[    0.000000] PCI host bridge /pciex@3fffe40000000 (primary) ranges:
[    0.000000]  MEM 0x00003fe000000000..0x00003fe07ffeffff -> 0x0000000080000000 
[    0.000000]   256 (000) PE's M32: 0x80000000 [segment=0x800000]
[    0.000000]                  M64: 0x1000000000 [segment=0x10000000]
[    0.000000]   Allocated bitmap for 2040 MSIs (base IRQ 0x800)
[    0.000000] Initializing IODA2 OPAL PHB /pciex@3fffe40100000
[    0.000000] PCI host bridge /pciex@3fffe40100000  ranges:
[    0.000000]  MEM 0x00003fe080000000..0x00003fe0fffeffff -> 0x0000000080000000 
[    0.000000]   256 (000) PE's M32: 0x80000000 [segment=0x800000]
[    0.000000]                  M64: 0x1000000000 [segment=0x10000000]
[    0.000000]   Allocated bitmap for 2040 MSIs (base IRQ 0x1000)
[    0.000000] Initializing IODA2 OPAL PHB /pciex@3fffe40200000
[    0.000000] PCI host bridge /pciex@3fffe40200000  ranges:
[    0.000000]  MEM 0x00003fe100000000..0x00003fe17ffeffff -> 0x0000000080000000 
[    0.000000]   256 (000) PE's M32: 0x80000000 [segment=0x800000]
[    0.000000]                  M64: 0x1000000000 [segment=0x10000000]
[    0.000000]   Allocated bitmap for 2040 MSIs (base IRQ 0x1800)
[    0.000000] Initializing IODA2 OPAL PHB /pciex@3fffe41000000
[    0.000000] PCI host bridge /pciex@3fffe41000000  ranges:
[    0.000000]  MEM 0x00003fe800000000..0x00003fe87ffeffff -> 0x0000000080000000 
[    0.000000]   256 (000) PE's M32: 0x80000000 [segment=0x800000]
[    0.000000]                  M64: 0x1000000000 [segment=0x10000000]
[    0.000000]   Allocated bitmap for 2040 MSIs (base IRQ 0x10800)
[    0.000000] Initializing IODA2 OPAL PHB /pciex@3fffe41100000
[    0.000000] PCI host bridge /pciex@3fffe41100000  ranges:
[    0.000000]  MEM 0x00003fe880000000..0x00003fe8fffeffff -> 0x0000000080000000 
[    0.000000]   256 (000) PE's M32: 0x80000000 [segment=0x800000]
[    0.000000]                  M64: 0x1000000000 [segment=0x10000000]
[    0.000000]   Allocated bitmap for 2040 MSIs (base IRQ 0x11000)
[    0.000000] Initializing IODA2 OPAL PHB /pciex@3fffe41200000
[    0.000000] PCI host bridge /pciex@3fffe41200000  ranges:
[    0.000000]  MEM 0x00003fe900000000..0x00003fe97ffeffff -> 0x0000000080000000 
[    0.000000]   256 (000) PE's M32: 0x80000000 [segment=0x800000]
[    0.000000]                  M64: 0x1000000000 [segment=0x10000000]
[    0.000000]   Allocated bitmap for 2040 MSIs (base IRQ 0x11800)
[    0.000000] OPAL nvram setup, 589824 bytes
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00000000-0x7ffffffff]
[    0.000000]   Normal   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x7ffffffff]
[    0.000000] On node 0 totalpages: 524288
[    0.000000]   DMA zone: 448 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 524288 pages, LIFO batch:1
[    0.000000] Could not find start_pfn for node 8
[    0.000000] On node 8 totalpages: 0
[    0.000000] [boot]0015 Setup Done
[    0.000000] PERCPU: Embedded 3 pages/cpu @c000000008000000 s103680 r0 d92928 u262144
[    0.000000] pcpu-alloc: s103680 r0 d92928 u262144 alloc=1*1048576
[    0.000000] pcpu-alloc: [0] 000 001 002 003 [0] 004 005 006 007 
[    0.000000] pcpu-alloc: [0] 008 009 010 011 [0] 012 013 014 015 
[    0.000000] pcpu-alloc: [0] 016 017 018 019 [0] 020 021 022 023 
[    0.000000] pcpu-alloc: [0] 024 025 026 027 [0] 028 029 030 031 
[    0.000000] pcpu-alloc: [0] 032 033 034 035 [0] 036 037 038 039 
[    0.000000] pcpu-alloc: [0] 040 041 042 043 [0] 044 045 046 047 
[    0.000000] pcpu-alloc: [0] 048 049 050 051 [0] 052 053 054 055 
[    0.000000] pcpu-alloc: [0] 056 057 058 059 [0] 060 061 062 063 
[    0.000000] pcpu-alloc: [0] 064 065 066 067 [0] 068 069 070 071 
[    0.000000] pcpu-alloc: [0] 072 073 074 075 [0] 076 077 078 079 
[    0.000000] pcpu-alloc: [0] 080 081 082 083 [0] 084 085 086 087 
[    0.000000] pcpu-alloc: [0] 088 089 090 091 [0] 092 093 094 095 
[    0.000000] pcpu-alloc: [0] 096 097 098 099 [0] 100 101 102 103 
[    0.000000] pcpu-alloc: [0] 104 105 106 107 [0] 108 109 110 111 
[    0.000000] pcpu-alloc: [0] 112 113 114 115 [0] 116 117 118 119 
[    0.000000] pcpu-alloc: [0] 120 121 122 123 [0] 124 125 126 127 
[    0.000000] pcpu-alloc: [0] 128 129 130 131 [0] 132 133 134 135 
[    0.000000] pcpu-alloc: [0] 136 137 138 139 [0] 140 141 142 143 
[    0.000000] pcpu-alloc: [0] 144 145 146 147 [0] 148 149 150 151 
[    0.000000] pcpu-alloc: [0] 152 153 154 155 [0] 156 157 158 159 
[    0.000000] Built 2 zonelists in Node order, mobility grouping on.  Total pages: 523840
[    0.000000] Policy zone: DMA
[    0.000000] Kernel command line: root=UUID=2832b036-7e29-4b9e-b675-f7d66bc329f0 ro splash quiet
[    0.000000] PID hash table entries: 4096 (order: -1, 32768 bytes)
[    0.000000] Sorting __ex_table...
[    0.000000] Memory: 31413056K/33554432K available (10304K kernel code, 1408K rwdata, 3324K rodata, 5632K init, 2802K bss, 2141376K reserved)
[    0.000000] SLUB: HWalign=128, Order=0-3, MinObjects=0, CPUs=160, Nodes=256
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU restricting CPUs from NR_CPUS=2048 to nr_cpu_ids=160.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=160
[    0.000000] NR_IRQS:512 nr_irqs:512 16
[    0.000000] ICS OPAL backend registered
[    0.000000] time_init: decrementer frequency = 512.000000 MHz
[    0.000000] time_init: processor frequency   = 2400.000000 MHz
[    0.000006] clocksource: timebase mult[1f40000] shift[24] registered
[    0.000015] clockevent: decrementer mult[83126e98] shift[32] cpu[80]
[    0.001034] Console: colour dummy device 80x25
[    0.001392] console [hvc0] enabled
[    0.001399] bootconsole [udbg0] disabled
[    0.022711] allocated 8388608 bytes of page_cgroup
[    0.022725] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.022991] mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
[    0.023006] pid_max: default: 163840 minimum: 1280
[    0.023324] Security Framework initialized
[    0.023543] AppArmor: AppArmor initialized
[    0.023548] Yama: becoming mindful.
[    0.024673] Dentry cache hash table entries: 4194304 (order: 9, 33554432 bytes)
[    0.071052] Inode-cache hash table entries: 2097152 (order: 8, 16777216 bytes)
[    0.093964] Mount-cache hash table entries: 65536 (order: 3, 524288 bytes)
[    0.093994] Mountpoint-cache hash table entries: 65536 (order: 3, 524288 bytes)
[    0.096611] Initializing cgroup subsys memory
[    0.096972] Initializing cgroup subsys devices
[    0.096999] Initializing cgroup subsys freezer
[    0.097014] Initializing cgroup subsys net_cls
[    0.097031] Initializing cgroup subsys blkio
[    0.097048] Initializing cgroup subsys perf_event
[    0.097088] Initializing cgroup subsys net_prio
[    0.097110] Initializing cgroup subsys hugetlb
[    0.097241] ftrace: allocating 26881 entries in 10 pages
[    0.131218] EEH: PowerNV platform initialized
[    0.131284] POWER8 performance monitor hardware support registered
[    0.327953] random: nonblocking pool is initialized
