← Back to team overview

kernel-packages team mailing list archive

[Bug 1489292] Re: System cannot detect USB device in BAT mode

 

** Tags added: kernel-acpi

** Changed in: linux (Ubuntu)
       Status: Confirmed => Triaged

-- 
You received this bug notification because you are a member of Kernel
Packages, which is subscribed to linux in Ubuntu.
https://bugs.launchpad.net/bugs/1489292

Title:
  System cannot detect USB device in BAT mode

Status in HWE Next:
  Triaged
Status in linux package in Ubuntu:
  Triaged

Bug description:
  [Impact]

  On some Skylake-U platforms, if boots with battery only and has no USB
  device connect, after boot the USB port can't be used, even though the
  xHCI Host Controller doesn't report any error in dmesg. The USB device
  looks like doesn't turn on, LED on USB mouse or keyboard doesn't light
  up.

  [Fix]

  There's a fix in mainline v4.2-rc3, though it states the fix is for
  Braswell, but the uuid use in the commit can also be found on
  Skylake-U platforms.

  Commit log is as follows:

  commit c3c5819a350952439c3198aa46581f9e4c46557f
  Author: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
  Date:   Tue Jul 21 17:20:25 2015 +0300

      xhci: call BIOS workaround to enable runtime suspend on Intel
  Braswell

      Intel xhci hw that require XHCI_PME_STUCK quirk have as default disabled
      xhci from going to D3 state in runtime suspend. Driver needs to verify
      it can deal with the hw by calling an ACPI _DSM method to get D3 enabled.

      Signed-off-by: Mathias Nyman <mathias.nyman@xxxxxxxxxxxxxxx>
      Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>

  [Test]

  1. Install the patched kernel
  2. Boot with battery
  3. Insert a USB device (disk, keyboard, mouse), should work normally

To manage notifications about this bug go to:
https://bugs.launchpad.net/hwe-next/+bug/1489292/+subscriptions


References