← Back to team overview

kernel-packages team mailing list archive

[Bug 1394368] Re: Bluetooth with AR9462 doesn't work (New ID /Firmware)

 

Jukka,

For the moment : assuming you have the same harware as me as far as
Bluetooth is concerned (we both have a Acer Aspire V3-371).

The right firmware files for this chipset have normally been found
(thanks arty). However, unfortunately, they won't be included in Ubuntu
for the moment for licensing issues.

A patch exists to make the driver recognise the chipset and was included
in upstream kernel (version 4.2). It probably won't reach Ubuntu until
next release.

Here are some commands to be entered in a terminal to work around the
issue. They should download and install the right firrmware files for
your Bluetooth chipset and a patched driver which recognises your
chipset.

wget https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1394368/+attachment/4264502/+files/ar9462-dkms_1.5.1_all.deb
wget https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453553/+files/AthrBT_0x11020100.dfu
wget https://bugs.launchpad.net/ubuntu/+source/linux-lts-utopic/+bug/1462614/+attachment/4453554/+files/ramps_0x11020100_40.dfu
sudo mv AthrBT_0x11020100.dfu /lib/firmware/ar3k/
sudo mv ramps_0x11020100_40.dfu /lib/firmware/ar3k/
sudo dpkg -i ar9462-dkms_1.5.1_all.deb
sudo apt-get -f install

You might need to reboot. Please tell us if that works.

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux-firmware in Ubuntu.
https://bugs.launchpad.net/bugs/1394368

Title:
  Bluetooth with AR9462 doesn't work (New ID /Firmware)

Status in linux package in Ubuntu:
  Fix Released
Status in linux-firmware package in Ubuntu:
  Confirmed
Status in linux source package in Vivid:
  Fix Released
Status in linux-firmware source package in Vivid:
  Confirmed

Bug description:
  This is (kind of) a duplicate of:
  https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1024884
  (please read)

  I can't use Bluetooth with my AR9462 WLAN/BT-Combo.
  In the link above, it has been fixed, but not for my Adapter ID/Firmware:

  System:
  Ubuntu 14.10 utopic 64bit - 3.16.0-24-generic x86_64

  lspci -nnk
  02:00.0 Network controller [0280]: Qualcomm Atheros AR9462
  Wireless Network Adapter [168c:0034] (rev 01)
   Subsystem: Lite-On Communications Inc Device [11ad:0802]
   Kernel driver in use: ath9k

  lsusb (identified Bluetooth Device)
  Bus 002 Device 003: ID 04ca:300d Lite-On Technology Corp.

  ath9k.conf
  options ath9k btcoex_enable=1

  The "04ca:300d" ID is not in the Kernel, so i added it via dkms.

  I took ath3k.c and btusb.c out of the 3.16.0-24-generic source files
  and changed them:

  diff -urN ./linux-3.16.0/drivers/bluetooth/ath3k.c /usr/src/ar9462-1.5.1/ath3k.c
  --- ./linux-3.16.0/drivers/bluetooth/ath3k.c	2014-08-04 00:25:02.000000000 +0200
  +++ /usr/src/ar9462-1.5.1/ath3k.c	2014-11-19 21:12:46.646265890 +0100
  @@ -85,6 +85,7 @@
    { USB_DEVICE(0x04CA, 0x3007) },
    { USB_DEVICE(0x04CA, 0x3008) },
    { USB_DEVICE(0x04CA, 0x300b) },
  +	{ USB_DEVICE(0x04CA, 0x300d) },
    { USB_DEVICE(0x0930, 0x0219) },
    { USB_DEVICE(0x0930, 0x0220) },
    { USB_DEVICE(0x0b05, 0x17d0) },
  @@ -134,6 +135,7 @@
    { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
  +	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },

  diff -urN ./linux-3.16.0/drivers/bluetooth/btusb.c /usr/src/ar9462-1.5.1/btusb.c
  --- ./linux-3.16.0/drivers/bluetooth/btusb.c	2014-08-04 00:25:02.000000000 +0200
  +++ /usr/src/ar9462-1.5.1/btusb.c	2014-11-19 21:12:46.646265890 +0100
  @@ -157,6 +157,7 @@
    { USB_DEVICE(0x04ca, 0x3007), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x04ca, 0x3008), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x04ca, 0x300b), .driver_info = BTUSB_ATH3012 },
  +	{ USB_DEVICE(0x04ca, 0x300d), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x0930, 0x0219), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x0930, 0x0220), .driver_info = BTUSB_ATH3012 },
    { USB_DEVICE(0x0b05, 0x17d0), .driver_info = BTUSB_ATH3012 },

  sudo dkms add -m ar9462 -v 1.5.1
  sudo dkms build -m ar9462 -v 1.5.1
  sudo dkms install -m ar9462 -v 1.5.1

  (DKMS package in the same style/versioning as in the bug report above)

  dkms status
  ar9462, 1.5.1, 3.16.0-24-generic, x86_64: installed

  Now the new output:

  dmesg | egrep 'ath3|ar3|Bluet'
  [    2.787819] Bluetooth: Core ver 2.19
  [    2.787833] Bluetooth: HCI device and connection manager initialized
  [    2.787839] Bluetooth: HCI socket layer initialized
  [    2.787842] Bluetooth: L2CAP socket layer initialized
  [    2.787848] Bluetooth: SCO socket layer initialized
  [    2.793551] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
  [    2.793554] Bluetooth: BNEP filters: protocol multicast
  [    2.793561] Bluetooth: BNEP socket layer initialized
  [    3.130779] Bluetooth: Patch file not found ar3k/AthrBT_0x11020100.dfu
  [    3.130783] Bluetooth: Loading patch file failed
  [    3.130788] ath3k: probe of 2-5:1.0 failed with error -12
  [    3.130823] usbcore: registered new interface driver ath3k
  [    9.776503] Bluetooth: RFCOMM TTY layer initialized
  [    9.776512] Bluetooth: RFCOMM socket layer initialized
  [    9.776517] Bluetooth: RFCOMM ver 1.11

  My patch works, but just like in the bug report above, a Firmware file is missing:
  AthrBT_0x11020100.dfu

  I found it neither in linux-firmware (http://git.kernel.org/cgit/linux/kernel/git/firmware/linux-firmware.git/tree/ar3k)
  nor elsewhere.

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1394368/+subscriptions


References