[    0.389487] Brought up 160 CPUs
[    0.389492] Node 0 CPUs: 0-7 88-159
[    0.389497] Node 8 CPUs: 8-87
[    0.414386] devtmpfs: initialized
[    0.432393] evm: security.selinux
[    0.432395] evm: security.SMACK64
[    0.432397] evm: security.SMACK64EXEC
[    0.432398] evm: security.SMACK64TRANSMUTE
[    0.432399] evm: security.SMACK64MMAP
[    0.432401] evm: security.ima
[    0.432402] evm: security.capability
[    0.432633] EEH: devices created
[    0.434934] regulator-dummy: no parameters
[    0.439164] NET: Registered protocol family 16
[    0.439236] IBM eBus Device Driver
[    0.439513] cpuidle: using governor ladder
[    0.439517] cpuidle: using governor menu
[    0.456747] PCI: Probing PCI hardware
[    0.456751] PCI: I/O resource not set for host bridge /pciex@3fffe40000000 (domain 0)
[    0.456801] PCI host bridge to bus 0000:00
[    0.456806] pci_bus 0000:00: root bus resource [mem 0x3fe000000000-0x3fe07ffeffff] (bus address [0x80000000-0xfffeffff])
[    0.456810] pci_bus 0000:00: root bus resource [mem 0x3b0010000000-0x3b0fffffffff 64bit pref]
[    0.456814] pci_bus 0000:00: root bus resource [bus 00-ff]
[    0.456819] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to ff
[    0.456857] pci 0000:00:00.0: [1014:03dc] type 01 class 0x060400
[    0.456996] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    0.457218] pci 0000:01:00.0: [1000:005d] type 00 class 0x010400
[    0.457247] pci 0000:01:00.0: reg 0x10: [io  0x0000-0x00ff]
[    0.457272] pci 0000:01:00.0: reg 0x14: [mem 0x3fe000200000-0x3fe00020ffff 64bit]
[    0.457297] pci 0000:01:00.0: reg 0x1c: [mem 0x3fe000000000-0x3fe0000fffff 64bit]
[    0.457327] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x000fffff pref]
[    0.457468] pci 0000:01:00.0: supports D1 D2
[    0.457597] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.457612] pci 0000:00:00.0:   bridge window [mem 0x3fe000000000-0x3fe0007fffff]
[    0.457669] pci_bus 0000:00: busn_res: [bus 00-ff] end is updated to 01
[    0.457678] PCI: I/O resource not set for host bridge /pciex@3fffe40100000 (domain 1)
[    0.457723] PCI host bridge to bus 0001:00
[    0.457727] pci_bus 0001:00: root bus resource [mem 0x3fe080000000-0x3fe0fffeffff] (bus address [0x80000000-0xfffeffff])
[    0.457731] pci_bus 0001:00: root bus resource [mem 0x3b1010000000-0x3b1fffffffff 64bit pref]
[    0.457733] pci_bus 0001:00: root bus resource [bus 00-ff]
[    0.457737] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to ff
[    0.457763] pci 0001:00:00.0: [1014:03dc] type 01 class 0x060400
[    0.457893] pci 0001:00:00.0: PME# supported from D0 D3hot D3cold
[    0.458083] pci 0001:01:00.0: [10b5:8718] type 01 class 0x060400
[    0.458113] pci 0001:01:00.0: reg 0x10: [mem 0x3fe082800000-0x3fe08283ffff]
[    0.458324] pci 0001:01:00.0: PME# supported from D0 D3hot D3cold
[    0.463430] pci 0001:00:00.0: PCI bridge to [bus 01-0b]
[    0.463445] pci 0001:00:00.0:   bridge window [mem 0x3fe080000000-0x3fe082ffffff]
[    0.463457] pci 0001:00:00.0:   bridge window [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.463624] pci 0001:02:01.0: [10b5:8718] type 01 class 0x060400
[    0.463861] pci 0001:02:01.0: PME# supported from D0 D3hot D3cold
[    0.463993] pci 0001:02:02.0: [10b5:8718] type 01 class 0x060400
[    0.464232] pci 0001:02:02.0: PME# supported from D0 D3hot D3cold
[    0.464376] pci 0001:02:03.0: [10b5:8718] type 01 class 0x060400
[    0.464616] pci 0001:02:03.0: PME# supported from D0 D3hot D3cold
[    0.464754] pci 0001:02:04.0: [10b5:8718] type 01 class 0x060400
[    0.464991] pci 0001:02:04.0: PME# supported from D0 D3hot D3cold
[    0.465106] pci 0001:01:00.0: PCI bridge to [bus 02-0b]
[    0.465123] pci 0001:01:00.0:   bridge window [mem 0x3fe080000000-0x3fe0827fffff]
[    0.465135] pci 0001:01:00.0:   bridge window [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.465359] pci 0001:02:01.0: PCI bridge to [bus 03-07]
[    0.465531] pci 0001:08:00.0: [104c:8241] type 00 class 0x0c0330
[    0.465573] pci 0001:08:00.0: reg 0x10: [mem 0x3fe080000000-0x3fe08000ffff 64bit]
[    0.465600] pci 0001:08:00.0: reg 0x18: [mem 0x3fe080010000-0x3fe080011fff 64bit]
[    0.465777] pci 0001:08:00.0: supports D1 D2
[    0.465779] pci 0001:08:00.0: PME# supported from D0 D1 D2 D3hot
[    0.471441] pci 0001:02:02.0: PCI bridge to [bus 08]
[    0.471458] pci 0001:02:02.0:   bridge window [mem 0x3fe080000000-0x3fe0807fffff]
[    0.471628] pci 0001:09:00.0: [1a03:1150] type 01 class 0x060400
[    0.471856] pci 0001:09:00.0: supports D1 D2
[    0.471858] pci 0001:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.471963] pci 0001:09:00.0: disabling ASPM on pre-1.1 PCIe device.  You can enable it with 'pcie_aspm=force'
[    0.471979] pci 0001:02:03.0: PCI bridge to [bus 09-0a]
[    0.471995] pci 0001:02:03.0:   bridge window [mem 0x3fe080800000-0x3fe081ffffff]
[    0.472177] pci 0001:0a:00.0: [1a03:2000] type 00 class 0x030000
[    0.472224] pci 0001:0a:00.0: reg 0x10: [mem 0x3fe081000000-0x3fe081ffffff]
[    0.472245] pci 0001:0a:00.0: reg 0x14: [mem 0x3fe080800000-0x3fe08081ffff]
[    0.472265] pci 0001:0a:00.0: reg 0x18: [io  0x0000-0x007f]
[    0.472435] pci 0001:0a:00.0: supports D1 D2
[    0.472437] pci 0001:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.472539] pci 0001:09:00.0: PCI bridge to [bus 0a]
[    0.472560] pci 0001:09:00.0:   bridge window [mem 0x3fe080800000-0x3fe081ffffff]
[    0.472754] pci 0001:0b:00.0: [14e4:165f] type 00 class 0x020000
[    0.472795] pci 0001:0b:00.0: reg 0x10: [mem 0x3b1010000000-0x3b101000ffff 64bit pref]
[    0.472823] pci 0001:0b:00.0: reg 0x18: [mem 0x3b1010010000-0x3b101001ffff 64bit pref]
[    0.472850] pci 0001:0b:00.0: reg 0x20: [mem 0x3b1010020000-0x3b101002ffff 64bit pref]
[    0.472869] pci 0001:0b:00.0: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.473057] pci 0001:0b:00.0: PME# supported from D0 D3hot D3cold
[    0.473205] pci 0001:0b:00.1: [14e4:165f] type 00 class 0x020000
[    0.473247] pci 0001:0b:00.1: reg 0x10: [mem 0x3b1010030000-0x3b101003ffff 64bit pref]
[    0.473274] pci 0001:0b:00.1: reg 0x18: [mem 0x3b1010040000-0x3b101004ffff 64bit pref]
[    0.473302] pci 0001:0b:00.1: reg 0x20: [mem 0x3b1010050000-0x3b101005ffff 64bit pref]
[    0.473320] pci 0001:0b:00.1: reg 0x30: [mem 0x00000000-0x0000ffff pref]
[    0.473509] pci 0001:0b:00.1: PME# supported from D0 D3hot D3cold
[    0.479453] pci 0001:02:04.0: PCI bridge to [bus 0b]
[    0.479470] pci 0001:02:04.0:   bridge window [mem 0x3fe082000000-0x3fe0827fffff]
[    0.479483] pci 0001:02:04.0:   bridge window [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.479555] pci_bus 0001:00: busn_res: [bus 00-ff] end is updated to 0b
[    0.479605] PCI: I/O resource not set for host bridge /pciex@3fffe40200000 (domain 2)
[    0.479651] PCI host bridge to bus 0002:00
[    0.479655] pci_bus 0002:00: root bus resource [mem 0x3fe100000000-0x3fe17ffeffff] (bus address [0x80000000-0xfffeffff])
[    0.479658] pci_bus 0002:00: root bus resource [mem 0x3b2010000000-0x3b2fffffffff 64bit pref]
[    0.479661] pci_bus 0002:00: root bus resource [bus 00-ff]
[    0.479665] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to ff
[    0.479691] pci 0002:00:00.0: [1014:03dc] type 01 class 0x060400
[    0.479824] pci 0002:00:00.0: PME# supported from D0 D3hot D3cold
[    0.479988] pci 0002:00:00.0: PCI bridge to [bus 01]
[    0.480022] pci_bus 0002:00: busn_res: [bus 00-ff] end is updated to 01
[    0.480025] PCI: I/O resource not set for host bridge /pciex@3fffe41000000 (domain 3)
[    0.480069] PCI host bridge to bus 0003:00
[    0.480073] pci_bus 0003:00: root bus resource [mem 0x3fe800000000-0x3fe87ffeffff] (bus address [0x80000000-0xfffeffff])
[    0.480076] pci_bus 0003:00: root bus resource [mem 0x3c0010000000-0x3c0fffffffff 64bit pref]
[    0.480079] pci_bus 0003:00: root bus resource [bus 00-ff]
[    0.480082] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to ff
[    0.480108] pci 0003:00:00.0: [1014:03dc] type 01 class 0x060400
[    0.480233] pci 0003:00:00.0: PME# supported from D0 D3hot D3cold
[    0.480391] pci 0003:00:00.0: PCI bridge to [bus 01]
[    0.480423] pci_bus 0003:00: busn_res: [bus 00-ff] end is updated to 01
[    0.480426] PCI: I/O resource not set for host bridge /pciex@3fffe41100000 (domain 4)
[    0.480473] PCI host bridge to bus 0004:00
[    0.480477] pci_bus 0004:00: root bus resource [mem 0x3fe880000000-0x3fe8fffeffff] (bus address [0x80000000-0xfffeffff])
[    0.480480] pci_bus 0004:00: root bus resource [mem 0x3c1010000000-0x3c1fffffffff 64bit pref]
[    0.480483] pci_bus 0004:00: root bus resource [bus 00-ff]
[    0.480486] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to ff
[    0.480511] pci 0004:00:00.0: [1014:03dc] type 01 class 0x060400
[    0.480637] pci 0004:00:00.0: PME# supported from D0 D3hot D3cold
[    0.480795] pci 0004:00:00.0: PCI bridge to [bus 01]
[    0.480827] pci_bus 0004:00: busn_res: [bus 00-ff] end is updated to 01
[    0.480830] PCI: I/O resource not set for host bridge /pciex@3fffe41200000 (domain 5)
[    0.480874] PCI host bridge to bus 0005:00
[    0.480878] pci_bus 0005:00: root bus resource [mem 0x3fe900000000-0x3fe97ffeffff] (bus address [0x80000000-0xfffeffff])
[    0.480881] pci_bus 0005:00: root bus resource [mem 0x3c2010000000-0x3c2fffffffff 64bit pref]
[    0.480883] pci_bus 0005:00: root bus resource [bus 00-ff]
[    0.480887] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to ff
[    0.480912] pci 0005:00:00.0: [1014:03dc] type 01 class 0x060400
[    0.481036] pci 0005:00:00.0: PME# supported from D0 D3hot D3cold
[    0.481193] pci 0005:00:00.0: PCI bridge to [bus 01]
[    0.481224] pci_bus 0005:00: busn_res: [bus 00-ff] end is updated to 01
[    0.481359] pci 0000:00:00.0: BAR 14: assigned [mem 0x3fe000000000-0x3fe0007fffff]
[    0.481362] pci 0000:00:00.0: BAR 13: can't assign io (size 0x1000)
[    0.481368] pci 0000:01:00.0: BAR 3: assigned [mem 0x3fe000000000-0x3fe0000fffff 64bit]
[    0.481386] pci 0000:01:00.0: BAR 6: assigned [mem 0x3fe000100000-0x3fe0001fffff pref]
[    0.481390] pci 0000:01:00.0: BAR 1: assigned [mem 0x3fe000200000-0x3fe00020ffff 64bit]
[    0.481406] pci 0000:01:00.0: BAR 0: can't assign io (size 0x100)
[    0.481410] pci 0000:00:00.0: PCI bridge to [bus 01]
[    0.481418] pci 0000:00:00.0:   bridge window [mem 0x3fe000000000-0x3fe0007fffff]
[    0.481431] pci_bus 0000:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.481434] pci_bus 0000:00: resource 4 [mem 0x3fe000000000-0x3fe07ffeffff]
[    0.481437] pci_bus 0000:00: resource 5 [mem 0x3b0010000000-0x3b0fffffffff 64bit pref]
[    0.481440] pci_bus 0000:01: resource 1 [mem 0x3fe000000000-0x3fe0007fffff]
[    0.481542] pci 0001:00:00.0: BAR 15: assigned [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481546] pci 0001:00:00.0: BAR 14: assigned [mem 0x3fe080000000-0x3fe082ffffff]
[    0.481549] pci 0001:00:00.0: BAR 13: can't assign io (size 0x1000)
[    0.481553] pci 0001:01:00.0: BAR 15: assigned [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481556] pci 0001:01:00.0: BAR 14: assigned [mem 0x3fe080000000-0x3fe0827fffff]
[    0.481559] pci 0001:01:00.0: BAR 0: assigned [mem 0x3fe082800000-0x3fe08283ffff]
[    0.481566] pci 0001:01:00.0: BAR 13: can't assign io (size 0x1000)
[    0.481570] pci 0001:02:04.0: BAR 15: assigned [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481573] pci 0001:02:02.0: BAR 14: assigned [mem 0x3fe080000000-0x3fe0807fffff]
[    0.481576] pci 0001:02:03.0: BAR 14: assigned [mem 0x3fe080800000-0x3fe081ffffff]
[    0.481579] pci 0001:02:04.0: BAR 14: assigned [mem 0x3fe082000000-0x3fe0827fffff]
[    0.481581] pci 0001:02:03.0: BAR 13: can't assign io (size 0x1000)
[    0.481584] pci 0001:02:01.0: PCI bridge to [bus 03-07]
[    0.481604] pci 0001:08:00.0: BAR 0: assigned [mem 0x3fe080000000-0x3fe08000ffff 64bit]
[    0.481623] pci 0001:08:00.0: BAR 2: assigned [mem 0x3fe080010000-0x3fe080011fff 64bit]
[    0.481641] pci 0001:02:02.0: PCI bridge to [bus 08]
[    0.481649] pci 0001:02:02.0:   bridge window [mem 0x3fe080000000-0x3fe0807fffff]
[    0.481664] pci 0001:09:00.0: BAR 14: assigned [mem 0x3fe080800000-0x3fe081ffffff]
[    0.481666] pci 0001:09:00.0: BAR 13: can't assign io (size 0x1000)
[    0.481670] pci 0001:0a:00.0: BAR 0: assigned [mem 0x3fe081000000-0x3fe081ffffff]
[    0.481679] pci 0001:0a:00.0: BAR 1: assigned [mem 0x3fe080800000-0x3fe08081ffff]
[    0.481687] pci 0001:0a:00.0: BAR 2: can't assign io (size 0x80)
[    0.481690] pci 0001:09:00.0: PCI bridge to [bus 0a]
[    0.481698] pci 0001:09:00.0:   bridge window [mem 0x3fe080800000-0x3fe081ffffff]
[    0.481711] pci 0001:02:03.0: PCI bridge to [bus 09-0a]
[    0.481719] pci 0001:02:03.0:   bridge window [mem 0x3fe080800000-0x3fe081ffffff]
[    0.481735] pci 0001:0b:00.0: BAR 0: assigned [mem 0x3b1010000000-0x3b101000ffff 64bit pref]
[    0.481754] pci 0001:0b:00.0: BAR 2: assigned [mem 0x3b1010010000-0x3b101001ffff 64bit pref]
[    0.481772] pci 0001:0b:00.0: BAR 4: assigned [mem 0x3b1010020000-0x3b101002ffff 64bit pref]
[    0.481791] pci 0001:0b:00.0: BAR 6: assigned [mem 0x3fe082000000-0x3fe08200ffff pref]
[    0.481794] pci 0001:0b:00.1: BAR 0: assigned [mem 0x3b1010030000-0x3b101003ffff 64bit pref]
[    0.481813] pci 0001:0b:00.1: BAR 2: assigned [mem 0x3b1010040000-0x3b101004ffff 64bit pref]
[    0.481831] pci 0001:0b:00.1: BAR 4: assigned [mem 0x3b1010050000-0x3b101005ffff 64bit pref]
[    0.481850] pci 0001:0b:00.1: BAR 6: assigned [mem 0x3fe082010000-0x3fe08201ffff pref]
[    0.481853] pci 0001:02:04.0: PCI bridge to [bus 0b]
[    0.481861] pci 0001:02:04.0:   bridge window [mem 0x3fe082000000-0x3fe0827fffff]
[    0.481867] pci 0001:02:04.0:   bridge window [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481877] pci 0001:01:00.0: PCI bridge to [bus 02-0b]
[    0.481885] pci 0001:01:00.0:   bridge window [mem 0x3fe080000000-0x3fe0827fffff]
[    0.481891] pci 0001:01:00.0:   bridge window [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481901] pci 0001:00:00.0: PCI bridge to [bus 01-0b]
[    0.481909] pci 0001:00:00.0:   bridge window [mem 0x3fe080000000-0x3fe082ffffff]
[    0.481915] pci 0001:00:00.0:   bridge window [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481924] pci_bus 0001:00: Some PCI device resources are unassigned, try booting with pci=realloc
[    0.481927] pci_bus 0001:00: resource 4 [mem 0x3fe080000000-0x3fe0fffeffff]
[    0.481930] pci_bus 0001:00: resource 5 [mem 0x3b1010000000-0x3b1fffffffff 64bit pref]
[    0.481933] pci_bus 0001:01: resource 1 [mem 0x3fe080000000-0x3fe082ffffff]
[    0.481936] pci_bus 0001:01: resource 2 [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481939] pci_bus 0001:02: resource 1 [mem 0x3fe080000000-0x3fe0827fffff]
[    0.481941] pci_bus 0001:02: resource 2 [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481944] pci_bus 0001:08: resource 1 [mem 0x3fe080000000-0x3fe0807fffff]
[    0.481947] pci_bus 0001:09: resource 1 [mem 0x3fe080800000-0x3fe081ffffff]
[    0.481950] pci_bus 0001:0a: resource 1 [mem 0x3fe080800000-0x3fe081ffffff]
[    0.481952] pci_bus 0001:0b: resource 1 [mem 0x3fe082000000-0x3fe0827fffff]
[    0.481955] pci_bus 0001:0b: resource 2 [mem 0x3b1010000000-0x3b101fffffff 64bit pref]
[    0.481971] pci 0002:00:00.0: PCI bridge to [bus 01]
[    0.481990] pci_bus 0002:00: resource 4 [mem 0x3fe100000000-0x3fe17ffeffff]
[    0.481992] pci_bus 0002:00: resource 5 [mem 0x3b2010000000-0x3b2fffffffff 64bit pref]
[    0.482007] pci 0003:00:00.0: PCI bridge to [bus 01]
[    0.482025] pci_bus 0003:00: resource 4 [mem 0x3fe800000000-0x3fe87ffeffff]
[    0.482028] pci_bus 0003:00: resource 5 [mem 0x3c0010000000-0x3c0fffffffff 64bit pref]
[    0.482043] pci 0004:00:00.0: PCI bridge to [bus 01]
[    0.482061] pci_bus 0004:00: resource 4 [mem 0x3fe880000000-0x3fe8fffeffff]
[    0.482064] pci_bus 0004:00: resource 5 [mem 0x3c1010000000-0x3c1fffffffff 64bit pref]
[    0.482078] pci 0005:00:00.0: PCI bridge to [bus 01]
[    0.482096] pci_bus 0005:00: resource 4 [mem 0x3fe900000000-0x3fe97ffeffff]
[    0.482099] pci_bus 0005:00: resource 5 [mem 0x3c2010000000-0x3c2fffffffff 64bit pref]
[    0.482104] pci 0000:00     : [PE# 001] Secondary bus 0 associated with PE#1
[    0.482339] pci 0000:01     : [PE# 002] Secondary bus 1 associated with PE#2
[    0.482573] pci 0001:00     : [PE# 002] Secondary bus 0 associated with PE#2
[    0.482807] pci 0001:01     : [PE# 003] Secondary bus 1 associated with PE#3
[    0.483041] pci 0001:02     : [PE# 004] Secondary bus 2 associated with PE#4
[    0.483274] pci 0001:03     : [PE# 005] Secondary bus 3 associated with PE#5
[    0.483511] pci 0001:08     : [PE# 006] Secondary bus 8 associated with PE#6
[    0.483744] pci 0001:09     : [PE# 007] Secondary bus 9 associated with PE#7
[    0.483977] pci 0001:0a     : [PE# 008] Secondary bus 10..10 associated with PE#8
[    0.484211] pci 0001:0b     : [PE# 001] Secondary bus 11 associated with PE#1
[    0.484445] pci 0002:00     : [PE# 001] Secondary bus 0 associated with PE#1
[    0.484679] pci 0002:01     : [PE# 002] Secondary bus 1 associated with PE#2
[    0.484911] pci 0003:00     : [PE# 001] Secondary bus 0 associated with PE#1
[    0.485144] pci 0003:01     : [PE# 002] Secondary bus 1 associated with PE#2
[    0.485376] pci 0004:00     : [PE# 001] Secondary bus 0 associated with PE#1
[    0.485608] pci 0004:01     : [PE# 002] Secondary bus 1 associated with PE#2
[    0.485840] pci 0005:00     : [PE# 001] Secondary bus 0 associated with PE#1
[    0.486072] pci 0005:01     : [PE# 002] Secondary bus 1 associated with PE#2
[    0.486982] PCI: Domain 0000 has 8 available 32-bit DMA segments
[    0.486983] PCI: 1 PE# for a total weight of 15
[    0.486986] pci 0000:01     : [PE# 002] Assign DMA32 space
[    0.486988] pci 0000:01     : [PE# 002] Setting up 32-bit TCE table at 0..80000000
[    0.546584] IOMMU table initialized, virtual merging enabled
[    0.546602] pci 0000:01     : [PE# 002] Enabling 64-bit DMA bypass
[    0.546606] PCI: Domain 0001 has 8 available 32-bit DMA segments
[    0.546608] PCI: 3 PE# for a total weight of 40
[    0.546610] pci 0001:0b     : [PE# 001] Assign DMA32 space
[    0.546612] pci 0001:0b     : [PE# 001] Setting up 32-bit TCE table at 0..80000000
[    0.604691] pci 0001:0b     : [PE# 001] Enabling 64-bit DMA bypass
[    0.604695] pci 0001:08     : [PE# 006] Assign DMA32 space
[    0.604697] pci 0001:08     : [PE# 006] Setting up 32-bit TCE table at 0..80000000
[    0.662986] pci 0001:08     : [PE# 006] Enabling 64-bit DMA bypass
[    0.662989] pci 0001:0a     : [PE# 008] Assign DMA32 space
[    0.662992] pci 0001:0a     : [PE# 008] Setting up 32-bit TCE table at 0..80000000
[    0.729253] pci 0001:0a     : [PE# 008] Enabling 64-bit DMA bypass
[    0.729261] PCI: Domain 0002 has 8 available 32-bit DMA segments
[    0.729263] PCI: 0 PE# for a total weight of 0
[    0.729266] PCI: Domain 0003 has 8 available 32-bit DMA segments
[    0.729268] PCI: 0 PE# for a total weight of 0
[    0.729270] PCI: Domain 0004 has 8 available 32-bit DMA segments
[    0.729272] PCI: 0 PE# for a total weight of 0
[    0.729274] PCI: Domain 0005 has 8 available 32-bit DMA segments
[    0.729275] PCI: 0 PE# for a total weight of 0
[    0.730325] EEH: PCI Enhanced I/O Error Handling Enabled
[    0.730407] PCI: Probing PCI hardware done
[    0.734394] DUMP: Failed to register kernel log buffer. rc = -1
[    0.742727] SYSPARAM: Opal sysparam node not found
[    0.748429] powernv-rng: Registering arch random hook.
[    0.762980] vgaarb: device added: PCI:0001:0a:00.0,decodes=io+mem,owns=none,locks=none
[    0.762987] vgaarb: loaded
[    0.762989] vgaarb: bridge control possible 0001:0a:00.0
[    0.763629] SCSI subsystem initialized
[    0.764198] libata version 3.00 loaded.
[    0.764263] usbcore: registered new interface driver usbfs
[    0.764278] usbcore: registered new interface driver hub
[    0.764321] usbcore: registered new device driver usb
[    0.764355] pps_core: LinuxPPS API ver. 1 registered
[    0.764356] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@xxxxxxxx>
[    0.764363] PTP clock support registered
[    0.765451] NetLabel: Initializing
[    0.765453] NetLabel:  domain hash size = 128
[    0.765454] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.765474] NetLabel:  unlabeled traffic allowed by default
[    0.766361] Switched to clocksource timebase
[    0.773714] AppArmor: AppArmor Filesystem Enabled
[    0.776898] NET: Registered protocol family 2
[    0.779558] TCP established hash table entries: 262144 (order: 5, 2097152 bytes)
[    0.781355] TCP bind hash table entries: 65536 (order: 4, 1048576 bytes)
[    0.782150] TCP: Hash tables configured (established 262144 bind 65536)
[    0.782259] TCP: reno registered
[    0.782300] UDP hash table entries: 16384 (order: 3, 524288 bytes)
[    0.782618] UDP-Lite hash table entries: 16384 (order: 3, 524288 bytes)
[    0.783578] NET: Registered protocol family 1
[    0.783733] PCI: CLS 0 bytes, default 128
[    0.783820] Trying to unpack rootfs image as initramfs...
[    1.285120] Freeing initrd memory: 21184K (c000000003340000 - c0000000047f0000)
[    1.302014] futex hash table entries: 65536 (order: 7, 8388608 bytes)
[    1.303952] Initialise system trusted keyring
[    1.303993] audit: initializing netlink subsys (disabled)
[    1.304039] audit: type=2000 audit(1.288:1): initialized
[    1.304767] HugeTLB registered 1 MB page size, pre-allocated 0 pages
[    1.304769] HugeTLB registered 16 MB page size, pre-allocated 0 pages
[    1.304771] HugeTLB registered 16 GB page size, pre-allocated 0 pages
[    1.307795] zpool: loaded
[    1.307799] zbud: loaded
[    1.308301] VFS: Disk quotas dquot_6.5.2
[    1.308449] Dquot-cache hash table entries: 8192 (order 0, 65536 bytes)
[    1.309692] fuse init (API version 7.23)
[    1.309912] msgmni has been set to 32768
[    1.310042] Key type big_key registered
[    1.310676] Key type asymmetric registered
[    1.310681] Asymmetric key parser 'x509' registered
[    1.310748] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    1.311162] io scheduler noop registered
[    1.311165] io scheduler deadline registered
[    1.311254] io scheduler cfq registered (default)
[    1.312608] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    1.312874] hvc0: raw protocol on /ibm,opal/consoles/serial@0 (boot console)
[    1.313277] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[    1.315568] Linux agpgart interface v0.103
[    1.320551] brd: module loaded
[    1.324364] loop: module loaded
[    1.325100] libphy: Fixed MDIO Bus: probed
[    1.325104] tun: Universal TUN/TAP device driver, 1.6
[    1.325105] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[    1.325189] tg3.c:v3.137 (May 11, 2014)
[    1.347092] tg3 0001:0b:00.0: Using 64-bit DMA iommu bypass
[    1.347376] tg3 0001:0b:00.0 eth0: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address b0:83:fe:c3:54:8d
[    1.347380] tg3 0001:0b:00.0 eth0: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    1.347383] tg3 0001:0b:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[    1.347386] tg3 0001:0b:00.0 eth0: dma_rwctrl[00000000] dma_mask[64-bit]
[    1.370851] tg3 0001:0b:00.1: Using 64-bit DMA iommu bypass
[    1.371091] tg3 0001:0b:00.1 eth1: Tigon3 [partno(BCM95720) rev 5720000] (PCI Express) MAC address b0:83:fe:c3:54:8e
[    1.371094] tg3 0001:0b:00.1 eth1: attached PHY is 5720C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
[    1.371097] tg3 0001:0b:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
[    1.371100] tg3 0001:0b:00.1 eth1: dma_rwctrl[00000000] dma_mask[64-bit]
[    1.371196] ibmveth: IBM Power Virtual Ethernet Driver 1.04
[    1.371212] ehea: IBM eHEA ethernet device driver (Release EHEA_0107)
[    1.371386] PPP generic driver version 2.4.2
[    1.371450] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.371467] ehci-pci: EHCI PCI platform driver
[    1.371494] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    1.371500] ohci-pci: OHCI PCI platform driver
[    1.371517] uhci_hcd: USB Universal Host Controller Interface driver
[    1.371576] xhci_hcd 0001:08:00.0: xHCI Host Controller
[    1.371586] xhci_hcd 0001:08:00.0: new USB bus registered, assigned bus number 1
[    1.371673] xhci_hcd 0001:08:00.0: Using 64-bit DMA iommu bypass
[    1.372065] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    1.372068] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.372071] usb usb1: Product: xHCI Host Controller
[    1.372074] usb usb1: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
[    1.372076] usb usb1: SerialNumber: 0001:08:00.0
[    1.372242] hub 1-0:1.0: USB hub found
[    1.372255] hub 1-0:1.0: 4 ports detected
[    1.372447] xhci_hcd 0001:08:00.0: xHCI Host Controller
[    1.372452] xhci_hcd 0001:08:00.0: new USB bus registered, assigned bus number 2
[    1.372503] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
[    1.372506] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    1.372509] usb usb2: Product: xHCI Host Controller
[    1.372511] usb usb2: Manufacturer: Linux 3.16.0-23-generic xhci_hcd
[    1.372514] usb usb2: SerialNumber: 0001:08:00.0
[    1.372658] hub 2-0:1.0: USB hub found
[    1.372669] hub 2-0:1.0: 4 ports detected
[    1.373097] mousedev: PS/2 mouse device common for all mice
[    1.373332] device-mapper: uevent: version 1.0.3
[    1.373551] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@xxxxxxxxxx
[    1.373603] powernv-cpufreq: ibm,pstate-min node not found
[    1.373605] powernv-cpufreq: powernv-cpufreq disabled. System does not support PState control
[    1.377393] powernv_idle_driver registered
[    1.377859] ledtrig-cpu: registered to indicate activity on CPUs
[    1.378012] TCP: cubic registered
[    1.378261] NET: Registered protocol family 10
[    1.379571] NET: Registered protocol family 17
[    1.379601] Key type dns_resolver registered
[    1.379952] Loading compiled-in X.509 certificates
[    1.382483] Loaded X.509 cert 'Magrathea: Glacier signing key: fd68c98468c58cefc45c244f35cd5b7f350a0709'
[    1.382516] registered taskstats version 1
[    1.388443] Key type trusted registered
[    1.392721] Key type encrypted registered
[    1.396758] AppArmor: AppArmor sha1 policy hashing enabled
[    1.396768] ima: No TPM chip found, activating TPM-bypass!
[    1.396818] evm: HMAC attrs: 0x1
[    1.397411] /build/buildd/linux-3.16.0/drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
[    1.405464] PM: Hibernation image not present or could not be loaded.
[    1.406130] Freeing unused kernel memory: 5632K (c000000000d60000 - c0000000012e0000)
[    1.444926] systemd-udevd[897]: starting version 208
[    1.489157] megasas: 06.803.01.00-rc1 Mon. Mar. 10 17:00:00 PDT 2014
[    1.489206] megasas: 0x1000:0x005d:0x1000:0x9361: bus 1:slot 0:func 0
[    1.489259] megaraid_sas 0000:01:00.0: Using 64-bit DMA iommu bypass
[    1.489266] megaraid_sas 0000:01:00.0: Using 32-bit DMA via iommu
[    1.489273] megaraid_sas 0000:01:00.0: set 32bit DMA maskand 32 bit consistent mask
[    1.489768] megasas: Waiting for FW to come to ready state
[    1.494124] megasas: FW now in Ready state
[    1.496628] megaraid_sas 0000:01:00.0: [scsi0]: FW supports<96> MSIX vector,Online CPUs: <160>,Current MSIX <96>
[    1.518115] megasas:IOC Init cmd success
[    1.542145] megasas: INIT adapter done
[    1.614122] megaraid_sas 0000:01:00.0: Controller type: MR,Memory size is: 1024MB
[    1.615266] scsi0 : LSI SAS based MegaRAID driver
[    1.615872] scsi 0:0:0:0: Direct-Access     AVAGO    MR9361-8i        4.30 PQ: 0 ANSI: 5
[    1.649400] scsi 0:2:0:0: Direct-Access     AVAGO    MR9361-8i        4.30 PQ: 0 ANSI: 5
[    1.665214] sd 0:2:0:0: Attached scsi generic sg0 type 0
[    1.665258] sd 0:2:0:0: [sda] 975699968 512-byte logical blocks: (499 GB/465 GiB)
[    1.665462] sd 0:2:0:0: [sda] Write Protect is off
[    1.665468] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
[    1.665560] sd 0:2:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[    1.668429]  sda: sda1 sda2 sda3
[    1.669356] sd 0:2:0:0: [sda] Attached SCSI disk
[    1.736606] EXT4-fs (sda2): INFO: recovery required on readonly filesystem
[    1.736612] EXT4-fs (sda2): write access will be enabled during recovery
[    2.140111] EXT4-fs (sda2): recovery complete
[    2.175755] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[    3.074715] init: plymouth-upstart-bridge main process (971) terminated with status 1
[    3.074750] init: plymouth-upstart-bridge main process ended, respawning
[    3.081447] init: plymouth-upstart-bridge main process (1000) terminated with status 1
[    3.081472] init: plymouth-upstart-bridge main process ended, respawning
[    3.091252] init: plymouth-upstart-bridge main process (1001) terminated with status 1
[    3.091316] init: plymouth-upstart-bridge main process ended, respawning
[    3.103379] init: plymouth-upstart-bridge main process (1011) terminated with status 1
[    3.103398] init: plymouth-upstart-bridge main process ended, respawning
[    3.111782] init: plymouth-upstart-bridge main process (1022) terminated with status 1
[    3.111811] init: plymouth-upstart-bridge main process ended, respawning
[    3.123000] init: plymouth-upstart-bridge main process (1026) terminated with status 1
[    3.123027] init: plymouth-upstart-bridge main process ended, respawning
[    3.131591] init: plymouth-upstart-bridge main process (1031) terminated with status 1
[    3.131616] init: plymouth-upstart-bridge main process ended, respawning
[    3.138864] init: plymouth-upstart-bridge main process (1032) terminated with status 1
[    3.138889] init: plymouth-upstart-bridge main process ended, respawning
[    3.147489] init: plymouth-upstart-bridge main process (1034) terminated with status 1
[    3.147513] init: plymouth-upstart-bridge main process ended, respawning
[    3.154771] init: plymouth-upstart-bridge main process (1035) terminated with status 1
[    3.154800] init: plymouth-upstart-bridge main process ended, respawning
[    3.163973] init: plymouth-upstart-bridge main process (1037) terminated with status 1
[    3.163998] init: plymouth-upstart-bridge respawning too fast, stopped
[    4.714454] Adding 19780544k swap on /dev/sda3.  Priority:-1 extents:1 across:19780544k FS
[    5.149536] EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
[    5.757535] init: openibd pre-start process (1065) terminated with status 3
[    5.871977] init: console-setup main process (1279) terminated with status 1
[    5.952305] systemd-udevd[1331]: starting version 208
[    6.131824] powernv_rng: Registered powernv hwrng.
[    6.175130] [drm] Initialized drm 1.1.0 20060810
[    6.192392] ast: probe of 0001:0a:00.0 failed with error -5
[    6.769711] audit: type=1400 audit(6.752:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=1405 comm="apparmor_parser"
[    6.770170] audit: type=1400 audit(6.756:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1405 comm="apparmor_parser"
[    6.770569] audit: type=1400 audit(6.756:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1405 comm="apparmor_parser"
[    7.212168] audit: type=1400 audit(7.196:5): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1517 comm="apparmor_parser"
[    7.212662] audit: type=1400 audit(7.196:6): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1517 comm="apparmor_parser"
[    7.213048] audit: type=1400 audit(7.196:7): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1517 comm="apparmor_parser"
[    7.264359] audit: type=1400 audit(7.248:8): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1406 comm="apparmor_parser"
[    7.265018] audit: type=1400 audit(7.248:9): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=1406 comm="apparmor_parser"
[    7.265560] audit: type=1400 audit(7.248:10): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=1406 comm="apparmor_parser"
[    7.730568] audit: type=1400 audit(7.716:11): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=1532 comm="apparmor_parser"
[    8.242048] init: openibd pre-start process (1779) terminated with status 3
[   10.424866] init: openibd pre-start process (2250) terminated with status 3
[   17.238862] systemd-logind[2656]: New seat seat0.
[   17.253479] systemd-logind[2656]: Failed to start unit user@1000.service: Unknown unit: user@1000.service
[   17.262794] systemd-logind[2656]: Failed to start user service: Unknown unit: user@1000.service
[   17.281152] systemd-logind[2656]: New session c1 of user fxn.
[   49.198840] usb 2-3: new SuperSpeed USB device number 2 using xhci_hcd
[   49.220341] usb 2-3: New USB device found, idVendor=8564, idProduct=1000
[   49.220346] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[   49.220349] usb 2-3: Product: Mass Storage Device
[   49.220352] usb 2-3: Manufacturer: JetFlash
[   49.220354] usb 2-3: SerialNumber: 20JXWDASQUG6B8YA
[   49.269495] usb-storage 2-3:1.0: USB Mass Storage device detected
[   49.269883] scsi1 : usb-storage 2-3:1.0
[   49.270049] usbcore: registered new interface driver usb-storage
[   49.286386] usbcore: registered new interface driver uas
[   50.650837] scsi 1:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
[   50.651359] sd 1:0:0:0: Attached scsi generic sg1 type 0
[   50.651849] sd 1:0:0:0: [sdb] 30851072 512-byte logical blocks: (15.7 GB/14.7 GiB)
[   50.652336] sd 1:0:0:0: [sdb] Write Protect is off
[   50.652341] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00
[   50.652830] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[   50.657623]  sdb: sdb1
[   50.659624] sd 1:0:0:0: [sdb] Attached SCSI removable disk
[  128.295784] audit_printk_skb: 18 callbacks suppressed
[  128.295790] audit: type=1400 audit(128.280:18): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/sbin/dhclient" pid=2782 comm="apparmor_parser"
[  128.296237] audit: type=1400 audit(128.280:19): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=2782 comm="apparmor_parser"
[  128.296622] audit: type=1400 audit(128.280:20): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=2782 comm="apparmor_parser"
[  128.548793] audit: type=1400 audit(128.532:21): apparmor="STATUS" operation="profile_replace" profile="unconfined" name="/usr/sbin/tcpdump" pid=2782 comm="apparmor_parser"
[  129.139088] init: openibd pre-start process (2929) terminated with status 3
[  129.215579] init: plymouth-stop pre-start process (3183) terminated with status 1
[  332.696780] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[  941.090436] usb 2-3: USB disconnect, device number 2
[  941.093274] sd 1:0:0:0: [sdb] Synchronizing SCSI cache
[  941.093348] sd 1:0:0:0: [sdb]  
[  941.093354] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 1033.327311] usb 2-3: new SuperSpeed USB device number 3 using xhci_hcd
[ 1033.348188] usb 2-3: New USB device found, idVendor=8564, idProduct=1000
[ 1033.348192] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1033.348195] usb 2-3: Product: Mass Storage Device
[ 1033.348198] usb 2-3: Manufacturer: JetFlash
[ 1033.348201] usb 2-3: SerialNumber: 20JXWDASQUG6B8YA
[ 1033.349184] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1033.349668] scsi2 : usb-storage 2-3:1.0
[ 1034.739051] scsi 2:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
[ 1034.739616] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 1034.740167] sd 2:0:0:0: [sdc] 30851072 512-byte logical blocks: (15.7 GB/14.7 GiB)
[ 1034.740659] sd 2:0:0:0: [sdc] Write Protect is off
[ 1034.740663] sd 2:0:0:0: [sdc] Mode Sense: 43 00 00 00
[ 1034.741144] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1034.745580]  sdc: sdc1
[ 1034.747543] sd 2:0:0:0: [sdc] Attached SCSI removable disk
[ 1041.611598] FAT-fs (sdb1): Directory bread(block 6712280) failed
[ 1041.616695] FAT-fs (sdb1): Directory bread(block 6712281) failed
[ 1041.622150] FAT-fs (sdb1): Directory bread(block 6712282) failed
[ 1041.629060] FAT-fs (sdb1): Directory bread(block 6712283) failed
[ 1041.634614] FAT-fs (sdb1): Directory bread(block 6712284) failed
[ 1041.640173] FAT-fs (sdb1): Directory bread(block 6712285) failed
[ 1041.647079] FAT-fs (sdb1): Directory bread(block 6712286) failed
[ 1041.652639] FAT-fs (sdb1): Directory bread(block 6712287) failed
[ 1041.658195] FAT-fs (sdb1): Directory bread(block 6712288) failed
[ 1041.665103] FAT-fs (sdb1): Directory bread(block 6712289) failed
[ 1055.217977] fat__get_entry: 38 callbacks suppressed
[ 1055.217981] FAT-fs (sdb1): Directory bread(block 30136) failed
[ 1055.223047] FAT-fs (sdb1): Directory bread(block 30137) failed
[ 1055.228267] FAT-fs (sdb1): Directory bread(block 30138) failed
[ 1055.235168] FAT-fs (sdb1): Directory bread(block 30139) failed
[ 1055.240722] FAT-fs (sdb1): Directory bread(block 30140) failed
[ 1055.246275] FAT-fs (sdb1): Directory bread(block 30141) failed
[ 1055.251827] FAT-fs (sdb1): Directory bread(block 30142) failed
[ 1055.257381] FAT-fs (sdb1): Directory bread(block 30143) failed
[ 1055.262934] FAT-fs (sdb1): Directory bread(block 30144) failed
[ 1055.269837] FAT-fs (sdb1): Directory bread(block 30145) failed
[ 1065.394286] fat__get_entry: 22 callbacks suppressed
[ 1065.394290] FAT-fs (sdb1): Directory bread(block 30136) failed
[ 1065.399194] FAT-fs (sdb1): Directory bread(block 30137) failed
[ 1065.404741] FAT-fs (sdb1): Directory bread(block 30138) failed
[ 1065.410294] FAT-fs (sdb1): Directory bread(block 30139) failed
[ 1065.417196] FAT-fs (sdb1): Directory bread(block 30140) failed
[ 1065.422752] FAT-fs (sdb1): Directory bread(block 30141) failed
[ 1065.428305] FAT-fs (sdb1): Directory bread(block 30142) failed
[ 1065.433858] FAT-fs (sdb1): Directory bread(block 30143) failed
[ 1065.439411] FAT-fs (sdb1): Directory bread(block 30144) failed
[ 1065.446315] FAT-fs (sdb1): Directory bread(block 30145) failed
[ 1077.327398] fat__get_entry: 54 callbacks suppressed
[ 1077.327405] FAT-fs (sdb1): Directory bread(block 30136) failed
[ 1077.331883] FAT-fs (sdb1): Directory bread(block 30137) failed
[ 1077.338627] FAT-fs (sdb1): Directory bread(block 30138) failed
[ 1077.344178] FAT-fs (sdb1): Directory bread(block 30139) failed
[ 1077.349730] FAT-fs (sdb1): Directory bread(block 30140) failed
[ 1077.355284] FAT-fs (sdb1): Directory bread(block 30141) failed
[ 1077.360836] FAT-fs (sdb1): Directory bread(block 30142) failed
[ 1077.367741] FAT-fs (sdb1): Directory bread(block 30143) failed
[ 1077.373296] FAT-fs (sdb1): Directory bread(block 30144) failed
[ 1077.378852] FAT-fs (sdb1): Directory bread(block 30145) failed
[ 1202.949277] usb 2-3: USB disconnect, device number 3
[ 1202.950454] sd 2:0:0:0: [sdc] Synchronizing SCSI cache
[ 1202.950507] sd 2:0:0:0: [sdc]  
[ 1202.950512] Result: hostbyte=DID_NO_CONNECT driverbyte=DRIVER_OK
[ 1205.134480] usb 2-3: new SuperSpeed USB device number 4 using xhci_hcd
[ 1205.156199] usb 2-3: New USB device found, idVendor=8564, idProduct=1000
[ 1205.156203] usb 2-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1205.156206] usb 2-3: Product: Mass Storage Device
[ 1205.156209] usb 2-3: Manufacturer: JetFlash
[ 1205.156212] usb 2-3: SerialNumber: 20JXWDASQUG6B8YA
[ 1205.157159] usb-storage 2-3:1.0: USB Mass Storage device detected
[ 1205.157506] scsi3 : usb-storage 2-3:1.0
[ 1206.537549] scsi 3:0:0:0: Direct-Access     JetFlash Transcend 16GB   1100 PQ: 0 ANSI: 6
[ 1206.537940] sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1206.538488] sd 3:0:0:0: [sdb] 30851072 512-byte logical blocks: (15.7 GB/14.7 GiB)
[ 1206.538959] sd 3:0:0:0: [sdb] Write Protect is off
[ 1206.538962] sd 3:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 1206.539429] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1206.543705]  sdb: sdb1
[ 1206.545716] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1276.076535] FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
[ 1991.748412] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1991.797229] JFS: nTxBlock = 8192, nTxLock = 65536
[ 1991.873214] ntfs: driver 2.1.30 [Flags: R/O MODULE].
[ 1991.920153] QNX4 filesystem 0.2.3 registered.
[ 1992.038108] raid6: altivecx1  5120 MB/s
[ 1992.106109] raid6: altivecx2  8778 MB/s
[ 1992.174111] raid6: altivecx4 12578 MB/s
[ 1992.242111] raid6: altivecx8  9538 MB/s
[ 1992.310126] raid6: int64x1   2206 MB/s
[ 1992.378113] raid6: int64x2   4401 MB/s
[ 1992.446113] raid6: int64x4   5933 MB/s
[ 1992.514119] raid6: int64x8   1694 MB/s
[ 1992.514121] raid6: using algorithm altivecx4 (12578 MB/s)
[ 1992.514123] raid6: using intx1 recovery algorithm
[ 1992.531215] xor: measuring software checksum speed
[ 1992.570112]    8regs     :  9264.000 MB/sec
[ 1992.610112]    8regs_prefetch:  8448.000 MB/sec
[ 1992.650118]    32regs    :  9872.000 MB/sec
[ 1992.690114]    32regs_prefetch:  8960.000 MB/sec
[ 1992.730108]    altivec   : 13536.000 MB/sec
[ 1992.730112] xor: using function: altivec (13536.000 MB/sec)
[ 1992.797625] Btrfs loaded
[ 1992.896631] EXT4-fs (sda1): VFS: Can't find ext4 filesystem
[ 1992.902793] EXT4-fs (sda1): VFS: Can't find ext4 filesystem
[ 1992.908953] EXT4-fs (sda1): VFS: Can't find ext4 filesystem
[ 1992.915116] FAT-fs (sda1): bogus number of reserved sectors
[ 1992.919840] FAT-fs (sda1): Can't find a valid FAT filesystem
[ 1992.926832] XFS (sda1): Invalid superblock magic number
[ 1992.929938] FAT-fs (sda1): bogus number of reserved sectors
[ 1992.934678] FAT-fs (sda1): Can't find a valid FAT filesystem
[ 1992.939118] VFS: Can't find a Minix filesystem V1 | V2 | V3 on device sda1.
[ 1992.956373] hfsplus: unable to find HFS+ superblock
[ 1992.957790] qnx4: no qnx4 filesystem (no root dir).
[ 1992.962533] You didn't specify the type of your ufs filesystem

mount -t ufs -o ufstype=sun|sunx86|44bsd|ufs2|5xbsd|old|hp|nextstep
|nextstep-cd|openstep ...

>>>WARNING<<< Wrong ufstype may corrupt your filesystem, default is ufstype=old
[ 1992.962723] ufs_read_super: bad magic number
[ 1992.965676] hfs: can't find a HFS filesystem on dev sda1

2. The message that we reset OS after installation of 3.19 kernel. And
the OS never boot up

[42547996242,3] OPAL: Trying a CPU re-init with flags: 0x2
 -> smp_release_cpus()
spinning_secondaries = 159
 <- smp_release_cpus()
 <- setup_system()
[43255524259,3] OPAL: Called with bad token 101 !
[    0.717328] SYSPARAM: Opal sysparam node not found
[45024115955,3] BT seq 0x09 cmd 0x48: Retry sending message
[46562260726,3] BT seq 0x09 cmd 0x48: Timeout sending message
[    7.191895] rtc (null): read_time: fail to read
[48202956615,3] BT seq 0x0a cmd 0x48: Retry sending message
[49741113231,3] BT seq 0x0a cmd 0x48: Timeout sending message
[   13.399898] rtc rtc0: read_time: fail to read
[   13.402991] rtc-opal opal-rtc: hctosys: unable to read the hardware clock


Gave up waiting for root device.  Common problems:
 - Boot args (cat /proc/cmdline)
   - Check rootdelay= (did the system wait long enough?)
   - Check root= (did the system wait for the right device?)
 - Missing modules (cat /proc/modules; ls /dev)
ALERT!  /dev/disk/by-uuid/2832b036-7e29-4b9e-b675-f7d66bc329f0 does not exist.  Dropping to a shell!


BusyBox v1.22.1 (Ubuntu 1:1.22.0-8ubuntu1) built-in shell (ash)
Enter 'help' for a list of built-in commands.

(initramfs) 
(initramfs) 
(initramfs) 
(initramfs) 


Regards,
Boga

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1475166

Title:
  Ubuntu 15.04 Install Error with Avago Controller

Status in linux package in Ubuntu:
  Incomplete

Bug description:
  Hello Canonical Team

  We are running to an issue installing ubuntu PPC64LE 15.04 full blown
  image on our servers  (with RAID controller).  Installation hangs
  around 70% of progress.

  An important part of our configuration is Avago RAID controller:
  9361-8i Firmware version we used is 4.300.00-4429, and the package is
  24.10.0-0002.

  IMPORTANT: It has to be noted that with same hardware configuration
  14.10 full blown image installs fine.

  Dmesg logs are attached:

  Looking at dmesg logs point out that:
  LSI (avago) driver loads fine
  During further interaction with raid volume during the installation process, firmware errors are seen 
  [  196.991417] megasas: FW status 0x3

  [  196.999376] megasas: FW status 0x3

  [  197.007376] megasas: FW status 0x3
  Further down the  process I/O errors are thrown
  [  217.438664] Buffer I/O error on device sda2, logical block 22052864

  [  217.438671] Buffer I/O error on device sda2, logical block 22052865

  [  217.438678] Buffer I/O error on device sda2, logical block 22052866

  [  217.438686] Buffer I/O error on device sda2, logical block 22052867

  Full dmesg log is attached. Snippet is pasted below highlighting:

  It can be noted that there’s a Mellanox Connectx 3 pro card with some test Firmware on our setup. 
  We can Ignore any diagnostic messages from that card in dmesg logs for the purpose of this bug. 

  Thanks
  Adi Gangidi

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1475166/+subscriptions


References